Unable to connect to update 2 5.5 SSO using administrato@vpshere.local

Similar Questions

• I get "unable to connect to web services" when trying to use them.

  I bought a HP Envy 114.  I've connected to the network and can not print from multiple computers without problem.  When you attempt to connect and allow web services he asks me to accept the terms, then 'check' of product updates.  He always comes up saying "unable to connect to web services.  Confirm access to the internet, and then try again. ».  I set up the wireless and it diesplays the network name and IP address.  I don't know what else to try at this point.  After that, there is no help, I just keep getting sent in circles.

  It took a couple times but it seems to work perfectly.  Thanks for your help.

• BlackBerry App BBM error - unable to connect, you need a data plan to use BBM. For more details, please contact your service provider.

  Hi guys,.

  Suddenly, my BBM became crazy and unable to connect with the above mentioned error message (title). I did some digging around solutions and tried the hard reset. Nothing works.

  I am still able to connect to internet via mobile internet and wifi. So I don't know if it's a problem of operator or the BBM Server glitch thing.

  Help, please.

  Thank you.

  John

  Dear all,

  Just got my BBM works, BlackBerry seems to get working again.

  Kind regards

  John Ho

• Unable to connect to 11.1.2.4.0 using OBIEE 11.1.1.7.0 Admintool HFM

  Hello!

  Im trying to import a HFM cube admintool hollow OBIEE but im getting the error below.

  The RPD is generated by the OFMA config_utility and its pool of connections.

  The looks of connection as follows:

  ADM:thin:com. Oracle.HFM.HsvADMDriver:FMCLUSTER:APP2015

  Someone has experienced this problem where ins OBIEE't able to connect to 11.1.2.4.0 using Admintool of OBIEE HFM?

  I have read the post on John's amazing blog, but in this case, he was using OBIEE 11.1.1.9.0 against HFM 11.1.2.4.0

  More of life than that...: HFM 11.1.2.4 as a source of data in OBIEE

  < OBIEEVersion > 11.1.1.7.0

  < HFM_VERSION > 11.1.2.4.0

  [2015 06-18 T 15: 56:18.000 + 02:00] [OracleBIServerComponent] [ERROR: 1] [] [] [ecid:] [tid: 16f0] [nQSError: 77031] error occurs when calling remote ADMImportService service. Details: Details: []

  Unable to connect to the ADM.

  com.hyperion.ap.APException: [0] EPMHFM-69052: preferential kunde inte oppna applications.

  at oracle.adm.session.ADMDriverSession.openApplication(ADMDriverSession.java:3260)

  at oracle.adm.session.ADMDriverSession.connect(ADMDriverSession.java:128)

  at com.oracle.hfm.HsvADMDriver.openConnection(HsvADMDriver.java:95)

  at com.oracle.hfm.HsvADMDriver.HssConnOpenConnection(HsvADMDriver.java:67)

  at com.hyperion.ap.adm.HssConnSessionWrapper.HssConnOpenConnection(HssConnSessionWrapper.java:1483)

  at com.hyperion.ap.adm.HssAdm.openConnection(HssAdm.java:912)

  at com.hyperion.ap.adm.HssAdm.internal_openConnection(HssAdm.java:1799)

  at com.hyperion.ap.adm.HssAdm.openConnection(HssAdm.java:1065)

  at oracle.bi.integration.admimport.service.ADMImportClient.openConnection(ADMImportClient.java:64)

  at oracle.bi.integration.admimport.service.ADMImportService.openConnection(ADMImportService.java:159)

  at oracle.bi.integration.admimport.service.ADMImportService.executeDataSources(ADMImportService.java:146)

  at oracle.bi.integration.admimport.service.ADMImportService.execute(ADMImportService.java:67)

  at oracle.bi.integration.javahost.ServiceRpcCall.processMessageInternal(ServiceRpcCall.java:55)

  at com.siebel.analytics.javahost.AbstractRpcCall.processMessage(AbstractRpcCall.java:251)

  at com.siebel.analytics.javahost.MessageProcessorImpl.processMessage(MessageProcessorImpl.java:193)

  to com.siebel.analytics.javahost.Listener$ Job.run (Listener.java:223)

  at com.siebel.analytics.javahost.standalone.SAJobManagerImpl.threadMain(SAJobManagerImpl.java:207)

  to com.siebel.analytics.javahost.standalone.SAJobManagerImpl$ 1.run(SAJobManagerImpl.java:155)

  at java.lang.Thread.run(Thread.java:662)

  ]]

  Any help is greatly appreciated

  Thanks in advance!

  Lamin

  Hi John!

  The problem is solved!

  The culprit was a path reference in opmn.xml which was not properly get picked up.

  Thanks for your time and your ideas!

  Cordially Lamin

• Unable to connect after update of the preflight IOS app

  Since the last update of the application of DPS preflight on iOS, I am unable to login to see the projects. I am able to connect to the DPS dashboard with the same username/password.

  What should do?

  Thank you

  Ulrich haha

  The app apple approved is not oriented to our production department. The dev team is aware and is working to solve this problem and get a new construction submitted to Apple for review.

• PX4 300 d - unable to connect to update Web site

  I have a strange problem. There is a road sign marked on the left (blue "!") and a message that the device failed to connect on the site to update. So I can't update my firmware. Anyone could help with this?

  Paladin79PL,

  Please try to manually download the firmware via the page of the Application Manager UI (instead of the software updates).

• MFP M277: Unable to connect to update HP printer MFP M277 with service

  I had problems with the our computers and devices Apple, power connect wireless to our printer MFP M277. They worked very well before, but all of a sudden, there was no link.  I rebooted the printer and then was able to resume printing of our devices.  This has happened several times in recent months, and every time I restart the printer, the connection is resumed. The printer shows that it is always connected to the network before restarting, but no printing is available.  I tried to connect to the service of HP update via the touch screen, but repeat me connectivity is not available!  The printer is able to print wireless, but it is impossible to connect to HP for the firmware updates?  Suggestions, please?

  Thank you

  Duane

  Hi @djduane,

  Here are some links to videos that illustrate the different ways to download the update of the firmware. Please, try it both ways and let me know if you were able to complete the update.

  Using a USB to update the Firmware on HP LaserJet Enterprise printers

  LaserJet Firmware update using the integrated Web server

  If this help will testify of my answer by pressing the 'thumbs up' below, or click on the button "Accept as Solution" if I helped you reach a solution.

• Pavilion Sleekbook 14-b000: unable to connect after update

  Hello.. I'm at my wits end trying to "fix" this problem of mine.
  It all started when I got a Ransomeware virus, I downloaded some antivirus software (AVG, kaspersky, Malwarebytes) to remove the virus from my laptop. He worked in a way if my files are gone. I read on a site that I have to reformat my laptop to completely eradicate the virus. So after that Kaspersky did a complete and all analysis, I got an update from Microsoft. Without thinking too much, I clicked on "update & Restart', which was a big mistake I guess... the patch was fine til he was stuck or frozen for 6 hours... looked up Google again and I just did a hard reboot for it. Laptop was fine again til when I tried to uninstall Kaspersky, when suddenly the blue screen appeared with a sad smile, saying: you need to restart... and I clicked on restart. After the reboot, I was sent to the usual display of the Date and time before entering the login screen. That's when I noticed now that my keyboard, touchpad and external mouse doesn't seem to work. I couldn't connect anymore. Looked up on Google on top of many sites for this correction... seems simple enough... all I had to do was either do a system restore, refresh or Reset... you all one by one... and none of them worked. Could not do a refresh or back to zero because the message says I have no drive partition or something and my drivers are blocked... System Restore didn't work cos the message said that an Antivirus program blocked or something and that I should uninstall it antivirus software FIR... But I can't connect even in safe mode... and I checked if it's just like the keyboard material that gives me this problem... It's not like I tested it in the recovery menu or something... can't remember I'm so tired
  So now I'm stuck with a brick of a laptop that only shows me the time and date of the day... I don't know what else to do... and I'm not a computer person... so I hope there is a way to fix this big mess...
  And thanks for reading the whole problem of long breath of my friends... I'm sorry.

  Have you tried a system recovery? See section-"recovery when Windows does not start correctly:

  http://support.HP.com/us-en/document/c03489643#n144

• Unable to connect to update ESXi host to vCenter

  So I have a client who does the following:

  Added several hosts, vCenter, went to install the updates using the Update Manager.  Host selected and selected re-mediation.  Server through the remediation proposals and restarted.  After server comes back online after the first reboot, it is impossible to connect to vCenter.

  Updated version: 5.5U3b ESXi

  Any help would be greatly appreciated.

  Sean.

  Hello

  I assume that your customer has forgotten to update the vCenter server before it has updated the hosts.

  You must have at least version 5.5 U3b on the vCenter to manage the hosts of these version.

  See interop matrix:

  https://www.VMware.com/resources/compatibility/SIM/interop_matrix.php

  Tim

• Unable to connect after update

  I was invited by my Ipad it needs to update. I ran the update and received a message that he was successful, and I have to follow a few steps. When I choose my network, it won't turn on. It worked 100% before the update

  If the notice you received is on an error with Apple's Activation servers,

  There is a problem known/glitch with Apple activation servers.

  Apple, I think, recognize and acknowledged this problem with difficulties with some models of iPad activation server and have stated that they are working on this issue and it will be resolved as soon as possible.

  I hope more early.

• "Unable to connect" remote pages ("could not read the chrome manifest file'); local pages OK; proxy server is configured to none - what to do?

  Firefox 5.0.1 claims to be updated (how he knew that if she could not connect to the Web?), Windows XP Home 2002 SP3 Dell DIM3000 Pentium 4, 3 GHz, 1 GB of Ram.

  Internet Explorer (8.0.6001.18702 with 128-bit encryption) and Opera (10.2? can't get it to display its version) both can access all the local and remote (Web) pages - Firefox does very well with all local pages but impossible to connect to what anyone remotely.

  One possible cause is security software (firewall) that blocks or limits Firefox or plugin-container process without informing you, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox in the list of permissions in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.com/kb/server+not+found

• Unable to connect to the remote Mitsubishi OPC server using datasocket

  I can read OPC items locally using datasocket, however if the customer is in another PC I get error 1184 when I try to connect to an element. The datasocket select URL works well.

  Both computers are Windows 7 machines in the same workgroup sharing the same username/password.

  I am able to read items through the DSC OPC client (but I don't want to use DSC). This seems to indicate that the DCOM security settings are good.

  I know there is a lot of documentation on remote access OPC and DCOM and I read most of the documentation by OR and other sources, nothing helps. None of the docs are to mention this specific error code. Any suggestions?

  Well, this is typical... After two days of efforts, just 40 minutes after you posted my question I found the solution in another thread of this forum.

  The remote registry service must be running on the server.

  Now I only need to rewind some of the many settings that I did it carefully, to find the minimum working conditions.

• Unable to connect to the internet through the router using Linksys N - USB

  network connection

  I have a Linksys G wireless router on my computer and a wireless adapter Linksys N - USB on my wife's computer. Wondering why she can't get on the internet via my router? Thank you

  Thanks for the response, took the computer to the PC Nerddss and they had all connected it in a few minutes. All right

• Unable to connect to my server through my laptop using the selections of my network places.

  I can't connect to my desktop (server) via my laptop using the selection of my network places, even if the shared my cell phone directories are available from the desktop (server). Any ideas on how I can fix this?

  I recently installed McAfee Total Protection on my laptop.

  Unlike the Windows Firewall, many third-party firewalls (such as McAfee) manage outbound as well as inbound traffic.  Make sure that the firewall is configured to recognize your LAN as a "trusted network".

  I can't tell you exactly how to do this because McAfee is not user guides for its most recent products available - you can use the built-in help of the product for the guidance system.

• HP pavilion model dv9910us: unable to connect to the internet with hp laptop using xfinity router/modem

  Hello

  I have a hp pavilion computer model with windows vista premium OS hom dv9910us.  I have a wireless modem/router xfinity gateway device.  I got it somewhere else and it worked using verizon with a router and a separate modem.  I also tried a location xfinity with a router and a separate modem and it worked.  I had a separate wireless adapter and installed and disabled the atheros ar5007 adapter in Device Manager.  This 2011 atheros adapter will work with this model computer using the operating system windows vista Home premium.  If so, could I leave the disabled ar5007 and install the 2011 to make sure it's ok before you uninstall the ar5007.  I'm really a novice and stumbling just my way through it.  Any help is appreciated.

  Hello:

  You must enable the atheros wireless card and install this driver.  It has no effect on the other you use.

  http://h20564.www2.HP.com/hpsc/SWD/public/Detail?sp4ts.OID=5060881&swItemId=ob_108905_1&swEnvOid=4059#.

  Then turn the PC off, remove the usb adapter, reboot and see if you can connect via the atheros card.