parallel configuration for-lopp is not possible

Similar Questions

• Highway X8.2.2, Changing default SIP Port for B2B calls is not possible

  Much of community support.

  I 10.5.1 (SU1) of CUCM and X8.2.2 Expressway.

  I have configured without VPN Jabber and B2B based on the Document calls "CVD-CollabEdgeUsingBE6000 - Apr14.pdf.

  everything worked fine for months, but after the upgrade of the X8.2.2 Express way B2B calls are no more work.

  After troubleshooting, I found the following:

  the DSF Guide tells me to change the default Port to 5061 to 5560 B2B calls because 5061 is also used for the integration of Jabber.

  When I look at my record of wirekshark I see cucm tries to connect to the port 5560 expressway, but after sending a SYN packet, cucm receives a RST packet.

  When I change back to the port of 5560 to 5061, everything works well again for B2B, but of course encrypted calls Jabber connection is not possible more.

  for me, it looks like a bug, but I found nothing on the 'Bug search' tool.

  I also tried to disable all Protection rules and I also have a firewall rule for Port 5560. I also tried to change the TCP Port to something different, 3999 for example. All this without success.

  Just a little look in the guide.

  Two caveats. First thing the guide explains unencrypted SIP - TCP connections, if you want to be aware that both sides use TCP or TLS. If you are using TLS certificates must be good as well.

  5560 isn't a port on the highway, this is the port for the trunk on CUCM.

  What do you see CUCM sending to Highway: 5560 Setup is not ok.

  The port of the highway will not be changed.

  If you look at page 30, he 5560 port is used for the "incoming Port *" and the bottom of page 31

  You can see that it uses the Expressway IP with port 5060.

  On the highway, you configure the area to port 5560 (page 34)

  And of course the firewall should also be ok.

  Please note messages posted under the stars below and set the thread if it's an answer!

• Attachment Applets error "this applet has not been configured for printing.

  I am a fairly new disorder configurator and have with our applets attachment returns an error that the applet has not configured for printing. I also receive this on an output of the cmdlet to the box.
  
  It occurs when you try to use the print feature in the application of sub menu bar file. I did a bit of "Googling" to find a cause and watched in the 8.2 shelf and find nothing. The only one I found said that it was not possible?
  
  How does set the cmdlets for printing? Is it because the attachment is a file that has been downloaded? Is this something on the server and not actually in the application?
  
  Can someone point me in the right direction?
  
  Thank you in advance.

  Hello!

  The ability to print is determined by the class underlying the applet.

  If you want to print the contents of an attachment, you can open in any application is appropriate and feel from there. I don't think class applet of Siebel support print content attachments, assuming that's what you try to do.

  Kind regards

  mroshaw

• Despite my Gmail that is configured for IMAP and continually confirming that my login and my password are correct, that it will not find my account

  My e-mail and password are correct when I try to configure my mail in Thunderbird, but I always get the error message: Thunderbird could not find your e-mail account settings.

  I have also entered with Gmail and was assured that it is configured for IMAP

  Thank you.

• SP A10 - Error 633: the modem is not installed or configured for Dial-Up

  I've already reformatted the hard drive and the utility CD to reinstall the modem driver. Anyone got tips on how to solve the problem? An external modem would solve it?
  Either way, it's a satellite pro A10

  Hello

  If the HARD drive is formatted, use the recovery CD and reinstall the OS. After that, the modem must be recognized and properly installed. After that, configure Dial connection and check the modem. If the modem is not defective, it should work.

  The strange thing is that there is Error 633 which means: the port is already in use or is not configured for remote access remote calls.
  Please check this interesting site http://www.modemsite.com/56k/duns633.asp.
  If there is no success please write again.

  Good bye

• Tecra A7: Not possible to update driver display for Mobile catalyst 6.9

  I tried to update my display drivers for Mobile catalyst 6.9, but during the installation, I get this error annoing: "failure of the installation run installation: an error occurred during a seek operation.

  I tried to uninstall the old drivers and then installing the new, but I get the same error and I don't know the cause. A few days ago that everything works perfectly, so I guess it's a software I as causesc this problem.

  Help, please!

  Hello Vlad

  It is well known that on most new units is not possible to install the graphics drivers designed by graphics card manufacturers. He is always shown in Setup error as in your case. It's the material.

  Graphic driver Toshiba designed is a kind of sanitized version. Sorry, but I'm afraid there is nothing to do. You claim your previous assignment of fan performance. If this driver can be installed, I fear that this graphics card may be forced to run faster and produce more heat.

• DVD Windows media player cannot play this dvd because it is not possible to activate the ANALOG on the output display copy protection try to install a driver available for your video card

  When you try to play a dvd it (above) is displayed. Anyone know where I can be able to get a updated driver free for my video card, or in any other way to solve this problem. your help would be greatly appreciated. Thank you.

  When you try to play a dvd it (above) is displayed. Anyone know where I can be able to get a updated driver free for my video card, or in any other way to solve this problem. your help would be greatly appreciated. Thank you.

  =======================================
  What version of Windows are you using?

  The free VLC Media Player may be worth a try...

  It will play anything.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  VLC Media Player (32-bit Version)
  http://www.filehippo.com/download_vlc_32/
  (works on XP, Vista, 7, 8)
  (the name of the file to download is: vlc - 2.0.5 - win32.exe)

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  VLC Media Player (64-bit Version)
  http://www.filehippo.com/download_vlc_64/
  (works on XP, Vista, 7, 8)
  (the name of the file to download is: vlc - 2.0.5 - win64.exe)

  And the following links may be worth a visit:

  (2004673) Windows Media Player cannot
  read the DVD because it is not possible to
  turn on analog copy on the output protection
  view
  http://support.Microsoft.com/kb/2004673

  Windows Media Player cannot play the DVD because it is not
  possible to put on the protection against analog copying on the output screen
  http://www.Microsoft.com/windows/windowsmedia/player/Webhelp/default.aspx?&mpver=12.0.7100.0&ID=C00D1167&ContextId=61&OriginalID=C00D1167

• PIXMA PRO 10 can not configure for WiFi

  Everything works fine on USB key, but I can't seem to configure for WiFI. I am using the recommended network driver

  MP68-victory-mg3200-1_02 - ejs.exe

  but for some reason some it does not detect the network. I use Xfinity and have the router SMCD3GNV. I have a printer HP on WiFi but no luck with this one. I don't have the original CD that came with it I bought it used and the seller couldn't find. Is there a better network driver? Thanks, Jim

  Hi, Jim!

  Thanks for posting on our forum! This community is designed for Canon owners your colleagues help each other any problem they may encounter. If it is a question of time-sensitive, contact our technical support team at the United States is the most effective way to get these issues straightened. They are standing, ready to help you 24/7 by Email http://bit.ly/Canon-Support or by phone at 1-800-OK-CANON (1-800-652-2666) Monday to Friday between 10:00 and 10: 00, et (07:00 to 19:00 PT).

  Thank you and have a great day!

• Computer is not configured for Microsoft FixIt. Why not?

  Original title: when I try to use the hotfix program it won't work and it did until I get a reprt error saying that my computer settings are not configured for microsoft fixit program

  I get an error reprt back saying that my computer settings are not configured for microsoft fixit program

  Hello

  ·         Who solve this running?

  ·         The problem occurs with all fix Microsoft?

  ·         Which exact issue are you facing with the computer?

  Some of the fixit tools are designed to work with specific operating system. If you try to run Windows 7 repair on Windows XP, it cannot run. Please provide us with more information about the issue so that we can help you further.

  If you are faced with the question with all Microsoft Fixit, you can post your query to Microsoft fix Center solution for better support.

  http://social.Microsoft.com/forums/en/fixitcenter/threads

• Try to connect to the network, get a msg "the server is not configured for transactions.

  I have a desktop running Vista Professional (SP2) and a laptop running XP Professional (SP3). They are connected by a WiFi network, the Desktp acting as a server. Everything worked well until the Office had a problem and had to have re-installed Windows. Now, although the Office can find the laptop, the laptop can not find the office or its working group. I get a message " is not accessible. You might not have permission to use this network resource. Contact the server administrator to find out if you have access permissions. The server is not configured for transactions. »

  • But once, for about five minutes, it worked - and then stopped again. For no apparent reason.
  • If I connect with an Ethernet cable and no WiFi machines, the last sentence of this message changes to "the list of servers of this working group is currently unavailable."
  • When you run the Configuration Wizard from the network on the laptop, he told me that I have to run the Wizard "on each of the computers on your network. To run the wizard on computers running XP, you can use the Windows XP CD or a network setup disk". I was not able to do so - the XP disc I have does not behave as indicated by the wizard and the wizard does not recognize my CD - RW drive to create a network setup disk.

  Can anyone help?

  Well, who has not responded to my problem, but it was eventually fixed by a support guy with the company who sold me the desktop PC. As I understand it, it was a problem of file sharing. Seems he had to undo sharing all my records on the desktop, then re - share once again, since when I did not have this particular problem. But it's obviously not ideal (in MS eyes at least) to the network of computers with different operating systems.

• RV180W [IKE] ERROR: did not find configuration for

  I have 1 or 2 of these messages per week.

  Fri Sep 11 15:14:30 2015 (GMT + 0000): [*] [IKE] ERROR: did not find configuration for 85.25.43.94 [60105]

  I have not any clients VPN active so do not know why I get these other than intrusions attempts.

  Hello

  You have tunnels VPN site-to-site configured in the router?

  .:|:.:|:. CISCO | Russ Wyatt | Network engineer | Cisco technical support | [email protected] / * /

• Outer island, I have installed does not appear in 'my computer '. It has been configured for mac. How can I get that back to windows 7

  Outer island, I have installed does not appear in 'my computer '. It has been configured for mac. How can I get that back to windows 7

  What device?

  It appears in the Windows Device Manager?

• I changed my computer; in the former, I installed Adobe Acrobat 7 Pro. I installed the DVD this software in the new computer, the installed software apply for registration, and it is not possible online or by phone because I get an e

  I changed my computer; in the former, I installed Adobe Acrobat 7 Pro. I installed the DVD this software in the new computer, the installed software apply for registration, and it is not possible online or by phone because I get an error message: "Servicio de Activacion not available." I have download the acrobat 7.0 Pro software, following the instructions on the Adobe web site, and I download PPRO_2.0_Ret - NH_ES.zip, but the software has been Adobe Premier Pro, no. Adobe acrobat 7 Pro. How can I use my Adobe Acrobat 7.0 Pro?

  Download Adobe Acrobat 7 and Adobe Creative Suite 2

• I would like to stop my paid subscription to Adobe, the creative cloud because adobe does not work on my computer. In addition, it is not possible for me to stop my subscription on the site, because it does not show I have this subscription. That's why I

  I would like to stop my paid subscription to Adobe, the creative cloud because adobe does not work on my computer. In addition, it is not possible for me to stop my subscription on the site, because it does not show I have this subscription. That's why I need to helo, please, thanks :-)

  Hi Stephanie,

  Please let us know the problem you are having with your Adobe Creative cloud so that we can fix it for you.

  For cancellation requests, please contact customer service.

  Reference: cancel your creative cloud membership

  Kind regards

  Sheena

• Is - is no longer offers a basic remuneration for it and it's yours for as long as you want with no updates of Adobe?  All programs are now a subscription?  Is it really not possible more to pay only once and that the program without updates until what yo

  Is - is no longer offers a basic remuneration for it and it's yours for as long as you want with no updates of Adobe?  All programs are now a subscription?  Is it really not possible more to pay only once and the program without updates until you decide to improve?

  You can buy cs6, Creative Suite 6