Unable to connect to the agent
And another question :-(
Enterprise manager cannot connect to any remote agent.
He notes:
SERV01.localdomain unable to connect to the agent at https://DBSERV01.localdomain:3872/emd/hand / [No route to host]
If connect you to the address via firefox:
Access to Firefox:
EMAgent 12.1.0.4.0
Congratulations, EMAgent work!
If I try to connect to the url of the agent from the server on which GRID is running:
wget - No.-check-certificate https://192.168.146.130:3872/emd/hand /
"" WARNUNG: Kann das Zertifikat von "192.168.146.130"nicht prufen, von ausgestellt"" / O = EnterpriseManager on LinuxGRID.localdomain/OR = EnterpriseManager on LinuxGRID.localdomain/L = EnterpriseManager on LinuxGRID.localdomain/ST=CA/C=US/CN=LinuxGRID.localdomain««:.
Ein signiertes selbst Zertifikat found.
"WARNUNG: certificate requested host name does not match the common name ' SRVB01.localdomain ' ' 192.168.146.130 '. '.
Edit: I have re-released the comand and replaced ip number with the correct host name - the warning about the corresponding certificate not came yet.
Gesendet HTTP Anforderung, warte auf Antwort... 200 OK < < < ==
Lange: nicht spezifiziert
In"' index.html '"speichern. "
[ <=> ] 175 --.-K/s in 0s
2015-05-21 21:36:36 (47.0 Mbps) -"' index.html ' ' sales [175]»»
This seems ok to me.
The connection to the repository is great too:
Oracle@SRVB01 Agent] $ wget - No.-check-certificate https://LinuxGRID.localdomain:4903/empbs/upload
-2015-05-21 22:12:36- https://linuxgrid.localdomain:4903/empbs/upload
Auflosen of host name"linuxgrid.localdomain «...» 192.168.146.120
Verbindungsaufbau zu linuxgrid.localdomain | 192.168.146.120 |: 4903... clear.
"" WARNUNG: Kann das Zertifikat von "linuxgrid.localdomain"nicht prufen, von ausgestellt"" / O = EnterpriseManager on LinuxGRID.localdomain/OR = EnterpriseManager on LinuxGRID.localdomain/L = EnterpriseManager on LinuxGRID.localdomain/ST=CA/C=US/CN=LinuxGRID.localdomain««:.
Ein signiertes selbst Zertifikat found.
Gesendet HTTP Anforderung, warte auf Antwort... 200 OK < < ==
Lange: 314 [text/html]
In"" Download ""speichern. "
100%[===========================================================================================================================================================>] 314 --.-K/s in 0s
2015-05-21 22:12:36 (1.81 MB/s) -"" Download "" sales [314/314]»»
Some agent messages:
[oracle@SRVB01] of $. / emctl status agent
Oracle Enterprise Manager Cloud control 12 c Release 4
Copyright (c) 1996, 2014 Oracle Corporation. All rights reserved.
---------------------------------------------------------------
Agent version: 12.1.0.4.0
Version of the WHO: 12.1.0.4.0
Protocol version: 12.1.0.1.0
Home Agent: / u01/app/oracle/product/Agent/agent_inst
The agent logs directory: / u01/app/oracle/product/Agent/agent_inst/sysman/log
File binary agent: /u01/app/oracle/product/Agent/core/12.1.0.4.0
Agent process ID: 9477
Parent process ID: 9409
Agent URL: https://SRVB01.localdomain:3872/emd/hand /
Local agent NAT URL: https://SRVB01.localdomain:3872/emd/hand /
Repository URL: https://LinuxGRID.localdomain:4903/empbs/upload
Starts at: 2015-05-21 21:24:34
Started by user: oracle
Operating system: Linux version 3.8.13 - 68.2.2.el6uek.x86_64 (amd64)
Last charging: (none)
Last download successful: (none)
Last attempt to download: (none)
Total megabytes of XML files uploaded so far: 0
Number of XML, waiting for loading files: 0
Size of the XML files in the upload wait (MB): 0
Available disk space on the file upload system: 75,14%
Collection status: activated Collections
Pulse Status: Ok
Last heartbeat to WHO attempt: 2015-05-21 21:43:38
Last pulse in SGD: 2015-05-21 21:43:38
Then, at the request of the heart rate to WHO: 2015-05-21 21:44:38
---------------------------------------------------------------
Agent is running and ready
/emctl download agent
Oracle Enterprise Manager Cloud control 12 c Release 4
Copyright (c) 1996, 2014 Oracle Corporation. All rights reserved.
---------------------------------------------------------------
Download EMD completed successfully
But if I do a check - no uload happened
[oracle@SRVB01 bin] $. / emctl status agent
Oracle Enterprise Manager Cloud control 12 c Release 4
Copyright (c) 1996, 2014 Oracle Corporation. All rights reserved.
---------------------------------------------------------------
Agent version: 12.1.0.4.0
Version of the WHO: 12.1.0.4.0
Protocol version: 12.1.0.1.0
Home Agent: / u01/app/oracle/product/Agent/agent_inst
The agent logs directory: / u01/app/oracle/product/Agent/agent_inst/sysman/log
File binary agent: /u01/app/oracle/product/Agent/core/12.1.0.4.0
Agent process ID: 9477
Parent process ID: 9409
Agent URL: https://SRVB01.localdomain:3872/emd/hand /
Local agent NAT URL: https://SRVB01.localdomain:3872/emd/hand /
Repository URL: https://LinuxGRID.localdomain:4903/empbs/upload
Starts at: 2015-05-21 21:24:34
Started by user: oracle
Operating system: Linux version 3.8.13 - 68.2.2.el6uek.x86_64 (amd64)
Last charging: (none)
Last download successful: (none)
Last attempt to download: (none)
Total megabytes of XML files uploaded so far: 0
Number of XML, waiting for loading files: 0
Size of the XML files in the upload wait (MB): 0
Available disk space on the file upload system: 75,14%
Collection status: activated Collections
Pulse Status: Ok
Last heartbeat to WHO attempt: 2015-05-21 22:03:39
Last pulse in SGD: 2015-05-21 22:03:39
Then, at the request of the heart rate to WHO: 2015-05-21 22:04:39
There is no active firewall
I tried to fix it with this command:
" . / emctl remove property - name" oracle.sysman.core.omsAgentComm.ping.pingCommand "" "
Hope everyone has an idea
I think I solved this problem.
First configure everything the maschine again one by one, don't use is not the function of the cloning of VM.
Adding a link
ln-s /lib64/libpcap.so.N.N.N r/lib64/libpcap.so.0.9.4
and installed there yum install subversion
I installed the packed listed in the Enterprise Manager configuration by hand.
Before that I did by yum install oracle-RDBMS-server-11 GR 2-preinstallation.
Tags: Enterprise Manager
Similar Questions
-
Cloud new control panel - unable to connect to the agent
I'm done just to install the last control of cloud 12.1.0.3 by following oracle document e22624.
Everything installed fine and I am able to connect to the cloud control. I manually added a target (our test server). The installation was successful without error.
However the cloud control shows: error of assessment metrics start - unable to connect to the agent to https://server:3872/emd/main / [Connection timed out: connect]
I ran the following on the test server to make sure that the management agent runs:
/opt/app/oracle/product/12.1.0/agent/core/emctl status agent
and I see this:
Oracle Enterprise Manager 11g Database Control Release 11.2.0.3.0
Copyright (c) 1996, 2011 Oracle Corporation. All rights reserved.
---------------------------------------------------------------
Agent version: 10.2.0.4.4
Version of the WHO: 10.2.0.4.4
Protocol version: 10.2.0.4.4
Agent home: /opt/app/oracle/product/11.2.0/dbhome_1/server_test
File binary agent: /opt/app/oracle/product/11.2.0/dbhome_1
Agent process ID: 24514
Parent process ID: 23632
Agent URL: https://server:3938/emd/main
Repository URL: https://server:1158/em/upload /
Starts at: 2013-11-15 13:16:53
Started by user: oracle
Last reload: 2013-11-15 13:16:53
Last download successful: 2013-11-15 14:34:02
Total megabytes of XML files uploaded so far: 2.68
Number of XML, waiting for loading files: 0
Size of the XML files in the upload wait (MB): 0.00
Available disk space on the file upload system: 81.34%
Directory to upload Data channel: /opt/app/oracle/product/11.2.0/dbhome_1/server_test/sysman/recv
Last pulse in SGD: 2013-11-15 14:36
---------------------------------------------------------------
Agent is running and ready
According to state that something is wrong. The test server is currently installed OEM Database Control. The directions said nothing about not being able to install Cloud control and have control OEM database.
My question is this: can I have the OEM Database Control and control of Cloud? If this is not the case, what should I do to get the Cloud control to work?
Thank you
I opened a support ticket with Oracle. It was that the firewall is blocking communication from the SGD server to the agent. Everything works now as expected.
-
Hi all!
I am trying to create a client application to push to go with my project that I am creating a customer and am trying to learn how the PushCollector 10.1 functions to do this. I seem to have a problem, however, where the application may not be able to connect to the Agent to push after entering my credentials sent by the Services of Blackberry Push team showing.
I logged into my account to make sure it is active and it is and have re-joined the AppID and the PPG URL 8 times literally!
What I read I don't need to change anything in the file bar.xml for the PushCollector, but maybe I missed something.
Can someone help me please?
Thanks for your time,
Rob
Push requires a real device, so I think you have to find the cause of the problem.
-
Unable to connect to the Agent push
Hi all
I'm having some trouble with the Push service - all examples of applications that I tested (collector Simple Client Push, Push and push Capture), including the app I am train, have a problem with the connection to the Agent to push (aka. the bb::data :ushService.hasConnection always returns false).
Relevant information to the debug log:
gid size[1] gid[1000] dname: "XXX" providerApplicationId: "34XX-XXXX19BDXXXX4M52XXXXXX7436XXXX2c3" is enterprise perimeter: false Connect to personal/consumer agent: true [ "cc.jlx.boreas.invoke.push" ]: /pps/services/push/ipc open failure: 6 Push pps file is not open.
The error "/ pps/services/push/ipc open failure" was mentioned in an article on the devblog saying that it happens when the signature keys have push privilege, but I received my key a few weeks ago, so it shouldn't be the isssue. I also checked that the application has permission to "_sys_use_consumer_push" in its bar-descriptor file.
It might be worth noting that I tested it in Dev Alpha Simulator with SDK version 10.0.9.2318 on a Mac.
Any ideas? I have the feeling that I missed something completely Basic.
Hello
Unfortunately, push is not supported now on the Dev Alpha Simulator.
So you need physics Dev Alpha or 10 BlackBerry device to test with.
Matt
-
View is unable to connect to the agent with PCoIP
We can connect to the virtual machine with RDP and PCoIP not working. The client starts to connect to the agent, the screen remains black, then customer exits
The firewall should not be the problem, customer and agent can communicate because of newspapers and wireshark.
Any idea is welcome here.
Our facility:
ESX 4.1
VCENTER 4.1
VManager 4.0.1 (updated)
VIEW 4.0.1 (updated)
I think this may be your problem.
When updating ESX 4.0 Update 2 my PCoIP broke.
There is a task 4.0.1 agent that must be installed on the virtual machines.
VMware KB 1022830 KB1022830
-
Unable to connect to the agent of activation
Hello.. I am using soa suite 10.1.3.1.0 and the oracle 10g database. I practice the example ADT QA adapter tutorial came with the 10.1.3.1 installation
The purpose of this tutoril is to remove the message queue and customer_in_queue to the customer_out_queue of the table in the database of Scott.
I changed the file ra.xml - oc4j in the path
C:\product\10.1.3.1\OracleAS_2\j2ee\oc4j_soa\application-deployments\default\AqAdapter
and added a few lines of configuration data in the tutorial on the data - sources.xml in the path file
C:\product\10.1.3.1\OracleAS_2\j2ee\home\config
I got the following error
[deployProcess] Deployment of process C:\jdevstudio10131\jdev\mywork\Application1\AQADapterADT\output\bpel_AQADapterADT_1.0.jar
BUILD FAILED
C:\jdevstudio10131\jdev\mywork\Application1\AQADapterADT\build.XML:79: There was a problem connecting to the server 'localhost' using the port '80': bpel_AQADapterADT_1.0.jar failed to deploy. Exception message is: ORABPEL-09903
Could not initialize the agent of activation.
An error occurred during initialization of a process enabling agent 'AQADapterADT', version "1.0".
Please ensure that the agents of activation are configured correctly in the bpel (bpel.xml) deployment descriptor.
oracle.tip.adapter.fw.agent.jca.JCAActivationAgent: java.lang.reflect.InvocationTargetException
at com.collaxa.cube.engine.core.BaseCubeProcess.startAllActivationAgents(BaseCubeProcess.java:354)
at com.collaxa.cube.engine.deployment.DeploymentManager.activateDefaultRevision(DeploymentManager.java:1446)
at com.collaxa.cube.engine.deployment.DeploymentManager.setDefaultRevision(DeploymentManager.java:1405)
at com.collaxa.cube.engine.deployment.DeploymentManager.deployProcess(DeploymentManager.java:821)
at com.collaxa.cube.engine.deployment.DeploymentManager.deploySuitcase(DeploymentManager.java:670)
at com.collaxa.cube.ejb.impl.BPELDomainManagerBean.deploySuitcase(BPELDomainManagerBean.java:445)
at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.evermind.server.ejb.interceptor.joinpoint.EJBJoinPointImpl.invoke(EJBJoinPointImpl.java:35)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
to com.evermind.server.ejb.interceptor.system.JAASInterceptor$ 1.run(JAASInterceptor.java:31)
at com.evermind.server.ThreadState.runAs(ThreadState.java:620)
at com.evermind.server.ejb.interceptor.system.JAASInterceptor.invoke(JAASInterceptor.java:34)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.TxRequiredInterceptor.invoke(TxRequiredInterceptor.java:50)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.java:55)
at com.evermind.server.ejb.StatelessSessionEJBObject.OC4J_invokeMethod(StatelessSessionEJBObject.java:87)
at DomainManagerBean_RemoteProxy_4bin6i8.deploySuitcase (unknown Source)
at com.oracle.bpel.client.BPELDomainHandle.deploySuitcase(BPELDomainHandle.java:317)
at com.oracle.bpel.client.BPELDomainHandle.deployProcess(BPELDomainHandle.java:339)
at deployHttpClientProcess. jspService(_deployHttpClientProcess.java:376)
at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:453)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:591)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:515)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
to oracle.security.jazn.oc4j.JAZNFilter$ 1.run(JAZNFilter.java:396)
at java.security.AccessController.doPrivileged (Native Method)
at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:410)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:621)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:368)
at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:866)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:448)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:302)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:190)
to oracle.oc4j.network.ServerSocketReadHandler$ SafeRunnable.run (ServerSocketReadHandler.java:260)
to com.evermind.util.ReleasableResourcePooledExecutor$ MyWorker.run (ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)
I don't know what to do to enable agents to activation.
Help is appreciated...
Thank you
Dan.Sorry, I also forgot to mention that you should check your database and connections AQ pools.
Connection to Enterprise Manager
Home-> administration-> jdbc-> data sources resources
Make sure that there is an entry for your database of scott. Be sure to note that jdbc name.
Now, you should check the AQ connection pool. This lies
Home-> then I think that there is a drop down for resource adapters. Choose this option-> AQ adapter
Create a new entry something like
EIS/AQ/xxxx
point to the source of data of database created earlier.
Now you must ensure that in your QA partner link that it points to the above connection pool.
see you soon
James -
Original title: unable to connect to the internet
Whenever I connect to my computer and get it on my desk, it goes on to say that Cisco AnyConnect VPN Service not available. How can I fix? I am not connected to the internet and I can't connect to the internet as well. He said also Cisco AnyConnect VPN service agent is not an answer. Please restart this application after a minute. Also, I can't use my firewall for some reason, if I try to allow its loading and the greenbar's going that far - then stops and says that there is an error. I forgot where I tried to activate.
Oh thanks for the help but I fix it myself. I just did a system restore to a month before
-
Unable to connect to the Remote Agent of VMware Converter
I'm trying to V2V an our old infrastructure of VMware 2.5.x our vSphere infrastructure W2K Server.
I've done several servers of the old infrastructure without problem.
On this particular server, however, fails with the error "Unable to connect to the Remote Agent of VMware Converter"
The journal of the points below on the $ IFC share.
[2011-01-14 12:32:40.008 'P2V' 4788 info] [ClientConnection, 101] Connection to IPC$ on 10.101.0.171 like 10.101.0.171\administrator
[2011-01-14 12:33:10.086 'P2V' 4788 info] [, 0] SMB Manager: connection error for share [\\10.101.0.171\IPC$]: 1792[2011-01-14 12:33:10.086 'P2V' 4788 WARNING] [ClientConnection, 115] Unable to connect to IPC$ on 10.101.0.171. Reason: Error unspecified in the mechanism of the remote execution
[2011-01-14 12:33:10.086 'P2V' 4788 info] [ClientConnection, 119] Renounce the attempt to connect to IPC$ on 10.101.0.171
[2011-01-14 'P2V' 4788 error 12:33:10.086] [task, 295] Task failed: P2VError REMOTE_UFA_FIREWALLED (10.101.0.171)
[2011-01-14 12:33:10.086 'P2V' 4788 verbose] [task, 339] The transition of InProgress asked congestive
[2011-01-14 12:33:10.086 'P2V' 4788 verbose] [task, 388] Successful passageAny suggestions for a solution would be appreciated.
It looks like maybe the firewall on the server. Install the converter directly on the machine you want to convert, or temporarily disable the firewall.
-
Unable to connect to the Cisco VPN you use native client: El Capitan
I'm unable to connect to the Cisco VPN using native client server Cisco OSX via IPSec. Before the upgrade for connections VPN El Capitan has worked without any problems. VPN uses the shared secret of group. It seems, I get the error "raccoon [2580] ': could not send message vpn_control: Broken pipe ' during the connection."
When I upgraded to El Capitan, VPN connection has stopped working. I tried to do the following:
* connect using the old work VPN connection: without success
Config: Hand [server address, account name],
AUTH settings [shared secret, the Group name].
Advanced [mode to use the passive FTP = TRUE]
errors:
"authd [124]: copy_rights: _server_authorize failed.
"raccoon [2580]: could not send message vpn_control: Broken pipe"
...
* Add new VPN connection using L2TP over IPSec: without success
Config: Hand [server address, account name],
Authentication settings [user authentication: password, identification of the Machine: Shared Secret].
Advanced [send all traffic on the VPN = TRUE]
errsors:
"pppd [2616]: password not found in the system keychain.
"authd [124]: copy_rights: _server_authorize failed.
...
* Add new connection using Cisco via IPSec VPN: without success
Main config: [server address, account name].
AUTH settings [shared secret, the Group name].
Advanced [mode to use the passive FTP = TRUE]
errors:
"authd [124]: copy_rights: _server_authorize failed.
"raccoon [2580]: could not send message vpn_control: Broken pipe"
VPN server is high and does not work and accepts connections, this problem is entirely on the client side.
I. Journal of Console app existing/Legacy VPN connection:
26/03/16 10:24:01, 000 syslogd [40]: sender ASL statistics
26/03/16 10:24:01, nesessionmanager 311 [2112]: NESMLegacySession [VPN_CONN_NAME$: B7816CCC-2D2C-4D6D - 83 D 9-B2C8B6EB8589]: received an order to start SystemUIServer [2346]
26/03/16 10:24:01, nesessionmanager 311 [2112]: NESMLegacySession [VPN_CONN_NAME$: B7816CCC-2D2C-4D6D - 83 D 9-B2C8B6EB8589]: changed to connecting status
26/03/16 10:24:01, nesessionmanager 313 [2112]: IPSec to connect to the server $VPN_SERVER_IP
26/03/16 10:24:01, 316 nesessionmanager [2112]: phase 1 of the IPSec from.
26/03/16 10:24:01, racoon 338 [2580]: agreed to the takeover of vpn connection.
26/03/16 10:24:01, racoon 338 [2580]: agreed to the takeover of vpn connection.
26/03/16 10:24:01, racoon 339 [2580]: IPSec to connect to the server $VPN_SERVER_IP
26/03/16 10:24:01, racoon 339 [2580]: IPSec to connect to the server $VPN_SERVER_IP
26/03/16 10:24:01, racoon 339 [2580]: connection.
26/03/16 10:24:01, racoon 339 [2580]: IPSec Phase 1 started (initiated by me).
26/03/16 10:24:01, racoon 339 [2580]: IPSec Phase 1 started (initiated by me).
26/03/16 10:24:01, racoon 349 [2580]: IKE Packet: forward the success. (Initiator, Aggressive Mode 1 message).
26/03/16 10:24:01, racoon 350 [2580]: > > > > > status of phase change = Phase 1 began by us
26/03/16 10:24:01, racoon 350 [2580]: > > > > > status of phase change = Phase 1 began by us
26/03/16 10:24:01, racoon 381 [2580]: no message must be encrypted, 0x14a1, side 0 status
26/03/16 10:24:01, racoon 381 [2580]: no message must be encrypted, 0x14a1, side 0 status
26/03/16 10:24:01, 381 nesessionmanager [2112]: Controller IPSec: IKE FAILED. phase 2, assert 0
26/03/16 10:24:01, 381 nesessionmanager [2112]: Controller IPSec: retry the aggressive mode IPSec with DH group 2
26/03/16 10:24:01, nesessionmanager 404 [2112]: phase 1 of the IPSec from.
26/03/16 10:24:01, racoon 404 [2580]: IPSec to connect to the server $VPN_SERVER_IP
26/03/16 10:24:01, racoon 404 [2580]: IPSec to connect to the server $VPN_SERVER_IP
26/03/16 10:24:01, racoon 405 [2580]: connection.
26/03/16 10:24:01, racoon 405 [2580]: IPSec Phase 1 started (initiated by me).
26/03/16 10:24:01, racoon 405 [2580]: IPSec Phase 1 started (initiated by me).
26/03/16 10:24:01, 407 raccoon [2580]: IKE Packet: forward the success. (Initiator, Aggressive Mode 1 message).
26/03/16 10:24:01, 407 raccoon [2580]: > > > > > status of phase change = Phase 1 began by us
26/03/16 10:24:01, 407 raccoon [2580]: > > > > > status of phase change = Phase 1 began by us
26/03/16 10:24:01, racoon 436 [2580]: port 62465 anticipated, but 0
26/03/16 10:24:01, racoon 436 [2580]: port 62465 anticipated, but 0
26/03/16 10:24:01, 463 raccoon [2580]: IKEv1 Phase 1 AUTH: success. (Initiator, aggressive-Mode Message 2).
26/03/16 10:24:01, 463 raccoon [2580]: > > > > > status of phase change = Phase 1 began with a peer
26/03/16 10:24:01, 463 raccoon [2580]: > > > > > status of phase change = Phase 1 began with a peer
26/03/16 10:24:01, 463 raccoon [2580]: IKE Packet: receive a success. (Initiator, Aggressive Mode 2 message).
26/03/16 10:24:01, 463 raccoon [2580]: initiating IKEv1 Phase 1: success. (Initiator, aggressive Mode).
26/03/16 10:24:01, 463 raccoon [2580]: IKE Packet: forward the success. (Initiator, Aggressive Mode 3 message).
26/03/16 10:24:01, 463 raccoon [2580]: IPSec Phase 1 established (initiated by me).
26/03/16 10:24:01, 463 raccoon [2580]: IPSec Phase 1 established (initiated by me).
26/03/16 10:24:01, 484 raccoon [2580]: IPSec Extended requested authentication.
26/03/16 10:24:01, 484 raccoon [2580]: IPSec Extended requested authentication.
26/03/16 10:24:01, nesessionmanager 485 [2112]: IPSec asking extended authentication.
[26/03/16 10:24:01, 494 nesessionmanager [2112]: NESMLegacySession[$VPN-CONN-NAME:B7816CCC-2D2C-4D6D-83D9-B2C8B6EB8589]: status changed by disconnecting
26/03/16 10:24:01, 495 nesessionmanager [2112]: IPSec disconnection from the server $VPN_SERVER_IP
26/03/16 10:24:01, racoon 495 [2580]: IPSec disconnection from the server $VPN_SERVER_IP
26/03/16 10:24:01, racoon 495 [2580]: IPSec disconnection from the server $VPN_SERVER_IP
26/03/16 10:24:01, racoon 495 [2580]: IKE Packet: forward the success. (Information message).
26/03/16 10:24:01, racoon 495 [2580]: IKEv1-Information Notice: pass success. (Delete the ISAKMP Security Association).
26/03/16 10:24:01, racoon 495 [2580]: could not send message vpn_control: Broken pipe
26/03/16 10:24:01, racoon 495 [2580]: could not send message vpn_control: Broken pipe
[26/03/16 10:24:01, 496 nesessionmanager [2112]: NESMLegacySession[$VPN-CONN-NAME:B7816CCC-2D2C-4D6D-83D9-B2C8B6EB8589]: status changed to offline, last stop reason no
26/03/16 10:24:01, racoon 496 [2580]: glob found no match for the path "/ var/run/racoon/*.conf".
26/03/16 10:24:01, racoon 496 [2580]: glob found no match for the path "/ var/run/racoon/*.conf".
26/03/16 10:24:01, racoon 496 [2580]: IPSec disconnection from the server $VPN_SERVER_IP
26/03/16 10:24:01, racoon 496 [2580]: IPSec disconnection from the server $VPN_SERVER_IP
$VPN_SERVER_IP
II. new VPN connection using L2TP over IPSec Console app log:
26/03/16 10:37:26, 293 com.apple.preference.network.remoteservice [2539]: CGContextSetFillColorWithColor: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, 293 com.apple.preference.network.remoteservice [2539]: CGContextSetStrokeColorWithColor: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, 293 com.apple.preference.network.remoteservice [2539]: CGContextGetCompositeOperation: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, 293 com.apple.preference.network.remoteservice [2539]: CGContextSetCompositeOperation: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, 293 com.apple.preference.network.remoteservice [2539]: CGContextFillRects: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, 293 com.apple.preference.network.remoteservice [2539]: CGContextSetCompositeOperation: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, 293 com.apple.preference.network.remoteservice [2539]: CGContextClipToRect: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, 293 com.apple.preference.network.remoteservice [2539]: CGContextGetShouldSmoothFonts: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, 293 com.apple.preference.network.remoteservice [2539]: CGContextGetFontSmoothingStyle: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, 293 com.apple.preference.network.remoteservice [2539]: CGContextGetFontAntialiasingStyle: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextSetFontSmoothingStyle: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextGetCTM: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextGetDefaultUserSpaceToDeviceSpaceTransform: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextSaveGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextConcatCTM: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextSaveGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextDrawImages: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextRestoreGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextRestoreGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextGetCTM: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextGetShouldSmoothFonts: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextGetFontSmoothingStyle: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextSetFontSmoothingStyle: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextSetFontSmoothingStyle: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextGetCTM: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextGetDefaultUserSpaceToDeviceSpaceTransform: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextSaveGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, com.apple.preference.network.remoteservice [2539 295]: CGContextConcatCTM: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextSaveGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextDrawImages: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextRestoreGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextRestoreGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextGetCTM: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextGetCTM: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextGetDefaultUserSpaceToDeviceSpaceTransform: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextSaveGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, com.apple.preference.network.remoteservice [2539 295]: CGContextConcatCTM: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextSaveGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextDrawImages: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextRestoreGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextRestoreGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextGetCTM: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:28, [2539 339] com.apple.preference.network.remoteservice: error in CoreDragRemoveTrackingHandler:-1856
26/03/16 10:37:28, [2539 339] com.apple.preference.network.remoteservice: error in CoreDragRemoveReceiveHandler:-1856
26/03/16 10:37:28, com.apple.xpc.launchd [1 393]: (com.apple.SystemUIServer.agent [2346]) Service was released due to the signal: Broken pipe: 13
26/03/16 10:37:28, Spotlight 461 [459]: spot: logging agent
26/03/16 10:37:28, [2539 487] com.apple.preference.network.remoteservice: service - area of the one error ERROR = NEConfigurationErrorDomain Code = 9 "configuration is unchanged" UserInfo = {NSLocalizedDescription = configuration is unchanged}
26/03/16 10:37:28, [2539 487] com.apple.preference.network.remoteservice: service - area of the one error ERROR = NEConfigurationErrorDomain Code = 9 "configuration is unchanged" UserInfo = {NSLocalizedDescription = configuration is unchanged}
26/03/16 10:37:28, nesessionmanager 519 [2112]: NESMLegacySession [VPN_CONN_NAME$: 04c 10954-16 b 2 - 40BB - B3F1 - 9288F968029E]: received an order to start com.apple.preference.network.re [2539]
26/03/16 10:37:28, nesessionmanager 519 [2112]: NESMLegacySession [VPN_CONN_NAME$: 04c 10954-16 b 2 - 40BB - B3F1 - 9288F968029E]: changed to connecting status
26/03/16 10:37:28, com.apple.SecurityServer [75 536]: rules of problem opening the file "/ etc/authorization ': no such file or directory
26/03/16 10:37:28, com.apple.SecurityServer [75 536]: sandbox has denied authorizing the right "system.keychain.modify" customer "/ usr/libexec/nehelper" [184]
26/03/16 10:37:28, 536 pppd [2616]: NetworkExtension is the controller
26/03/16 10:37:28, 538 pppd [2616]: NetworkExtension is the controller
26/03/16 10:37:28, nehelper 540 [184]: 10954-16 b 2 - 40BB - B3F1 04c - 9288F968029E: cannot copy content, returned SecKeychainItemCopyContent user interaction is not allowed.
26/03/16 10:37:28, nehelper 540 [184]: 10954-16 b 2 - 40BB - B3F1 04c - 9288F968029E: SecKeychainItemFreeContent returned the user interaction is not allowed.
26/03/16 10:37:28, 570 pppd [2616]: password not found in the system keychain
26/03/16 10:37:28, 572 pppd [2616]: publish_entry SCDSet() failed: success!
26/03/16 10:37:28, 573 pppd [2616]: publish_entry SCDSet() failed: success!
26/03/16 10:37:28, 573 pppd [2616]: pppd 2.4.2 (Apple version 809.40.5) started by $VPN_SERVER_USER, uid 501
26/03/16 10:37:28, SystemUIServer 620 [2615]: [BluetoothHIDDeviceController] EventServiceConnectedCallback
26/03/16 10:37:28, SystemUIServer 620 [2615]: [BluetoothHIDDeviceController] EventServiceDisconnectedCallback
26/03/16 10:37:28, authd 720 [124]: copy_rights: _server_authorize failed
26/03/16 10:37:28, sandboxd 748 [120]: nehelper (184) ([184]) refuse the authorization-right-get system.keychain.modify
III. New connection of Cisco VPN through IPSec Console app log:
26/03/16 10:18:26, 917 WindowServer [172]: _CGXRemoveWindowFromWindowMovementGroup: 0x10d of window is not attached to the window 0x10f
26/03/16 10:19:43, 975 WindowServer [172]: _CGXRemoveWindowFromWindowMovementGroup: 0x10d of window is not attached to the window 0x10f
[26/03/16 10:19:56 nesessionmanager 265 [2112]: NESMLegacySession[$VPN-CONN-NAME:72874CC0-2A89-4B61-80F1-9BB4F3EA953B]: received an order to start SystemUIServer [2346]
[26/03/16 10:19:56 nesessionmanager 265 [2112]: NESMLegacySession[$VPN-CONN-NAME:72874CC0-2A89-4B61-80F1-9BB4F3EA953B]: changed to connecting status
26/03/16 10:19:56, nesessionmanager 267 [2112]: IPSec to connect to the server $VPN_SERVER_IP
26/03/16 10:19:56, nesessionmanager 270 [2112]: phase 1 of the IPSec from.
26/03/16 10:19:56, authd 284 [124]: copy_rights: _server_authorize failed
26/03/16 10:19:56, 295 raccoon [2576]: agreed to the takeover of vpn connection.
26/03/16 10:19:56, 295 raccoon [2576]: agreed to the takeover of vpn connection.
26/03/16 10:19:56, 295 raccoon [2576]: IPSec to connect to the server $VPN_SERVER_IP
26/03/16 10:19:56, 295 raccoon [2576]: IPSec to connect to the server $VPN_SERVER_IP
26/03/16 10:19:56, racoon 296 [2576]: connection.
26/03/16 10:19:56, racoon 296 [2576]: IPSec Phase 1 started (initiated by me).
26/03/16 10:19:56, racoon 296 [2576]: IPSec Phase 1 started (initiated by me).
26/03/16 10:19:56, racoon 308 [2576]: IKE Packet: forward the success. (Initiator, Aggressive Mode 1 message).
26/03/16 10:19:56, racoon 308 [2576]: > > > > > status of phase change = Phase 1 began by us
26/03/16 10:19:56, racoon 308 [2576]: > > > > > status of phase change = Phase 1 began by us
26/03/16 10:19:56, 352 raccoon [2576]: no message must be encrypted, 0x14a1, side 0 status
26/03/16 10:19:56, 352 raccoon [2576]: no message must be encrypted, 0x14a1, side 0 status
26/03/16 10:19:56, nesessionmanager 352 [2112]: Controller IPSec: IKE FAILED. phase 2, assert 0
26/03/16 10:19:56, nesessionmanager 353 [2112]: Controller IPSec: retry the aggressive mode IPSec with DH group 2
26/03/16 10:19:56, nesessionmanager 373 [2112]: phase 1 of the IPSec from.
26/03/16 10:19:56, 374 raccoon [2576]: IPSec to connect to the server $VPN_SERVER_IP
26/03/16 10:19:56, 374 raccoon [2576]: IPSec to connect to the server $VPN_SERVER_IP
26/03/16 10:19:56, 374 raccoon [2576]: connection.
26/03/16 10:19:56, 374 raccoon [2576]: IPSec Phase 1 started (initiated by me).
26/03/16 10:19:56, 374 raccoon [2576]: IPSec Phase 1 started (initiated by me).
26/03/16 10:19:56, racoon 376 [2576]: IKE Packet: forward the success. (Initiator, Aggressive Mode 1 message).
26/03/16 10:19:56, racoon 376 [2576]: > > > > > status of phase change = Phase 1 began by us
26/03/16 10:19:56, racoon 376 [2576]: > > > > > status of phase change = Phase 1 began by us
26/03/16 10:19:56, racoon 404 [2576]: port 62465 anticipated, but 0
26/03/16 10:19:56, racoon 404 [2576]: port 62465 anticipated, but 0
26/03/16 10:19:56, racoon 432 [2576]: IKEv1 Phase 1 AUTH: success. (Initiator, aggressive-Mode Message 2).
26/03/16 10:19:56, racoon 432 [2576]: > > > > > status of phase change = Phase 1 began with a peer
26/03/16 10:19:56, racoon 432 [2576]: > > > > > status of phase change = Phase 1 began with a peer
26/03/16 10:19:56, racoon 432 [2576]: IKE Packet: receive a success. (Initiator, Aggressive Mode 2 message).
26/03/16 10:19:56, racoon 432 [2576]: initiating IKEv1 Phase 1: success. (Initiator, aggressive Mode).
26/03/16 10:19:56, racoon 432 [2576]: IKE Packet: forward the success. (Initiator, Aggressive Mode 3 message).
26/03/16 10:19:56, 433 raccoon [2576]: IPSec Phase 1 established (initiated by me).
26/03/16 10:19:56, 433 raccoon [2576]: IPSec Phase 1 established (initiated by me).
26/03/16 10:19:56, racoon 453 [2576]: IPSec Extended requested authentication.
26/03/16 10:19:56, racoon 453 [2576]: IPSec Extended requested authentication.
26/03/16 10:19:56, 454 nesessionmanager [2112]: IPSec asking extended authentication.
[26/03/16 10:19:56, nesessionmanager 464 [2112]: NESMLegacySession[$VPN-CONN-NAME:72874CC0-2A89-4B61-80F1-9BB4F3EA953B]: status changed by disconnecting
26/03/16 10:19:56, nesessionmanager 464 [2112]: IPSec disconnection from the server $VPN_SERVER_IP
26/03/16 10:19:56, racoon 465 [2576]: IPSec disconnection from the server $VPN_SERVER_IP
26/03/16 10:19:56, racoon 465 [2576]: IPSec disconnection from the server $VPN_SERVER_IP
26/03/16 10:19:56, racoon 465 [2576]: IKE Packet: forward the success. (Information message).
26/03/16 10:19:56, racoon 465 [2576]: IKEv1-Information Notice: pass success. (Delete the ISAKMP Security Association).
26/03/16 10:19:56, racoon 465 [2576]: could not send message vpn_control: Broken pipe
26/03/16 10:19:56, racoon 465 [2576]: could not send message vpn_control: Broken pipe
[26/03/16 10:19:56, nesessionmanager 465 [2112]: NESMLegacySession[$VPN-CONN-NAME:72874CC0-2A89-4B61-80F1-9BB4F3EA953B]: status changed to offline, last stop reason no
26/03/16 10:19:56, 466 raccoon [2576]: glob found no match for the path "/ var/run/racoon/*.conf".
26/03/16 10:19:56, 466 raccoon [2576]: glob found no match for the path "/ var/run/racoon/*.conf".
26/03/16 10:19:56, 466 raccoon [2576]: IPSec disconnection from the server $VPN_SERVER_IP
26/03/16 10:19:56, 466 raccoon [2576]: IPSec disconnection from the server $VPN_SERVER_IP
It seems that I solved the problem, but I'm not sure it helped.
After restart of the operating system, the two connections: old and new Cisco via IPSec connection, began to work.
-
Unable to connect to the domain of Tuxedo
Hello
I sent a cloned cartridge of peoplesoft with the list of domains. These areas have created the PS_AppServer Agents that don't collect data because of this message "unable to connect to the domain of smoking: ELMPRD5 ' with message id:"PS_ASRV_212 ".
I checked the path of smoking and also set the symbolic link, but still its not to collect the data.
Could someone help me on this issue as soon as POSSIBLE.
Kind regards
Shiva G
The most likely cause of this problem is discussed in the 45907 Knowledge Base article, which relates to additional measures to be taken if the start agents PS_AppServer Manager Agent is running as non-root.
Kind regards
Brian Wheeldon
-
Error network [10061]: unable to connect to the server
Hello
I use version 11.1.1.3 to Hyperion. I'm not able to start the Essbase Server services after you restart the server and get the error message below when trying to connect to the Regional service. Other Foundation services are running.
Error:"Network error [10061]: unable to connect to the server." The customer has expired waiting to connect to Essbase Agent using the TCP/IP protocol. Check your network connections. Also, make sure that the values for server and port are correct. »
Is this issue related to the corruption of Essbase security files? Please could you help me solve this problem.
Thank you
Michel K
Yes... Essbase security file is corrupted. I have restored back file and be able to start the Essbase Server services.
This is the second time I'm getting this question in the last week. Please could you let me know the reason of corruption of Essbase security files.
Thank you
Michel K
-
vCenter Server displays the error message: unable to connect to the host
vCenter Server displays the error message: unable to connect to the host
Symptoms
• vCenter Server cannot connect to a host when you perform operations such as:
•
o Storage vMotion
o cold migration
o cloning a virtual machine
o the model deployment
• Newspapers vpxd that contains an entry similar to:
[2009-06-04 19:27:16.326 error "App" 4444] [VpxdInvtHost] IP address change for 10.223.122.143 to 10.223.127.197 unhandled, verification of the SSL certificate is not enabled.
• You see errors similar to:
Unable to connect to the host o
o [2009-06-04 19:27:09.952 'Libs' 3902384 WARNING] [NFC ERROR] NfcNewAuthdConnectionEx: unable to connect to peer (numRetries = 2). Error: Unable to connect to the host 10.223.122.143: connection timed out
• vCenter Server shows the VMS as being disconnected then connected.
Hello
Resolution
Cause
This problem can occur if an ESX host's IP address is changed while being managed by vCenter Server.
Check the cause
To check the cause of the problem:
- Log in as root to the ESX host using a SSH client.
- In the file etc/opt/vmware/vpxa/vpxa.cfg, find the IP address of the host. The entry looks like:
10.21.48.121
Note: for more information about editing the files, see installation in VMware ESX configuration files (1017022).
Troubleshooting
If the IP address is incorrect, perform the following steps in order. If the operation does not resolve the problem, continue to the next step. Don't skip a step.
- Disconnect and then reconnect the host:
- Right click on the ESX host in vCenter Server and click Disconnect.
- Reconnect the ESX host in vCenter Server.
- Restart the VirtualCenter agent on the ESX host:
- Stop the service of vpxa with the command:
# service vmware-vpxa stop
- Open the /etc/opt/vmware/vpxa/vpxa.cfg file in a text editor and correct the IP address of the ESX host.
- Start the service of vpxa with the command:
# service vmware-vpxa start
Note: for VMware ESXi, you may have to restart all the management agents. For more information, see restart the agents on an ESX or ESXi Server (1003490) management .
- Rebuild the VirtualCenter agent on the ESX host configuration file:
Attention: this step removes all the Statistics counters historical host and the virtual machine. If VMware ESX host is running in virtual machines that starts in a permitted CVS environment, you maybe won't be able to add the host without stopping the virtual machines first.
- Right click on the ESX host in vCenter Server and click Disconnect.
- Remove the ESX host disconnected from vCenter Server.
- Backup the file vpxa.cfg with the command:
# mv /etc/opt/vmware/vpxa/vpxa.cfg /etc/opt/vmware/vpxa/vpxa.oldcfg
- Add the ESX host disconnected to the server vCenter inventory.
- Run the following command to view the contents of /etc/opt/vmware/vpxa/vpxa.cfg and confirm that the host IP address is correct:
# cat /etc/opt/vmware/vpxa/vpxa.cfg
-
cable card failure / Unable to connect to the internet
Pavilion a1600n windows 7 all of a sudden unable to connect to the internet. Agent at verizon (on computer) home says card wired to computer failed. Wireless still works on the laptop so is this right?
Hmmm... If the connection is just stopped one day of work or it didn't work after installing or uninstalling something?
I wonder if you do not have a card/port that has stopped working. The good thing is ethernet cards are fairly inexpensive and easy to replace. You could even go wireless and just buy a USB wireless receiver.
-
Unable to connect to the network "\\localmachine\sharedname" share
I use VMware vCenter Converter Standalone client, v5.0.0 build-470252, running on a 64-bit Windows 7 computer, try to import a Windows 2008 computer virtual (hosted by VMWare infrastructure) on my local machine.
At the start of the converter, I have "connecting to a local server.
Specification of the source system is OK, even if I don't know the certificate error. The conversion wizard installs his agent and it connects OK.
To the Destination System, I said:
Type of destination: VMware Workstation or other virtual machines to VMware
Product VMware: VMware Workstation 8.0.x
Information on the virtual machine:
Name: same as the source system, such as detected by the converter
Location for the virtual machine: \\localmachine\sharedfoldername
Username and password: my Windows 7 credentials, with full control over \\localmachine\sharedfoldername, the action and the underlying folder."When the converter checks the destination settings, it is reported: unable to connect to the network"\\localmachine\sharedfoldername"share
So far the measures of investigation:
-Connection to the share through Windows Explorer works fine; It is possible to write to the share-J' tried specifying the share as '\\localhost\sharedfoldername', but get "the share specified network 'localhost\sharedfoldername' does not exist." It was a bit of a long shot, I guess, but the form does not work in Windows Explorer.
-Have you tried with the file and print sharing both power - on and off seemed worth a try after looking at other posts on this forum
The help says 'If you are connected to a local Converter Standalone Server, providing a network path or a local path to the destination directory'. I tried the local path "C:\Virtual Machines\sharedfoldername", but got the message "error: specified as a (local) drive Destination.» "Please specify a UNC path such as: \\machine\sharename.
Aid also States "You have not to provide user credentials if the location is on the local storage of the machine where Converter Standalone server running." However, the next button is always disabled until credentials are provided.
Can anyone help please?
You must be able to access the \\localmachine\sharedname of the * SOURCE * machine. The job of conversions P2V of Windows is to install an agent on the source, then the agent connects to the target (this is why it must be on a network share) and transfers the data. You can browse \\localmachine\sharedname of the source (but not where the converter is installed)?
-
We get this error when running upgrade wizard at level for ODI 11.1.1.1.6.
UPGAST-00155] [update. Framework] [tid: 11] [ecid: 0000K8ft44ECcpGLIy9Dif1IUS8Z000002, 0] unable to connect to the account of the ODI supervisor: SUPERVISOR.
A given SUPERVISOR/SUNOPSIS for credentials in the user interface
Is there a file where the password is cross checked and need a change. Please advice
You can follow the steps below to update the supervisor password
use file encode.bat available in the location of oracledi\agent\bin
Encode
then run the following update query.
UPDATE SNP_USER SET PASS ='
' WHERE WUSER_NAME = "CONTROLLER"; Chantal
Maybe you are looking for
-
How can I remove and Correo electronico of thunderbird?
I tried to download my Thunderbird e-mail address, but the spelling of the field was wrong. I then added the e-mail account with a name correctly spelled. Now I have two e-mail accounts and he keeps trying to connect with evil. I need to remove the a
-
Before last 'upgrade' to Firefox, I used to type any result page or the words in the URL bar and Firefox opens a Google (or whatever I chose as the default search in the options) to the words I typed.Now, I don't have a "default search", search on th
-
What is online.apple@cms.math.ca? a scam?
I received an email the email above with of a "receipt" of songs that I bought apparently. Here the bottom of the message, which looks like it came from Apple, there is a link problems with this transaction?If you did not authorize this transaction,
-
parallel configuration for-lopp is not possible
Hello I have problems running a parallel loop. The Task Manager indicates that 8% workload, showing that only one of the 12 runs. I need to process the image of a repertoire of about 20,000 (U16, grayscale) tiff images First of all, I thought that it
-
eMachines ET1331-40F built in card reader not working not
I have windows 7 Home premium 64-bit SP1 Seems that, after the latest updates of weeks MS resembles my 8 in 1 (?) card reader does not work. USB ports before work. I checked the Device Manager and under Universal Serial bus controllers, there is an u