Unable to connect to LAN__ wireless

Similar Questions

• Unable to connect to other wireless networks

  RE: Unable to connect to other wireless networks

  • My computer is a HP Pavilion dv7 1232nr Entertainment Center
  • My OS is Windows Vista 64 bit
  • I have installed many things over the past year, but know that at some point, I was able to get on free Wi - Fi in hotels

  I am able to connect to my network, but when I try to connect to others, I'm unable to do. I have their password and my computer SHOWS I have a connection, but actually I'm not. When I try to connect to the Internet, the server is not found. I called the support/supplier for the last network owner and he told me that even if I "thought" I was online, I really wasn't. He said that it is probably a router configuration for that person that does not correspond to my computer. As I was just visiting, of course I didn't mess with their router. This happened to me twice, with once the provider is the same as mine, but the only way I could get connected with a hard link.

  So far, the only thing I did is to see if I could connect to free wireless (municipal library) and was unsuccessful. I think the problem is with my settings, but am not sure. I have to be careful to change anything because I can't afford to lose my connection at home because my job depends on it.

  Any suggestions?

  Thanks for any advice you might be able to share.

  Hi, Pat:

  I am very confident that if you download and install the driver from the link below, your problem will be solved.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & CC = US & prodTypeId = 321957 & prodSeriesId = 3688868 & swItem = ob-99392-1 & mode = 3

  Paul

• Unable to connect to the wireless network, error message "Windows could not finish repairing the problem because it is impossible to perform the following action. Renewal of your IP address.

  Original title: Unable to connect to the wireless network

  Unable to connect to the network wireless Toshiba Satellite A105 PC running Windows 7.  "Windows could not finish repairing the problem because it is impossible to perform the following action. Renewal of your IP address.  Works with Windows XP SP2, IE 8.00.6001.18702 file, I think that Version 3.  It has been installed on a disk provided by Microsoft after that old installation became corrupt (in the sense of Microsoft technical support.)  Before that, wireless network worked well.   (So unable to connect to the Internet for updates.)   Have tried to change the other settings and different messages acquired when it SHOWS that I am connected but cannot connect because of something to do with the certificate.  I don't remember what I did to try to solve this problem in the last days.

  I should add that I have tried the solutions of the previous forum on this topic, and none worked.

  Hi Marilynnla,

  Sorry to hear about the bad experience you encounter. Lets see if the network problem can somehow be archived.

  Read this article and follow the steps. Lets see if it helps in any way.

  How to troubleshoot wireless network connections in Windows XP Service Pack 2 (Works for Windows XP SP3 as well)

• Unable to connect to a wireless network - "the network card know driver or hardware related issues.

  Can someone help with the following problem please?

  I'm unable to connect to the wireless network.

  I have an Acer Aspire 5315 with an Atheros AR5007EG wireless adapter. This shows that "working properly" in the Device Manager. I tried to re - install the drivers for it constantly. They seem to everyone install ok but I still have the problem.

  The symptoms are...

  (1) if I try to set up a wireless connection, I get "unexpected error occurred". There is no useful looking for messages in the event viewer.

  (2) if I use "Diagnose and repair" I get "knows the network adapter driver or hardware related issues.

  I uninstalled everything which I think could be the cause of conflicts. I scanned for malware. I have run chkdsk and sfc. I have all the updates from Windows Update. I tried in Safe Mode with networking, but still get the same results.

  OS is Vista Home Basic 32-bit SP2.

  I would be grateful for any advice that might help solve this please.

  I have now re-installed Windows and everything works fine.  I still have no idea what caused the problem, or if it could have been set without a re - install.

  Thanks for the replies.

• Satellite C660-1NJ - unable to connect to the wireless network

  Hi guys

  I got a 1nj c660 and I have a wireless connection to a Fritzbox 7170.

  Now, this morning, everything was fine and I connected wonderfully, but now I can't connect no settings have been changed I just stop and start as usual. I used configfree and it shows the network but if I try to connect it says unable to connect to the network. I have Win7 home basic OS.

  I uninstalled the wireless network card and reinstalled, updated the drivers but nothing works, I still get the same error.

  Can someone help will appreciate it greatly!

  Hello

  Are you able to connect to open WLan?
  I mean you can try to disable security options in your Fritzbox and might test whether you are able to connect without the WEP, WPA or other safety standards.
  Of course, you should only done for testing purposes

  If this box works, then it means that the security of your router settings were not consistent with the settings of the Wlan card.

• Unable to connect to my wireless network

  I recently discovered that my wifi for vista would not connect to the internet even if the signal is 100% solid.

  My wireless House has a WEP encryption and it has already been saved on the laptop but since yesterday it ask me the WEP key when I try to connect it and wouldn't connect even if only the WEP pass has been entered correctly. The message that usually appears at the end is "windows is unable to connect, try the other network", even when I tried my companion's unsecured network.

  Here's what I did so far, but without success...

  I checked the Wireless driver from Device Manager and it works properly. I even try to update the driver and received a message that the driver is 2-update.

  Here's what I got when I tried to use "ipconfig/all".
  ..................................................
  Windows IP configuration

  Name of the host...: AZOU
  Primary Dns suffix...:
  Node... type: hybrid
  Active... IP routing: No.
  Active... proxy WINS: No.
  ... DNS suffix search list: Belkin

  Wireless network connection Wireless LAN adapter:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  Description...: Realtek RTL8187B Wireless 802. 11b / g 54Mbp
  s USB 2.0 network adapter
  Physical address.... : 00-22-5F-36-AE-19
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes

  Ethernet connection to the Local network card:

  The connection-specific DNS suffix. : Belkin
  Description...: Realtek RTL8102E Family PCI - E Fast Ethern
  and NIC (NDIS 6.0)
  Physical address.... : 00-1E-33-7A-3C-AE
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  Address IPv6 local link...: fe80::1ad:202c:5412:8070% 10 (Preferred)
  IPv4 address...: 192.168.2.35 (Preferred)
  ... Subnet mask: 255.255.255.0.
  Lease obtained...: May 2, 2009 19:58:15
  End of the lease...: June 9, 2145 03:09:10
  ... Default gateway. : 192.168.2.1.
  DHCP server...: 192.168.2.1.
  DNS servers...: 192.168.2.1.
  194.168.4.100
  194.168.8.100
  NetBIOS over TCP/IP...: enabled

  Card tunnel Local Area Connection * 6:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. : Belkin
  ... Description: isatap. Belkin
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  I can use the Ethernet cable to connect and this is killing me lol seriously... can anyone pls help me, I want to get this working wireless!

  Thank you

  Hello!

  What computer Toshiba laptop and OS do you have?

  In your case, I would check the Web from Toshiba site for an update of the BIOS:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Have you tried to reset the router? Unplug the AC adapter from the router, wait 5 or 10 minutes and then try again.
  Another laptop works on the router?

  Good bye

• HP Pavilion 15 laptop: Solved: unable to connect to my wireless network

  I have problems connecting to my wireless network. In available connections, my network is there with an x next to it. I can click on it and put my security key in, but it says unable to connect to the network. I've updated ready network cards. Any help would be greatly appreciated.

  Bobby

  Thank you for all your help. I'm back on now. I started having trouble a few weeks ago. My wifi connection would pass, and I have to disable and then re activate my network card back. This has been relatively shortly after my upgrade from Windows 10 but not immediately after. Then the other day which didn't work and I could not connect at all. I read somewhere to try to uninstall the network adapter and then restarting. It did not work. I also read to find updates for the network card and install those which, as mentioned by ichi730 as well. This no longer works. Then, I realized that I had not tried to restart the router after reading the post of WyreNut. It worked, thank you! I feel that it is a combination of the two pieces of advice that have worked so.

  Thank you all for your comments, it's much appreciated.

  Bobby

• Unable to connect to a wireless network

  I am able to connect to my workplace wireless, but not at my sisters House. The router is linksys and my f700 compaq wireless card is atheros. Network is detected and we know the wpa key. When I try to connect it says unable to connect to this network... Please help... Thank you...

  The situation you are in seems that this problem is only between lynksis router and laptop.

  Try changing from 6 to 11 wireless channel.

  Try to also replace wireless abg to bg or g only mode.

  All these changes can be made through the router so call him lynksis.

• Unable to connect to networks wireless on laptop Windows 7 Enterprise. Cannot start the autoconfiguration WLAN service. "Error 1068: the dependency service or group could start."

  original title: cannot start service autoconfiguration WLAN and EAP services

  I am not able to connect to my wireless network. When tried to connect, it shows just "unable to connect."

  I have the Intel WiFiLink 5100 adapter with the latest driver for Windows 7 Enterprise 32-bit installed. The laptop is not a wireless connection manager and I am trying to connect using the Windows wireless connection manager.

  I checked in the Services and found that service autoconfiguration WLAN and Extensible Authentication Protocol services are not running.

  When I tried to start the WLAN auto configuration service, I get the following error...
       Windows could not start the service WLAN autoconfiguration on Local computer.
       Error 1068: The dependency service or group could start.

  When I tried to start the service of Extensible Authentication Protocol, I get this error...
       Windows could not start the service on Local computer Extensible Authentication Protocol.
       Error 1053: The service did not demand launch or timely control.

  I found that all dependent services for the EAP are running. And all dependent services for autoconfiguration WLAN service are running except the EAP service.

  I searched the internet for the solution madly before posting here. Any help is greatly appreciated!

  Take a look at this > http://social.technet.microsoft.com/Forums/en/w7itpronetworking/thread/f9b835f2-c2da-43b9-883f-2b2a157c3921

  This link has the solution that worked for me.

• Satellite L300 - unable to connect to the wireless network

  I have a NETGEAR router and a Toshiba Satellite L300 laptop HP DV2000.

  The HP can connect to my wireless network and also my neighbors network next door (which is not secure)
  However, the L300 can only connect to the network of my nextdoor neighbour even if it can 'see' the NETGEAR network.

  I changed the security from WPA to WEP up to now no security at all, and it seems not to matter.
  The strange thing is that my L300 CAN connect to a wireless network, but not mine!

  And my wireless network works as I can connect from my HP laptop.
  On the L300 it shows 5 bars on the NETGEAR is not a problem of weak signal.

  Any help would be appreciated.

  Try changing the WLAN settings on your router. Compare the WLAN settings on the settings of your laptop and the router.

  Test it with standard B on both devices.
  I mean if your laptop can see neighbours WLAN card wireless network in the laptop must be OK.
  I really thing all is due to wrong WLAN settings.

  Play around with that sort of thing.

• Satellite M645-S4070 - unable to connect to the wireless network

  Hello. I have a Toshiba Satellite M645-S4070.

  Lately, I have no problem connecting to networks wireless in my office. Until this morning when I start my laptop, I can't connect to the internet more. I already use a recovery disk to check if I can solve the problem but nothing is. When it connects to the LAN it runs.

  Thank you.

  Hey,.

  The wireless network adapter is listed correctly in the Device Manager? It is maybe just disabled, and you can enable/disable using FN + F9 key combination.

  You should write more details not connection might mean everything, so first of all, that you should check if the wireless network adapter is recognized and activated correctly.

• HP ENVY 4520: Unable to connect to the wireless network

  My new printer is not connecting to my wireless network.  My router, it sees and accepts its letters of nobility, but then the printer is connected.  It will be displayed on my network for a second or two, but never stays there.

  I printed the "RESULTS of the WIRELESS NETWORK TEST" and he tells me that "the MAC address filtering can be activated on your wireless router that can prevent your HP printer to connect to your network without wire during installation.  MAC address filtering is disabled.

  I have connected many other features to my wireless network by pressing the WPS button and it begins to appear, but does not stick.  I also tried to manually enter the password without success (and the WPA key).

  Try to set up the printer with a static IP address that is not your router DHCP scope.

• HP Pavilion g series: unable to connect to the wireless epson printer

  I tried to reload the printing software on both cd and download from the epson site. Unfortunately, when happens to wireless setup, it fails to connect, and indicates that it has not installed software. I have connected to this printer before and my other laptop works very well. I just had to wipe the hard drive on the HP and am now in the process of re - install all software. Appreciate it is perhaps an epson problem and not a problem of HP

  @bbj1,

  Hello and thanks for the display on the HP support forums.  If the laptop you can connect to your wireless network, then it is not your laptop.  If not please post back with the full model and product number.

  Computers how can laptops HP - I find my model number or product number?

  If you can connect to your network wireless with your laptop then please contact Epson for supported by your printer.

  Thanks again for posting and have a great day.

• I'm unable to connect to the wireless network.

  replaced the card wireless and cant get driver for reinstall.

  Original title: replaced the card wireless and cant get driver for reinstall.  Help?

  Hello

  Please contact the Microsoft Community.

  You can't connect to the Internet.

  Please answer the question-

  (1) you are able to connect through the LAN cable?

  (2) what is the brand and model of the computer?

  (3) are you referring to the light on the computer or the router wireless?

  Method-

  I would have you look at the article-

  The problems of Internet connection

  http://Windows.Microsoft.com/en-in/Windows-Vista/troubleshoot-Internet-connection-problems

  Wireless and wired network problems
  http://Windows.Microsoft.com/en-in/Windows/network-connection-problem-help#network-problems=Windows-Vista&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1
   
  Do get back to us and let us know if you need more assistance. We will be happy to help you.
   
  Thank you.

• Unable to connect to the wireless network; Request to use the function keys and the keys on the keyboard

  * Original title: wireless connection problem

  I have an Inspiron computer (laptop).  I can't connect to my wireless Internet.  When troubleshooting it says use the buttons or the function keys on the front or side of the computer to turn on my wi - fi.  How to do that? How can I activate my wireless Internet connection?  Help, please!

  Hello

  Check with Dell support, their books online, the drivers/firmware, diagnostics and ask in their forums known issues.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/

  Dell PC Diagnostics
  http://www.Dell.com/support/Diagnostics/us/en/19/
  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">