Unable to connect to applications using a network

Similar Questions

• Satellite Pro 6100: unable to connect to internet via wireless network

  Have had some problems with the audio device Yamaha for another thread, which now seems to be resolved. Thank you!

  However, do not know why, but now unable to connect to the internet via a wireless network, although the router works well as another computer in the House is connected wireless.

  When you check the available wireless networks it comes up with "no wireless networks were found in range, make sure that your computer's wireless switch is on.
  Where to check it, can anyone help?

  Thank you

  On the left side, there is WLAN switch. Make sure that the switch is in on IT. After doing this using FN + F8 key combination and activate WLAN device.

  After having done that, you should be able to see the WLAN networks available in your area.

• Unable to connect the computer to the network

  original title: networking issues

  According to me, only missing me something very simple. I have 5 computers connected between them and all, but we can speak with others. 3 computers running Win XP and Win 7-2. Bart is running Win XP and is connected by wire to a router, and can talk to the other 4 computers. Lisa is running Win 7 and is connected by wire to a router, and can talk to all computers but Bart. Maggie is running Win XP and is connected to a hub that is connected to the router. Maggie can talk to all the computers, but Bart. Homer is running Win XP and is connected to a hub that is connected to the router. Homer can speak to all computers but Bart. Margin is running Win 7 and is connected to a hub that is connected to the router. Margin can also talk about all the computers, but Bart. I do not understand why I can use Bart to access other computers, but the other computers cannot access to Bart. I know it's probably something simple I'm missing. All the computers are on the same workgroup as well. I used the Network Setup Wizard to configure the computers, so I think everything is the same. I have also two printers connected as well. One is connected to Bart via USB and the other printer is connected to the hub. Everyone can print to one that is connected to the hub. But of course only Bart can print on those connected to it.

  Anyone have ideas of what I'm missing.

  Thanks in advance.

  This is almost certainly due to one of two things.

  First, a firewall on Bart can block incoming connections.  Bart can contact other computers because outgoing requests and incoming responses are allowed through, but Bart unsolicited inbound connections are rejected.  A couple of tests, you can run the following:
  Find the address IP of Bart (assuming it's here on 192.168.1.100)
  Bart ping try another machine (start-> Run-> "cmd") and then enter the command:
  ping 192.168.1.100
  Try a 'ping NetBT' Bart from another machine (the same above commands prompt window enter the command :)
  nbtstat-a 192.168.1.100 (note this must be an uppercase 'A' in '-A')
  Both should give you an answer.  See if either get an answer.
  If you are using Windows Firewall, go to-> Windows Firewall Control Panel, click the 'Exceptions' tab and check that there is a tick next to "file sharing and printers."  In the 'Général' tab, verify that there is NOT a check next to "do not allow exceptions.  If you have other firewall products on your computer, you are yourself here.

  Second, the "Workstation" of Bart service may work OK, but its 'Server' service may not be installed / started.  (The workstation service to Bart communicate with other machines, Server service allows other machines contact Bart).  To check this, bring up the Service window (start-> Run-> "services.msc").  You should see a line marked "Server."  Its status should be "started" and its Startup Type should be "automatic".  Otherwise, as administrator, double-click top and doing it this way.

  HTH,
  JW

• Unable to connect to ground or wireless network

  I can't connect to my land or wireless network.  I tried to connect through my laptop to work and land / wireless worked as expected (e.g. problem is not with the router).  Previously, I was able to connect to the network via my computer at home.  Some information:

  1. I get the following message when I consult my network connections:

  "Connection status: unknown.

  The dependency service or group was able to start. »

  2 Windows cannot find any wireless networks in range.

  3. I tried to use Windows Network Diagnostics and the message I got was "The Windows Wireless Service is not running on this computer."  I tried to start the service, but couldn't.

  I would appreciate any you can give troubleshooting tips!  Thank you.

  Hi Kelly1986,

  1. what happens when you try to connect by using wired connection?
  2. do you have security software installed on the computer?
  3. did you of recent changes on the computer?
  4. What is the error message when the service started?

  First of all, I would say that check you what happens when you connect using the wired connection.

  Check also in mode safe mode with Networking if you are able to connect to internet using wired connection.

  Steps to start in safe mode with networking
  1 restart your computer if it is running.
  2. press the F8 key after your initially on powers computer.
  3. Once you see the menu Advanced Startup Options , you can stop tapping.
  4. use the up/down arrow keys to highlight your selection.
  5. Select Safe Mode with network and pressenter.
  6. you should see loading drivers and wait please.
  7. you should then be at the Welcome screen.
  8. connect to your computer using an account with administrator privileges.

  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Restart the computer to return to normal mode

  Disable the security software on the computer and try to start the service and check.

  Important: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  If you still cannot start the try running SFC scan service that would have a search system files corrupted on the computer and replace them.

  For more information please visit the link below.
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  Solve problems, find wireless networks
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks

  The problems of Internet connection
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  Go back with the results!

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• DeskJet 3070 unable to connect to the ad hoc network

  Hello

  I'll put up my new HP Deskjet 3070. This printer has wireless capability. I would use it wireless with my laptop Macbook Pro (OSX 10.6.8).

  I don't have a wifi network or router at home. That's why I created a wifi (one to one) on my mobile ad - hoc network, named MyPrinterNetwork. This is the type of network used to connect a computer to the other on wifi. MyPrinterNetwork is then visible to other devices compatible wifi (other computers, smartphone,...), and devices can connect to the network (and share files or Internet by wifi). This thread http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/Connect-Deskjet-3070A-wirelessly-to-my... suggests that this printer is able to connect to ad hoc networks.

  I then launch the HP utility to configure the printer. But when the screen appears with the list of available wifi networks, MyPrinterNetwork is not in the list. The list contains only the other wifi available through networks points (values in wifi mode column are all infrastructure) access. If I try to enter the name of a network manually, the software indicates that the printer cannot see or connect to this network.

  Executive Summary:

  -Someone would confirm that the printer Deskjet 3070 is able to connect to the ad-hoc wifi networks?

  -If so, why my adhoc network isn't in the list in the configuration utility?

  Thanks and greetings

  Johnny

  Hello Johnny.

  Deskjet 3070 Network Infrastructure support only, it does not support the ad-hoc connection.

  As you can find in the user manual:

  Traditional wireless connection (requires router)
  
  To connect the HP All-in-One to an integrated wireless WLAN 802.11 network, you will need the following:
  
  - A wireless 802.11b/g/n network that includes a wireless router or access point.
  NOTE: 802.11n will only support 2.4Ghz
  
   A desktop computer or laptop with either wireless networking support, or a network interface card (NIC). The computer must be connected to the wireless network that you intend to install the HP All-in-One on. 
  
  Page 33:http://h10032.www1.hp.com/ctg/Manual/c02887357.pdf
  

  As an alternative, try feature that allows the mac to act as a router in Mac OS X internet sharing Infrastructure mode:

  http://docs.info.Apple.com/article.html?path=Mac/10.7/en/mchlp1540.html

  A limitation, you should be aware, the Internet sharing security supports WEP in shared only authentication mode that is not supported by the printer you can find below:

  http://support.HP.com/us-en/document/c02871178

  Therefore, you should keep sharing without security password in order to connect the printer to the network.

  It will be useful,

  Shlomi

• I am unable to connect my system using the microsoft account.

  Separated from this thread.

  Hello

  Unable to connect to my system using microsoft account IAM. I forgot the password, so went online and reset it, try to connect with the new password still showing the error message "your pc is offline. Please sign in with the last password used on this C. P'?

  no idea about my old password and unable to connect with the new password too.

  What is the fix for this?

  Hi Deepika,

  Thanks for posting your query on Microsoft Community forum.

  I would be grateful if you can provide us with the following information to help us better understand the issue.

  1. Do you have any active account except your Microsoft account?
  2. Are able to connect to your e-mail you used as Microsoft account using the new password on the web?

  I suggest you refer to the following articles in order to retrieve your forgotten password.

  What to do if you forget your Windows password

  http://Windows.Microsoft.com/en-us/Windows/what-do-forget-Windows-password#1TC=Windows-8

  Note: When you reinstall Windows, make sure that you must back up all data.

  Return to your Microsoft account if it has been compromised

  http://Windows.Microsoft.com/en-us/Windows-8/get-back-blocked-hacked-account

  Hope this information is useful.

  Thank you.

• Unable to connect to vsphere using VIX ESXi

  Dear experts,

  Please help me get started with VIX!

  I'm trying to start a virtual machine hosted in a vSphere, ESXi (4.0.0, 208167) using the utility "vmrun" I got by installing the VIX API 1.8.1 on my windows xp sp3 machine.  The command that I used is

  t h https://199.63.30.163/ u root Pei xxxx esx vmrun start "[datastore1] L4-pare-fire/L4 - Firewall.vmx.

  The answer I got was

  Unable to connect to the host.

  Error: Unknown error

  I'm doing something wrong?

  Thanks in advance for any help

  Arun

  The content of the log file is as below

  VMware-vix-E159514 - 5580.log:

  15:45:46.751 Jul 02: app | Journal of Vix pid = 5580 version = - 1 build = build-186713 option = exit

  15:45:46.751 Jul 02: app | The process is 32-bit.

  15:45:46.751 Jul 02: app | Host codepage = encoding windows-1252 = windows-1252

  15:45:46.751 Jul 02: app | Foundry Init: implementation of State comprehensive (0 topics)

  15:45:46.751 Jul 02: app | Vix_InitializeGlobalState: vixLogLevel = 0

  15:45:46.751 Jul 02: app | Vix_InitializeGlobalState: vixApiTraceLevel = 0

  15:45:46.751 Jul 02: app | Vix_InitializeGlobalState: vixDebugPanicOnVixAssert = 0

  15:45:46.751 Jul 02: app | Vix_InitializeGlobalState: vixLogRefcountOnFinalRelease = 0

  15:45:46.892 Jul 02: app | Debugging VMX has been requested, but does not exist.  VMX using standard.

  15:45:46.892 Jul 02: app | Stats VMX has been requested, but does not exist.  VMX using standard.

  15:45:46.986 Jul 02: app | DynaLink inaccessible oleaut32.dll?

  15:45:46.986 Jul 02: app |

  15:45:46.986 Jul 02: app | Unable to connect to WMI

  15:45:46.986 Jul 02: app | VmhsHostInfoPopulateSystem: Could not get the host model.

  15:45:46.986 Jul 02: app | VmhsHostInfoPopulateSystem: Could not obtain from the vendor of the host.

  15:45:46.986 Jul 02: app | Host operating system: "Microsoft Windows XP Professional 5.1.2600 Service Pack 3", product type '1', then mask ' 0 x 0100.

  15:45:46.986 Jul 02: app | HOSTINFO: See Intel CPU, numCoresPerCPU 2, numThreadsPerCore 1.

  15:45:46.986 Jul 02: app | HOSTINFO: This machine has 1 physical CPU, 2 total hearts and 2 logical processors.

  15:45:47.111 Jul 02: app | REGIONAL settings windows-1252 - & gt; The user NULL = system 409 = 409

  15:45:47.111 02 Jul: app | VixHost_ConnectEx: version - 1, hostType 5, hostName https://199.63.30.163hostPort 0, options of 528

  15:45:47.111 Jul 02: app | HOSTINFO 1325145992288 @ 3579545Hz - & gt; 0 to 1000000Hz

  15:45:47.111 Jul 02: app | HOSTINFO ((x * 2399728063) & gt; & gt; 33) +-370199562197

  15:45:47.111 Jul 02: app | HOSTINFO 1325145992415 @ 3579545Hz - & gt; 0 to 1000000Hz

  15:45:47.111 Jul 02: app | HOSTINFO ((x * 2399728063) & gt; & gt; 33) +-370199562233

  15:45:47.236 Jul 02: app | VIX: : VixTranslateVimException: received an invalid response error.

  15:45:47.236 Jul 02: app | VIX: : VixTranslateVimException: HTTP response code is 400.

  15:45:47.236 Jul 02: app | VIX: : VixTranslateVimException: response message is «»

  VMware-vixWrapper-E159514 - 5580.log

  15:45:46.501 Jul 02: app-6504. Journal of the VixWrapper pid = 5580 version = 1 build = build-207905 option = exit

  15:45:46.501 Jul 02: app-6504. The process is 32-bit.

  15:45:46.501 Jul 02: app-6504. Host codepage = encoding windows-1252 = windows-1252

  15:45:46.501 Jul 02: app-6504. config points to the library which implements nonexistent ' C:\Program VMware VIX
  ws_server_esx-4\32bit\vix.dll'

  15:45:46.501 Jul 02: app-6504. config points to the library which implements nonexistent ' C:\Program VMware VIX
  ws_server_esx-4\32bit\vix.dll'

  15:45:46.501 Jul 02: app-6504. config points to the library which implements nonexistent ' C:\Program VMware VIX
  ws_server_esx-4\32bit\vix.dll'

  15:45:46.501 Jul 02: app-6504. config points to the library which implements nonexistent ' C:\Program VMware VIX
  ws_server_esx-4\32bit\vix.dll'

  15:45:46.501 Jul 02: app-6504. Loading library that implements C:\Program VMware VIX Vix
  VSphere-4.0\32bit\vix.dll

  15:45:46.579 Jul 02: app-6504. Cannot load func VixHost_OpenVM draws in C:\Program VMware VIX
  VSphere-4.0\32bit\vix.dll (127)

  I took another look at the command. Missing the "/ sdk.

  t h https://199.63.30.163/sdk u root Pei xxxx esx vmrun start "\[datastore1\] L4-pare-fire/L4 - Firewall.vmx.

  André

• Unable to connect target database using dbclient

  Hi all
  
  I installed database 11.2.0.2 successfully on linux machine.other machine is windows machine, I installed in CUSTOMER DB 11.2.0.2 by using db client unable to connect target database.
  
  
  Database version: 11.2.0.2(64 bit)
  
  Windows database: 11.2.0.2(32bit)
  
  
  Thank you
  GS

  I installed database 11.2.0.2 successfully on linux machine.other machine is windows machine, I installed in CUSTOMER DB 11.2.0.2 by using db client unable to connect target database.

  Set up Listener on the server?

  Can you tnsping from windows to linux machine?

• Unable to connect my application...

  Hi all

  Yesterday when I tried to connect my application of Cascades...

  I found that I can not export Release version...

  Even in eclipse I can't sign bar file is @.

  But my friend in Italy can do export Release version.

  I'm not sure it's a local issue, I asked another friend in Taiwan (as where I am) but he may sign with success...

  Any way to solve this problem?

  Thank you

  Simon

  

  Now the signature process is back...

  More than a day... @.

  Thank you

  Simon

• Cannot connect on application using PS Designer

  Hello
  I'm in the middle of the installation of the MFC 9.0 on PT8.49.
  I upgraded my 8.49.15 peopletooles patch and run the install.
  After running the script generated by the PPLTLS84CUR project, I am not able to connect to APPDesigner, use more PS/PS, I can connect to Data Mover, using both PS/PS, but also the sysadm.
  SQLPlus also works with the id
  I was able to build the project and connect to AppDesigner using PS/PS util that I t dthe PPLTLS84CUR construction phase
  and run the script.
  The error I get when trying with PS/PS is "Invalid UserID and Password for signon"
  I use COnfig Manager to set my connectid and username before you start the Appdesigner installation related steps. It was working until I have build and run the above script
  Help, please.
  Thank you

  You must run the grant.sql script again.

  Nicolas.

• Unable to connect to surface RT in network neighborhood

  The Tablet shows up in my other pc windows8 (cable) network neighborhood, but when I try to connect to it I get an error "the network not found path.

  I turn file sharing and printers on the tablet.

  I can see and access the network shares on other machines of the Tablet, but I can't access shares on itself (i.e. by browsing to the shared folders on the Tablet, the tablet itself).

  I also noticed that the Service "Computer browser" on the Tablet is set to disabled (I think the firewall?)

  My Event Viewer is littered with errors like these:

  Error - Service Control Manager

  The computer browser Service depends on the Server service which failed to start because of the following error:

  The Service cannot be started, either because it is disabled or because it has no enabled devices is associated to him.

  I tried to manually start the service but I get error 1068 the dependency service L or the group could start.

  In addition, I seem to be unable to sync with Gmail from the mailer of the Tablet application (same settings work fine on my other machines) with the warning "could not synchronize messages. This could be unrelated, however.

  I hope someone has a solution because I really need access.

  See you soon,.

  ELCO

  perform services and start the Server service and set it to automatic. this to do
   
  the start screen, tap the word Services and then go into the settings. start the services
   
  to find the server and make the change. reboot and your Surface should now work
   
  as an ordinary PC is the partition plan. You should be able to share the files
   
  which content you want to make available.
   
   
   
   
  Barb
   
  MVP - Windows/entertainment and connected home
   
  http://digitalmediaphile.com/
   
  Please mark as answer if that answers your question
   
   
   
   

• Satellite A300 - unable to connect to a local wireless network

  Hello

  I have a question: bought a laptop two days ago, the wireless LAN doesn't work. It can detect the network, accepts the network key, he just used to connect.

  Help, please.

  Hello!

  Have you checked the TCP/IP of the WLAN card settings?
  I put t know the network configuration of the router, but if you are using DHCP you must use this mode or you set a static IP address.
  Check it!

  Also, check if your wireless network card is recognized correctly in Device Manager and try to reset your router. This means that you must remove the router AC adapter and wait 5 minutes. Then plug the AC/DC adapter again.
  Sometimes a firmware update might be useful too.

  Good bye

• Satellite Pro L40 PSL43E: Unable to connect to wireless local area network

  Hello to everyone who reads,

  I've had this laptop for about 12 months and a few days ago while trying to connect to the internet, she advised that I was not connected to my router.

  I have another laptop, it connects well with wireless and it connects fine using the ethernet cable but wireless!
  Especially, when I switch the radio power on/off using the small switch on the front the same symbol rises (the cell phone, red circle with a red slash through it, then the sign of the internet!)

  I tried the update of the driver for the Atheros AR5007EG Wireless Network wireless adapt and not much happened!

  I'm not in portable computers in a big way so any advise given better would become simple?
  I saw some stuff about the removal of the cards and other things? but I don't know where to start!

  Is it a common thing with these laptops?
  Need help please, I desperately need my laptop wireless.

  Thanks a lot to all in advance

  Paul

  Hello Paul

  Make sure that the wireless network adapter is correctly enabled.
  After putting using WLAN switch using FN + F8 key combination and make sure the wireless network adapter is enabled.

• Unable to connect to a specific wireless network

  I'm currently sitting in a café, connected to their wifi WPA2 with my MacBook.

  I can not connect to the same network with my iPhone 4S. It just do not see it--other networks, Yes, but not the coffee. I tried to reset the iPhone; the other networks still appear, but not the one I want to join. I tried to connect manually several times with 'other '.... ', using my MacBook to check SSID and password of the wifi, but the iPhone says that it cannot find the network let alone accede.

  It's a signal very strong: the wifi bars are entirely black in the menu bar of my MacBook. My iPhone can see half a dozen other wifi networks, including those where the router is not as tight as one that I am trying to connect. I can not not connect to others: either they are password protected, or require a customer relationship or are not worthy of trust.

  What is going on?

  Just to add: I know that the standard Apple FAQ on connectivity issues iOS wifi; they are not a help here.

• Difficulty to configure Windows Live Essentials, unable to connect to applications with a Microsoft operating account

  I am currently trying to set up parental control and accounts of e-mail for my children.  I am running Windows 7 (working group, but currently on a group of houses), I installed Windows essentials three days ago.  When I click on the user account I am redirected to connect to Windows live Family Safety, where I quickly said that "my password or email is incorrect, please try again."  My log in details are very good, (I changed the password twice, added to an alias, spoke to Live ID twice).  I couldn't connect at all when I connect to my Microsoft account to access the fss.live.com in this way I'm told I'm not a parent of an existing family and around, I'm going again.

  I thought it was a problem specifically related to the safety of the family, but when I tried to set up my account @outlook.com to synchronize with Windows Live mail 2012, once again, the password is rejected even though I can log in and access my Inbox via firefox.

  Any suggestions on what I can do to solve these problems?

  I actually fixed me this problem.  It is that I have a two-step process of verification of my microsoft account who don't like no other applications like Windows Live Mail 2012 and Windows Live Family Safety.  I had to use a code app (generated in the section of the security of your Microsoft account) password, instead of my usual password.  All fixed.

  Three days of hell, 4 cats with Microsoft support, 2 phone calls with microsoft technical support and the suggestion that I have to contact my system administrator or pay for outside access to fix it.  All this because having not used codes app before that I didn't know that's what they do!  And nobody told me to use for my paper application code in.