Unable to connect to runescape - will connect elsewhere without problem

Similar Questions

• Purchase a new sealed copy of the upgrade of Windows Vista Edition diskette Home Premium. I found one on which the label says "for distribution in the United States / Canada only. Will this work without problems on a PC in the United Kingdom

  "U.S. / Canada Distribution only" disk for use in the United Kingdom?

  I want to buy a new copy sealed the Windows Vista Edition upgrade disk Home Premium. I found one on which the label says "for distribution in the United States / Canada only. Will this work without problems on a PC in the United Kingdom please? Thank you.

  Hello

  Yes, it will work. However I recommend to buy the disk to upgrade of the United Kingdom.

  The Windows Vista DVD upgrade that you get in the United Kingdom is different from what they get in the United States.

  Please follow the link menitoned.
  Choice of installation for consumer versions of Windows Vista (32-bit only)
  http://support.Microsoft.com/kb/932616
   
  I hope this helps.

• SOLVED: Computer laptop Windows 7 Home 64 bit has lost network connection (worked without problem for more than a year)

  I have laptop computer power and the router without effect recycled

  There is the same problem with the laptop turned off firewall.

  Connection failed even when using the ethernet cable.

  Can not ping router (return message is "General failure"), but can ping 127.0.0.1
  Router computer shows as connected and my other computer (Vista) sees the computer on a network card but cannot ping it.
  Last internet connection was August 28, Windows software was last updated was on 16 August.

  Hi Muzzy,

  The link to the winsock corruption was helpful - the symptoms were bad for my problem, but searching on the support site, I found these two similar problem reports (I did not find earlier because I had not looked for to Ping General Failure):

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-networking/my-laptop-cant-access-the-Internet/0abbae1f-E195-46EB-831b-3958d3cb6d30

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/ping-General-failure-to-Internet-intermittent-and/964e959b-ec91-43DC-a5ec-f97240050a4f

  I restarted my laptop in SafeMode with networking and the problem fixed itself - I guess there was a software conflict or an internal configuration had got out of sync.

  Thank you for taking the time to remedy to this - I would not have found the answer without you.

  Phil

• I could not update or install applications for weeks, so I disconnected my Apple ID and rebooted the phone but now I can't reconnect! The error is: unable to connect to the iTunes Store. I should w8 for ios10 and hope that it will be fixed by the new ios?

  I could not update or install applications for weeks, so I disconnected my Apple ID and rebooted the phone but now I can't reconnect! The error is: unable to connect to the iTunes Store. I should w8 for ios10 and hope that it will be fixed by the new ios? Cause don't want to reset my phone.

  You have tried: If you can not connect to the iTunes Store - Apple Support ?

  And I tried to do a soft-reset/reboot the phone?

• Unable to connect any device bluetooth on my windows vista, go to bluetooth devices but the drop down menu will not drop

  Original title: mouse bluetooyh
  Unable to connect any bluetooth devices on my computer windows vista, go to bluetooth devices but the drop down menu will not drop iam so unable to connect any bluetooth. any suggestions

  Hello

  read these tutorials on how to set up bluetooth

  http://www.vista4beginners.com/how-to-setup-a-Bluetooth-connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device

  Here are solutions to some common problems with Bluetooth devices.

  You can also try a convenience store for diagnose and fix common problems with equipment and devices running.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

  f the foregoing does not fix it contact the manufacturer of the device

• Unable to connect to the App Store since the upgrade to IOS 10

  Tried to restart App Store and phone. changed the password and recorded out and back in but still unable to connect. We will, get apps but when I try and download it keeps asking for the password and say that it can not connect. Someone at - it advice?

  Hello CT05,.

  Please ask for assistance with the App Store here in Apple Support communities. I understand how it is important to be able to download my new or existing applications on the App Store. Please try these things to see if we can get this to work for you as expected!

  The first thing we want to make sure is that all your data is safe. You can perform a backup to iCloud or iTunes. Use this article to help with this: backing up your iPhone, iPad, and iPod touch.

  Once you have your backup, please go to appleid.apple.com on your computer or via a web browser. Log in with the Apple ID you are trying to connect to the App Store with. If it connects, take note of the Apple ID and password. Try the same information on the iPhone.

  If this still does not work on the iPhone, please click Settings > Wi - Fi and turn Wi - Fi off. See if you can access the App Store on your cell data. If you can, it means that it some security on the wireless network that you are connected to that is blocking your connection. You won't be able to do this unless you use your cellular data or move you to a new wireless network.

  If you are not able to access the App Store on cellular or wireless data, please open this help article: If your iPhone, iPad or iPod touch connects to a Wi-Fi network. Check the section still not 'connect?' and look at the instructions to reset the network settings. What this does is actually reset some of your default network settings. You have to reenter your password to connect to wireless networks once this is done. Try again.

  Thanks again and have a great rest of your day.

• Tried all your suggestions and always receive "Unable to connect" when using ANY search engine.

  Can't use any search engine of FF 40.0.3 on Macbook Pro model with 10.8.5 OS 9.2. Receive "Unable to connect" message when you try to use a search engine. Other than the search engine and Mozilla Web sites to connect properly. 40.0.3 on another Mac FireFox works fine without any problems.

  In addition, I can not access the FF "Get modules" page or the home page of Mozilla. Search engines will connect not their home page or the search bar. Problem just started. I had previously been upgrade and have resorted, FF 40.0.3 without problem when it was issued. Solutions of attempts included refresh FF, launch FF in safe mode, run with all plugins disabled, graphics hardware acceleration disabled. None of these fixed the issue.

  Had already tried your suggestions, without success, but has once again to be sure. Without success. However, I made a further exploration of my own and found out that IPv6 is set to "Link Local" only in my router. I have reset on 'Automatic', the router reset to update, and my problem was solved. So it was the IPv6 setting (unlikely) or the router reset (probably) that solved the problem, or it is your suggestions I tried and did not work, COMBINED with the router reset which solved the problem (quite possible).

  Thanks for the comments!

• Suddenly 39.0 FF is "unable to connect" to any web page

  I use almost identical installations of 39.0 FF on both computers Windows 7 Pro. On computer 1, for the last two hours, I got "unable to connect" on each URL I tried. It can access things stored locally, such as troubleshooting information. FF on computer 2 is fine, and Chrome and IE work fine on computer 1.

  The problem started watching a movie on Netflix streaming on computer 1. The image suddenly froze and the speakers emitted a wicked repetitive noise - maybe it was 2 seconds of the movie soundtrack play again and again. Commands from the computer totally locked up. I kept only the noise of voltage with power button on the computer. I restarted the computer in safe mode, and then it restarted in normal mode. Now, everything on the computer seems fine - except Firefox.

  I tried to restart FF in safe mode; same problem in the corresponding mode. I saved copies of information for troubleshooting in safe and regular mode, and a copy of the submitted crash reports also list. I'll share these if you tell me how. (Can't do it with the button "Share data", of course, because I can't go to this form to ask a question on computer 1 - I am posting this to computer 2)

  The only thing I have not tried is "Refresh Firefox". I'd really rather not do that, because it will scan all my modules and customizations.

  Would appreciate any help you can offer.

  Start the computer in Mode safe mode with network support Windows (on the startup screen, press F8) as a test.

  • http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/

  ....
  You can check problems caused by malware.

  • https://support.Mozilla.org/KB/troubleshoot-Firefox-issues-caused-malware

  Make a check of malware with several malware scanning of programs on the Windows computer.
  Please scan with all programs, because each program detects a different malicious program.
  All of these programs have free versions.

  Make sure that you update each program to get the latest version of their databases before scanning.

  • Malwarebytes' Anti-Malware:
    http://www.Malwarebytes.org/MBAM.php
  • AdwCleaner:
    http://www.bleepingcomputer.com/download/adwcleaner/
    http://www.Softpedia.com/get/antivirus/removal-tools/AdwCleaner.shtml
  • SuperAntispyware:
    http://www.SUPERAntiSpyware.com/
  • Microsoft security scanner:
    http://www.Microsoft.com/security/scanner/en-us/default.aspx
  • Windows Defender:
    http://Windows.Microsoft.com/en-us/Windows/using-Defender
  • Spybot Search & Destroy:
    http://www.safer-networking.org/en/index.html
  • Kasperky free Security Scan:
    http://www.Kaspersky.com/security-scan

  Alternatively, you can write a check for an infection rootkit TDSSKiller.

  • Utility anti-rootkit TDSSKiller:
    http://support.Kaspersky.com/5350?El=88446

  See also:

  • "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

• Unable to connect to Apple ID after upgrade to ElCapitan 10.11.5

  I have the Macbook Air 11 "1.4 Ghz i5 with 4 GB 1600 MHz DDR3 (early 2014)

  I can't connect to the Apple ID (iCloud, Appstore...) after upgrade in ElCapitan 10.11.5

  About 3 weeks ago I improve my OS in ElCapitan as there was a signal of the Appstore upgrade.

  The download process and the installation was successful, but stuck on 'prepare your mac' session. It took about 2 hours, with cursor processing... Then I closed (push the power button on the keyboard) and turn.

  My Mac can work and in "about this Mac" already made it known that the OS is ElCapitan 10.11.5.

  But unfortunately, since then, I can't sign my Apple ID in the Mac (I use several apple 'iphone', 'ipad' products and my apple ID still works)

  

  I came to the nearby authorized Apple service, they don't have that one solution to re - install my Mac and I have to pay

  Maybe someone has a solution...

  Hi atiqurrakhman,

  From the information provided, it appears that you are unable to connect to your Apple ID for several services on your Mac from your update of OS X El Capitan 10.11.5. I know it's very important to have access to these services on your Mac, then I would be happy to provide assistance.

  Before you start, I recommend that you create a backup of your data using Time Machine. This website will provide more information:

  Use Time Machine to back up or restore your Mac - Apple Support

  Since the update seems stuck, it can not been installed properly on your system. The next step, I would recommend that you reinstall OS X from recovery using the steps here:

  How to reinstall OS X on your Mac - Apple Support

  Reinstall OS X from recovery

  If a recent Mac, you can use OS X Recovery to reinstall OS X.

  

  1. Turn on your Mac.
  2. As soon as you hear the startup tone, hold down the command and R on your keyboard.
  3. Release the buttons after the appearance of the Apple logo.
  4. If you are prompted, select a Wi - Fi network, or connect your Mac to the Internet via an Ethernet cable.
  5. After that the recovery menu will appear, select the option to install OS X.
  6. Follow the prompts on the screen to select your destination drive and install OS X.

  Once this process is complete, try to sign in with your Apple ID using multiple services to see if the problem has been resolved.

  Have a great rest of your day!

• Unable to connect to the Web site

  I can get www.calphalon.com to load but am unable to connect. When I created the account, calphalon did exactly the same thing ebay-t - it does not recognize the security code even if it is correct. I did exactly what I do on Ebay when I ask a question to a seller - I use Internet Explorer. You have created calphalon account no problem and am able to sign in and out of my account without any problem with IE, but when I switch back to FF (updated 22), this is a go. With FF, the sign of the popup box is much too small and is completely empty. When I go to the tab of the client service to register a product (this is why I am on the site), I filled up on the sign in info on the page and the kickoff, nothing happens. It's as if I never hit the Send button. It does not seem to convey anything at all. I have signed up for newsletters, but cannot access my account on ff so it seems I'm going w/IE when I get on this site.

  Hello

  Many issues of the site can be caused by corrupted cookies or cache. To try to solve these problems, the first step is to clear cookies and cache.
  Note: This will be you temporarily disconnect all sites, you're connected to.
  To clear the cache and cookies to do the following:

  1. Go to Firefox > history > clear recent history or (if no Firefox button is displayed) go to tools > clear recent history.
  2. Under "Time range to clear", select "all".
  3. Now, click the arrow next to details to toggle the active details list.
  4. In the list of details, see the Cache and Cookies and uncheck everything.
  5. Now click the clear now button.

  More information can be found in article to clear your cache, history, and other personal information in Firefox .

  This solve your problems? Please report to us!

  Thank you.

• Version 20.01 is "Unable to connect" while the previous Version 19.02 works great!

  My work computer which runs Windows XP Pro with Service pack 3 and beyond has been upgrade FF worm. 20.01 this afternoon and is "unable to connect". It worked very well on the version previous minutes before it has been updated! Nothing has changed in my network connections and my firewall settings! I'm writing this on a Windows 7 computer that is currently running FF worm. 20.02 that works well! I have another Windows XP Pro computer that is currently running FF Ver, 19.02 and there is a "Software Update" window on the screen asking me to update this computer to 20.01 worm. FF. I clicked on "Ask later" in fear that it will have the same problem "unable to connect"! Help!

  It is possible that your security (firewall, antivirus) software blocks or limit Firefox or the process of plugin-container without you inform, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox and the plugin-container in the permissions list in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.org/KB/server+not+found
  • https://support.Mozilla.org/KB/firewalls

• problem with WiFi connectivity with new Ipad Pro.  Unable to connect to the wifi at home.  My other devices (mini mac, iphone, iPad 2) all work fine on my wifi at home.  I am able to connect Ipad Pro wifi work.

  Problem with WiFi connectivity with new Ipad Pro.  Unable to connect to the wifi at home.  My other devices (mini mac, iphone, iPad 2) all work fine on my wifi at home.  I am able to connect Ipad Pro wifi work.

  On the Pro iPad, tap settings > general > reset > reset network settings

  You will need to re enter your Wi - Fi password.

  Then try to connect to your Wi - Fi network.

  If this does not help, more available in this support article suggestions > If your iPhone, iPad or iPod touch connects to a Wi-Fi network

• Error: unable to connect to the server 'Err_connection_refused '.

  Dear friends!

  I use a macbook pro (mid-2012 model year) updated with OS X 10.11.4.

  Recently, I am unable to connect to most of the Web sites in nearly all browsers (firefox, google chrome, safari). I am able to open gmail, sites of apple and google start page.

  Error message in chrome like "Err_connection_refused".

  Error in Safari, as "Safari can't connect to the server.

  I tried to delete the browser cache, cookies and even re-installed browsers. But it helps did ' t.

  I tried to delete the WiFi under preferences and recreated. Still problem persists.

  I am able to display all Web sites in my windows laptop and mobile phones connected to the same WiFi at home.

  Above the problem came recently for 1 week. Please suggest a solution.

  Kind regards

  BALAJI K

  You may have installed one or more variants of the malware "VSearch' ad-injection. Please back up all data, and then take the steps below to disable it.

  Do not use any type of product, "anti-virus" or "anti-malware" on a Mac. It is never necessary for her, and relying on it for protection makes you more vulnerable to attacks, not less.

  Malware is constantly evolving to work around defenses against it. This procedure works now, I know. It will not work in the future. Anyone finding this comment a couple of days or more after it was published should look for a more recent discussion, or start a new one.

  VSearch malware tries to hide by varying names of the files it installs. To remove it, you must first identify the naming model.

  1 triple - click on the line below on this page to select, then copy the text to the Clipboard by pressing Control-C key combination:

  /Library/LaunchDaemons

  In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

  A folder named "LaunchDaemons" can open. If this is the case, press the combination of keys command-2 to select the display of the list, if it is not already selected.

  There should be a column in the update Finder window. Click this title two times to sort the content by date with the most recent at the top. Please don't skip this step. The files that belong to an instance of VSearch will have the same date of change within about a minute, so they will be grouped together when you sort the folder this way, which makes them easy to identify.

  Search in the folder with the name of all these forms:

  com.something.daemon.plist

  com.something.Helper.plist

  com.something .net - preferences.plist

  Here, something is a string, which may be different in each instance of VSearch random meaningless. So far it has always been an alphanumeric string without punctuation signs, such as "disbalance" or "thunderbearer."

  You may have more than one copy of the malware, with different values of something.

  There may be one or more files with the name of this form:

  com.somethingelseUpd.plist

  where George can be an empty string of sense that something different. Yet once, there may be more than one file of this type, with different values of Gisele.

  Here is a typical example of an infection VSearch:

  com.disbalance .net - preferences.plist

  com.thunderbearerUpd.plist

  You will have files with similar names, but probably not identical to these.

  If you feel confident that you have identified the files above, drag only the files - nothing - to the trash. You may be prompted for administrator login password. Close the Finder window.

  2. open this folder as in step 1:

  /Library/LaunchAgents

  Move to the trash all the files with the name of the form

  com.something.agent.plist

  where something is one of the strings that you found in step 1. There may be not all of these files.

  3. If you have whatever it is moved to the trash in step 1 and step 2, restart the computer and empty the trash.

  Do not remove the folder 'LaunchAgents' or "LaunchDaemons", or anything else inside of one or the other, unless you know you have another type of unwanted software and more VSearch. Records are a normal part of Mac OS X. The terms "agent" and "demon" is a reference to a program that starts automatically. This is not inherently bad, but the mechanism is sometimes exploited by hackers for malicious software.

  4 reset the home page in each of your browsers, if it has been modified. In Safari, first load the desired home page, then select

  ▹ Safari preferences... ▹ General

  and click on

  Set on the current Page

  The malware is now permanently inactivated, as long as you reinstall it never. A few small files will be left behind, but they have no effect, and trying to find all them is more trouble that it's worth.

  5. If you do not find the files or you are not sure about the identification, after what you have found.

  If in doubt, or if you have no backups, change nothing at all.

  6. the penalty may have started when you have downloaded and run an application called 'MPlayerX' or "PDF Pronto." If there is an element with a name in the Applications folder, delete it.

  This Trojan horse is often found on the illegal Web sites that traffic in content such as movies pirated. If you, or anyone else who uses the computer, visit these Web sites and follow the instructions to install the software, you can expect more of the same and worse, to follow. Never install software that you downloaded from a bittorrent, or which has been downloaded by someone else from an unknown source.

  In the aspect of security & confidentiality of system preferences, select the general tab. The marked anywhere radio button should not be selected. If this is the case, click the lock icon to unlock the settings, and then select an other keys. After that, do not ignore a warning that you are about to run or install an application from an unknown Director.

  Then, still in system preferences, open the pane of the App Store or software update and check the box marked

  Install the system data files and security updates (OS X 10.10 or later version)

  or

  Automatically download the updates (OS X 10.9 or earlier version)

  If it is not already done.

• HP photosmart 7525: hp 7525 unable to connect to web services

  I recently bought an Imac, and now I can't get my hp 7525 to analyze correctly. It says unable to connect to web services. I tried to uninstall wirless and re-login.  Help, please!

  Hello

  My apologies for jumping.

  To add more, the latest firmware MUST be installed to maintain connectivity of the web services.

  Click on the configuration icon and select Tools, then print a printer status report.

  Locate the firmware listed, if it is a value lower than ELM1CN1607AR (see "BOLD" kinds) you will be required to update the firmware.

  Unfortunately, a Mac OS firmware update utility is not currently available, so you must use a Windows PC to update the printer:

  http://support.HP.com/us-en/drivers/selfservice/swdetails/HP-Photosmart-7520-e-all-in-one-printer-series/5199461/model/5286642/swItemId/OJ-113641-5

  Once obtained the latest firmware, try to use Web Services again and check for the difference.

  Kind regards

  Shlomi

• At the opening of some Web pages I get a msg 'unable to connect to the server', but it works very well in startup

  The last few days during the use of the internet, some Web pages will not be not open. I get a msg of error saying 'unable to connect to the server', but it works very well with other sites such as Facebook and YouTube.  This happens when I use Safari, Firefox and Chrome.  Yet if I'm in Safe Boot mode it works fine.  I exaggerate the App installed VPN and when I am in normal mode and connect to the VPN exaggeration, all Web pages work correctly. I searched the net for days trying to find a solution but nothing I tried worked.  I'm not very computer savvy either so don't know much of what I do with this technical stuff.  I emptied the caches, but that did not work.  Following the advice of an answer to another question on this forum that was similar to mine, I went into the Terminal and performed a diagnostic test.  I don't understand all the information in this essay so hope someone here can decipher. The report is quite long, but this is the beginning of the pasted below.  Help, please!

  The system version: OS X 10.11.1 (B 15, 42)

  Kernel version: Darwin 15.0.0

  Boot Mode: Normal

  Model: MacBookPro11, 1

  FileVault: on

  The System Diagnostics

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  Diagnosis of the user

  2016-04-12 AssetCacheLocatorService crash

  Accident of GarageBand 2016-04-12

  Kernel messages

  Apr 12 15:34:15 AssertMacros: tmpData (value: 0x0), leader: /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleCredentialManager/AppleCre dentialManager-82.10.1/AppleCredentialManager/AppleCredentialManager.cpp, line: 765

  Apr 12 15:34:15 init: error getting of PHY_MODE; using MODE_UNKNOWN

  Apr 12 15:34:18 NTFS-fs warning (device/dev/disk0s4, pid 165): ntfs_system_inodes_get(): Windows is put into hibernation. Will not be able to get back on read-write. Run the chkdsk command.

  Apr 12 15:35:41 deal with iCoreService [94] taken causing excessive Awakenings. Awakenings (per second) rate: 520; Maximum rate (per second) Awakenings: 150; Observation period: 300 seconds; Life of the Awakenings of task number: 45019

  Apr 12 16:45:59, launchd process [1]-l' system of limitation of disabling i/o level

  Apr 12 16:45:59, launchd process [1] disable the CPU - the system-wide limit

  Apr 12 16:46:31 AssertMacros: tmpData (value: 0x0), leader: /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleCredentialManager/AppleCre dentialManager-82.10.1/AppleCredentialManager/AppleCredentialManager.cpp, line: 765

  Apr 12 16:46:31 init: error getting of PHY_MODE; using MODE_UNKNOWN

  Apr 12 16:46:33 NTFS-fs warning (device/dev/disk0s4, pid 155): ntfs_system_inodes_get(): Windows is put into hibernation. Will not be able to get back on read-write. Run the chkdsk command.

  Apr 12 16:47:52 iCoreService process [94] taken causing excessive Awakenings. Awakenings (per second) rate: 557; Maximum rate (per second) Awakenings: 150; Observation period: 300 seconds; Life of the Awakenings of task number: 45052

  12 apr 17:20:51 0xe00002db questioned the file opening error

  -the last message repeated 1 time.

  Apr 12 19:39:26 AssertMacros: tmpData (value: 0x0), leader: /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleCredentialManager/AppleCre dentialManager-82.10.1/AppleCredentialManager/AppleCredentialManager.cpp, line: 765

  Apr 12 19:39:26 init: error getting of PHY_MODE; using MODE_UNKNOWN

  Apr 12 19:39:28 NTFS-fs warning (device/dev/disk0s4, pid 158): ntfs_system_inodes_get(): Windows is put into hibernation. Will not be able to get back on read-write. Run the chkdsk command.

  Apr 12 19:40:49 deal with iCoreService [94] taken causing excessive Awakenings. Awakenings (per second) rate: 545; Maximum rate (per second) Awakenings: 150; Observation period: 300 seconds; Life of the Awakenings of task number: 45066

  Apr 12 20:46:58 launchd process [1]-l' system of limitation of disabling i/o level

  Apr 12 20:46:58 launchd process [1] disable the CPU - the system-wide limit

  Apr 12 20:47:21 AssertMacros: tmpData (value: 0x0), leader: /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleCredentialManager/AppleCre dentialManager-82.10.1/AppleCredentialManager/AppleCredentialManager.cpp, line: 765

  Apr 12 20:47:21 init: error getting of PHY_MODE; using MODE_UNKNOWN

  Apr 12 20:47:23 NTFS-fs warning (device/dev/disk0s4, pid 157): ntfs_system_inodes_get(): Windows is put into hibernation. Will not be able to get back on read-write. Run the chkdsk command.

  Apr 12 20:48:44 deal with iCoreService [94] taken causing excessive Awakenings. Awakenings (per second) rate: 545; Maximum rate (per second) Awakenings: 150; Observation period: 300 seconds; Life of the Awakenings of task number: 45476

  Apr 12 21:54:58 opening error 0xe00002db questioned the file

  -the last message repeated 3 times.

  Apr 13 01:42:49 deal with com.apple.WebKit [12265] wire 546051 caught fire CPU! He used more than 50% of the CPU (actual recent use: 93%) more than 180 seconds. Screw using the processor to life 90,030145 seconds, (89.468979, System 0.561166 user) information book: balance: 90000757669 credit: debit 90000757669: limit 0: 90000000000 period (50%): 180000000000 time since last filling (ns): 96164617988

  Hi AussieEgypt,

  Thank you for using communities Support from Apple.

  If a problem does not occur when it is started in safe mode, then you have already determined that the problem was isolated to a few 3rd party software running on your Mac.  Take a look at the information below to start with the removal of some elements of start-up and connection and see if the problem persists:

  Test your login items

  1. Choose the Apple menu > System Preferences, and then click users and groups.

  2. Click on your account under the current user name, and then click connection points.

     Make a list of the login items, you will need to remember later.

  3. Select all the elements of connection, and then click the button Delete .

  4. Choose the Apple menu > restart.

  5. If this solves the problem, reopen the preferences users and groups, add the elements of connection one at a time and restart your Mac after the addition of each of them.

     If the problem persists, follow the steps above to remove only the last element of connection that you added.

  OS X El Capitan: If you think you have incompatible connection points

  See you soon.