Unable to connect to 11.1.2.4.0 using OBIEE 11.1.1.7.0 Admintool HFM

Similar Questions

• I get "unable to connect to web services" when trying to use them.

  I bought a HP Envy 114.  I've connected to the network and can not print from multiple computers without problem.  When you attempt to connect and allow web services he asks me to accept the terms, then 'check' of product updates.  He always comes up saying "unable to connect to web services.  Confirm access to the internet, and then try again. ».  I set up the wireless and it diesplays the network name and IP address.  I don't know what else to try at this point.  After that, there is no help, I just keep getting sent in circles.

  It took a couple times but it seems to work perfectly.  Thanks for your help.

• BlackBerry App BBM error - unable to connect, you need a data plan to use BBM. For more details, please contact your service provider.

  Hi guys,.

  Suddenly, my BBM became crazy and unable to connect with the above mentioned error message (title). I did some digging around solutions and tried the hard reset. Nothing works.

  I am still able to connect to internet via mobile internet and wifi. So I don't know if it's a problem of operator or the BBM Server glitch thing.

  Help, please.

  Thank you.

  John

  Dear all,

  Just got my BBM works, BlackBerry seems to get working again.

  Kind regards

  John Ho

• Unable to connect to the remote Mitsubishi OPC server using datasocket

  I can read OPC items locally using datasocket, however if the customer is in another PC I get error 1184 when I try to connect to an element. The datasocket select URL works well.

  Both computers are Windows 7 machines in the same workgroup sharing the same username/password.

  I am able to read items through the DSC OPC client (but I don't want to use DSC). This seems to indicate that the DCOM security settings are good.

  I know there is a lot of documentation on remote access OPC and DCOM and I read most of the documentation by OR and other sources, nothing helps. None of the docs are to mention this specific error code. Any suggestions?

  Well, this is typical... After two days of efforts, just 40 minutes after you posted my question I found the solution in another thread of this forum.

  The remote registry service must be running on the server.

  Now I only need to rewind some of the many settings that I did it carefully, to find the minimum working conditions.

• Unable to connect to the internet through the router using Linksys N - USB

  network connection

  I have a Linksys G wireless router on my computer and a wireless adapter Linksys N - USB on my wife's computer. Wondering why she can't get on the internet via my router? Thank you

  Thanks for the response, took the computer to the PC Nerddss and they had all connected it in a few minutes. All right

• Unable to connect to my server through my laptop using the selections of my network places.

  I can't connect to my desktop (server) via my laptop using the selection of my network places, even if the shared my cell phone directories are available from the desktop (server). Any ideas on how I can fix this?

  I recently installed McAfee Total Protection on my laptop.

  Unlike the Windows Firewall, many third-party firewalls (such as McAfee) manage outbound as well as inbound traffic.  Make sure that the firewall is configured to recognize your LAN as a "trusted network".

  I can't tell you exactly how to do this because McAfee is not user guides for its most recent products available - you can use the built-in help of the product for the guidance system.

• HP pavilion model dv9910us: unable to connect to the internet with hp laptop using xfinity router/modem

  Hello

  I have a hp pavilion computer model with windows vista premium OS hom dv9910us.  I have a wireless modem/router xfinity gateway device.  I got it somewhere else and it worked using verizon with a router and a separate modem.  I also tried a location xfinity with a router and a separate modem and it worked.  I had a separate wireless adapter and installed and disabled the atheros ar5007 adapter in Device Manager.  This 2011 atheros adapter will work with this model computer using the operating system windows vista Home premium.  If so, could I leave the disabled ar5007 and install the 2011 to make sure it's ok before you uninstall the ar5007.  I'm really a novice and stumbling just my way through it.  Any help is appreciated.

  Hello:

  You must enable the atheros wireless card and install this driver.  It has no effect on the other you use.

  http://h20564.www2.HP.com/hpsc/SWD/public/Detail?sp4ts.OID=5060881&swItemId=ob_108905_1&swEnvOid=4059#.

  Then turn the PC off, remove the usb adapter, reboot and see if you can connect via the atheros card.

• Unable to connect to the wireless network; Request to use the function keys and the keys on the keyboard

  * Original title: wireless connection problem

  I have an Inspiron computer (laptop).  I can't connect to my wireless Internet.  When troubleshooting it says use the buttons or the function keys on the front or side of the computer to turn on my wi - fi.  How to do that? How can I activate my wireless Internet connection?  Help, please!

  Hello

  Check with Dell support, their books online, the drivers/firmware, diagnostics and ask in their forums known issues.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/

  Dell PC Diagnostics
  http://www.Dell.com/support/Diagnostics/us/en/19/
  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• Unable to connect to update 2 5.5 SSO using administrato@vpshere.local

  Hi I only am not able to connect using [email protected], it still says authenciateion failed, I got the below error. I am using windows 2008R2SP1 to install update 2 SSO 5.5 and also the same OS for active Directory. I don't know where I'm wrong, but need help on this ASAP. Help, please. I don't know the password is correct still see this error, I am able to connect using the local operating system administrator. but it will not show sso user and group, is there a way to give the local operating system using powershell or cmd without vpshere.local sso Admin Priviledge.

  2014-11-05 21:53:10, 226 INFO [DirectoryConfigStore] tenantsRootDn: cn = vsphere.local, cn = ins, cn = IdentityManager, cn is Services, DC = vsphere, DC = local, the name of the property: vmwSTSEntityId, value: [Lcom.vmware.identity.interop.ldap.LdapValue;@57fa1e67

  2014-11-05 21:53:11, 830 tenant default INFORMATION [IdentityManager] [vsphere.local] have been correctly set up

  2014-11-05 21:53:11, the default name of 877 INFO [IdentityManager] determined localos providers such as [WIN2008VC].

  2014-11-05 21:53:12, 391 INFO [IdentityManager] default suppliers have been correctly set up for tenant [vsphere.local]

  2014-11-05 21:53:14, 743 INFO [IdentityManager] Identity Manager initialized successfully

  2014-11-05 21:53:44, 182 INFO [IdentityManager] credentials have been correctly set up for tenant [vsphere.local]

  2014-11-05 21:53:44, 307 INFO [DirectoryConfigStore] tenantsRootDn: cn = vsphere.local, cn = ins, cn = IdentityManager, cn is Services, DC = vsphere, DC = local, the name of the property: vmwSTSClockTolerance, value: [Lcom.vmware.identity.interop.ldap.LdapValue;@321f8d38

  2014-11-05 21:53:44, 323 INFO [IdentityManager] clock tolerance have been correctly set up for tenant [vsphere.local]

  2014-11-05 21:53:44, 432 INFO [DirectoryConfigStore] tenantsRootDn: cn = vsphere.local, cn = ins, cn = IdentityManager, cn is Services, DC = vsphere, DC = local, the name of the property: vmwSTSDelegationCount, value: [Lcom.vmware.identity.interop.ldap.LdapValue;@3570713d

  2014-11-05 21:53:44, 432 County delegation INFO [IdentityManager] have been correctly set up for tenant [vsphere.local]

  2014-11-05 21:53:44, 556 INFO [DirectoryConfigStore] tenantsRootDn: cn = vsphere.local, cn = ins, cn = IdentityManager, cn is Services, DC = vsphere, DC = local, the name of the property: vmwSTSRenewCount, value: [Lcom.vmware.identity.interop.ldap.LdapValue;@691a7733

  2014-11-05 21:53:44, 572 County INFO [IdentityManager] survivor have been correctly set up for tenant [vsphere.local]

  2014-11-05 21:53:44, 681 INFO [DirectoryConfigStore] tenantsRootDn: cn = vsphere.local, cn = ins, cn = IdentityManager, cn is Services, DC = vsphere, DC = local, the name of the property: vmwSTSMaxBearerTokenLifetime, value: [Lcom.vmware.identity.interop.ldap.LdapValue;@4887eb2d

  2014-11-05 21:53:44, 696 life token INFO [IdentityManager] carrying Maximum have been correctly set up for tenant [vsphere.local]

  2014-11-05 21:53:44, 805 INFO [DirectoryConfigStore] tenantsRootDn: cn = vsphere.local, cn = ins, cn = IdentityManager, cn is Services, DC = vsphere, DC = local, the name of the property: vmwSTSMaxHolderOfKeyTokenLifetime, value: [Lcom.vmware.identity.interop.ldap.LdapValue;@406be93e

  2014-11-05 21:53:44, 821 INFO [IdentityManager] Maximum HoK token to life have been correctly set up for tenant [vsphere.local]

  2014-11-05 21:53:46, 254 INFO [IdentityManager] authentication successful for the user [[email protected]] [vsphere.local] tenant in milliseconds [1277]

  2014-11-05 21:57:19, 620 INFO [IdentityManager] authentication successful for the user [[email protected]] [vsphere.local] tenant in milliseconds [210]

  2014-11-05 21:57:29, 186 INFO [IdentityManager] authentication successful for the user [[email protected]] [vsphere.local] tenant in milliseconds [207]

  2014-11-05 21:57:52, 561 INFO [IdentityManager] authentication successful for the user [[email protected]] [vsphere.local] tenant in milliseconds [208]

  2014-11-05 21:58, 584 INFO [IdentityManager] authentication successful for the user [[email protected]] [vsphere.local] tenant in milliseconds [206]

  2014-11-05 21:58:40, 111 INFO [IdentityManager] authentication successful for the user [[email protected]] [vsphere.local] tenant in milliseconds [206]

  2014-11-05 21:58:43, 922 INFO [VMwareDirectoryProvider] principalDn [CN = WebClient_2014.11.05_215631, CN = ServicePrincipals, DC = vsphere, DC = local] is not a member of Group [directors], jump LdapMod Op

  2014-11-05 21:58:50, 012 INFO [IdentityManager] authentication successful for the user [[email protected]] [vsphere.local] tenant in milliseconds [204]

  2014-11-05 22:02:51, ERROR 324 [IdentityManager] could not authenticate main [[email protected]] for tenant [vsphere.local]

  com.vmware.identity.idm.IDMLoginException: access denied

  at com.vmware.identity.idm.server.IdentityManager.authenticate(IdentityManager.java:2409)

  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

  at sun.reflect.NativeMethodAccessorImpl.invoke (unknown Source)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke (unknown Source)

  at java.lang.reflect.Method.invoke (unknown Source)

  at sun.rmi.server.UnicastServerRef.dispatch (unknown Source)

  to sun.rmi.transport.Transport$ 1.run (unknown Source)

  to sun.rmi.transport.Transport$ 1.run (unknown Source)

  at java.security.AccessController.doPrivileged (Native Method)

  at sun.rmi.transport.Transport.serviceCall (unknown Source)

  at sun.rmi.transport.tcp.TCPTransport.handleMessages (unknown Source)

  to sun.rmi.transport.tcp.TCPTransport$ ConnectionHandler.run0 (unknown Source)

  to sun.rmi.transport.tcp.TCPTransport$ ConnectionHandler.run (unknown Source)

  at java.util.concurrent.ThreadPoolExecutor.runWorker (unknown Source)

  to java.util.concurrent.ThreadPoolExecutor$ Worker.run (unknown Source)

  at java.lang.Thread.run (unknown Source)

  "2014-11-05 22:02:51, 330 exception ERROR [ServerUtils] ' com.vmware.identity.idm.IDMLoginException: access denied."

  com.vmware.identity.idm.IDMLoginException: access denied

  at com.vmware.identity.idm.server.IdentityManager.authenticate(IdentityManager.java:2481)

  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

  at sun.reflect.NativeMethodAccessorImpl.invoke (unknown Source)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke (unknown Source)

  at java.lang.reflect.Method.invoke (unknown Source)

  at sun.rmi.server.UnicastServerRef.dispatch (unknown Source)

  to sun.rmi.transport.Transport$ 1.run (unknown Source)

  to sun.rmi.transport.Transport$ 1.run (unknown Source)

  at java.security.AccessController.doPrivileged (Native Method)

  at sun.rmi.transport.Transport.serviceCall (unknown Source)

  at sun.rmi.transport.tcp.TCPTransport.handleMessages (unknown Source)

  to sun.rmi.transport.tcp.TCPTransport$ ConnectionHandler.run0 (unknown Source)

  to sun.rmi.transport.tcp.TCPTransport$ ConnectionHandler.run (unknown Source)

  at java.util.concurrent.ThreadPoolExecutor.runWorker (unknown Source)

  to java.util.concurrent.ThreadPoolExecutor$ Worker.run (unknown Source)

  at java.lang.Thread.run (unknown Source)

  2014-11-05 22:02:51, 375 INFO [IdentityManager] authentication failed for user [[email protected]] [vsphere.local] tenant in milliseconds [56]

  2014-11-05 22:03:06, 766 ERROR [IdentityManager] could not authenticate main [[email protected]] for tenant [vsphere.local]

  com.vmware.identity.idm.IDMLoginException: access denied

  Ah, I put the wrong field. typo in every time I enter the standards body.

• Unable to connect to the network in Windows 7 using the Boot Camp via Fusion 2.0.4 partition

  I know that Windows 7 RC is not officially supported, but I was wondering if anyone had ideas regarding my current situation.  I'm running the RC 32 - bit of a Boot Camp partition, via merger on a unibody MacBook, and whenever I'm in Fusion Windows cannot connect to my network.  Previously, I had a vm file-based and it worked normally, and in Boot Camp, I can get online without problem.  I went to training Camp to see if the Aero effects would work (they did after I ran the test of Windows experience).  I tried mode Bridged and NAT and any Windows does not see my wireless network.

  At the time current Windows 7 in any version is not supported by Apple on the Boot Camp partition, nor is it supported in any way under Fusion.

  Take a look at the configuration of the Virtual Machine's .vmx file and make sure that the NIC is showing that "e1000" as in the following example.

  ethernet0.virtualDEV = "e1000"
  

  To get the location of the Machine configuration file virtual .vmx take a look at the Beginner's Guide has VMware Fusion or gather Information for VMware Fusion.

  Note: You should make the change while Windows is shutdown, not suspended and merger closed.

  You can use TextEdit to edit the .vmx of the target Virtual Machine configuration file and locate the file...

  VMware Fusion (menu bar) > help > VMware Fusion help > navigation in VMware Fusion > using Virtual Machine library window > determine the location of the files from a virtual machine

  VMware Fusion (menu bar) > help > VMware Fusion help > using the Interface of VMware Fusion > work with Virtual Machine packages

• Unable to connect to the Internet or Email

  For some reason, I am unable to connect to the internet or e-mail using a wired connection. Earlier today, I was installing a wireless printer and I got it in collaboration with the wireless network. But now I switched to the cable network and I can not connect. However, the connection to the LAN network is showing that I am connected. To post this message, I had to go back to the wireless network.  I guess I have inadvertently changed a setting somewhere. I know that my firewall is not blocking the connection, because I disabled it previously but the LAN would not even connect. Any ideas?

  Thank you

  Tony

  Well, I found the problem. It's working now. The problem was that the TCP properties have been changed somehow. There was a specific IP address instead to get the IP address automatically is checked.

  Tony

• Error: Unable to connect to the Converter Server

  I'm doing a P2V conversion of base with the converter for .net SDK; However I'm getting unable to connect to the converter server.  I use the SDK software on the converter server.  Any help would be greatly appreciated.

  my properties file is pretty basic:

  physicalsource.address=192.168.1.32
  physicalsource.username=192.168.1.32\rootcd
  physicalsource.password=**********
  physicalsource.ostype=linux
  physicalsource.agentport=9089
  physicalsource.reboot=false
  vcserver.address=192.168.80.2
  vcserver.username=192.168.80.2\administrator
  vcserver.password=**********
  conversion.job.name=P2VConversionJob1
  conversion.job.description=MyNewVMTest
  conversion.vmtocreate.name=MyNewVM
  conversion.vmtocreate.vcpu=1
  conversion.vmtocreate.memory=4096
  converterserver.address=192.168.80.5
  converterserver.username=192.168.80.5\administrator
  converterserver.password=**********
  

  Here are the results.  And I don't know what else I need included.  I disabled all firewall server at the moment as well to make sure that they weren't getting in the way.

  C:\_cd\sdk\samples\DotNet\cs\SubmitWinP2VJob\bin\Debug>ConverterSamples.exe cd.p
  roperties
  Caught Exception :  Name : WebException Message : Unable to connect to the remot
  e server Trace :    at System.Net.HttpWebRequest.GetRequestStream(TransportConte
  xt& context)
     at System.Net.HttpWebRequest.GetRequestStream()
     at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodN
  ame, Object[] parameters)
     at ConverterApi.ConverterService.ConverterRetrieveServiceContent(ManagedObjec
  tReference _this)
     at ConverterSamples.ConverterConnection.Connect(String serverUrl, String user
  name, String password) in c:\_cd\sdk\samples\DotNet\cs\SubmitWinP2VJob\Converter
  Connection.cs:line 51
  ERROR: Failed to Connect to Converter Server.
  
  
  C:\_cd\sdk\samples\DotNet\cs\SubmitWinP2VJob\bin\Debug>
  

  You must be able to connect to the computer you run the samples of the converter (192.168.80.5) on port 443 server machine. You can check the following:

  * Converter Server is running

  * There is no firewall is blocking the port 443

  * There is no other application taking port 443 and not allowing not converter tuned (a web server on the same computer?)

  * Converter server is installed in Client-Server mode (by default, it is installed in local mode only and no TCP connections are allowed, but samples SDK only support TCP mode).

• Unable to connect to app store after iOS iphone 10 6 update

  Hello

  Since the upgrade to IOS 10 my iPhone 6 with stubbornly refuses to connect to the App store. The error message is "unable to connect to the app store, try again."

  The phone is connected to the internet (I can surf and send emails) by wifi. Turn off the wifi and the use of mobile (cellular) only link cause the same error. I also did a reboot hot and cold, without result.

  Any suggestions?

  Thank you

  Bill...

  ANSWER: this theme has the best 3 options. In my case, I had to sign out and in the app store of settings, iTunes and app store. Fixed

  PLE-3598048 http://www.Macworld.co.uk/How-to/iPhone/What-do-If-You-cant-connect-App-Store-AP.

• Just updated to IOS 10.0.2 and unable to connect using Store.Please App!

  Just updated to IOS 10.0.2 and unable to connect using Store.Please App!

  Harry

  Hello

  Go down to itunes apple ID page homepage remove ID, then reconnect again.

  See you soon

  Brian

• Unable to connect on the Messages or FaceTime after upgrading to Sierra

  Good afternoon! After upgrading my MacBook Pro (13-inch, mid 2010) to macOS Sierra (10.12.), I am unable to connect to Messages or FaceTime. They worked fine before the upgrade.

  • Messages: After entering my Apple ID and password, I get the message "Could not sign in iMessage." "Could not sign. Please check your network connection and try again. "or"an error has occurred during authentication. "My network is connected to the network (where this message), and the password is correct. Also, I have generated a password app specific to Messages. Enter just grew the message "your Apple ID or the password is incorrect." Messages is works well with my Google Talk and AIM accounts.
  • FaceTime: After entering my Apple ID and password, the engine just turns and it never connects me. Similarly, I have generated a password app specific but use it just gets the message, "your Apple ID or the password is incorrect."

  No idea how I can regain access to these applications? Thank you!

  Reached out to the Twitter account of Apple Support. He proposed to restart. It worked.