Unable to connect to surface RT in network neighborhood

Similar Questions

• Satellite Pro 6100: unable to connect to internet via wireless network

  Have had some problems with the audio device Yamaha for another thread, which now seems to be resolved. Thank you!

  However, do not know why, but now unable to connect to the internet via a wireless network, although the router works well as another computer in the House is connected wireless.

  When you check the available wireless networks it comes up with "no wireless networks were found in range, make sure that your computer's wireless switch is on.
  Where to check it, can anyone help?

  Thank you

  On the left side, there is WLAN switch. Make sure that the switch is in on IT. After doing this using FN + F8 key combination and activate WLAN device.

  After having done that, you should be able to see the WLAN networks available in your area.

• DeskJet 3070 unable to connect to the ad hoc network

  Hello

  I'll put up my new HP Deskjet 3070. This printer has wireless capability. I would use it wireless with my laptop Macbook Pro (OSX 10.6.8).

  I don't have a wifi network or router at home. That's why I created a wifi (one to one) on my mobile ad - hoc network, named MyPrinterNetwork. This is the type of network used to connect a computer to the other on wifi. MyPrinterNetwork is then visible to other devices compatible wifi (other computers, smartphone,...), and devices can connect to the network (and share files or Internet by wifi). This thread http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/Connect-Deskjet-3070A-wirelessly-to-my... suggests that this printer is able to connect to ad hoc networks.

  I then launch the HP utility to configure the printer. But when the screen appears with the list of available wifi networks, MyPrinterNetwork is not in the list. The list contains only the other wifi available through networks points (values in wifi mode column are all infrastructure) access. If I try to enter the name of a network manually, the software indicates that the printer cannot see or connect to this network.

  Executive Summary:

  -Someone would confirm that the printer Deskjet 3070 is able to connect to the ad-hoc wifi networks?

  -If so, why my adhoc network isn't in the list in the configuration utility?

  Thanks and greetings

  Johnny

  Hello Johnny.

  Deskjet 3070 Network Infrastructure support only, it does not support the ad-hoc connection.

  As you can find in the user manual:

  Traditional wireless connection (requires router)
  
  To connect the HP All-in-One to an integrated wireless WLAN 802.11 network, you will need the following:
  
  - A wireless 802.11b/g/n network that includes a wireless router or access point.
  NOTE: 802.11n will only support 2.4Ghz
  
   A desktop computer or laptop with either wireless networking support, or a network interface card (NIC). The computer must be connected to the wireless network that you intend to install the HP All-in-One on. 
  
  Page 33:http://h10032.www1.hp.com/ctg/Manual/c02887357.pdf
  

  As an alternative, try feature that allows the mac to act as a router in Mac OS X internet sharing Infrastructure mode:

  http://docs.info.Apple.com/article.html?path=Mac/10.7/en/mchlp1540.html

  A limitation, you should be aware, the Internet sharing security supports WEP in shared only authentication mode that is not supported by the printer you can find below:

  http://support.HP.com/us-en/document/c02871178

  Therefore, you should keep sharing without security password in order to connect the printer to the network.

  It will be useful,

  Shlomi

• Portege Z30 - A - unable to connect to the GSM mobile network.

  Toshiba Portege Z30 - A Windows 7 Prof

  When I try to connect to a modem GSM receives the error:
  "Network connection based on a mobile broadband connection failed with the error code: 1.

  (GSM card works properly in other devices)

  Hello

  According to the Microsoft Knowledge base, the error code 1 means that the device is not configured correctly.
  One of the reasons why the device isn't configured correctly might be missing a driver or the driver / software are configured incorrectly.

  Recommend you to check the configuration.

• Satellite A300 - unable to connect to a local wireless network

  Hello

  I have a question: bought a laptop two days ago, the wireless LAN doesn't work. It can detect the network, accepts the network key, he just used to connect.

  Help, please.

  Hello!

  Have you checked the TCP/IP of the WLAN card settings?
  I put t know the network configuration of the router, but if you are using DHCP you must use this mode or you set a static IP address.
  Check it!

  Also, check if your wireless network card is recognized correctly in Device Manager and try to reset your router. This means that you must remove the router AC adapter and wait 5 minutes. Then plug the AC/DC adapter again.
  Sometimes a firmware update might be useful too.

  Good bye

• Satellite Pro L40 PSL43E: Unable to connect to wireless local area network

  Hello to everyone who reads,

  I've had this laptop for about 12 months and a few days ago while trying to connect to the internet, she advised that I was not connected to my router.

  I have another laptop, it connects well with wireless and it connects fine using the ethernet cable but wireless!
  Especially, when I switch the radio power on/off using the small switch on the front the same symbol rises (the cell phone, red circle with a red slash through it, then the sign of the internet!)

  I tried the update of the driver for the Atheros AR5007EG Wireless Network wireless adapt and not much happened!

  I'm not in portable computers in a big way so any advise given better would become simple?
  I saw some stuff about the removal of the cards and other things? but I don't know where to start!

  Is it a common thing with these laptops?
  Need help please, I desperately need my laptop wireless.

  Thanks a lot to all in advance

  Paul

  Hello Paul

  Make sure that the wireless network adapter is correctly enabled.
  After putting using WLAN switch using FN + F8 key combination and make sure the wireless network adapter is enabled.

• Unable to connect to a specific wireless network

  I'm currently sitting in a café, connected to their wifi WPA2 with my MacBook.

  I can not connect to the same network with my iPhone 4S. It just do not see it--other networks, Yes, but not the coffee. I tried to reset the iPhone; the other networks still appear, but not the one I want to join. I tried to connect manually several times with 'other '.... ', using my MacBook to check SSID and password of the wifi, but the iPhone says that it cannot find the network let alone accede.

  It's a signal very strong: the wifi bars are entirely black in the menu bar of my MacBook. My iPhone can see half a dozen other wifi networks, including those where the router is not as tight as one that I am trying to connect. I can not not connect to others: either they are password protected, or require a customer relationship or are not worthy of trust.

  What is going on?

  Just to add: I know that the standard Apple FAQ on connectivity issues iOS wifi; they are not a help here.

• Unable to connect the computer to the network

  original title: networking issues

  According to me, only missing me something very simple. I have 5 computers connected between them and all, but we can speak with others. 3 computers running Win XP and Win 7-2. Bart is running Win XP and is connected by wire to a router, and can talk to the other 4 computers. Lisa is running Win 7 and is connected by wire to a router, and can talk to all computers but Bart. Maggie is running Win XP and is connected to a hub that is connected to the router. Maggie can talk to all the computers, but Bart. Homer is running Win XP and is connected to a hub that is connected to the router. Homer can speak to all computers but Bart. Margin is running Win 7 and is connected to a hub that is connected to the router. Margin can also talk about all the computers, but Bart. I do not understand why I can use Bart to access other computers, but the other computers cannot access to Bart. I know it's probably something simple I'm missing. All the computers are on the same workgroup as well. I used the Network Setup Wizard to configure the computers, so I think everything is the same. I have also two printers connected as well. One is connected to Bart via USB and the other printer is connected to the hub. Everyone can print to one that is connected to the hub. But of course only Bart can print on those connected to it.

  Anyone have ideas of what I'm missing.

  Thanks in advance.

  This is almost certainly due to one of two things.

  First, a firewall on Bart can block incoming connections.  Bart can contact other computers because outgoing requests and incoming responses are allowed through, but Bart unsolicited inbound connections are rejected.  A couple of tests, you can run the following:
  Find the address IP of Bart (assuming it's here on 192.168.1.100)
  Bart ping try another machine (start-> Run-> "cmd") and then enter the command:
  ping 192.168.1.100
  Try a 'ping NetBT' Bart from another machine (the same above commands prompt window enter the command :)
  nbtstat-a 192.168.1.100 (note this must be an uppercase 'A' in '-A')
  Both should give you an answer.  See if either get an answer.
  If you are using Windows Firewall, go to-> Windows Firewall Control Panel, click the 'Exceptions' tab and check that there is a tick next to "file sharing and printers."  In the 'Général' tab, verify that there is NOT a check next to "do not allow exceptions.  If you have other firewall products on your computer, you are yourself here.

  Second, the "Workstation" of Bart service may work OK, but its 'Server' service may not be installed / started.  (The workstation service to Bart communicate with other machines, Server service allows other machines contact Bart).  To check this, bring up the Service window (start-> Run-> "services.msc").  You should see a line marked "Server."  Its status should be "started" and its Startup Type should be "automatic".  Otherwise, as administrator, double-click top and doing it this way.

  HTH,
  JW

• Unable to connect new devices to the network

  I have a WRT610N which does not allow me to connect all devices to the wireless network. He is a recent problem I was able to connect new devices before. Devices on the wireless network, those who have been on the network are able to disconnect and reconnect. That new devices are excluded. Went through the admin screens to see if something is wrong, but can't find anything. Any suggestions?

  Disable wireless security all the and try to connect with any temporarily.  Make sure that the MAC address filtering is DISABLED.  If you can connect now to go back and add the security on.

• Unable to connect to the ad hoc network created in windows vista

  Hello

  I created an ad hoc network on the laptop to my sister that is running windows Vista Home Basic Edition x 86.
  I installed ubuntu 11.04 alongside windows 7 on my laptop. I can find the network under ubuntu, but I can't connect to it.
  Can someone help me with this please?

  Hello

  Method 1:
  You can networks troubleshooting wireless with Ubuntu and check:
  https://help.Ubuntu.com/community/WifiDocs/WirelessTroubleShootingGuide

  Method 2:
  If you have problems with Windows networks and then check out the link
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• Unable to connect to ground or wireless network

  I can't connect to my land or wireless network.  I tried to connect through my laptop to work and land / wireless worked as expected (e.g. problem is not with the router).  Previously, I was able to connect to the network via my computer at home.  Some information:

  1. I get the following message when I consult my network connections:

  "Connection status: unknown.

  The dependency service or group was able to start. »

  2 Windows cannot find any wireless networks in range.

  3. I tried to use Windows Network Diagnostics and the message I got was "The Windows Wireless Service is not running on this computer."  I tried to start the service, but couldn't.

  I would appreciate any you can give troubleshooting tips!  Thank you.

  Hi Kelly1986,

  1. what happens when you try to connect by using wired connection?
  2. do you have security software installed on the computer?
  3. did you of recent changes on the computer?
  4. What is the error message when the service started?

  First of all, I would say that check you what happens when you connect using the wired connection.

  Check also in mode safe mode with Networking if you are able to connect to internet using wired connection.

  Steps to start in safe mode with networking
  1 restart your computer if it is running.
  2. press the F8 key after your initially on powers computer.
  3. Once you see the menu Advanced Startup Options , you can stop tapping.
  4. use the up/down arrow keys to highlight your selection.
  5. Select Safe Mode with network and pressenter.
  6. you should see loading drivers and wait please.
  7. you should then be at the Welcome screen.
  8. connect to your computer using an account with administrator privileges.

  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Restart the computer to return to normal mode

  Disable the security software on the computer and try to start the service and check.

  Important: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  If you still cannot start the try running SFC scan service that would have a search system files corrupted on the computer and replace them.

  For more information please visit the link below.
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  Solve problems, find wireless networks
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks

  The problems of Internet connection
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  Go back with the results!

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• ENVY 4500: Unable to connect to my 802.11n network.

  I have an Apple airport base station, set at 2.4 GHz.

  When it is set to use "802.11n (802.» 11 b/g compatible)"the printer connects without a problem.

  Airport report it the connection as 'PHY b/g mode.

  But I prefer to use "802.11n only. When I do, the printer will not connect to the network.

  Network test results indicate parameters - no. filtering FAIL. but the airport has no MAC filtering.

  The Printer Setup Wizard indicates my 802.11n network only, but does not connect to it.

  The specification, the printer is 802.11 b/g/n.

  How to connect to 802.11n only

  I solved this by logging in to the Web interface of the printer via the USB port and change the interface 802.11, an advanced option.

  Uncheck the box "in use of 802.11 network infrastructure using the behavior of b/g.

  

• Unable to connect to other Windows 7 network devices - 0 x 80070035 and 0X80004005 error codes

  I have a network consisting of Windows 7 laptop computers, an XP laptop and a Wireless Linksys (Cisco) WRT610 N + N with storage attached to it via its USB port.  Your PC Windows 7 has, since I can see and access to other computers and devices on storage.  Since Windows PC B I can not connect (via the file manager) to A PC or NAS storage network.  Get such as 0 x 80070035 and 0X80004005 error codes when you try to connect to the IP address on the device name.  When I ping the devices of PC B I have no trouble to achieve.

  I turned off all firewalls, added the LMHOST file entries and a myriad of other tests and still cannot connect to PC B devices.  I can surf the net fine and do everything else - simply cannot connect to other devices even if these other devices can connect to me.

  I was in there for 22 years and has worked as an engineer on major networks and the network I stem - anyone got any idead. I checked all the basics such as Netbios, file sharing etc etc.

  Here is the Vista Forums.

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  Here is the Vista Forums.

  See you soon

  Mick Murphy - Microsoft partner

• Unable to connect to the internet, no network adapter icon?

  I received a computer toshiba satellite laptop which should have windows 7 ultimate on, however it does not connect to the internet wireless or ethernet, I lived all the troubleshooting suggestions, but there is no network adapter icon to activate. The laptop was of an elderly aunt who barely used and was not very tech savvy so I don't think that its been damaged (it has not been used for some time) any help would be greatly appreciated.

  Are there devices listed as "other"?

  If there is, run as 'Administrator' Device Manager and do a right click, properties, [pilot tab] and try to "roll back driver" (I guess the update driver will not work if the PC is not connected to the internet, but it can also be worth a try)

  If this does not work, try to force the hardware detection - http://www.pctips3000.com/how-to-scan-windows-7-computer-for-newly-attached-hardware/

  If still no joy, use another PC to go to the support site for the brand/model PC and download the latest driver available for your PC and the operating system network card (32/64 bit, etc.) and transfer it to the PC via a USB or SD card. Then try to install it.

  BIOS - how you access the BIOS will depend on the brand / model of the PC and the BIOS itself, but it gives an example: http://pcsupport.about.com/od/fixtheproblem/ht/accessbios.htm give it a read and see if you can follow. Ensure that you change and not change things randomly.

• Unable to connect to applications using a network

  Victorinox original title: network Ethernet NIC network adapter wireless network device

  in a particular network m not able to connect apps (that runs without a browser) to the network. It goes very well in the browser. This problem goes away if I use another network.

  Hello Agam,

  1. What are the applications that does not connect to the network?

  2. do you get an error message when you connect to the network?

  3. do you use a Wi - Fi Hotspot?

  Perform the steps from the link below and see if it helps.

  Turn Windows Firewall on or off (Windows 7)

  Warning: Firewallsoftware can help protect your computer against viruses and other security threats. In most cases, you should not disable your firewall software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your firewall software is disabled, your computer is vulnerable to attacks.

  Answer please if you have any questions.