Unable to connect through bluetooth device

Similar Questions

• Unable to connect to Bluetooth devices in Windows 7 Home Edition

  * Original title: bluetooth problem

  I I elements recognized by my laptop bluetooth but when I tried to log in to use I can't, (for example when I connected my fone, that a window will open to ask that if I close connection which means when the fone or any other connected device has a laptop distance defined it would not lock phone) (, this window allow you to choose settings for the article now I get nothing, but this window (see attachment))

  WINDOWS 7. HOME EDITION

  Thanks for your time, no matter what help you can give me will be greatly appreciated ty

  THE "ALLOW a device TO CONNECT' NEVER WORKS

  Consider the following text:

  The problems with Bluetooth compatible devices

  also:

  How to troubleshoot Bluetooth detection and connectivity...

• Cannot connect a bluetooth device to my e420s 4401-4ng

  Hello.

  IM unable to connect my headset to my pc.

  the headphones are Plantronics BackBeat 903.

  I have no problem to connect to other computers or cell phones, also.

  When you install the Bluetooth driver, it says that it cannot find any bluetooth device, even if the helmet they run on the search for a device (or whatever it's called), but the laptop sees them not at all.

  still, I don't have this problem with other computers.

  In addition, Ive tried to install the latest bluetooth driver available on the lenovo site, but I can't finish it (have to cancel, it is not finish it without locating the device).

  any suggestions?

  Thank you!

  Try pressing Fn + F9. The Bluetooth radio appears in the list?

• Unable to connect through Blazer... help!

  Treo new user here...

  I have a Treo 650 and can't get the blazer or receive new e-mail messages.  When I click on 'Web', it tries to connect but I evenutally get a message stating "error: unplug the data in network Prefs and switch Off of a connection in the Bluetooth Manager and try again." (0x740F).  First... I don't have a bluetooth connection and Bluetooth turned off.  I looked around Pref in the network section and couldn't find something that looks like this.  The message I get seems simple enough, but I'm missing something.  Help!

  Also... The person who had the treo in front of me had an email through ozemail.  Every time an email is delivered to the address of ozemail previous users, I get a message advising me of a new email.  I never heard of this accommodation of emails or have ever had an email via ozemail account.  I bought the treo via an ebay store, so I don't know the previous user.  It does not have an e-mail address when the text goes by, so I have no idea how to do to stop these notifications.  Any idea?

  Hello..  Yes, the hard reset will erase all data on the phone.  When finished it will be like a new device you just took out of the box.  This is why you want to backup by synchronizing first.  Now here is the problem.  When you resynchronize, you want to first go to the computer at C:\program files\palm (or palmone)------your hotsync user name\backup and rename the backup to an old backup folder.  In this way it does not return the problem to the device.  If you use palm desktop 6.22 the path is my documents/palm os software/user/backup of the files. It is possible that you have changed a setting in prefs and there is a place for a user name and the passwork to connect to your network provider.  For these parameters, you would need to talk to them, but if you hard reset and then turn on the cellular radio should automatically pick up that you talk to a tower.

  Message relates to: Centro (Sprint)

• Unable to connect Microsoft Bluetooth Mobile Keyboard 6000 to my PC laptop Toshiba M65-S8092

  I could not connect Microsoft Bluetooth Mobile Keyboard 6000 to my M65-S8092 PC Toshiba laptop.  The labtop does not recognize the keyboard or numeric keypad.  When the keyboard or pad is turned on initially a light solid green lights and the light flashes red and green.

  Hello

  1. are you able to connect other devices via Bluetooth from your computer?

  2. don't you make changes to the computer until the problem occurred?

  3. it connects to another Windows XP computer?

  Method 1: Try running the Fixit tool from the link below.

  Hardware devices do not work or are not detected in Windows:
  http://support.Microsoft.com/GP/hardware_device_problems

  Method 2: Troubleshooting Wireless and Bluetooth problems.  http://www.Microsoft.com/hardware/en-us/help/support/troubleshooting/keyboard/wireless-Bluetooth

  Method 3: If it's Windows XP Service Pack 2 then I suggest you to see link below and check if it helps.

  How to troubleshoot Bluetooth detection and connectivity problems in Windows XP Service Pack 2: http://support.microsoft.com/kb/883258

  For your reference: http://support.Microsoft.com/kb/952818

  Hope this information is useful.

• Unable to connect through SKYPE contacts

  Unable to connect to contacts through SKYPE

  Hello Samhrutha G,.

  Click on the link here on Skype on importing your contacts to use on Skype.

  If you have any more specific questions on Skype, please post in the Skype forum. Clickhere for a link to the Skype forum.

  I hope this helps.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• I can't connect to Bluetooth devices in Windows 7 while the same devices work in Windows 8

  I can connet head set.i bluedio bluetooth and listen to music in windows 8, but I can't do with my windows 7.i says driver is not installed.eventhough I scan of pc.no.drivers have been found... How to fix this problem... I need music listening through my pc headset.from bt... helpme with her

  
  Original title: driver bluetooth

  Hi Houde,

  1. What is the full error message/code?

  2. What is the brand and model of computer headset?

  3. are you able to hear the sound of the internal and external speakers?

  4. What if the device appears in Device Manager?

  Here are some ways you can follow to resolve the problem:

  Method 1:

  Follow the steps in the article:

  Add a Bluetooth device to your computer

  http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-enabled-device-to-your-computer

  Method 2:

  Check out the link and follow the steps in the article:

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/no-sound-help#no-sound=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Also check out the links for more information:

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  What to do when a device is not installed correctly

  http://Windows.Microsoft.com/en-us/Windows7/what-to-do-when-a-device-isn ' t-installed-correctly

  Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.

• Problem with connection of bluetooth devices.

  I just bought a Bluetooth speaker. I plugged and this combined with Bluetooth.in Bluetooth it shows as connected but not on the list of devices.

  This says disconnected and nothing plays the computer to the speaker. If I click on connect the blue icon for Bluetooth continues to go round and round.

  The device is correct because I connected and he played successfully in my Samsung Galaxy S5 partners. I uninstalled and re installed several times.

  On the program of features, it is said not connected, it does also no signal. Can anyone help.

  Hello

  Check with the manufacturer of support speakers and your computer machine and ask for their
  Forums about known problems (if any). They should also provide methods of connection.

  Try this:

  Disable the Bluetooth device.

  On computer Charms Bar-> the settings-> settings change PC-> devices

  HOLD the Power button on the device for 8 + seconds until the BLUE light flashes.

  Device is entered mode pairing - on computer, click on "Search for Devices".

  Install or update drivers if necessary if Windows 8/8.1 will have plenty.

  If paired-> Panel-> Sound - reading devices - set as default if you wish.

  ============================================

  Some troubleshooting methods:

  Read these:

  Why isn't Windows find my Bluetooth or other wireless devices
  http://Windows.Microsoft.com/en-AU/Windows-8/why-isn ' t-windows-conclusion-device
  Device advice
  http://www.Bluetooth.com/pages/device-advice.aspx

  Microsoft - hardware and drivers
  http://Windows.Microsoft.com/en-us/Windows/hardware-drivers-help#hardware-drivers-help=Windows-8

  Why Windows is not find my device?
  http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

  What happens if a device is not installed correctly
  http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly

  BluetoothView is a small utility that runs in the background and monitor the activity of
  Bluetooth devices around you. For each detected Bluetooth device, it displays the following
  information: device name, address, Major Device Type Bluetooth Type device minor, first
  Detection time, last detection time and more. BluetoothView can also inform you when a
  new Bluetooth device is detected, by displaying a balloon in your bar tasks or playing a
  a quiet sound signal. -FREE
  http://www.NirSoft.NET/utils/bluetooth_viewer.html

  BluetoothCL is a small console application that transforms all current detected bluetooth devices
  to the standard output. For each Bluetooth device, the following information is displayed:
  Address MAC, Minor Device Type, Device Type Major and possibly society
  name of the device (if the external file of MAC addresses - oui.txt is provided) - FREE
  http://www.NirSoft.NET/utils/bluetoothcl.html

  BluetoothLogView is a small utility that monitors the activity of Bluetooth devices
  you and displays a log of the devices in the main window. Whenever a new
  Peripheral Bluetooth comes in your area and when the appliance leaves your area, a new line of log
  is added the following information: device name, device address, time of the event, event
  Type ("Device arrival" or "Equipment Left"), Type of aircraft and the company that created the device.
  BluetoothLogView also allows you to specify a description for each device (according to her)
  MAC address) that appears in the column "Description". -FREE
  http://www.NirSoft.NET/utils/bluetooth_log_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Unable to connect through a dsl modem E1550

  I'm new here and don't know how to look pls if accept my apologies if this has been discussed already. Have an existing befsr41 / westell b90-210015 connection that has been worked for years... replaced the befsr41 with e1550 and unable to connect to the internet. Tried to connect to the modem directly to see how to "bridge mode" but can't find the right ip address.

  Any advice will be appreciated.

  Please do not consider my ad - found a solution (clone the mac address of the original router).

• BlackBerry Smartphones has tried to update the device software, now unable to connect to the device via USB

  I tried to update my 8100 to the 4.5 software.  I first updated the desktop to 4.7 software, then tried to update the device, but the process has failed.

  Now, when I open the Desktop Manager it shows not connected to the device.  I can go to the properties of the device mamager and select the balckberry, but when I return to the destop eat it says no device.

  It seems that whatever I do, it does not recognize the usb device.

  The display on the 8100 is company information only text, no graphics or by phone, and it is virtually unusable.

  There are options on the screen for some applications, but if I choose them, it says app not found.

  Is there a way to force an update to it?  Or I poohed this phone?

  Thanks in advance

  Edit:

  I pulled the battery on the device it reboot and tried to return to a former Office Manager Update

  1. unplug BB from USB and PC. Restart the PC turned off completely.

  2. for BB, you'll charge back to the theme that was used on the device when you upgraded, which will normally give you a black and white screen. You must follow the instructions below.

  You will need to use JL_Cmder to wipe the device and then load the operating system on the device. Follow the instructions here:

  http://www.BlackBerryFAQ.com/index.php/How_do_I_wipe_the_BlackBerry_using_Jl_Cmder%3F

  If JL_Cmder does not work, follow this instruction:
  http://www.BlackBerryFAQ.com/index.php/What_to_do_next_if_Jl_Cmder_will_not_connect_and_wipe

• Old iPad 2 Air would connect to Bluetooth devices, but new there is no

  its boring so help me please, the old iPad was destroyed because it did not is nothing to do with the old

  Try the following steps in order to stop if someone works for you

  1. Control Center - tap bluetooth and turn it on again - 8 - 10 times
  2. Force restart the iPhone - after stopping applications using the app Chooser - invoked by fast double pressing the home button and drag upwards on each app until it disappears from the screen. Meet the sleep/wake and home buttons down until you see the logo  - then release and allow normal start upward
  3. Update to the latest iOS if not done
  4. Settings - general - reset - settings Reset network will need to re enter the WiFi passwords
  5. If the pencil of Apple is connected - "Forget it" and try again
  6. Backup the device to iTunes - restore as NEW (no) - see if solves problem - if yes - restore backup
  7. An appointment of 'Genius' to an Apple Store, or select another authorized service provider.

• The main user unable to connect to local devices, work of guest user

  I have problems that I believe are related to my local network communications, but they seem to occur only when you use my main user account.  When I go to my 'guest' account or another account with administrator privileges - the problems do not appear.    Here are the symptoms:

  -My laptop connects successfully to the internet via a gateway generated by my Apple Time Capsule.  This also works if I connect via an Ethernet cable connected via the time Capsule even (Apple 3 to Time Capsule).

  -My main user account will not connect to my printer (error: "printer not responding").

  -My main user account does not connect to my Apple Time Capsule for Time Machine backups, etc. (error: "no available backup drive - try to save again when Time Capsule 3 to is available").

  However my guest account and a newly created user account (Administrator rights) to connect to the printer and Time Capsule without problems.

  This connectivity of the single user account problem seems to persist if I use Wifi or connect to the Capsule of time directly via an Ethernet cable.  I am baffled by this problem.  I recently reset the printer system, restarted my router, checked the driver print and then through the process of restoring my laptop to a month using Time Machine backup copy (interesting that which helps the OSX restore the functionality of the laptop was able to see the Capsule of time...).  After this restoration, everything worked for about a day.  Then the problems of connectivity (only on my main user account) once again failed.

  I'm no one exert by definition, but I've been a Mac user for many years, so I'm not so much a new user.  I wonder if my network card has problems.

  I would like suggestions for measures to take.  Thank you!

  Please read this message before doing anything.

  This procedure is a diagnostic test. It is unlikely to solve your problem. Don't be disappointed when you find that nothing has changed after you complete it.

  The test is intended to determine if the problem is caused by a third-party software that loads automatically at startup or logon, by a device, by a police conflict or corruption of system files or some system caches.

  Disconnect all devices wired except those required to test and remove all the expansion cards from secondary market, as appropriate. Start in safe mode and log on to the account of the problem.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for additional instructions.

  Safe mode is much slower to boot and run as normal, with limited graphics performance, and some things work at all, including an audio output and a Wi - Fi connection on some models. The next normal boot can also be a bit slow.

  The login screen is displayed even if you usually connect automatically. You need your password to log on. If you have forgotten the password, you will have to reset it before you begin.

  Test in safe mode. Same problem?

  After testing, restart as usual (not in safe mode) and make sure you always have the problem. View the results of the test.

• Unable to connect to the device RS-232 USB to the Windows XP client adapter

  My configuration:

  VM Player version 6.0.7 build-2844087

  Windows 7 64 bit host

  Comments Windows XP 32-bit

  USB Serial Port of MOXA cover 1110

  Latest drivers installed for MOXA to the host and guest

  VMware settings for USB controller is: USB USB 2.0 compatibility

  Drive shows the MOXA cover 1110 removable device, non-connected status. When you try to "Connect (disconnect from the host)" gives the error message: "the connection of the USB MOXA cover 1110 device failed. Driver error".»

  Can give you some ideas what to do please?

  Solved. The reason: USB 3.0 controller is not connected, but through a port USB port 2.0 controller works.

• ESXi 6 - unable to connect the USB device to VM

  Hi people:

  I have a problem with a specific USB 3 device to try to connect to a virtual computer.  The device is a Toshiba USB 3 5 TB hard drive, and it is recognized by ESXi I see when I do a lsusb command, but it is never offered as a choice available to connect to a virtual computer.  I tried to restart management agents, restart ESXi with the connected device so that it is immediately detected at startup.  I tried using the web client to vcenter server appliance and the native client C.  She just never appears as a choice just as if it is not there.  Other USB 3 devices, including a Startech gigabit network device and another 2 TB Toshiba USB drive appear as a choice, so it doesn't seem to be a problem with USB 3 devices as a whole.  I have connected to other computers and even an Arch Linux VM under the same ESXi which has a Startech USB 3 connected via PCI Passthrough controller and it works in all places.  I tried to connect to a USB 2 port just for the heck of it, and I got the same result (invisible to virtual machines) here is what information I have via the newspapers.  I see a few entries on the device being suspended in the vmkernel journal, but I don't know if it is normal for a device until it is assigned to a virtual computer.

  Any ideas what is wrong or how to fix welcome.

  lsusb

  lsusb [root@naplesesxi:/var/log] Bus 004 Device 011: ID 0480:d011 Toshiba America information. Systems, Inc.. Bus device 004 008: ID 0 b 95:1790 6 Electronics Corp. AX88179 Gigabit Ethernet Bus device 003 003: ID 2109:2811 Bus 004 Device 007: ID 2109:8110 Bus 002 Device 012: ID 1058:1003 Western Digital Technologies, Inc. Elements 1000 GB Bus 007 Device 002: ID 059b: 0277 Iomega Corp. Bus 004 Device 002: ID 0764:0501 Cyber Power System, Inc. CP1500 AVR UPS Bus 002 Device 003: Hub 4 ports ID Genesys Logic, Inc. 05e3:0610. Bus 004 Device 002: ID 0781:5583 SanDisk Corp. Bus 002 Device 002: ID 8087:0024 Intel Corp. integrated rate matching hub Bus 001 Device 002: ID 8087:0024 Intel Corp. integrated rate matching hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub [root@naplesesxi:/var/log]

  lsusb detail

  [root@naplesesxi:/var/log] lsusb - v d 0480:d011 Bus 004 Device 011: ID 0480:d011 Toshiba America information. Systems, Inc.. Device descriptor: bLength 18 bDescriptorType 1 bcdUSB 3.00 bDeviceClass 0 (defined at the Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 9 idVendor 0 x 0480 Toshiba America information. Systems, Inc.. idProduct 0xd011 bcdDevice 6.07 iManufacturer 1 TOSHIBA

  iProduct 2 external USB 3.0

  iSerial 3 20140426016164

  bNumConfigurations 1

  Configuration descriptor:

  bLength 9

  bDescriptorType 2

  wTotalLength 44

  bNumInterfaces 1

  bConfigurationValue 1

  iConfiguration 0

  bmAttributes 0xc0

  Self-powered

  MaxPower 2mA

  The interface descriptor:

  bLength 9

  bDescriptorType 4

  bInterfaceNumber 0

  bAlternateSetting 0

  bNumEndpoints 2

  bInterfaceClass 8 Mass Storage

  bInterfaceSubClass 6 SCSI

  80 bulk bInterfaceProtocol only

  iInterface 0

  Endpoint descriptor:

  bLength 7

  bDescriptorType 5

  bEndpointAddress 0 x 81 EP 1 IN

  bmAttributes 2

  Transfer in bulk of Type

  Synch type none

  Usage Type data

  wMaxPacketSize 0 x 0400 1 1024 bytes

  bInterval 0

  bMaxBurst 14

  Endpoint descriptor:

  bLength 7

  bDescriptorType 5

  bEndpointAddress 0 x 02 EP 2 OUT

  bmAttributes 2

  Transfer in bulk of Type

  Synch type none

  Usage Type data

  wMaxPacketSize 0 x 0400 1 1024 bytes

  bInterval 0

  bMaxBurst 14

  Object store binary descriptor:

  bLength 5

  bDescriptorType 15

  wTotalLength 42

  bNumDeviceCaps 3

  Functionality of the USB 2.0 Extension device:

  bLength 7

  bDescriptorType 16

  bDevCapabilityType 2

  bmAttributes 0x00000002

  Link Power Management (LPM) taken in charge

  Feature of the superSpeed USB device:

  bLength 10

  bDescriptorType 16

  bDevCapabilityType 3

  bmAttributes 0x00

  wSpeedsSupported 0x000e

  Device can operate at full speed (12Mbps)

  Device can operate at high speed (480 Mbps)

  Device can operate at SuperSpeed (5Gbps)

  bFunctionalitySupport 1

  Fully functional low peripheral speed is Full Speed (12 Mbps)

  bU1DevExitLat 10 micro seconds

  bU2DevExitLat 2047 micro seconds

  Functionality of the device ID container:

  bLength 20

  bDescriptorType 16

  bDevCapabilityType 4

  Want 0

  ContainerID {14c4c0cc-6785-495d-8dcb-c74305d84121}

  Device status: 0x0001

  Self-powered

  [root@naplesesxi:/var/log]

  VMkernel when pluggin installed in drive

  2016-03 - T 02, 20: 04:23.337Z cpu5:33148) < 6 > usb 4-4: new USB drive found, idVendor = 0480, idProduct = d011 2016-03 - T 02, 20: 04:23.337Z cpu5:33148) < 6 > usb 4-4: new USB device strings: Mfr = 1, product = 2, SerialNumber = 3 2016-03 - T 02, 20: 04:23.337Z cpu5:33148) < 6 > usb 4-4: product: external USB 3.0 2016-03 - T 02, 20: 04:23.337Z cpu5:33148) < 6 > usb 4-4: manufacturer: TOSHIBA 2016-03 - T 02, 20: 04:23.337Z cpu5:33148) < 6 > usb 4-4: serial number: 20140426016164 2016-03 - T 02, 20: 04:23.337Z cpu5:33148) < 6 > xhci_hcd 0000:00:14.0: Add ep 0x81, slot 12, new flags drop id = 0 x 0, add new flags = 0x8 2016-03 - T 02, 20: 04:23.337Z cpu5:33148) < 6 > xhci_hcd 0000:00:14.0: Add ep 0 x 2, location 12, new flags drop id = 0 x 0, add new flags = 0 x 18 2016-03 - T 02, 20: 04:23.337Z cpu5:33148) < 6 > xhci_hcd 0000:00:14.0: xhci_check_bandwidth called for udev 0x4302ab3e2bc0 2016-03 - T 02, 20: 04:23.337Z cpu5:33148) < 6 > xhci_hcd 0000:00:14.0: new context of input control: 2016-03 - T 02, 20: 04:23.337Z cpu5:33148) < 6 > xhci_hcd 0000:00:14.0: exit after config context successful ep cmd: 2016-03 - T 02, 20: 04:23.337Z cpu5:33148) < 6 > usb 4-4: name of the vendor: 0 x 0480, product: 0xd011, revision: 0 x 0607 2016-03 - T 02, 20: 04:23.337Z cpu5:33148) < 6 > usb 4-4: Interface subclass: 0x06, Protocol: 0 x 50 2016-03 - T 02, 20: 04:23.337Z cpu5:33148) WARNING: LinScsiLLD: scsi_add_host:573: sgMaxEntries vmkAdapter (usb-storage) rounded up to 255. Indicated size was 65535 2016-03 - T 02, 20: 04:23.337Z cpu5:33148) LinPCI: LinuxPCI_DeviceIsPAECapable:581: device capable of EAP at 0000:00:14.0

  2016-03 - T 02, 20: 04:23.337Z cpu5:33148) DMA: 646: DMA 'vmhba50' engine, created using the Mapper "DMANull."

  2016-03 - T 02, 20: 04:23.337Z cpu5:33148) < 6 > usb-storage 4 - 4:1.0: interface is claimed by usb-storage

  2016-03 - T 02, 20: 04:23.337Z cpu5:33148) < 6 > usb 4-4: device is not available for passthrough

  2016-03 - T 02, 20: 04:23.337Z cpu5:33148) < 6 > usb 4-4: usbfs: registered usb040b

  2016-03 - T 02, 20: 04:23.337Z cpu5:33148) < 6 > hub 4 - 0:1.0: suspended

  2016-03 - T 02, 20: 04:23.349Z cpu0:32819) ScsiNpiv: 1505: GetInfo for adapter vmhba50, [0x4301a7966240], max_vports = 0, vports_inuse = 0, linktype = 0, status = 0, failreason = 0, m = bad0020

  2016-03 - T 02, 20: 04:23.493Z cpu5:33105) < 6 > xhci_hcd 0000:00:14.0: xhci_hub_status_data: port polling station.

  2016-03 - T 02, 20: 04:25.340Z cpu5:33111) < 6 > usb3 usb: suspended

  2016-03 - T 02, 20: 04:25.340Z cpu5:33111) < 6 > usb3 usb: suspended

  2016-03 - T 02, 20: 04:34.056Z cpu6:33107) < 6 > usb-storage 4 - 4:1.0: suspended

  2016-03 - T 02, 20: 05:15.869Z cpu4:162661) < 6 usb transfer > disabled

  2016-03 - T 02, 20: 05:16.059Z cpu2:162686) VC: 3551: device rescan time 9 msec (total number of 5 devices)

  2016-03 - T 02, 20: 05:16.059Z cpu2:162686) VC: 3554: Filesystem probe time 13 msec (devices surveyed 3 out of 5)

  2016-03 - T 02, 20: 05:16.059Z cpu2:162686) VC: 3556: refresh the time open volume 1 msec

  2016-03 - T 02, 20: 05:16.150Z cpu1:162688) < 6 > usb transfer enabled; all eligible devices will be claimed by the kernel drivers

  2016-03 - T 02, 20: 05:16.235Z cpu6:162690) VC: 3551: device rescan time 8 msec (total number of 5 devices)

  2016-03 - T 02, 20: 05:16.235Z cpu6:162690) VC: 3554: Filesystem probe time 11 msec (devices surveyed 3 out of 5)

  2016-03 - T 02, 20: 05:16.235Z cpu6:162690) VC: 3556: refresh the time open volume 1 msec

  2016-03 - T 02, 20: 05:16.292Z cpu2:162691) ScsiScan: 836: vmhba0:C0:T0:L0 Path supports the REPORT LUN 0 x 11

  2016-03 - T 02, 20: 05:27.898Z cpu3:162776) CMMDS: CMMDSVSIUpdateNetworkCbk:2150: RECONFIGURE interface vmk3 with cmmds (success).

  2016-03 - T 02, 20: 05:27.921Z cpu3:162776) VC: 3551: device rescan time 9 msec (total number of 5 devices)

  2016-03 - T 02, 20: 05:27.921Z cpu3:162776) VC: 3554: Filesystem probe time 13 msec (devices surveyed 3 out of 5)

  2016-03 - T 02, 20: 05:27.921Z cpu3:162776) VC: 3556: refresh the time open volume 1 msec

  2016-03 - T 02, 20: 05:28.512Z cpu4:162776) Config: 680: "SIOControlFlag2" = 0, the old value: 0, (State: 0x0)

  2016-03 - T 02, 20: 05:32.679Z cpu0:162776) Config: 680: "VMOverheadGrowthLimit" = 4294967295, old value: 4294967295, (State: 0x0)

  2016-03 - T 02, 20: 05:34.612Z cpu6:162983) FixedMem TPM: start = 0xfed40000, end = 0xfed44fff, 0 = write protection

  2016-03 - T 02, 20: 05:46.397Z cpu7:162998 = 73 a 64522 opID) World: 15514: VC opID HB-SpecSync-host-9@0-3fda4c20-7-209f maps to vmkernel opID 73 a 64522

  2016-03 - T 02, 20: 05:46.397Z cpu7:162998 = 73 a 64522 opID) Config: 680: "HostLocalSwapDirEnabled" = 0, the old value: 0, (State: 0x0)

  2016-03 - T 02, 20: 06:00.897Z cpu3:162786 opID = 478d4c8) World: 15514: VC opID HB-SpecSync-host-9@0-799bbb99-81-212f maps to vmkernel opID 478d4c8

  2016-03 - T 02, 20: 06:00.897Z cpu3:162786 opID = 478d4c8) Config: 680: "HostLocalSwapDirEnabled" = 0, the old value: 0, (State: 0x0)

  Hi guys, I just had the same issue and it resolved on my test environment.

  I got the device ID using "lsusb".

  Bus 004 Device 002: ID 0480:d011 Toshiba America information. Systems, Inc..

  where 0480:d011 is the device ID

  Then ran the following command:

  oddities s esxcfg-module = 0480:d011:i usb-storage

  After a reboot I was able to cross the device for my VMs.

  I'm not an expert in this field, as far as I can understand of this thread: problem mit USB Passthrough (eine andere nicht, geht HDD) - to vSphere5 / ESXi 5.0 5.1 - VMware Forum und "usb-storage" module crashes when you try to access the drive and does not pass through to the arbitrator of the usb. The person in this thread turns off the usb storage but I boot from USB and so I couldn't do it. Steal the idea of this thread: zero calorie tech deals: VMFS formatted USB sticks in VMware vSphere 5.1 I could exclude the USB from the usb-storage module device (I think).

  I have not tested how this affects other features, but initial test is positive.

• Unable to connect through wireless F4580: "unable to retrieve the IP.

  Hello

  I live in France, where the F4580 and trying to connect wireless.  The printer works fine when connected via USB, but I can't make it work wireless, HP installation wizard gives me:

  IP address: impossible to retrieve the IP

  Subnet mask: Impossible to retrieve the IP

  Default gateway: failed to retrieve the IP

  Preferred DNS server: unable to retrieve the IP

  Auxiliary DNS server: unable to retrieve the IP

  I use a MacBook Pro with Snow Leopard on an ISP Internet Orange Livebox. I saw some issues autour, but none exactly what I have with the same configuration.

  Filtering of Mac addresses: a possibility, but other laptops are able to connect to this wireless with key security without problem. similar here: http://h30434.www3.hp.com/t5/Printer-networking-and-wireless/Wireless-set-up-HP-F4580-vs-Orange-Live... but also seems to be PC

  Orange Livebox problem: question mentioned here: http://livebox.tomhallam.co.uk/tutorials/how-to-install-a-printer-to-your-livebox-liveprinter.html but that seems to be for a PC

  Question in Snow Leopard: is not compatible software for SL? I see this: http://h30434.www3.hp.com/t5/Printer-networking-and-wireless/C4780-Snow-Leopard-Airport/m-p/174198/h... but that's a different printer model

  Issues related to the:

  How to find the IP address of my printer?

  How to find the MAC address of my printer?

  How can I print my network Config page?

  Of the ideas there?  Any help is very appreciated.

  Many routers-wireless Orange Livebox require that press you a button to add a new device to the network.  The button is probably located at the back of the router.

  I think we should start over.  Try the installation process of the printer F4580 using the driver from www.hp.com located here.  Once it scans and detects the printer, press the Connect button on the back of the Livebox wireless router.