Unable to connect to the internet, the TPM secure

Similar Questions

• T400: Error Message - there was a problem connecting to the TPM secure

  Hello

  I am a new user of ThinkPad. I just got my T400 a week ago, and I'm a fan of him immediately. But there's this little thing that really bothers me. The second day I used my laptop, I got this error message: "There was a problem connecting to the module of TPM (safety device) on this computer", and I got this message since that date, every time I turn on my laptop.  What it means? And how do I get rid of this error message? Thank you!

  Moderator Note: Type + error message added to the line object for clarity.

  go into the bios and check if the TPM secure is enabled or disabled in the BIOS. Make sure it's on. If the problem persists then call Lenovo, could be a hardware problem.

• HP Deskjet 3050 - unable to connect to the WPA secure wireless network

  Hello

  My first post here so please excuse any misstep on my part.  I bought this HP Deskjet 3050 a week ago and have since been war with it.  I would be really grateful if someone could possibly give advice on how I can solve this problem.

  I am unable to connect the printer to my secure wireless network, even if the other computers, cell phones, etc. are connected without problem.  I tried WPA, WPA2 and WPA2-Mixed modes with the same failure security. Specifically, the 66% reached Connection Wizard, then displays the error that the wizard can not find/network printer.  If I disable the security, the printer connects very well.

  I use a Linksys WRVS4400N router with firewall and associated firewall disabled settings.  The router broadcasts on 802. 11 g / N mixed mode.

  I install the software provided on the CD for installation on a Windows XP SP3 System.  I confirmed that the PC and the printer are connected to the network are the same.

  The issue as well, if you will allow me: I have not yet tried these drivers, but I see there are any updated drivers for the printer in date from 14/12/2010.  The release notes indicate the improvement of networks, but do not develop beyond that.  Does anyone know if there was a known problem with the connection to secure networks that has now been corrected?

  Finally, just a note that I am partially blind and using a screen on all systems reader.  I'll try my best to be as helpful as I can to please forgive me if I can't find the settings, etc. on screen and sometimes need help for a little more detail.

  Thanks in advance for your help, I really enjoyed.

  Have a nice day,

  All the best for now and take care,

  Hussein.

  It is not the fact that it is impossible, is the fact that this was not done, yet.

  Hello

  first of all, my apologies for the delay getting back to you.  Poor health means that I had little time or want to do great thing on the side of the computer of htings.

  In any case, I am please to say the problem with the HP 3050 failing to connect to my network is now resolved.  There seems to be a bug with the installer, and that seems to include the version the most recent publication Dec 2010.

  To resolve this problem, I did the following:
  1. disable all security for the network options, so it's just an open network.
  2. connect the HP 3050 to the network by using the installation wizard. This time it connected OK for me.
  3. Locate the IP address of the printer.  I used the table of customer list accessed by my router interface. You may be able to get this through the printer on the menu screen, but as I am partially blind, it wasn't an option for me.
  4. Enter the control panel of the printer to http://ip.address.of.printer for example http://192.168.2.108
  5. under Advanced options, configure the network settings, including the password and the Security Protocol.  Don't forget to enter the SSID of the network exactly as it is configured on the router.
  6. apply settings, disconnect from the control panel of the printer.
  7 log in the router configuration panel and re-apply the security options.  Make sure they match these match those entered for the printer.

  I hope it will be useful to others in the same position.

  Thanks again for your time.

  Best,

  H.

• Unable to connect to the internet update version

  I've updated to the latest version 35, but since then, the browser seems unable to connect to the internet. I thought it was my firewall that was blocking the program. I did what was suggested to work around this problem, that is, to remove my firewall and then add it again. But it does not solve the problem. There is nothing wrong with my internet, how am I be able to connect to internet by using IE or Chrome. And I was able to connect to the internet in the previous version of Firefox. Unfortunately, the new updated version is not allow me to. Have no solution?

  It is possible that your security (firewall, antivirus) software blocks or limit Firefox or the process of plugin-container without you inform, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox and the plugin-container in the permissions list in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.org/KB/server+not+found
  • https://support.Mozilla.org/KB/firewalls

• Satellite Pro A10 - WXP re-installed and unable to connect to the internet

  Please help me... I have re-installed Windows XP Home... and now unable to connect to the internet... have also not more of her!
  I went into the Device Manager... in 'other devices' - and it is yellow? mark beside...
  1 / ethernet controller. 2 / multimedia audio controller 3 / PCI modem controller 4 / video...
  They all say "drivers for it are not installed. .... Also, went to "system devices" and find 9 other things that no longer have the drivers installed... said there is also no "audio device" installed!

  My laptop is completely exhausted, or it is better to try to resolve this issue. I'm a fool when it comes to stuff like that... so be gentle with me... what I need to find all the individual drivers and re - install...? BTW... There is no wireless card in the back... (Already checked)...

  Would appreciate any help...
  Thank you

  Hello

  Satellite A10 is a little older model laptop and you can find the drivers in * archives *. go to the [page driver Toshiba | http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp]

  Archive-online Satellite Pro-online Satellite Pro A series-online Satellite Pro A10

  > / ethernet controller. 2 / multimedia audio controller 3 / PCI modem controller 4 / video

  Download and install: 1) Lan Card 4) graph of the card sound 2) 3) Modem driver download also, other drivers if necessary.

• Satellite Pro L510 - unable to connect to the Internet

  Hi, a newbie on this forum so here goes. I got the "fix Windows 7" virus on my laptop because my virus protection that flows. I downloaded AVG which solved some problems, but still not back to the original values. I reloaded Windows 7, but of course I lost all the software preloaded Toshiba & now cannot connect to the internet (laptop computer purchased through the catch of the day).

  What I need to download software/drivers toshiba etc. to address this problem. Thanks for any input.

  Hello

  > now unable to connect to the internet
  Can you write more than one sentence about your problem?

  Does anyone know how you connect to the Internet via modem, LAN or WLAN? More exactly, what happens if you want to connect, you an error message or probably t can find the router?

  Sorry, but without this information there s no end of discussion

• Satellite L300-1 a 6 - unable to connect to the internet

  I have a problem - unable to connect to the Internet.

  First of all, I try to use internet DSL from phone, there was no result.

  Then I try to use digital TV internet - no result.

  Laptop does not detect a network, it says - undefined network.

  My firewall is active, now I use a modem to laptop...

  Sorry, but I don't understand how you have configured your DSL router/modem.

  First of all, you need to configure the router and need to insert all the data from your ISP (Internet service provider).
  Usually the model or DSL with router assigns the IP address. Therefore, only connect your LAN cable to the LAN books and you should get a connection to the DSL router/modem.

  I think that in most cases the whole process is described in the manual of the router

• Unable to connect to the internet via ethernet.

  Unable to connect to the internet via ethernet.

  You have published a statement... is not an issue. You have a question?

  Do you mean that you try to use Ethernet for Internet connection? OR are you asking how to connect to Internet if Ethernet is not possible?

• Reinstalled XP and now unable to connect to the internet, dsl provider says the leaves to reinstall the connection LAN how fix this?

  Original title: windows xp.

  reinstalled xp and now unable to connect to the internet, dsl provider says the leaves to reinstall the connection LAN how fix this?

  Hello

  Go to the website of your computer manufacturer > drivers download Section > put your computer model number > operating system > Search adapter network, pilots etc. for her.

  Get graphics, sound while you're there.

  You should always do a reinstallation.

  Use the computer that you use to make the foregoing > download and save in this office > copy of Flash Drive > then install in another computer.

  See you soon.

• Dell Inspiron 2650-system of operating Windows XP. I am unable to connect to the internet. Status: Network cable unplugged. Where did this cable located on the laptop?

  I have a Dell Inspiron 2650-system of operating Windows XP.  I am unable to connect to the internet.  Status: Network cable unplugged.  Where did this cable located on the laptop?

  I have a Dell Inspiron 2650-system of operating Windows XP.  I am unable to connect to the internet.  Status: Network cable unplugged.  Where did this cable located on the laptop?

  The network port is the port on the laptop (it is not that large - look around) that looks like a large phone connection.

  You have a router/network to connect to and a cable network to connect with?

  Look at the 'Network option' part of the poster:
  http://support.Dell.com/support/eDOCS/systems/ins2600/placemat1.PDF

• Unable to connect to the internet ERROR 678

  original title: Please help me because I get ERROR 678 frequently

  I use a broadband connection on my desktop pc with windows XP SP3, as I tried to connect through windows running phone 7 ultimate, but I was unable to connect to the internet, now even once, I plugged the cable broadband for desktop pc and now I get ERROR 678 , after several attempts to recall that I am able to connect through desktop pc. I have met it 2nd time to do the same procedure for the first time he resolved automatically, but now there's a problem. also contacted the service provider as their laptop to connect to internet with my account but I can't my pc... HELP ME PLEASE...

  Hi Aniketpawar,

  ·         What security software is installed on your computer?

  I suggest you to follow the steps in the Microsoft Knowledge Base article and check.

  You may receive error 678 or error 769 when you try to connect to the Internet or when you try to browse the Internet after you install Windows XP Service Pack 2

   http://support.Microsoft.com/kb/892889

  Let us know if that helps.

• After a virus, I am unable to connect to the internet. Event log messages: the NetBios over TCP/IP service failed to start due to the following error...

  original title: NETBios TCPIP of missing in Device Manager

  I recently had to run two antivirus programs on an infected computer and am now unable to connect to the internet. When I went to the event viewer, I noticed the following error messages:

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7000

  Date: 16/01/2012

  Time: 12:31:17

  User:                       N/A

  Computer: JARRIOUSSTUDIO

  Description:

  The NetBios over TCP/IP service failed to start due to the following error:

  The service cannot be started, either because it is disabled or because it has no enabled devices is associated to him.

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7001

  Date: 16/01/2012

  Time: 12:31:17

  User:                       N/A

  Computer: JARRIOUSSTUDIO

  Description:

  The DHCP Client service depends on the NetBios over TCP/IP service which failed to start because of the following error:

  The service cannot be started, either because it is disabled or because it has no enabled devices is associated to him.

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7001

  Date: 16/01/2012

  Time: 13:32:01

  User:                       N/A

  Computer: JARRIOUSSTUDIO

  Description:

  The DHCP Client service depends on the NetBios over TCP/IP service which failed to start because of the following error:

  A device attached to the system does not work.

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7001

  Date: 16/01/2012

  Time: 13:32:01

  User:                       N/A

  Computer: JARRIOUSSTUDIO

  Description:

  The helpdesk TCP/IP NetBIOS depends on the NetBios over TCP/IP service which failed to start because of the following error:

  A device attached to the system does not work.

  When I look in the Drivers folder, I see netbt, but devices & Non Plug and Play Devices, of TCPIP NETBios is not listed in Manager.

  Hi Diddy Dell,

  Follow these methods.

  Method 1: Performs a search using the Microsoft safety scanner.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Method 2: Follow these steps:

  Step 1: Start the computer in safe mode with network and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: If the problem does not persist in SafeMode with network, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 3: Follow the steps in the article.

  How to reset the Protocol Internet (TCP/IP)

  http://support.Microsoft.com/kb/299357

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• Error message: "unable to connect to the RPC Server" and no internet connection.

  Original title: recently installed a program of pc cleaner. Seemed to really speed up my laptop that is running Windows XP.

  After two days I try to connect to the internet and no connection lie. Uninstalled the pc cleaner without problem but the problem continues to exist. All tests, etc., result in "unable to connect to the RPC server. Slide short drive and reinstall XP, are there any other things to try?

  Hi Wantamustang,

  You can try the following steps and check.

  You can set the remote procedure (RPC) call Service to start automatically:

  a. clickStart, point to settings, clickControl Paneland then double-clickServices.

  b. in theservices list, click the remote procedure (RPC) call Serviceand then clickStartup.

  c. underStartup Type, click Automaticand then click OK.

  d. restart your computer.

  You can also consult the following article:

  Windows wireless and wired network connection problems

• Setup is unable to connect to the Internet

  When I try to download and install programs on my desktop, I get an error message indicating that Setup is unable to connect to the internet. How to fix this?

  Hi NardoBailey,

  1. did you of recent changes on the computer?

  2 when was the last time it was working fine?

  3. What is the full error message that you receive?

  4. you receive the error message when you install any program on the computer?

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  See the Microsoft article below and check if it helps.

  How to troubleshoot issues that may occur when you install, uninstall, or upgrade one program on a Windows computer

  http://support.Microsoft.com/kb/2438651

• Unable to connect to the Internet / camera Manager.says I am missing drivers

  My computer crashed with virus; I wipe the hard drive around and installed Windows xp home edition. My computer is fine, but I can't get on the internet. The Device Manager has marked these places with problems (see list below) (problem is no driver installed) I'm just figuring that this is where my problem lies (unable to connect to the Internet) can you tell me please what to do to connect to the Internet and where the problem can be

  Device Manager

  Other devices

  Ethernet controller

  Network controller

  Unknown device

  Video controller

  Video controller (vga compatible)

  Go to the manufacturer's site (for whatever the brand / model of your computer is)

  Find the template, then download and install the drivers for those

• Unable to connect to the Internet or Email

  For some reason, I am unable to connect to the internet or e-mail using a wired connection. Earlier today, I was installing a wireless printer and I got it in collaboration with the wireless network. But now I switched to the cable network and I can not connect. However, the connection to the LAN network is showing that I am connected. To post this message, I had to go back to the wireless network.  I guess I have inadvertently changed a setting somewhere. I know that my firewall is not blocking the connection, because I disabled it previously but the LAN would not even connect. Any ideas?

  Thank you

  Tony

  Well, I found the problem. It's working now. The problem was that the TCP properties have been changed somehow. There was a specific IP address instead to get the IP address automatically is checked.

  Tony