ENVY 4500: Unable to connect to my 802.11n network.

Similar Questions

• Satellite L670 - unable to connect to my 802.11n WLAN router

  Hello

  I have a new Satellite L670 with Windows 7 Home Premium. With this laptop I can connect to my network 802.11 g WLAN. Everything works very well. Now I wanted to connect to my 802.11n wlan (router: linksys wrt610n) but it does not work. Laptop can't see the network (ssid) and it does not work if I entered the ssid manually too. The network works with my mac mini perfectly if it is not a failure of the 802.11n.

  I have updated all drivers from the laptop, all the updates that are installed under windows and I tested the driver broadcom broadcom itself (once the driver from toshiba Web site and the other driver from broadcom site) but nothing works. Laptop can't see the ssid and a manual configuration do not work too.

  Can someone help me pls?

  Post edited by: Artanis666

  Post edited by: Artanis666

  Hello

  What Satellite L675 you exactly and what WLAN card there?

  On the Web from Toshiba site, I saw some L675 models they support project t N n

• Problem connecting to 802.11n networks on Vista or Windows 7

  Hello

  Under both Vista business and Windows 7 Enterprise, I can connect to an 802.11n network only if the computer has not slept or hibernated. If the computer is asleep or in hibernation, I can connect is a 802.11n network until I restart. However, I can still access the 802. 11b / g fine after sleeping.

  Is this a problem driver or a matter of Intel 5100 AGN.

  One of them was to disable "Energy savings" in Manager device for the card, but that seems to make the system from time to time wants a blue screen.

  Not sure if it's a hardware problem, driver problem Intel or a Windows problem. Maybe someone could put a good solution, the version of the driver or the hotfix.

  Updates Microsoft or updates to Lenovo Power that came out last week corrected it. I had no need of updates to Intel.

• HP Pavilion dv6t-7000: Ralink RT5390R wireless adapter does not connect to 802.11n network

  I have a HP Pavilion dv6t-7000, equipped with the Ralink RT5390R wireless adapter.  For the life of me, I can't get it to connect to my home network when implemented as 802.11n.  They connect other devices. If I change my router 802.11 g, but no other change, doe HP connect. But if I return the router to 802.11n, HP sees the network, and it correctly identifies as a 802.11n network, but does not connect.

  The router is a D - Link DIR-615 (N300 2.4 ghz)

  All this experience? All solutions?

  Woo-Hoo.

  Found a solution.  Both HP and windows said I had the most current drivers, but this HP forum had a link to a newer driver.  Installed and it worked.

  http://h30434.www3.HP.com/T5/wireless-Internet-home-networking/Wi-Fi-problems-HP-Pavilion-G7-1338dx-notebook-PC/m-p/1836467#M33729

• Broadcom 802.11n network adapter does not work

  Hello

  I am trying to connect to the internet via Wi - Fi.  After the installation of windows on a HP Mini 8 older - I get an error message that the Broadcom 802.11n network adapter problems.   I checked for updated on the HP website and Broadcom drivers and were able to find the answers.  Any ideas?

  Hi Ronjon17.

  I'm glad to know that you've posted on the forums of Windows 8.

  From your description, you are unable to connect to the internet via Wi - Fi.

  Could you please answer the following questions so that we can help you in a way better?

  1. What is the model number of your laptop?

  2. What is the number of brand and model of your network card?

  3. are you able to connect to the internet using a wired connection?

  4 pease check updates about the network card.

  Here are a few methods you can try to solve the problem.

  Method 1: Open the network adapter Troubleshooter by sliding into the right edge of the screen, quilting Search (or if you use a mouse, pointing to the top right of the screen, move the mouse down and then clicking Search), enter Troubleshooting in the search box, typing or clicking on settings then tapping or clicking the Troubleshooting. Press or click network and Internetand then press or click on the network card.

  See also this link.

  http://Windows.Microsoft.com/en-us/Windows-8/fix-network-adapter-problems

  Method 2.

  To open the troubleshooter for Internet connections

  If you cannot connect to the Internet or access a particular Web site, it could be a problem with your Internet connection. Try to use the of Internet connections Troubleshooter to fix the problem.

  ·         Open the troubleshooter of Internet connections by hitting on any fly in the Dashboard screen, quilting Search (or if you use a mouse, pointing to the top right of the screen, move the pointer of the mouse down and then clicking Search), entering the troubleshooting in the search box, type, or by clicking on settingsand then by typing or clicking the Troubleshooting. Press or click network and Internetand then press or click Internet Connections.

    See also this link.

  http://Windows.Microsoft.com/en-us/Windows-8/cant-connect-to-a-network

  Also check the information in the device status of network card in Device Manager, please follow this link.

  http://Windows.Microsoft.com/en-us/Windows/Web-networking-help#V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1&Web-networking-help=Windows-8

  Hope the above information helps. Please get back to us if the problem is not resolved.

• HP Pavillion 500PC series - lack of Broadcom 802.11n network adapter

  Hello

  I'm a newbie on this forum. I have gotHP Pavilion 500PC series, Windows 8 operating system, SN [personal information deleted]
  . There's a probem with low internet connection. Apparently, they say that the broadcom 802.11n network adapter is missing or damaged. Could you please help me solve this problem? Thank you.

  Kind Regads,

  Ririn

  Hi semarang

  Thank you for visiting the Forums from HP Support. I'm sorry to inform you that your message needs some changes to remove personal information. Our Participation rules:
  
  Protect privacy - yours and others. Do not share something about yourself that you do not want to see on a billboard on the road. Do not post contact or other personal information - your own or someone of another--or of any content that you receive in communications one without the consent of the author. For example, do not post your n ° of series or publicly coordinated computer and not let someone you don't know to take control of your computer remotely.
  
  If you need people to contact you directly, or ask them to send you a private message, or subscribe to the discussion then you will be notified when there are replies. You can also click on your name anywhere in the forum and will take you to your profile page, where you can find a list of threads, that you participated.
  
  Sharing personal addresses, telephone numbers and family names not suitable for your safety. If you have any questions, feel free to send me a private message in response.
  
  Thank you

  Omar

• Pavilion dm4-1006tu: 5 GHz in Broadcom 802.11n network adapter support

  Hello

  Broadcom 802.11n network adapter has dual band support? (2.4 GHz and 5 GHz)

  Command prompt provides these details:

  C:\ >netsh wlan show drivers

  Name of the interface: Wi - Fi

  Driver: Broadcom 802.11n Network adapt
  Version: 6.30.223.256
  INF file: C:\Windows\INF\netbc64.inf
  
  C:\Windows\system32\DRIVERS\BCMWL63a.sys
  C:\Windows\system32\DRIVERS\vwifibus.sys
  Type: Wi - Fi Native Driver
  Radio types supported: 802.11n 802. 11 a 802.11 g, 802. 11 b

  Thank you

  @Annshul,

  Hello and thanks for the display on the HP support forums.  Here is a link to your laptops manuals.  All specifications can be found on this page.

  HP Pavilion dm4-1006tu Entertainment Notebook PC - manual

  You will find all the answers to your specifications of systems.

  Thanks again for posting and have a great day.

• New HP Envy 4500 will not connect with my computer

  New HP printer shows blue light of connection with my wireless network but the printer connects with my computer (Windows 7 64-bit)

  I tried troubleshooting with doctor without success.  I thought about the restoration to the manufacturer's specifications. but worried about this procedure.

  Confused.

  Help please

  Adnilybrek28

  Welcome to the HP Forum.

  There is lots of useful information to the Web site of your printer.  In addition, the most important thing you can do is to install the full features software for your printer.  The installation process should help you with the login process.

  General instructions to install the printer software

  • Create a Restore Point: create a restore - Win7 Point OR create a restore point Win8
  • Open drivers HP & downloads
  • Enter your printer model information
  • Select your printer in the list of the 'results '.

  OR

  • Open of printer drivers HP ENVY 4500 e-all-in-one
  • Enter your operating system from the menu drop-down
  • Click NEXT and scroll down
  • Find the category driver - software product installation
  • Select the base driver, e-print, or a full features software
  • Save the *.exe installation package (s) on your computer

  The files will probably save in the "folder"downloads. "

  If it is available, you can download print and scan doctor and / or other programs of the category-utilities

  TIP:

  Install the utilities / tools first. bit installation packages are smaller in size

  • If you have control of "Admin", you can highlight the package and "double-click" to install it, otherwise just right-click, select run as administrator and install.

  NOTES:

  •         Look at the bottom half of the main Web page for your printer for helpful videos help with the installation of the printer software!
  •         Scroll through the list of videos back until you find the video that best fits your situation.
  • Connection USB: download and install the driver software before connecting a USB cable.
  • Ethernet: connect the printer to the network and (optional) assign the printer IP address to the router. Once the printer is connected to the network, make sure that the printer is on, and then install the printer software.
  • Once the initial installation is complete and functional, check / install category - updated

  There is valuable information about the Web site, including Manual, pages How-to's , Troubleshooting and SOLUTIONS section and alerts and notifications for your printer.  Be sure to take a comprehensive look at what's available.  To bookmark the page.

  Click on the Thumbs-Up Kudos to show that you appreciate the help and time of our Experts.

  Although I strive to reflect best practices of HP, I do not work for HP.

  When the answer is a good fix or workaround, click accept as Solution !

• Satellite Pro 6100: unable to connect to internet via wireless network

  Have had some problems with the audio device Yamaha for another thread, which now seems to be resolved. Thank you!

  However, do not know why, but now unable to connect to the internet via a wireless network, although the router works well as another computer in the House is connected wireless.

  When you check the available wireless networks it comes up with "no wireless networks were found in range, make sure that your computer's wireless switch is on.
  Where to check it, can anyone help?

  Thank you

  On the left side, there is WLAN switch. Make sure that the switch is in on IT. After doing this using FN + F8 key combination and activate WLAN device.

  After having done that, you should be able to see the WLAN networks available in your area.

• DeskJet 3070 unable to connect to the ad hoc network

  Hello

  I'll put up my new HP Deskjet 3070. This printer has wireless capability. I would use it wireless with my laptop Macbook Pro (OSX 10.6.8).

  I don't have a wifi network or router at home. That's why I created a wifi (one to one) on my mobile ad - hoc network, named MyPrinterNetwork. This is the type of network used to connect a computer to the other on wifi. MyPrinterNetwork is then visible to other devices compatible wifi (other computers, smartphone,...), and devices can connect to the network (and share files or Internet by wifi). This thread http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/Connect-Deskjet-3070A-wirelessly-to-my... suggests that this printer is able to connect to ad hoc networks.

  I then launch the HP utility to configure the printer. But when the screen appears with the list of available wifi networks, MyPrinterNetwork is not in the list. The list contains only the other wifi available through networks points (values in wifi mode column are all infrastructure) access. If I try to enter the name of a network manually, the software indicates that the printer cannot see or connect to this network.

  Executive Summary:

  -Someone would confirm that the printer Deskjet 3070 is able to connect to the ad-hoc wifi networks?

  -If so, why my adhoc network isn't in the list in the configuration utility?

  Thanks and greetings

  Johnny

  Hello Johnny.

  Deskjet 3070 Network Infrastructure support only, it does not support the ad-hoc connection.

  As you can find in the user manual:

  Traditional wireless connection (requires router)
  
  To connect the HP All-in-One to an integrated wireless WLAN 802.11 network, you will need the following:
  
  - A wireless 802.11b/g/n network that includes a wireless router or access point.
  NOTE: 802.11n will only support 2.4Ghz
  
   A desktop computer or laptop with either wireless networking support, or a network interface card (NIC). The computer must be connected to the wireless network that you intend to install the HP All-in-One on. 
  
  Page 33:http://h10032.www1.hp.com/ctg/Manual/c02887357.pdf
  

  As an alternative, try feature that allows the mac to act as a router in Mac OS X internet sharing Infrastructure mode:

  http://docs.info.Apple.com/article.html?path=Mac/10.7/en/mchlp1540.html

  A limitation, you should be aware, the Internet sharing security supports WEP in shared only authentication mode that is not supported by the printer you can find below:

  http://support.HP.com/us-en/document/c02871178

  Therefore, you should keep sharing without security password in order to connect the printer to the network.

  It will be useful,

  Shlomi

• Broadcom 802.11n network adapter (code 10) does not. grrrr!

  After getting a virus and my computer reset everything (with help) and install my drivers and utilities provided by Dell, Broadcom 802.11n Natwork adapter came with a yellow warning triangle and when I look at properties says device cannot start (code 10) I tried searching for uninstalling and reainstalling solutions and internet usage and have gotten nowhere do you know a solution?

  Hello

  -What is the brand and model of the computer?

  I would suggest trying the following methods and check if it helps.

  Method 1: Run the network troubleshooter utility.
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2: follow the instructions section below.
  http://support.Microsoft.com/kb/943104

  Hope this information is useful.

• Pavilion 15 with Realtek rtl8188ee can't see 802.11n network

  Hello

  a new Pavilion 15 with the network card wireless Realtek rtl8188ee - all drivers up to date.

  I have a Netgear router which is dual band and there is a network of 11g and 11n.

  I can connect and use the network of 11g all very well.

  But I don't even see the 11n network.

  Any thoughts?

  Hello:

  If you mean that you cannot connect to the 5.0 GHz band, it's because the wireless RTL8188EE is a unique card band (2.4 GHz) only.

• HP Envy 7645: Envy 7645 unable to connect to web services

  I have a new 7645 envy that cannot connect to web services.

  I tried the things:

  Verified Internet access. "The report of ' the Web access test results" printers displays "No problems found"

  Checked the wireless connectivity by connecting to the Server Web Embeded printers

  I put statically (primary) DNS 8.8.8.8 and 8.8.4.4 (secondary)

  The IPv4 address is assigned by DHCP, so I changed to static (manually) assigned

  Re-checked wireless connectivity by connecting it to printing Embeded Web Server with static IP address

  Many printer restarts to ensure that the changes have taken effect. (Have you tried turning off and on again?) (HA!)

  Connected to the https://www.hpconnected.com website

  The printer is registered on my devices tab

  The State of the printer is 'offline' (I assume that this would change if the web services were working)

  Any help would be appreciated.

  Hello treadwayl,

  Welcome to the Forums of HP Support!

  Thanks for putting the time in to a very informative post on the ENVY of 7645 being is not able to connect to Web Services. When you try, what is the exact error or the message?

  I want to try the DNS of: Server DNS main = 209.244.0.3 & secondary DNS server = 209.244.0.4

  Reboot the router and the printer, then try again to connect.

  Let me know the out come, soon.

• HP Officejet 4500: Unable to connect printer

  I had installed on my laptop HP Office 4500 G510n-z wireless, but now I have a new laptop with Windows 8.1. The installation CD does not work on Windows 8.1, so what follows, I downloaded from the HP website: "HP Officejet Full Feature Software and Driver Version 14.8.0. I have intalled the software, but when I connect the USB it does not detect my printer, so then I can't complete the installation process. The installation screen has "G510g-m" model number above, while I try to connect to the USB - I think that is the problem. Mine is a G510n-z, but the installation never asked me a model number. There was also only one type of software that I can download for this type of machine, so I need good download. How can I connect to the z G510n? Thank you!

  Hi djahflkhhfalkha,

  Welcome to the HP forums!

  Looks like maybe the USB cable is plugged until the software is ready for it, so I would recommend that you download and run the HP printer installation wizardbecause it will work with the USB cable, regardless of when it is plugged. The software you have is the right software, it's a little more 'delicate' with plugged the USB cable at a certain time. Bit of a control freak, this version of the software is

  Let me know if you have more success with the installation wizard!

• HP Envy 4500: Unable to print

  Hi, Forum-ites,

  I recently downloaded Windows 10. Since then, I was not able to print anything on my desire to 4500.

  I have to update the drivers?

  Hello

  Please perform the procedure which should solve the problem below.

  1. Go to programs and features and uninstall the printer software.
  2. Restart the PC.
  3. Please, download and run the Installer printer HP www.hp.com/go/tools