Unable to connect to download FF update of the message from the FF site. What should I do? have the new IMac.

Similar Questions

• Download Lightroom 4 on the new iMac

  This is probably a stupid question...

  But I plug the new iMac, a few months ago and then I just bought the new Adobe Photoshop Lightroom 4... and he says it's for windows and mac os.

  First of all, I went on the following link to download: http://www.adobe.com/support/downloads/detail.jsp?ftpID=5521

  Then after downloading, I got the following error:

  "Cannot open the application"Lightroom_4_LS11_win_4_3.exe"because the Microsoft Windows applications are not considered supported on OS X."

  
  What I am doing wrong?

  and he says it's for windows and mac os.

  It's true. This means that the serial number works on Windows and Mac.

  However, you must use the correct Installer. The Windows Installer does not work on Mac OS x and vice versa.

  You must download the Mac version to install on your Mac. Then enter your serial number.

• Performance issues of Lightroom after updating to the new iMac

  I used an iMac 2013 end with 3.5 Ghz i7 and 3 TB Fusion Drive and 32 GB of RAM and had very good performance.

  I've recently updated to an iMac of retina with i7 4.0 Ghz and 512 GB SSD and 32 GB of RAM. I also bought an external LaCie Big 1 TB drive which has 1 300 MB/s read/write speeds and put my Lightroom library, photos and ACR cache on this drive.

  In view of these changes, I expect an increase in the performance of my previous system. However, I see the opposite. In Lightroom when I apply a preset, I sometimes get a beach ball of rotation for a few seconds before she applies. In Photoshop, using the Google Nik filters, I when I move the sliders effect is not instantaneous as it used to be; Instead, I see chunks of the screen redraw.

  All other applications on my system seem to work very well. Photoshop and LR open both faster than they on my previous iMac. But their use seems slower that me perplexed.

  Any ideas?

  I guess the beach ball, that you see is the generation of the 1:1 Preview or how long it takes to calculate overall gross instead of a preview of lower res. The display on these new iMacs is so gigantic that the standard preview size is way too small (the max is 2880 pixels long, which is a factor of 2 too small for the retina display). The machine of the retina has 4 x as many pixels as the iMac 27 "older. The difference in speed between 4.0 Ghz and 3.5 GHz is not enough to compensate for this difference in number of pixels that should be calculated from the raw to catch up so you should see a decrease in the speed if you're using Lightroom full screen. Try the Lightroom window about 1/4 of the screen and see if that changes things.

• Unable to connect Adobe cloud after update the expiration date of credit card

  Unable to connect Adobe cloud after update the expiration date of credit card.

  The activation server show that CC has expired on 21 September, 2015. Please renew the subscription if possible or re-purchase.

  The best option will be to contact Adobe support for this.

  Concerning

  Stéphane

• Unable to connect to a network or to the Internet on my Dell XPS1530.

  Unable to connect to a network or to the Internet on my Dell XPS1530. When I try to diagnose problem, I get a message that reads "Network Diagnostics cannot run because the Diagnostics Policy Service is not running." Having exhausted the patience all the phone with my IP and Dell, which tells me that it is a problem of Microsoft software. I have two other computers and a PS3, and I am able to connect to the Internet through one any of them. The XPS works under Vista with SP2. Can someone help, please? Thank you.

  Go to start / Control Panel / Administrative Tools / Services and go to diagnostic policy Service and set it to automatic and start it.  If it does not start, check the dependencies and make sure they're too automatic and rnning.  Then see if you can run Network Diagnostics.

  You can get in trouble with your device drivers.  Go to Device Manager by going to start / find and type Device Manager and enter and then double-click on the program icon that appears.  Check each device to a red x, yellow! or white?  These identify devices with problems probably (drivers, but also of conflict or something else).  Click on each for more details and troubleshooting tips.  If you need to get drivers (and you should get those developed to date for the network card and regardless of the device you use to connect (such as a router wireless or such) and all you have time to do - they can help way beyond simply solve this problem), let the computer dealer or the manufacturer of the device (NOT of Microsoft Updates).  In fact, you must disable automatic updates in Windows Update driver as follows:http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/. Follow these steps to get the drivers: http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm.  Once you have the drivers, you can install them via the Manager device as follows:http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html.

  When I'm in a lke your situation, I usually start from scratch.  Create a new network connection by ensuring that all settings are correct.  Check all the cables (if there is).  You have already reinstalled the drivers - make sure that no firmware or software is also necessary.  Configure the network sharing settings and make sure that you are ready to discover the network and such.  Check other computers to see their settings to make sure you get yours right and essentially the same thing (the same exatly so is another Vista machine connected in the same way).  Go to start / Control Panel / Internet settings and make sure that it's too fixed properly.  To connect, then try again. If this is not the case, remove some time to cool down and then start again with another new connection.  It's almost certainly a parameter that is not correcct (something no doubt very simple).

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Where can I find the download more updated of the Windows Migration Wizard?

  Where can I find the download more updated of the Windows Migration Wizard?

  Article Apple describing the use of the Windows Migration Wizard that is located here – move your data from a Windows PC to Mac - Apple Support

  This article includes a link to the download page for the latest version and the download page is here - Migration of Windows Wizard v1.0.5.7

  It does not seem to have been updated for a couple of years and doesn't mention Windows 10. While many the most applications that are compatible with Windows 7 and 8 works perfectly under Windows 10 I can say from personal experience, if this also applies to the Windows Migration Wizard.

• I get 656 error Code when I try to download my updates to the windows desktop.

  I get 656 error Code when I try to download my updates to the windows desktop.

  Do you mean * 646 *?

  See:

  http://support.Microsoft.com/kb/2258121

  Very popular.

  TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• My computer has stopped downloading of updates due to an era 8007000 b. What does that mean?

  MY computer has stopped downloading of updates due to an era 8007000 b. What does that mean? Donald strickland

  Hello donaldstrickland,

  Thank you for using Microsoft answers Forums.

  Solution:

  Windows Update, Error 8007000 b

  If you receive the 8007000 b error when you try to install updates for Windows 7, the Windows file system transaction log is damaged. The transaction log is used by the Windows file system to recover when a file error occurs. To correct this error of update, you clear the log. Here's how:

  To clear the file system transaction log

  1. click on the Start button and in the search box, type command prompt.

  2. in the list of results, right-click Guest, and then click Run as administrator.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3. at the command prompt, type the following command and press ENTER. (This command assumes that drive C is the drive where Windows 7 is installed. If Windows is installed on another drive, change the drive accordingly letter.)

  true fsutil resource setautoreset C:\

  4. you should see a message saying that the operation was completed successfully. If this is not the case, check your spelling and try again.

  5 Type Exit and press ENTER to close the administrator: command prompt.

  6. restart your computer.

  7. download and install the update again.

   

  That should solve the problem.
  

  
  Thank you.

   

  UDAY $012 please let me know that whether the solution worked or not, I thank you and appreciate your comments. URGO

• Try to download an update of the firmware with a file extension ROM Vista says it's an unrecognized file type

  Title: download original ROM files on Vista

  Try to download an update of the firmware with a file extension ROM Vista says it's an unrecognized file type. Patches?

  You must get the update of the firmware that can handle the type of file the same place ROMA, you got the firmware file.  From what I see, they seem specific to the product updated. http://www.FileInfo.com/extension/ROM if they don't have it, talk to their technical support staff and ask them what type of program is required to install the firmware provided in ROM format and where you can get it.  Vista doesn't have the ability to read a file ROM type  Some software must be added to give this capability.

  Here is an article I read: "various hardware upgrades and emulators use the ROM file extension." A user needs a flash program usually available on the website of the manufacturer of the motherboard. The user must not flashing BIOS unless the user knows that he has the image of his mother. An error or the computer may be turned off when the wrong BIOS image is flashed. "So be very careful here, or you can completely disable your system.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Unable to connect to remote PowerShell and get error message.

  I have two computer to Windows 7.

  Unable to connect to remote PowerShell and this error message

  nvoke-command - computername XXXXXX - scriptblock {}
  get-process} - administrator credentials
  [XXXXXXX] failed to connect to the remote server XXXXXX with the
  error message: WinRM client cannot process the request. If the
  authentication scheme is different from Kerberos, or if the client computer is
  not joined to a domain, then HTTPS transport must be used or the destination
  machine must be added to the TrustedHosts configuration. Use winrm.cmd
  to configure TrustedHosts. Note that computers in the TrustedHosts list might
  do not be authenticated. You can get more information about it by running the
  following command: winrm help config. For more information, see the
  about_Remote_Troubleshooting help topic.
  + CategoryInfo: OpenError: [XXXXXX], PSRemotingT
  ransportException
  + FullyQualifiedErrorId: ServerNotTrusted, PSSessionStateBroken
  PS C:\windows\system32 >

  PS C:\Users\Administrator > Invoke-Command - ComputerName XXXX - ScriptBlock {get-process} - administrator credentials
  [XXXXXX] failed to connect to the remote server XXXXX with the following
  error message: the client cannot connect to the specified destination in the
  request. Verify that the service on the destination is running and that he accepts the
  applications. Consult the logs and documentation for running management service
  on the destination, most IIS or WinRM. If the destination is the WinRM
  service, run the following command on the destination to analyze and configure the
  WinRM service: "winrm quickconfig". For more information, see the
  about_Remote_Troubleshooting help topic.
  + CategoryInfo: OpenError: (XXXXX:String)], PSRemotingTranspo
  rtException
  + FullyQualifiedErrorId: CannotConnect, PSSessionStateBroken

  # Outgoing connection is fine because I can connect to a different machine here. However incoming connection does not work

  # Tried several things like "Enable-PSRemoting - Force." and it starts Properperly

  # And since I put the machine in workgroup, as well run "Set-Item WSMan: \localhost\Client\TrustedHosts * ' (it is running successfully as well)

  # Infact WinRM QuickConfig will not work.

  # And tried with and without firewall. and also applied several patches, but has not solved the problem

  Please notify

  Original title: WinRM

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• Yesterday, I have successfully downloaded an upgrade of items 10 to 14. No problems. This morning, I downloaded an update of the 14.1 elements. Now I have nothing. How can I fix it?

  Yesterday, I have successfully downloaded an upgrade of items 10 to 14. No problems. This morning, I downloaded an update of the 14.1 elements. Now I have nothing. How can I fix it?

  Hi Christangles,

  We will be happy to help you, but before that, there are a few information such as:

  What is the exact error message/code if you found one?

  What operating system you are using the version?

  This is Photoshop Elements or Premiere Elements you use?

• I do not see one of my apps, I see everything on my desktop except the apps app! He said: download error, I need the new Prime Minister because I started to edit in my school where everything is updated. Help! I even tried to download from Adob

  I do not see one of my apps, I see everything on my desktop except the apps app! He said: download error, I need the new Prime Minister because I started to edit in my school where everything is updated. Help! I even tried to download from Adobe on the web but it brought him back to the top of the desktop application...

  Please visit: CC help | Download error in the applications tab of Creative Cloud Desktop Application

• Why won't my iPhone 5s 9.3.5 update of the new iOS10?

  Why won't my iPhone 5s 9.3.5 update of the new iOS10?

  Hello Kevin Bouah,
  Thank you for using communities of Apple Support.

  I understand your message that you were not able to update your iPhone to iOS 10 5s. I know how exciting it is when a new version of the iPhone software will be released. If you tried to update your iPhone via Wi - Fi under settings > general > Software Update and cannot update your iPhone, I recommend that you use iTunes on a computer. Make sure that your computer software and iTunes are updated to the latest versions. The following steps will help you to upgrade your software to the iPhone via iTunes on your computer:

  Update the software on your iPhone, iPad or iPod touch iOS

  Update your device via iTunes

  If you are unable to update wireless on your iOS device, you can manually update using iTunes on a computer on which you trust. If your computer uses Personal Hotspot on the iOS device that you update, connect your computer to another Wi - Fi or Ethernet network before update you.

  1. Install the latest version of iTunes on your computer.
  2. Connect your device to your computer.
  3. Open iTunes, Select your device.
  4. Click summary, and then click Find updates.
     
  5. Click on download and update.
  6. If requested, enter your access code.

  Best regards

• Restrictions does not not after ISO put 10.0.1 update with the new iPhone 7

  Restrictions does not after ISO put 10.0.1 update with the new iPhone 7 any which option of ranking app I don't choose no changes are made.  All the patches?

  Thank you

  Hello Launcher,

  Thank you for bringing your question about Restrictions here in Apple Support communities. My understanding of your question is that you change the Restrictions, but no change is noticed. I tried the same on my iPhone 6 Plus running iOS 10 and noticed a similar situation. Please allow me the opportunity to explain how the Restrictions is designed to work. First, I put my limitations for applications, do not allow Apps and together 4 +, which basically means everything beyond 4 + will be blocked from buying. Then I went to the App Store and the first app that caught my attention was NCIS: hidden crimes. This app is rated 12 + and is definitely an application I would not want my toddler to help. It is that Restrictions come into play. When I type on NCIS: hidden Crimes, the Get option is grayed out. Restrictions does remove all apps, songs, books, etc. from view, but it will prevent the purchase, download, and install all applications rated above the setting you choose when you set up restrictions. It's the help article that discusses the Restrictions and prevent purchases: Use Restrictions in order to avoid buying on iPhone, iPad, or iPod touch.

  I checked on the restrictions help articles, and I understand where it can be a bit confusing. In the help article Use Restrictions on iPhone, iPad and iPod touch, it says "You can use Restrictions, also known as parental control, to block or limit specific applications and features on your iPhone, iPad or iPod touch." This means in fact that apps, features or services (rated above that helped you, or if you have turned off completely) can he no longer appears on the device if the restriction is activated and starts blocking them. I also tested this by activating Restrictions and turned the cursor for Safari to off. When I went back to the home screen, Safari doesn't show any more and I could no longer use it.

  I hope this helps to clarify how the Restrictions. If my understanding of the issue was not accurate to the issue that you are experiencing, I will be happy to pursue this issue with you. Please indicate exactly what you took measures, and what expectations you had or the some restrictions, applications, features, or services you are restricted. Thanks again and have a great rest of your day!

• How can I connect Epson R1800 with the new iMac?

  Older to make sure printer, but it is good quality and I have a lot of ink and the large photo paper I want to use up. The printer is connected to my iMac plus old (2009) with the cable provided with the printer and an ethernet (Sonnet simply fast) adapter. It seems that the new iMac is a 10/100/1000BASE-T Gigabit Ethernet (RJ-45 connector). Although my Sonnet connector seems to fit in the port, I can't get the computer to recognize that there is a connected printer. Until I can do that, it seems that I can't download the printer driver and everything what I need Epson. (Old iMac died, failed to retrieve the latest driver from there).

  So do I need a different Ethernet adapter? Alternatively, I have USB ports available, how to connect to the printer with a USB connection?

  This printer has a USB port so just connect with a USB cable to the USB port on the iMac.  Download and install drivers from here: printer drivers Epson v3.2 for OS X.

  After installing drivers go to Scanners & printers/system to complete installation.

  Printer is supported you in accordance with this Apple document: printer and scanner software available for download for your Mac - Apple Support