Unable to connect satellite Pro 6000 network

Similar Questions

• Unable to connect Satellite Pro TV using 4pin mini taken to a SCART

  I am trying to output movies from my laptop to a TV, but when I go to my Nividia Control Panel, it is not a TV option.
  I take TV out the plug to Mini DIN 4 pin for a RUMBLE to the converter SCART and then on television, but could not get anything on TV.

  Is that the debate in this link help?

  http://forums.nvidia.com/lofiversion/index.php?t41216.html

  The consensus seems to be to re - start with the TV attached. Most other considerations.

• Satellite L650 - unable to connect to the public network (has no valid IP address)

  Hello

  Toshiba satellite L650 laptop computer (with windows 7 64-bit), I bought two days back and I'm unable to connect to the public network. Sometimes, it must be connected to the public network and after a few minutes it disconnects. I get the message "wireless network doesn't have a valid IP configuration him."

  I have visited many forums and did everything, but of no use.

  1. people with disabilities the tcp/ip V6 of the registry.
  2. the DHCP is enabled. With the help of the automatic IP (DHCP)
  3. also tried with a static IP configuration.
  4. uninstalled the antivirus provided with laptop computer (Norton).
  5 disabled the windows firewall.
  6. restored to factory settings.

  I called Toshiba Tech support as well and they have suggested that it may be a problem of H/W but I don't think that so that it can be hardware problem because sometimes he must be connected to the public network. Now I'm left with no option except return the laptop to Toshiba (I'm less interested in this because I know that sending laptop for replacement will be more frustrating).

  Can someone please give some other suggestions for this problem?

  Hey,.

  Can you connect to your home WIFI router correctly?

  If you have problems with the public network connection, you should ask the owner of these networks. Usually, there is always a contact, you can ask if you have any problems with the connection.

  What you can try is updated WLAN driver from Toshiba's official website:
  http://APS2.toshiba-tro.de/WLAN/

  If it doesn't work, ask the person contact I mentioned.

• Satellite Pro 6000; sleep function does not work after upgrade W98 SE to XP

  I bought a windows XP cd and installed on W98 on my Satellite Pro 6000. The sleep function does not work now. I probably need a software of Toshiba. What do I need? Where can I find? What is the order of installation?

  Hello

  All drivers Windows XP Home edition, tools and utilities you can find on Toshiba support page under http://eu.computers.toshiba-europe.com > support & downloads. You have old laptop model and because of this type of product, you choose option ARCHIVE.

  Order of the facilities is as follows:
  -Windows XP
  -Display driver
  -Audio driver
  Toshiba - common modules
  -SD Card host driver
  -SD Card Driver
  -BlueTooth Stack
  BlueTooth - Easy Connect
  -Mouse driver
  -Modem driver
  -LAN driver included with Windows XP
  -Infrared driver
  -Toshiba Power Saver
  Utilities - Toshiba
  Toshiba - post Mobile
  -Toshiba Console worm.
  -Toshiba Hotkey for display devices

  I hope that you will be able to install Windows XP Home edition successfully.

  Good luck!

• Change of CPU on Satellite Pro 6000

  Hello

  I just got back a Satellite of 6000 Pro with a broken RAM Socket. I wanted to put the P3M CPU in another Satellite Pro 6000 that currently contains only a Celeron. The physical Exchange was no problem, but after turning on the laptop, I can hear a permanent beep.

  So is there a switch or something else, I have to change?

  Welcome them

  Hello

  AFAIK if the laptop beeps it usually means that the motherboard is unable to get access to certain hardware devices. In your case, it could be the CPU.
  It's not easy to say why it happens. Maybe the CPU has a malfunction or you use unsupported CPU or it s something goes wrong during the installation of the CPU.

• Satellite Pro 6000: can't find the right WLAN driver

  Hello
  I have re-installed Windows Xp on my laptop Satellite Pro 6000. Everything works except for the wireless connectivity.
  When we look in the Device Manager, I see that the WLAN driver has not (or wrong) was installed.
  Then looked at the Toshiba site for the drivers, but I am not able to find the right one. I found some drivers, which seems to be the one, but unfortunately after installing the drivers, wireless connectivity is still not available.
  Any help would be appreciated.

  Thanks in advance.
  Best regards, Robert

  Hi Robert

  Stand by! Connectivity is not available or the WLAN card is still not installed correctly in the Device Manager list?

• Satellite Pro 6000 display turns off sometimes

  Hello

  I hope someone can shed some light on a problem with a laptop Toshiba Satellite Pro 6000 that I can't seem to get to the bottom.

  The laptop has Windows XP Professional installed and works fine, except for the fact that intermittently (could be 5 minutes, maybe 90 minutes) the display screen is what I can only describe as 'blocks '.

  The o/s plant (I ran BACK and Tests of diagnosis when the problem occurred) I would say movement of waves of mouse to the screen and activity HARD drive software continues running, except the screen is unreadable with blocks of color scheme.

  Any ideas or suggestions as to what this could be, and how I could go about repairing it?

  Hello

  It's very strange question.
  Have you tried to update the graphics driver? If not then please select this option.

  Besides if the update doesn't fix this eventually it there something wrong with the hardware. In this case, it is not easy to say what could be wrong.
  In your case, I recommend you connect the external monitor if the problem occurs.
  If the color blocks will also appear on the external monitor so eventually the graphics card or motherboard is corrupt.

  But, if the problem occurs only on the internal laptop display, so I would say that there is something wrong with the display or the FL-inverter.
  In this case, you should contact the technicians to solve this problem, because guys have more experience than each common user like me and you.

  Good luck

• Satellite Pro 6000: what is a 3rd Brown cable to WLan?

  I recently bought a second hand toshiba satellite pro 6000. When I bought the wireless adapter is not connected correctly, the black and white wires are connected to the mini pc card, but there is a Brown wire with the same end of the connector that is loose.
  I don't see where it is supposed to go, and the result is that the quality of the connection is bad at 13%.

  If anyone could tell me where this third cable must be connected to it should enhance my quality link (the signal is excellent at 100%)

  Thank you.

  Hello

  The 3rd cable does not for me but maybe it's for BT. as far as I know that you need to connect only 2 cables to the Board of Directors to use the Wlan. The performance has nothing to do how many cables are connected.
  The white cable usually goes to the hand and the black to the auxiliary voltage

• How to get Wlan working on the Satellite Pro 6000 Win2000 Sp4

  Hello
  It is possible to get the wlan is working on a Toshiba Satellite 6000 under Windows 2000 Sp4?
  There are many indications in other Threads, but nothing has worked.
  Does anyone have a step by step instruction?

  Thanks for the help,
  Nico

  Very important to know if your Satellite Pro 6000 laptop was equipped with WLan car or not!

  If the wireless network adapter is available please check if the right WLan driver has been installed and if the wireless network adapter has been properly recognized!

  I searched a little one found that the wireless network cards optional to this series of laptop; This means that some 6000 Pro will be delivered with the Wlan card and some books don't have this module!

• Unable to connect to the wireless network, error message "Windows could not finish repairing the problem because it is impossible to perform the following action. Renewal of your IP address.

  Original title: Unable to connect to the wireless network

  Unable to connect to the network wireless Toshiba Satellite A105 PC running Windows 7.  "Windows could not finish repairing the problem because it is impossible to perform the following action. Renewal of your IP address.  Works with Windows XP SP2, IE 8.00.6001.18702 file, I think that Version 3.  It has been installed on a disk provided by Microsoft after that old installation became corrupt (in the sense of Microsoft technical support.)  Before that, wireless network worked well.   (So unable to connect to the Internet for updates.)   Have tried to change the other settings and different messages acquired when it SHOWS that I am connected but cannot connect because of something to do with the certificate.  I don't remember what I did to try to solve this problem in the last days.

  I should add that I have tried the solutions of the previous forum on this topic, and none worked.

  Hi Marilynnla,

  Sorry to hear about the bad experience you encounter. Lets see if the network problem can somehow be archived.

  Read this article and follow the steps. Lets see if it helps in any way.

  How to troubleshoot wireless network connections in Windows XP Service Pack 2 (Works for Windows XP SP3 as well)

• Satellite Pro 6000: video controller - driver compatible vga

  Hello

  I have a Satellite Pro 6000 but I can't watch DVD because they run very slowly.
  That's probably because my video controller is not installed, but I can't find a
  Driver video controller for a 6000 SP. My OS is XP.
  Can someone help me?
  Thank you

  Hello

  You need to install the Trident display driver. You can find it on the European driver Toshiba page in the Archive folder.
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  Choose Archive-> Archive Pro Satellite-> Satellite Pro 60xx-> Satellite Pro 6000-> Win XP

  By the way; You must use a special software like PowerDVD or WinDVD to play and watch DVD movies!

• Satellite Pro 6000 won't start or do something

  Hello

  My satellite pro 6000 stopped working all of a sudden.
  Power led, battery, keyboard LED is on, but nothing happens, tried to remove the battery, cd, hd and put them back, nothing seems bad.
  Also tried the back button back in case but no tip was not all good.
  It just won't start at all.

  Any ideas out there?

  Thank you

  [Edited by: moderation of the Forum]

  Do the job of seem´to LEDs ok, or they do a code flashing for you say that it is something wrong?

• Unable to connect to other wireless networks

  RE: Unable to connect to other wireless networks

  • My computer is a HP Pavilion dv7 1232nr Entertainment Center
  • My OS is Windows Vista 64 bit
  • I have installed many things over the past year, but know that at some point, I was able to get on free Wi - Fi in hotels

  I am able to connect to my network, but when I try to connect to others, I'm unable to do. I have their password and my computer SHOWS I have a connection, but actually I'm not. When I try to connect to the Internet, the server is not found. I called the support/supplier for the last network owner and he told me that even if I "thought" I was online, I really wasn't. He said that it is probably a router configuration for that person that does not correspond to my computer. As I was just visiting, of course I didn't mess with their router. This happened to me twice, with once the provider is the same as mine, but the only way I could get connected with a hard link.

  So far, the only thing I did is to see if I could connect to free wireless (municipal library) and was unsuccessful. I think the problem is with my settings, but am not sure. I have to be careful to change anything because I can't afford to lose my connection at home because my job depends on it.

  Any suggestions?

  Thanks for any advice you might be able to share.

  Hi, Pat:

  I am very confident that if you download and install the driver from the link below, your problem will be solved.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & CC = US & prodTypeId = 321957 & prodSeriesId = 3688868 & swItem = ob-99392-1 & mode = 3

  Paul

• Damaged BIOS 1 - Satellite Pro 6000 block

  Hi all

  I bought a laptop, a Satellite Pro 6000, but after a few weeks, he refused to start and gave me the bios message 1 damaged block.

  I downloaded the update to bios on the toshiba site, but it does not work.
  I have an external floppydisc. When I put the .exe to upgrade the bios on a floppy disk and turn on the laptop with the ~ button, I get the message "ready for the update of the bios, place the update disk and press any key when ready."
  I can hear the disk is searched, but nothing happened.

  How do I update the bios or is there something else wrong?
  Any help would be appreciated!

  In my opinion with the BIOS update you can't do anything wrong.
  If you BIOS, update by following the procedure described in the document FAQ Toshiba and the BIOS update can not be done properly, I'm afraid there is a problem with the BIOS chip and it may be defective.

  I can't say for sure, but if the BIOS chip is damaged, then you have a big problem.

• Satellite Pro 6000 - how can I update the BIOS?

  Hi all

  I have the problem that my laptop does not start 9 of 10 times with the message: * block 1 BIOS is damaged, call your service man.

  I want to update BIOS but for the Satellite Pro 6000 I can only find an update the BIOS from Windows. But my laptop does not start! Rarely the machine starts, but when I try to update the BIOS, I get the message that I already have the latest version of the BIOS

  My questions:
  * Is there a BIOS update file that is a BIOS floppy? (for example the Satellite Pro 6100 has 2 BIOS files, 1 Windows and 1 making a floppy disk)
  * Is it possible to update the BIOS with the same version of Windows?

  Or perhaps there is another solution for this problem? Has no need to update my BIOS?

  Thank you.

  Hans

  Hello

  I agree with Luke.
  The rom Bios module seems to be damage.
  Either it must be replaced or flashed again.

  But you won't be able to do that! The update of the Bios on the Toshiba page focuses on winning and you will not be able to update if the windows are not running.

  You last chance is an ASP that could check the BIOS ROM.
  As I said, most high, maybe new reflash module Rom help but cela can be answered simply by an ASP technician who checked this.