Unable to connect to the printer, message error "module 126 is missing."

Similar Questions

• "Unable to connect to the printer operation was not successful"

  I use the operating system Win Xp I have the WiFi network and I can't connect to any shared printer on my computer. She has a massage error like
  "Unable to connect to the printer operation was not successful"
  Can you please help me solve this problem

  Thank you
  Ramil

  Hi RamilAnuja,

  ·         This is the first time that you connect a wireless printer?

  Method 1: See if you follow the steps as suggested here.

  Microsoft Windows XP - to connect to a printer on a network

  Method 2: Check to see if this article helps you.

  How to set up a wireless network (WLAN) in your home

  See also:

  Microsoft Windows XP - overview of network configurations

  Printer in Windows problems

• HP series D110: update Apple OS Sierra this morning. Now unable to connect to the printer HP series D110 to scan.

  Apple OS update Sierra 10.12 and now unable to connect to the printer to scan. Version of the driver for HP printer is HP inkjet 1 pilot 3.3.2 can someone help me?

  @Lancer3

  Welcome to the HP Forums, it's a great place to get help, find answers and advice,
  Thanks for posting your request, I'll be more than happy to help you

  If I understand correctly the printer to scan does not work after the recent update of the Sierra,

  Don't worry, even if the following document does not mention Sierra, the Apple article will guide you through the steps to scan through

  • Image capture
  • Overview
  • Printers and Fax preferences in system preferences
  • Scanner / printer queue

  The basics of the Mac: using a scanner

  I also suggest to use the Apple Scan while you wait for the HP software update. You can use the link below to confirm that your printer is still compatible with your operating system: software of the printer and scanner for macOS Sierra, El Capitan, Yosemite, and the Mavericks.

  For links related, please here.

  To troubleshoot the macOS Sierra problems: click here

  If the information I provided was useful, give us some reinforcements by clicking on the solution and laurels, buttons that help and others see that we have the answers!
  Good luck.

• Unable to connect to the printer via IP address

  I changed my ISP (internet service provider) and therefore changed routers - now unable to connect to the printer.
  I put a static IP address on my HP Photosmart B110a printer before we changed to ISP because there are connection problems. When we were setup to the ISP again, we are unable to connect to the printer, such as the printers IP 192.168.1.12
  The new network ISP IP range is 192.168.0.xx and printers address IP is out of the network.
  I can print via the USB cable but I can't return to my printers GUI by entering 192.168.1.12 return the printer back from the static IP address.
  A hard reset for this printer would be appreciated.
  Thank you very much.

  Hello
  I solved the problem. The answer was staring face heres so my solution for someone who has had similar problems.
  I didn't dig up the old router that affects the 192.168.1.xx IP network and then connected my PC, connected my printer then connected printers user interface through the static IP address, I assigned earlier. Changed to automatic IP. Connected my new router (which assigns the IP addresses of 192.168.0.xx) to my PC and printer. Everything is now OK.
  Thank you.

• HP Deskjet 3510: HP Deskjet 3510 - unable to connect to the printer

  I had this printer for some time but have never been able to properly print to this printer using this specific computer.   FYI, I'm trying to print wireless at it. This office has wireless compatibility.  I have the drivers and all (I think, I HP everything at the time but not the disk that came with it I lost only).  Don't know why it fails, he said only: "unable to connect to the printer.

  Thanks in advance for any help.

  Hi aunt Shirley.

  First of all, we're going to connect the printer to the network:

  -Restore default values of network within the menu on the front panel of the printer wireless.
  -From your computer, connect wirelessly to the network printer (it should be a name similar to HP - Setup - xx - Deskjet 3510).
  -After successfully connecting to the printer, open a web browser such as Internet Explorer or Chrome and type 192.168.223.1 in the address bar and press ENTER.
  -Click on the Wireless Setup Wizard
  -Select your router and enter the password to connect to the printer to the router.

  Run again the printer software to your computer to rediscover the printer on the network.

  See the support institution by clicking on the thumbs upwards in the post that solved your problem. Doing so will help the other members of the forum their solutions also.

• "Unable to connect to the printer. Operation failed with error 0 x 00000866", setting up a network printer

  Title of the Moose: error 0 x 00000866

  I have a laptop with windows 7 Professional.

  When I try to install a network printer I always get the message "cannot connect to the printer. Operation failed with error 0 x 00000866.

  What can I do to fix this

  Hi ETPM.

  You can try the following steps and check if it helps.

  Method 1:

  You can try to start troubleshooting printer and check.

  Check out the link:

  Open the printer Troubleshooter:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Method 2:

  Error message when you try to install a network printer on a Windows Vista-based computer: "Windows cannot connect to the printer operation cannot complete (error 0x0000000d).

  http://support.Microsoft.com/kb/947236

  Note: You can read this article and try to proceed as for Windows 7 also.

  Important: Serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow the steps in the link mentioned above carefully. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, follow the steps from the link below:

  http://Windows.Microsoft.com/en-us/windows7Back-up-the-registry

  Method 3:

  If the fix above is unable to get the printer working on your client machine to vista, so I suggest to follow the steps mentioned by Afzal Taher as of Friday, December 18, 2009 02:00.

  http://social.answers.Microsoft.com/forums/en/w7network/thread/954c4b9d-2F4C-4b1b-8fb6-49204ed96dfc

  Also check out the link:

  Install a printer:

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Unable to connect to the wireless network, error message "Windows could not finish repairing the problem because it is impossible to perform the following action. Renewal of your IP address.

  Original title: Unable to connect to the wireless network

  Unable to connect to the network wireless Toshiba Satellite A105 PC running Windows 7.  "Windows could not finish repairing the problem because it is impossible to perform the following action. Renewal of your IP address.  Works with Windows XP SP2, IE 8.00.6001.18702 file, I think that Version 3.  It has been installed on a disk provided by Microsoft after that old installation became corrupt (in the sense of Microsoft technical support.)  Before that, wireless network worked well.   (So unable to connect to the Internet for updates.)   Have tried to change the other settings and different messages acquired when it SHOWS that I am connected but cannot connect because of something to do with the certificate.  I don't remember what I did to try to solve this problem in the last days.

  I should add that I have tried the solutions of the previous forum on this topic, and none worked.

  Hi Marilynnla,

  Sorry to hear about the bad experience you encounter. Lets see if the network problem can somehow be archived.

  Read this article and follow the steps. Lets see if it helps in any way.

  How to troubleshoot wireless network connections in Windows XP Service Pack 2 (Works for Windows XP SP3 as well)

• Unable to connect to the Internet, receive error message: DEBUGER END WIRE.

  Original title: unable to connect to the Internet

  Hello

  I am using Dell inspiron 1525 with Win.Vista Home Premium 32 bit

  When I connect to internet I displays message DEBUGER CANCEL THREAD

  There is no driver problem

  Someone help me

  I thank & regard

  Satish Baker

  Hi Sissi,

   

  1. you are using a wired or wireless?

  2. do you and changes to the network card or manually change all the settings?

  3 when was the last time it worked?

  4. are you tring to set up internet connection in windows vista for the first time?

  Please follow the links below to solve the problem.

   

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

   

  See also this: the problems of Internet connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

   

  I hope this helps!

• Unable to connect to the printer 8500 A910

  When I first connect my printer to the router and install the printer driver on my computer, I can print documents. However, when I turn off and on the computer, the computer cannot connect to the printer (coz I can't print any documents) even if it is connected to the router.

  Anyone know how to fix this?

  Hi @Donald0812

  When you try to print, do you have an error message any? If so, what would you say?  While I wait for you, please complete the solutions proposed in the following 2;

  • Printer keeps no connection Wi - Fi
  • "Printer is off-line" Message appears on the computer and the HP printer does not print

  I hope this helps.

• I am unable to connect to the printer wirelessly to the computer.

  having problem connecting wireless laptop printer. any suggestions?

  Original title: can'tprint of the laptop computer using wireless

  Hi bill c w,.

  (1) this exactly happens when you try to connect to the printer?
  (2) that you get an error message or error code?
  (3) who is the manufacturer of the printer (with the numberof model )?
  (4) did you make changes on the computer?

  I would like more information about the issue.

  Method-

  Perform the steps in the article-

  Printer in Windows problems

  Network printer problems

  Note: applies to Windows 7 .

  Hope this helps!

• "Unable to connect to the Skype server" error on samsung wave 723

  I got Skype Lite (or the Java thing, whatever we call it - does not allow calls - only CAT) on my Samsung Wave 723 for more than six months. Earlier this week he suddenly disconnected me and when I tried to log in again it showed this error "Unable to connect to the server of Skype." almost immediately after, I started signing in. I tried to reset the settings in Skype, my phone settings, I took out the battery and reset even WiFi. Then I tried to connect with a few other WiFis - still the same error. My friend has the same version of Skype Lite on his cell phone, and it works very well and without errors.

  Anyone know how to fix this error? It is urgent, please.

  Solved the problem on my phone. I just had to add the area code to my phone number in the connection menu.

  @yousef8824: I downloaded my Skype Java one of those ages of links it is a. not useful at this time.

• Unable to connect to the printer wireless HP D110

  Bought a new printer D110 last week.  Turned on, it has detected my wireless router Actiontec (Verizon FIOS) with signal max, and I logged it, using my WPA key.  It appears that he successfully connected and returned a hard copy report indicating that he has passed all the tests, at the address IP 192.168.1.4, which is within my reach.

  However, when I told the installer to use wireless rather than in USB mode and entered the IP address assigned to the printer, she returned with a message that it cannot connect to the printer.

  I disabled all firewall and antivirus software and repeat this step again and again, same result.  It's on a laptop Toshiba Satellite brand new under Windows 7 Home Premium.  The laptop has had zero problems wireless in and of itself.

  I repeated the installation on a 8 years old Sony Vaio laptop running Windows XP Home Edition with all the latest service packs and updates.  Same result, failure.

  I checked the software admin to the router, checked that it has detected the printer and assigned to this address.  However, neither the router nor either laptop can ping the printer successfully.  Laptops can ping each other, and the router pings successfully.

  I went to USB mode and connected the printer to the new laptop.  Works very well.

  I'm guessing there's a permissions/firewall problem going on here.  I don't use MAC filtering.  I opened the port 427 incoming UDP activity.  No change.  Any help appreciated.  Thank you.

  You can try to run WIndows Update again and again to make sure that your system is the last and largest.

  Also, download the latest version of the software for your printer from the "Support & Driver" link at the top of this page.

• Unable to connect to the server Essbase (error #1051293)

  Hello

  Using Essbase Integration Services Consol, I created a template OLAP, and then click OLAP Metaoutline and even checked. But when I tried to load the members and the data I just had an error that is "unable to connect to the Essbase server: Localhost (error #1051293).

  If any of you have solution for this issue, so kindly help me.

  Saami

  Do you know who your security Admin? Or at least you have access to Shared service URL?

  In LDAP, type your user ID and you see your start-up. Add the new app to your user ID, and you define.

  Essbase Administration Services to help online

• Unable to connect to the host.   Error: The specified version is not found

  vmrun-t esx h https://192.168.1.123/SDK u root Pei password list

  Unable to connect to the host.

  Error: The specified version is not found

  Any ideas why it does not work?  It is run on a Windows XP workstation.  The target server is on the local network and running ESXi 4.1.  The vmRun version is 7.1.2 and is installed with Workstation 7.1.2.

  I also tried Ubuntu 10.04 with vmRun from a Workstation 7.1.2 installation.  There, he also fails with the same error.

  Note that ESXi 4.1 is used to test installation is not allowed and is running in demo mode.  Management of the vSphere client works without any problem the same Windows XP workstation.

  Any help would be appreciated.  Thank you.

  You must install the full package of VIX by http://communities.vmware.com/community/developer/downloads. It contains only components to manage the workstation. Please note that I had to install in the VIX 1.10.1 order then Workstation 7.1.2 to get both to work on my Windows 7 computer.

• Unable to connect to the MKS: internal error

  After you add the hosts to vCenter, when I try to KIKILA the VMRC, I get the error: could not connect to the MKS: internal error

  First of all, this isn't the usual DNS resolution of Host IP addresses MKS error! This is something totally different.

  An unusual thing in the manifestation of this problem which is to turn it off (completely off, not a reboot) and then turn the virtual machine in question, the console will work for this virtual machine, but the console continues to malfunction for the other virtual machines on the same host until these virtual machines are vMotioned or completely powered by bicycle!

  Here's the workflow:

  1. I have to stand up a new ESXi (patched and firmwared to the latest updates)
  2. I build a Windows or Linux VM to serve DNS and/or be an AD domain controller
  3. I have install the VCSA (or Windows vCenter)
     1. I connect and test forward and reverse the resolution for all hosts in the Broadcast domain
  4. I add the ESXi host (and all other hosts) to vCenter
  5. I try to open a VMRC and get the MKS error!

  It is a minor problem, with the exception of the VCSA himself!

  Any ideas?

  I had the same exact symptoms as you. Fortunately, I was able to find this link:

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=2116542

  Looks like we have a need is power off and turn it back on, suspend and energy back or vMotion to another host to resolve. I guess it has to do with the generation of a new SSL certificate when joining a host to vCenter? I checked that at least the first two options work, so I hope that answers your question.