Because Windows 7 was installed lost Audio

Similar Questions

• How can I recover my deleted windows vista was installed on my laptop?

  Hello world

  I have a LENOVO 3000 v200 laptop. When I bought this, Windows vista had been installed on it. Accidentally, I formatted my hard drive. because I have no CD Win I loos my operating system. But I deleted my windows certification label (the certification is glued to the butoom of my pc) and so I have the product key. Can I get or download my microsoft windows? If so, exactly where?

  You will need to contact Lenovo http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=YAST-3P2QYL to request a set of recovery disks.  You can also have a recovery Partition that will also do the trick - Lenovo to ask how to access if you do, and if it is possible to make your own recovery disks and how to do in the circumstances.  This is recovery Lenovo process - no Microsofts so that they are those who you must contact and obtain the required information and records.  With these discs and your product key, you will be able to restore the computer to the original factory conditions.

  I'm sorry, that we cannot help you more.  Here is Microsoft's policy on replacement software:http://support.microsoft.com/kb/326246/en-us.  There is no free download of Vista and Microsoft provide copies (if they even copies of Vista more).  You have to deal with Lenovo to this situation.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Back to Vista after not authentic Windows 7 was installed

  a friend installed a copy of windows 7 ultimate in gift, now is to show that counterfeiting;

  I want to go back to vista, but it was removed from my laptop,

  How can I download a copy of vista and use my original key to activate it, preferably without any cost more

  Really, the only option is to contact the manufacturer of the computer and get a set of recovery disc for a small fee (no cost) to restore your system back to factory conditions.  It would be a pure install so be sure that you have backed up your important data (programs, settings and updates will have to be re-installed).  Another option is to find someone with an Installation disc full Vista genuine in the same size of the bit and use it to do the installation with your original key (assuming that the key was for a full installation - if it was an upgrade, you must install and activate the original operating system first and then perform the upgrade - you can not use a key to upgrade to a full installation).

  There is no download legal, free Vista product from anywhere.

  Here is Microsoft's policy on replacement software: http://support.microsoft.com/kb/326246/en-us.  As you can see, it won't be a big help in this situation if you want to avoid or at least minimize costs.

  I'm sorry, we can not help you more, but these are your options.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I can't install my Windows Vista Edition full upgrade because WINDOWS POWERSHELL is installed. How can I remove it?

  -Need to uninstall for Vista Ultimate Upgrade - HOW?

  This question has been posted before, but I don't see an answer to the problem.

  I just reinstall Vista after replacing a failed hard drive - new clean install.
  When I try to run my upgrade: Home Premium to Ultimate, I get a message that I need to uninstall Windows Powershell first.  How to uninstall it?  When I try the usual functionality of uninstalling programs, Powershell is not listed as an existing program.

  Hello

  This should help you.

  "Windows PowerShell 1.0 for Windows Vista Installation Package"

  http://support.Microsoft.com/kb/928439

  How to uninstall Windows PowerShell

  To uninstall Windows PowerShell 1.0 in Windows Vista, follow these steps:

  1. Click Start, in the Search box, type appwiz.cpl and press ENTER.
  2. In the tasks list, click View Installed Updates.
  3. In the list to uninstall an update , right-click right of Windows PowerShell (TM) 1.0 (KB928439), click on uninstall and follow the instructions to remove Windows PowerShell 1.0.

  See you soon.

• Windows 8 was installed after Photoshop.  How to Photoshop now?

  I installed Photoshoped elements 11 on my computer.  Subsequently, Windows 8 has been installed on the machine.  Now, I can not find Photoshop.  How to 'return' without using the second installation of the program Photoshop?

  you will need to use the 2nd installation/activation.  If you need a different installation/activation, you will need to contact customer support to allow you to activate (which looks like to) a 3rd copy of the pse.

• SIRIUS Internet Radio Media Player not working not properly because Windows update installed on my PC

  My Sirius internet Player multimedia radio is not working properly because Windows updates are installed on my pc. updates KB971486 KB974455 KB974571 KB975467 KB975517 KB974155 KB976525 KB974470.  Tested internet radio/media player for sirius on another computer and there is no problem.  Have tried all of the fixes recommended by sirius... This update of windows seems to the source of the problem.

  Does anyone have an idea with security update could be the cause of the problem?  Should I uninstall this?  If I find one that is causing the problem, how can I block it to move again?

  Thank you

  Hi Smwall,

  Welcome to the Microsoft Answers site!

  Do you have a particular error when you try to play?

  Method 1:

  You can try to start check and clean boot if the problem persists. Clean boot boot will help you know if all the background programs conflicted with the player. To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  The steps to perform a clean boot are given below:

  1 log on to the computer using an account with administrator rights

  2. click on start, type msconfig.exe in the start search box and press ENTER to start the System Configuration utility.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue

  3. on the general tab, click Selective startup, and then clear the check box load startup items. (The check box use the file Boot is not available.)

  4. on the Services tab, click to select the skin all the Microsoft services check box, and then click Disable all

  Note: Following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use with existing restore points system restore utility

  For more information about the clean boot, follow the below given link:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. click on start, type msconfig.exe in the start search box and press ENTER.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  2. on the general tab, click the Normal startup option, and then click OK.

  3. When you are prompted to restart the computer, click on restart

  Method 2:

  You can try to uninstall the updates one by one in the windows update window and check if the problem persists.

  To uninstall the updates from windows update:

  1. open installed updates by clicking the Start button.

  2. click on Control Panel.

  3. click on programs

  4. under programs and features, click view installed updates.

  5. click on the update that you want to remove, and then click Uninstall.

  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  For more details, visit the below given link:

  Remove an update

  http://Windows.Microsoft.com/en-us/Windows-Vista/remove-an-update

  Method 3:

  Alternatively, you can hide the update, which does not allow the player to play.

  Follow the below given steps:

  1. open Windows Update by clicking the Start button. In the search box, type Update, and then in the list of results, click Windows Update.

  2. do one of the following:

  ·         Click the link that tells you important updates are available if you have some updates to hide.

  ·         Click the link that tells you optional updates are available if you have optional updates to hide.

  3. Select an update that you want to hide, right-click, and then click hide update. Do this for each update you want to hide.

  4. click on OK.

  For more information about Windows Update troubleshooting visit the below given link:

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-with-installing-updates

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 7 is installed, Windows 3 installed later

  Windows 7 was installed on my system some time ago, and then 'well informed' teenage granddaughter arrived and installed Windows 3.  I have problems more now to access the documents.  I had converted all documents on Windows 7, but it seems that the system is through two programs before getting the necessary document.  I just read on a programme of "Compatibility" Windows - which could help me or am I lost in man s no land now?

  Windows 7 was installed on my system some time ago, and then 'well informed' teenage granddaughter arrived and installed Windows 3.  I have problems more now to access the documents.  I had converted all documents on Windows 7, but it seems that the system is through two programs before getting the necessary document.  I just read on a programme of "Compatibility" Windows - which could help me or am I lost in man s no land now?

  Is 'Windows 3' actually 'Windows 8'?

• Why can not install WAA hearing in windows 7, it says found audio device check is not compatible audio settings?

  can I do, before it was working fine and then I restore all my files and I couldn't reinstall the program

  Juanrodriguez dear reflects

  As you mentioned that you restore the files, what exactly did restore? You have restored the calm system restore point earlier where your system had no installed audio device driver? Restore you the windows on your system to a point where you have installed everything first?

  If Yes, then the solution is that search Windows Update for device drivers appropriate for your system or search the website of the manufacturer of the system drivers section to download updated sound/audio drivers. You are facing this problem because you restored to a point where no audio device has been installed on your system, up to lets say this day here.

  You can install the Audio drivers from a CD of support you received when you purchased the computer. Or view all of system restore CD/DVD that came with your system in order to restore the parameters to the constructor.

• The attempt to update Windows to install Reaktek Audio drivers

  I have two HP Windows XP SP3 PC that for some time, I could not get Windows Update to install the Realtek audio driver material it is recommended to be installed.  It gets to a point, then asks in a specific location locate a file.  Of course, I don't know why she asked this prompt, so I cancel and can never get the update to load.  What's up with that?  Any help?

  Hello

  Windows updates is usually only older drivers certified such as this one, MS is far behind the driver certification.
  HIDE the update by right-clicking on it and HIDE. Then update your drivers manually and I also would
  driver updates - see how and why below.

  Here, you want to mainly updated Realtek driver direct from Realtek.

  Click on the HD Audio Codec on the right side of this page.

  Realtek
  http://www.Realtek.com.tw/

  -------------------------------------------------------------

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system. For
  each driver in the list, additional useful information is displayed: load address of the driver, description,.
  version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Always check in the Device Manager - tab drivers version you install actually shows up. This
  because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
  pilot - reboot - check that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• After you install an audio convert I have no volume and it says that my computer was not installed

  I installed an audio converter after that my computer said that I needed now, I have no volume. I've been bad shot I have no volume now installed in my computer, I don't have the software that came with it I don't know if they gave it to me or not. http://maquetland.com/v2/index.php?page=vision do?

  Do you mean that you see something like this:

  When you use certain features sounds and Audio devices, you see a message like this:

  Windows cannot display the control of volume on the taskbar because the Volume control program has not been installed. To install it use Add/Remove programs in Control Panel.

• Windows 7 not genuine was installed Windows Vista, no internet connection now

  Help! I got my windows 7 to windows vista because my windows 7 was not authentic. After the installation of windows vista, it had no internet connection. After checking what is bad, he says that there is no network card installed. Please, what should I do? I called Dell, Microsoft, Cisco, and all these companies want to charge me money to go ahead.

  Hello

  Your Dell with an Internet connection, use the computer on which you are about to post here use fo this response.

  Go to Dell drivers and download link:

  http://www.Dell.com/support/drivers/us/en/19/DriversHome/NeedProductSelection

  The link > key in your computer series and model number > then look for network adapter drivers (or how Dell expressed) > download and save to the desktop on the computer that you use to do this > copy on a Flash drive and transfer and then install to the other computer.

  If you still have problems with drivers to download, please ask in the free Dell Support Forums at this link:

  http://en.community.Dell.com/support-forums/default.aspx

  See you soon.

• applesyncnotifer has stopped working unable to locate the component that this application has failed to start because corefoundation.dll was not found. Re-install the app

  Original title: applesyncnotifer has stopped working

  pop-up that said, apple syncnotifer.exe cannot locate the component.  This application has failed to start because corefoundation.dll was not found. Re - install the app may fix the problem.

  Hello

  It's all part of itunes

  Uninstall and reinstall itunes

  Follow the information from apple to the link below

  Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7

  http://support.Apple.com/kb/HT1923

  and or ask for their support of itunes

  http://www.Apple.com/support/iTunes/

  Also try the discussions of apple itunes

  http://discussions.Apple.com/category.jspa?categoryID=149

• Hello guys, I installed Windows which was not original, and now it's not true, I do not know the product key.

  * Original title: product key

  Hello guys, I installed Windows which was not original and now it's not true, I do not know the product key and I want to activate how?

  If the edition installed does not match the edition, you have a product key because it will not activate.

  If you have a product key for the specific edition installed, try the phone activation:

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Windows 7 RTM / Realtek HD Audio drivers not installed correctly.

  I have a macbook pro, and I was told that I need to install the latest Realtek HD audio drivers, as the drivers included on the OSX cd are not good.

  I downloaded both the executable installer for the drivers and the zip file, but regardless of how I approach it, after installation and reboot, I find myself with a little red cross on my audio down to the right icon, no noise, and after a quick diagnosis, I said that there is a problem with the Realtek driver.

  Driver audio windows HD, which he comes back if I ask windows to "solve" the problem does not give me any sound on my speakers, no use of a microphone and is just horrible.

  Why do I get the difficulties to get the drivers to work?

  Hello WhoFly,

  Thank you for visiting the Microsoft answers Site.

  You can check with the vendor for the AC 97 Audio Codecs for installation instructions or read readme file for installing the audio driver. You can also provide the model number of the audio chip on your motherboard to the vendor for more information on audio driver installation instructions.

  I hope this information is useful.

  Thank you, Mary
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I get the message when you set up a new user "a temporary user profile is loaded because Windows was not able to connect you with your local profile."

  Dear all,

  I have a Windows PC in my office. Because of some configuration issue, I deleted the domain user and tried to connect to the system with the same user credentials. It identify you with the credentials of the user, but I get a message saying: "a temporary user profile is loaded because Windows was not able to connect you with your local profile."
  This system is joined to the domain and the profile is an Active Directory user.
  Here are the details of the event ID:

  Details Product: Windows operating system Event ID: 1515 Source: Userenv Version: 5.2 Symbolic name: EVENT_PROFILE_DIR_BACKEDUP Message: Windows has backed up this user's profile. Windows will automatically try to use the saved profile the next time the user connects. Explanation A temporary user profile is loaded because Windows was unable to connect with your local profile. A possible cause of this is if your local profile has been corrupted or that you no longer have the correct privileges for profile records. Note: Any changes made to the temporary profile is lost once you disconnect. User action Search the profiles additional events in the event log for more information on the reason why this happened or contact the system administrator for further assistance.

  There is currently no article for this specific error Microsoft Knowledge Base or an event message. For more information on other technical support options, you can use to find answers online, see http://support.microsoft.com/default.aspx.

  Please, help me to create the same user profile in the system with formatting system.

  Hello

  I suggest you to refer to this link and check if it helps:

  http://support.Microsoft.com/kb/947215

  It will be useful.