Unable to connect to a Windows Service on Windows 7

Similar Questions

• Pavilion 140 550 - t: unable to connect to the windows service

  Not sure if it's the good advice of post, but here goes.

  Just got the HP computer yesterday and installed Norton Security, Malwarebytes, and Windows Live Mail (do not like the version of Mail). Now, when I start it, I get "Unable to connect to the Windows Service" pop up and WLM crashes when I try to open it. What the DEVIL?

  Had the same problem on the one I just replaced. My laptop became the 'Group Policy' error thing, but I think I fixed it.

  Any suggestions? Windows is a joke!

  If it is Norton Security, then it's a firewall as well and firewalls blocking things, it's that they are supposed to do. So demand for three, you said that this is probably the cause.

  But if you do not want to test it, then try the system restore I've mentioned or reload the image origin, then just put in place the email again and see if it works without the other two installed, first to see if it will work with anything else in the picture.

• Error message: "unable to connect to a windows service windows could not connect to the system event." Unable to connect to the network, Windows Vista Home Edition

  Hello

  When I start my laptop there is a long pause between the home screen and the cover page of my office where the message "unable to connect to a windows service windows has no can connect to the system event. I am unable to connect to networks as says "the dependecy service or group could start. I checked some of the solutions to this problem, including the execution of the 'netsh reset winstock' program that did not work. Any advice would be very helpful. Thank you.

  Hello

  It would be a good idea to run the System File Checker tool to see if you have corrupted files

  "How to use the System File Checker tool to fix the files on system missing or corrupted on Windows Vista or Windows 7"

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  ___________________________________________________

  And Malware scan:

  Search for malware, if necessary using the safe mode with networking.

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  See you soon.

• Unable to connect to a windows service and as no internet connection

  Hello

  According to the title above, please help as I am not able to connect to the internet. I am posting this work...

  After I turn on my computer, I received this message:

  "Unable to connect to a windows service. Windows could not connect to the System Event Notification service. This problem prevents limited forest exploitation form used on the system. As long as administrator, you can go through the system event log to see why the service failed"

  From what I've read of other people with the same problem, I realized that they are able to have the connection to the internet.

  Hello

  1. you remember of any change to your computer before the problem?

  I suggest that you follow these steps and check if the problem persists.

  Step 1:

  Check if the Service Notification of system events is running or not. To check the services

  a. click on start

  b. in the start search box, type Services

  c. click right on - RUN as ADMINISTRATOR

  Check if benefits described has City status and startup type.

  System Event Notification Service started automatically

  Step 2:

  Might as well not connect to Internet is concerned, you can follow these steps and check.

  I suggest that you connect the Ethernet cable and start your computer in safe mode with network and check if you are able to connect to the Internet.

  See also:
  Why can't I connect to the Internet?

  Also valid for Vista.

• Windows 7 error: unable to connect to a Windows Service

  I have problems with my computer.  When I turn it on I get the following message and I can't connect to internet:

  Unable to connect to a windows service 
  Windows could not connect to the system event
  Service notification service. This problem prevents
  standard users to log on to the system.
  As an administrator, you can review the system
  Event log to see why the service has no
  answer

  I am running Windows 7 Enterprise, and it is slow to start after login.  I tried to boot in minimum mode, System Restore, uninstalled my antivirus software, uninstall my printer, netsh winsock reset.  Any help will be greatly appreciated.

  Since it is a copy of Windows 7 business, you really need to contact the campus administrator or post in the TechNet forums found here:

  http://social.technet.Microsoft.com/forums/en-us/w7itprogeneral/threads

  Sorry we can't be more helpful!

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error message "unable to connect to a Windows service.

  Whenever I boot my Toshiba ultrabook and go to Internet Explorer (not the tile splash screen), I get an error message: "unable to connect to a Windows service. Windows could not connect to the Service Agent all Windows users. This problem prevents standard users connect. As an administrator, you can view the system event log to see why the system has failed. "One of the consequences, it seems that when I go to my Windows Live email account via the Mail tile, it is no longer updates the Inbox (to any new email here for the last week or two). Another application (XE) is now longer provides updated information on its tile.

  What should I do?

  Hi Chris,

  Thank you for the update.

  I suggest you follow these steps to start the Windows user all install service agent and check.

  a. press the Windows key + R and type services.msc.

  b. search for Windows user all install agent service and right-click on it.

  c. Select Properties and dependencies tab.

  d. check the competent services for the process and close the window.

  e. now search DCOM Server process Launcher and set the type to be automatic and start the service to start.

  f. now seek the End Point Mapper RPC and set the type to be automatic and start the service to start.

  g. now go again to Windows user all install agent service and set the type to automatic and start the service to start.

  h. now, reboot the computer and check the status of the service. If it is not started, start it and look for the question.

  Let us know the status of the issue.

• Windows 8. error message unable to connect to a windows server.

  Hi, I have a dell Windows pc 8.

  He just started to give an error message

  Unable to connect to a windows server. Windows could not connect to the windows service install all agent users. This problem prevents standard users connect. As long as administrator, you can go through the system event log to see why the service did not respond.

  Right now my wife can not access his account. my email will not download the messages. I can't remove programs as it says I'm not administrator.  Also the external hard drive does not connect.

  Any help please

  Kumar,

  Thanks for your help. I found a similar problem after I posted. Vijay said on July 7, 2013. He proposed to test the computer in safe mode, and then perform a clean boot to solve the problem.

  I tested in mode of sure start before returning to the normal sign in and magically, it seems to have solved the problem.

  If the problem comes back, I will try your solution.

  Can not think of any changes made to the computer with the exception of a Windows update last weekend.

  Thank you for your support

  Phil

• Laptop HP 15: unable to connect to the Windows store for updates

  Setting up the new HP 15 laptop.  You seem very well online.  Icon says I'm connected to home WiFi.  But when I try to access the "shop", I said that I am not connected to the internet.  What Miss me?  I don't know what else to say.

  Hi there @ElliottO

  Welcome to the Forums of HP Support!

  I understand that you get an error message when you try to connect to the Windows store. You have problems with other Web pages having the same error, or are you able to navigate normally?

  With a bit of checking, it seems that it's an unusual problem, but there are several causes. Here are a few pages of various related forums that can help:

  Store Windows 8.1 does not connect to Internet - eightforums.com

  problem with connection/app store - eightforums.com

  Unable to connect to the Windows store (Windows, 8.1, 8, RT and Pro) -technet.com

  I can't access the store of Windows 8 -answers.microsoft.com

  hope something is useful for you.

• Unable to connect to the web services server

  Unable to connect to the web services server.  It is a common error that you might see if you try to enable web services.  If you receive this message, try the following steps.

  For Officejet printers

  1. open the internet browser type printer IP address.

  2 should bring you to the status of the printer page.

  3. Select the tab network at the top.

  4. left side select IPv4 under wireless.

  5. under DNS address Configuration select manual DNS server.

  6. for favorite enter 8.8.8.8

  7. for alternate enter 8.8.4.4

  8. Select apply. You can get a warning saying that this could break the connection which is very good.

  9. turn the printer off for about 30 seconds and then try to enable web services.

  For Photosmart printers

  1. Enter the printer's IP address in a browser.

  2 Select the network at the top of the page.

  3. on the left, select network.

  4. Select Network (IP) address

  5. select manual DNS server

  a. manual Preferred DNS should read 8.8.8.8

  b. alternate DNS server should read. 8.8.4.4

  6. Select apply you could get a fair warning select OK

  I hope this helps!

• Error when you try to connect to games for Windows Marketplace: unable to connect. ID Windows Live ID or the password entered is not valid. Enter your information and you reconnect. Code: 80048823

  Unable to sign in to games for Windows Marketplace

  Sign in to games for Windows Marketplace issues

  This message can connect to everything but the games for Windows Marketplace

  Unable to connect. ID Windows Live ID or the password entered is not valid. Enter your information and you reconnect. Code: 80048823

  Hello RobBurton,

  I suggest that you post your question in the Games for Windows Live forum below:
  http://forums.gamesforwindows.com/t/785.aspx

  It would be best to help with this question.

  Thank you

  Marilyn

• Unable to connect to a windows service

  Hello

  I work in a school and we have two vista computers in our lab that display the "Cannot connect to a windows service" message and will not allow administrators to connect.

  I tried "netsh winsock reset" but this does not solve the problem.  I am also unable to run "System Restore", as it is there before the dates of restoration that are avilable.

  Can anyone help?

  Thanks, Floic

  The full message is:

  "Windows does not have to connect to the Group Policy Client service." This problem prevents limited users to logon to the system.  As user administrator, you can view the system event log to find out why the service has failed"

  Hello EilishR,

  The question you have posted is related to computing on a network server and would be better suited to the Microsoft TechNet community. Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en-us/category/MicrosoftOnlineServices
  Thank you!

• After logon Windows 7 my PC starts but displays the directed message "unable to connect to a windows service.

  Continue message "Windows does not have to connect to the System Event Notification Service service.»

  Unable to connect to the internet or home network. Cannot 'see' router, although only connected by LAN & Wireless N adapter (even if the wireless adapter has stopped working since the problem occurred).  Router is fine as I can connect the laptop to wireless internet and LAN. The PC is very slow and the glass on the toolbar icons have been replaced by the standard version. Most of the software on the PC runs but I can't access to things like the event log.

  Running SCF / Scannow. CHKDSK and made a complete analysis with Zone Alarm Extreme Security which none have discovered something wrong. I wonder if it is a virus on Board that is not windows & cannot be treated within MSDOS.  If this is the case how get Zone Alarm to sweep to the back?

  My system is 64 bit, with Intel CORE I7 clocked at 2.8 GHz, 8 GB RAM & 2x1.5TB disks in a RAID 1 (mirror) configuration.

  Any help ressemelable the problem would be appreciated

  Hi Clem,

  1. you made any hardware or software comes to the computer before the show?

  2. is the computer connected to a network domain?

  This problem occurs when a new disc is added to the system while the background services always begin.

   
  Here are some ways you can follow to resolve the problem:
   
  Method 1:
  You can check if System Event Notification Service is enabled and set to automatic.

  
  Steps to follow:

  1. click on start, select run and type services.msc

  2. scroll down until you find System Event Notification Service and make sure that it is running and set to automatic.

  Also make sure Remote Procedure Call following the same steps above.

  3. restart your computer.
   
  Method 2:
  Download and apply the patch using the link:
  The Office will not load and displayed only a black or blue background after you log on to a computer that is running Windows 7 or Windows Server 2008 R2
  http://support.Microsoft.com/kb/2590550
   
  Method 3:
  a. click the Start button.

  b. type cmd in the search text box.

  c. press Ctrl-Shift-Enter keyboard shortcut to run command as administrator prompt. Allow elevation request.

  d. type netsh winsock reset in the command line shell, and then press the Enter key.

  e. restart the computer.

   

  See also:

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-in/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

   

  For assistance with Zone Alarm, publish the query in the Forum Zone Alarm.

  Reference:

  http://www.ZoneAlarm.com/security/en-us/community/user-forum-agreement.htm

   

  Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.

• HP ENVY 4-1200 ultrabook: unable to connect to the windows service

  I got this notebook for a week, it has started to come on the screen at startup * unable to connect to windows. Windows could not connect to the group. Political Clent. This problem prevents standard users connect * did anyone know what I can do about it at the start. Thank you

  Please try the fix described below:

  

  If you found my answer helpful please say thank you by clicking on the icon of the thumb.
  If my answer has solved your problem, please mark it as accepted Solution. Thank you!

• Unable to connect to the Windows Live Calendar service

  get error message: there was an error when you attempt to connect to the Windows Live Calendar service. If the error persists, check if there is an upgrade of Windows Live Mail available or communicate with the service.

  No upgrade to Windows Live Mail available.  Have uninstalled & reinstalled. Task manager services wlcrasvc is stopped.

  Any suggestion how to solve?

  Hello

  This forum deals with aspects of electronic mail on your computer network.

  If the problem related to the Live mail Server, or configure the features of the software, you'll do better by logging and displaying the question on Live Mail support forum.

  My moderator tools cannot transfer messages on the forums of Windows,

  Please re - ask your question on the Forum Windows Live,

  Windows Live Mail Forum
   
  http://windowslivehelp.com/forums.aspx?ProductID=15

  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

• Unable to connect to the wifi service in my house, how can this be repaired?

  I have a dell laptop and I am trying to understand how to do this.  I enter the key of the service network and the message says that the network password must be 40-140-bit according to your network. It can be entered as ascii characters 13-5 or 10-26 hexadecimal characters? How can this be repaired?

  Hi Vickiloo06,

  ·         Did you do changes on the computer before the show?

  ·         What happens exactly when you try to connect to the wifi service, you receive error message?

  I suggest you to consult the following Microsoft Knowledge Base article and check if it works.

   

  Unable to connect to an access point wireless with Wi - Fi Protected Access update installed

  http://support.Microsoft.com/kb/821442

   

  How to troubleshoot wireless network connections in Windows XP Service Pack 2

  http://support.Microsoft.com/kb/870702

  I hope this helps.