Drive mapping shared with VPN access
I'm the only person in our company (small) with a Mac and I work remotely. I consulted my company using Network Connect VPN successfully.
I'm now trying to map the shared drive.
Under "OK" > "Connect to Server" I entered the address of the server ("smb: / /...") (' etc.) because it has been given to me. When I click on connect I get an error "there was a problem connecting to the server '[server address]'. The server may not exist or it is not available at this time. Check the server name or IP address, check your network connection and then try again. »
I tried a number of variations of the server address - none worked.
In the Finder, under the heading "Shared Disks", all I can see is an empty folder "servers".
When I'm on wifi office internal society, we were able to map the drive. But nothing has worked so far not remotely, remotely.
Can anyone suggest a solution?
I solved my problem. I needed to use the IP address of the server, not the full smb: / / URL etc.
Tags: Mac OS & System Software
Similar Questions
-
I have a drive mapped to the network, but (My Computer) icon is a folder. I get access denied when I click on the drive. But if I open windows Explorer, I can access the drive mapped without problems. Win Xp
original title: mapped drive error.Hello
Make sure that the mapped drive is configured to share and works on part.
Auto-mappage will not work if there is a problem with sharing.
Maybe this can help.
Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions
General example, http://www.ezlan.net/faq#trusted
Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .
Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspxSetting Windows native firewall for sharing XP -http://support.microsoft.com/kb/875357
In Win XP pro you can visually see the setting of authorization/security and configure them according to your preferences.
http://www.Microsoft.com/windowsxp/using/security/learnmore/AccessControl.mspx#securityTab
When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.
-
I can't use windows Explorer or the network drive mapping to access my NAS drive more.
original title: strange NAS problem
Hi everyone I can't seem to fix this strange problem.
I can't use windows Explorer or the network drive mapping to access my NAS drive more.
I am running windows 7 Professional 32-bit on my PC, and until about a week ago she accessed from my PC very well.The location could not be reached and have not been able to run since said today that I went to update it and the drive mapped. I'm at my wits end.
Here is some info.
I can access to other computers and devices on my network.
I can access the internet.
I have a windows XP PC in the House who can always connect to my fine NAS drive (even if it's not mine).
I PING the NAS drive.
The NAS drive will do the same if connected via cable or by wireless.UPDATE: after the implementation of a shared folder on a Windows XP computer on the same network I am also unable to acsess the part of my PC. So I can assume that I can't browse all share folders or NAS drives on my local network.
Help, please.
Thanks for the help, but I fixed my problem
Here's what I did in case anyone wants to know.
I went into Device Manager and went to network adapters.
I then expanded this section and under view changed to display hidden items.
Several hundred elements appears (for most 6to4 adapters) and I deleted all the.
Then click scan for new hardware.
And... everything works again! YAY! -
Only 200 NAS with 2 drives - maps
Hello
I have the 200 NAS with 2 separate drives and turned on for a while now. I recently formatted one of my computers (Windows XP) and built a new machine (WIN7). For some reason when I run the utility on a system drive mapping, that a single player maps. I can log into the NAS and browse through 'my files', and I don't get any errors or messages on this second disc being out of sorts.
Let me know if you need additional information and any help is greatly appreciated.
Thanks in advance.
-lw
Uncheck the "convert attempts to logon failed", did the trick.
Thanks for the help.
-lw
-
problem with write access to truecrypt readers windows 7. The mounted drive is not writing priveliges. Read-only. Cannot change in the security permissions.
Hi amcop4591,
1. How is - that Mount you the drive on the computer?
2 Di you use any third-party tool to mount the drive?
I suggest that you remove the external drive using the disk management and check back later if you can change the permissions on the drive.
If you change the permissions, make changes to the permissions on the drive and then mount the drive.
Mount or dismount a drive
http://Windows.Microsoft.com/en-us/Windows7/mount-or-dismount-a-drive
I hope this helps!
Halima S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
VPN site-to-site between two PIX 501 with Client VPN access
Site A and site B are connected with VPN Site to Site between two PIX 501.
Also, site A is configured for remote access VPN client. If a remote client connects to Site A, it can only get access to the LAN of Site A, it cannot access anything whatsoever behind PIX on Site B.
How is that possible for a VPN client connected to Site A to Site B?
Thank you very much.
Alex
Bad and worse news:
Bad: Not running the 7.0 series PIX cannot route traffic on the same interface, the traffic is recived. Version 7.0 solves this ipsec traffic.
Even worse: PIX 501 can not be upgraded to 7.0...
A couple of things to think about would be the upgrade to hardware that can run the new IOS or allowing a VPN R.A. on site B.
HTH Please assess whether this is the case.
Thank you
-
Access PIX using SSH when connected remotely with VPN client
Hello
I think that this should be a fairly simple for someone to sort for me - I'm new to PIX configuration If Yes please excuse my stupidity!
I changed the config on our PIX to allow only access via SSH (rather than via telnet as it was previously configured)
Now, everything works fine when I'm in the office - I can connect to the PIX using SSH without any problem.
However, if I work from home and connect to the office using my VPN client (IPSEC tunnel ends on the PIX firewall itself) I find that I can not connect to the PIX.
I have configured the PIX to access ssh on the office LAN subnet and the client pool of IP addresses used for VPN connections by using the following commands:
SSH 172.64.10.0 255.255.255.0 inside
SSH 192.28.161.0 255.255.255.0 inside
where the 1st line is reference to the office's LAN, which works very well, and the 2nd line denotes the IP address pool configured on the PIX for VPN access.
Can someone tell me how to fix this? I have the feeling that its something pressing!
Thank you
Neil
Try the command "management-access to the Interior.
-
Mapped network drive letter conflict with external storage / USB key
I have traced a number of network drives in Windows 7 (:) drive F: to J. Whenever I insert a USB key, it receives a drive letter of one of the network drives mapped, making the network itself inaccessible drive (actually, the reader is always displayed as a mapped network drive, it only contain data from USB).
I think that this is a known issue at least since Windows XP. I even found a fix for Windows XP, but it seems that he has not yet fixed in Windows 7.
Any ideas?
I would like to find a solution that I don't have to assign V: to Z: my readers to network to make room for USB keys.
Thank you very much!
Hello
We have had this problem also and use USBDLM to solve. It's a service that you install and it 'redirects' usb mailbox available if the one they want to use is already taken by a network drive or another usb. See the link below
It may be useful
Bruno
-
A drive mapped on the XP computer to reconnect to a Windows 7 computer
I have a XP Home Edition on a peer-to-peer network computer. I drives mapped to a new Windows 7 computer, but they are now disconnected and will not remap. I had disabled the XP computer over the weekend and now I can remap the readers, I need to access. Any suggestions?
Try to establish basic connectivity...
Start-> Run-> '\\Win7Computer '.
Or you override the network name of your machine Windows 7 for "Win7Computer."I also find that sometimes, errors in a command prompt window are more descriptive of a problem... Try to bring up a command window (start-> Run-> "cmd" "") and enter the command:
NET use * \\Win7Computer\sharename
Where you replace your network name of machine Windows 7 for "Win7Computer" and replace it with a "share name" network shared folder name You can also replace a drive letter (for example "G:" for the *)HTH,
JW -
Windows logon fails when network drive mapping
I can no longer map a network drive of my laptop Vista business to my PC (XP). I enter a username/password valid name, but I still not unsuccessful logon. I read a gazillion discussions and have made the change to the recommended without result SECPOL tool.
What makes me mad, it's this used to work! I recently had to physically move the PC (renovation of the kitchen) and perhaps its something stupid like a missed connection. Yet, I have access to the internet very well. I can ping 192.168.0.3 192.168.0. * I'm confused comment.3 is affected. My tivo est.4 and I tested this connection and that's fine.
I even had a network printer set up works very well: Photosmart \\192.168.0.3\HP...
The only area involved is WORKGROUP. I created an account "lapguest" on the PC specifically for this purpose
I forget some syntax? The GUI said essentially the same thing.
C:\Users\Wendy>net use w: \\192.168.0.3\pcc * / USER: WORKGROUP\lapguest
Type the password for \\192.168.0.3\pcc:
86 the system error occurred.The specified network password is not correct.
C:\Users\Wendy>net use w: \\192.168.0.3\pcc * /USER:\\192.168.0.3\lapguest
Type the password for \\192.168.0.3\pcc:
The context of the user provided is not valid.More help is available by typing NET HELPMSG 3775.
I think its something stupid, I forgot, but he is elusive. I also put the name of the computer in the 192.168.0.3 place, but it does not help. There is no involved DNS.
Using the graphical interface, I can browse the network to find the folder to add, but there is nothing under the computer name of the computer. "pcname" is not a valid host name. Otherwise download "logon unsuccessful". I tested the connection on the PC and it is certainly true.
In addition, I traced \\192.168.0.3\C$ successfully, but I got my LOCAL drive (portable) C. ???? that should be a big clue, but call me clueless...
I even uninstalled mcafee (completely) just in case. did ' t like it anyway so no biggie.
I know that there is a big DUH when this has been resolved.
Thanks Aaron, but I think I did it to her.
In the meantime, I decided to try sharing in the opposite direction. Which made me respond finally that est.1 which est.2 whos.3. A lot of listening to ipconfig. What etait.3.2 is the last time. (the est.2 PC and computer laptop est.3) I still want to understand how these numbers are assigned.
I found the option - rr in my earlier review, but do not know if he had an impact. Also reluctantly, I created an account with the same name on both systems to try. First of all, I shared with who. Later, I could share by using the account name that exists on the PC (lapguest).
I don't really know how the problem etait.2 et.3 mixup questions and/or syntax (file specification must be \\192.168.0.2\share-name) spec not \\PCNAME\share-name and the user must be PCNAME\username) and/or services and windows XP/VISTA problems. Maybe my new sequence got something instantiated later. Hope it sticks, whatever it is. I wrote my orders exactly. I hope that when I reboot or whether, I not have this problem again.
Ah-ah... before you sign this note, I went to test the laptop via the network printer I had previously put in place of a printed page. It did not work. I can't see why. the specifications of the printer is Photosmart \\192.168.0.3\HP... which was fine before, but now it faudrait.2. I'll have to add another printer network for the new address. I hope I remember how to do this.
Now, I can clearly see the benefits of DNS. Is there a simple way to create a name "servername" instead of having to depend on 192.168.0.n?
-
Remote VPN access - add new internal IP address
Hello
I have an existing configuration of Cisco VPN client in ASA 5510 for remote access.
-------------------------------------
Name of the Group: ISETANLOT10
Group password: xxxxIP pool: lot10ippool, 172.27.17.240 - 172.27.17.245enycrption: 3DESauthentication: SHA------------------------------------the connection was successful, and I was able to ping to the internal server 172.47.1.10.Now, there is demand for remote access VPN even can do a ping to access a new server within LAN, 172.57.1.10 & 172.57.1.20But with the same VPN access, I was unable to ping the two new IP.How can I add both IP in order to make a ping by using the same configuration of remote access VPN?I have attached below existing config (edited version)===: Saved
:
ASA Version 8.0 (4)
!
hostname asalot10
names of
name 172.17.100.22 NAVNew
name 172.27.17.215 NECUser
172.47.1.10 NarayaServer description Naraya server name
name 62.80.122.172 NarayaTelco1
name 62.80.122.178 NarayaTelco2
name 172.57.1.10 IPVSSvr IPVSSvr description
name 122.152.181.147 Japan01
name 122.152.181.0 Japan02
name 175.139.156.174 Outside_Int
name 178.248.228.121 NarayaTelco3
name 172.67.1.0 VCGroup
name 172.57.1.20 IPVSSvr2
!
object-group service NECareService
Description NECareService remote
the eq https tcp service object
EQ-ssh tcp service object
response to echo icmp service object
inside_access_in deny ip extended access list all Japan02 255.255.255.0
inside_access_in ip VCGroup 255.255.255.0 allowed extended access list all
inside_access_in list extended access deny tcp object-group PermitInternet any object-group torrent1
inside_access_in list extended access allowed object-group ip PermitInternet any newspaper disable
inside_access_in list any newspaper disable extended access allowed host ip NarayaServer
inside_access_in list extended access permit ip host IPVSSvr all
inside_access_in list any newspaper disable extended access allowed host ip NAVNew
inside_access_in list extended access permit ip host 172.17.100.30 all
outside_access_in list extended access allow object-group objects NECare a NECareService-group
outside_access_in list extended access allowed host ip DM_INLINE_NETWORK_1 NarayaServer object-group
outsidein list extended access permit tcp any host Outside_Int eq https
outsidein list extended access allowed object-group rdp any host Outside_Int debug log
outsidein list extended access allowed host tcp object-group DM_INLINE_NETWORK_2 eq Outside_Int 8080
outsidein list extended access allowed host ip DM_INLINE_NETWORK_3 IPVSSvr object-group
inside_mpc list extended access allowed object-group TCPUDP any any eq www
inside_mpc list extended access permit tcp any any eq www
inside_nat0_outbound list of allowed ip extended access all 172.27.17.240 255.255.255.248
inside_nat0_outbound list extended access permit ip host NarayaServer Nry_Png object-group
inside_nat0_outbound list extended access allowed host ip IPVSSvr2 172.27.17.240 255.255.255.248
outside_cryptomap list extended access permitted ip object-group Naraya_Png-group of objects Nry_PngGlobal interface 10 (external)
NAT (inside) 0-list of access inside_nat0_outbound
NAT (inside) 10 0.0.0.0 0.0.0.0
static (inside, outside) interface tcp 8080 8080 NarayaServer netmask 255.255.255.255
static (inside, outside) tcp 3389 3389 NAVNew netmask 255.255.255.255 interface
public static tcp (indoor, outdoor) interface ssh IPVSSvr2 ssh netmask 255.255.255.255
Access-group outsidein in external interface
inside_access_in access to the interface inside group
Route outside 0.0.0.0 0.0.0.0 175.139.156.173 1
Route inside 172.17.100.20 255.255.255.255 172.27.17.100 1
Route inside NAVNew 255.255.255.255 172.27.17.100 1
Route inside 172.17.100.30 255.255.255.255 172.27.17.100 1
Route inside NarayaServer 255.255.255.255 172.27.17.100 1
Route inside 172.47.1.11 255.255.255.255 172.27.17.100 1
Route inside VCGroup 255.255.255.0 172.27.17.100 1Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
Dynamic crypto map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs
Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
Dynamic crypto map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define security association lifetime 28800 seconds
cryptographic kilobytes 4608000 life of the set - the association of security of the 65535 SYSTEM_DEFAULT_CRYPTO_MAP of the dynamic-map
card crypto outside_map 1 match address outside_cryptomap
card crypto outside_map 1 set 218.x.x.105 counterpart
card crypto outside_map 1 set of transformation-ESP-3DES-SHA
outside_map map 1 lifetime of security association set seconds 28800 crypto
card crypto outside_map 1 set security-association life kilobytes 4608000
outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
outside_map interface card crypto outside
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
3des encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 30
preshared authentication
3des encryption
md5 hash
Group 2
life 86400internal ISETANLOT10 group policy
ISETANLOT10 group policy attributes
value of server DNS 172.27.17.100
Protocol-tunnel-VPN IPSec l2tp ipsec
username, password nectier3 dPFBFnrViJi/LGbT encrypted privilege 0
username nectier3 attributes
VPN-group-policy ISETANLOT10
username password necare encrypted BkPn6VQ0VwTy7MY7 privilege 0
necare attributes username
VPN-group-policy ISETANLOT10
naraya pcGKDau9jtKgFWSc encrypted password username
naraya attribute username
VPN-group-policy ISETANLOT10
type of nas-prompt service
type tunnel-group ISETANLOT10 remote access
attributes global-tunnel-group ISETANLOT10
address lot10ippool pool
Group Policy - by default-ISETANLOT10
IPSec-attributes tunnel-group ISETANLOT10
pre-shared-key *.
tunnel-group 218.x.x.105 type ipsec-l2l
218.x.x.105 group of tunnel ipsec-attributes
pre-shared-key *.
type tunnel-group ivmstunnel remote access
tunnel-group ivmstunnel General-attributes
address lot10ippool pool
ivmstunnel group of tunnel ipsec-attributes
pre-shared-key *.
!=====
Remote VPN access must allow the connection, but I'm guessing that your ASA does not know how to get to the two new destinations.
You have a name and a static route to the job to 172.47.1.10 Server:
name 172.47.1.10 NarayaServer description Naraya Server
route inside NarayaServer 255.255.255.255 172.27.17.100 1
.. but no equivalent for the two new hosts. As a result, all traffic of ASA destiny for them will attempt to use the default route (via the external interface).
If you add:
route inside 172.57.1.10 255.255.255.255 172.27.17.100
route inside 172.57.1.20 255.255.255.255 172.27.17.100
(assuming this is your correct entry), it should work.
-
ASA 5505: VPN access to different subnets
Hi All-
I'm trying to understand how to configure our ASA so that remote users can have VPN access to two different subnets (Office LAN and LAN phone). Currently I have 3 VLAN configuration - VLAN 1 (inside), VLAN 2 (outside), VLAN 13 (phone LAN). Essentially, remote users must be able to access their PC (192.168.1.0/24) and also have access to the office phone system (192.168.254.0/24). Is it still possible? Here are the configurations on our ASA,
Thanks in advance:
ASA Version 8.2 (5)
!
names of
name 10.0.1.0 Net-10
name 20.0.1.0 Net-20
name phone 192.168.254.0
name 192.168.254.250 PBX
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
switchport access vlan 3
!
interface Ethernet0/6
!
interface Ethernet0/7
switchport access vlan 13
!
interface Vlan1
nameif inside
security-level 100
192.168.1.98 IP address 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
address IP X.X.139.79 255.255.255.224
!
interface Vlan3
No nameif
security-level 50
192.168.5.1 IP address 255.255.255.0
!
interface Vlan13
nameif phones
security-level 100
192.168.254.200 IP address 255.255.255.0
!
passive FTP mode
object-group service RDP - tcp
EQ port 3389 object
object-group service DM_INLINE_SERVICE_1
the purpose of the ip service
EQ-ssh tcp service object
vpn_nat_inside of access list extensive ip Net-10 255.255.255.224 allow 192.168.1.0 255.255.255.0
access-list extended vpn_nat_inside allowed ip Net-10 255.255.255.224 phones 255.255.255.0
inside_nat0_outbound list extended access permits all ip Net-10 255.255.255.224
inside_access_in of access allowed any ip an extended list
Split_Tunnel_List list standard access allowed Net-10 255.255.255.224
phones_nat0_outbound list extended access permits all ip Net-10 255.255.255.224
outside_access_in list extended access allowed object-group DM_INLINE_SERVICE_1 Mac host everything
pager lines 24
Enable logging
timestamp of the record
record monitor errors
record of the mistakes of history
asdm of logging of information
Within 1500 MTU
Outside 1500 MTU
MTU 1500 phones
mask IP local pool SSLClientPool-10 10.0.1.1 - 10.0.1.20 255.255.255.128
no failover
ICMP unreachable rate-limit 1 burst-size 1
don't allow no asdm history
ARP timeout 14400
Global interface (10 Interior)
Global 1 interface (outside)
global interface (phones) 20
NAT (inside) 0-list of access inside_nat0_outbound
NAT (inside) 1 0.0.0.0 0.0.0.0
NAT (10 vpn_nat_inside list of outdoor outdoor access)
NAT (phones) 0-list of access phones_nat0_outbound
NAT (phones) 1 0.0.0.0 0.0.0.0
inside_access_in access to the interface inside group
Access-group outside_access_in in interface outside
Route outside 0.0.0.0 0.0.0.0 X.X.139.65 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
AAA authentication enable LOCAL console
the ssh LOCAL console AAA authentication
LOCAL AAA authorization command
Enable http server
http 192.168.1.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
outside_map interface card crypto outside
Crypto ca trustpoint ASDM_TrustPoint0
registration auto
name of the object CN = not - asa .null
pasvpnkey key pair
Configure CRL
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
3des encryption
sha hash
Group 2
lifetime 28800
VPN-sessiondb max-session-limit 10
Telnet timeout 5
SSH 192.168.1.100 255.255.255.255 inside
SSH 192.168.1.0 255.255.255.0 inside
SSH Mac 255.255.255.255 outside
SSH timeout 60
Console timeout 0
dhcpd auto_config inside
!
dhcpd address 192.168.1.222 - 192.168.1.223 inside
dhcpd dns 64.238.96.12 66.180.96.12 interface inside
!
a basic threat threat detection
host of statistical threat detection
Statistics-list of access threat detection
a statistical threat detection tcp-interception rate-interval 30 burst-400-rate average rate 200
SSL-trust outside ASDM_TrustPoint0 point
WebVPN
allow outside
AnyConnect essentials
SVC disk0:/anyconnect-win-2.5.2014-k9.pkg 1 image
SVC disk0:/anyconnect-macosx-i386-2.5.2014-k9.pkg 2 image
enable SVC
tunnel-group-list activate
internal SSLClientPolicy group strategy
attributes of Group Policy SSLClientPolicy
WINS server no
value of 64.238.96.12 DNS server 66.180.96.12
VPN-access-hour no
VPN - connections 3
VPN-idle-timeout no
VPN-session-timeout no
IPv6-vpn-filter no
VPN-tunnel-Protocol svc
group-lock value NO-SSL-VPN
by default no
VLAN no
NAC settings no
WebVPN
SVC mtu 1200
SVC keepalive 60
client of dpd-interval SVC no
dpd-interval SVC bridge no
SVC compression no
attributes of Group Policy DfltGrpPolicy
value of 64.238.96.12 DNS server 66.180.96.12
Protocol-tunnel-VPN IPSec svc webvpn
attributes global-tunnel-group DefaultRAGroup
address-pool SSLClientPool-10
IPSec-attributes tunnel-group DefaultRAGroup
pre-shared key *.
NO-SSL-VPN Tunnel-group type remote access
General-attributes of the NO-SSL-VPN Tunnel-group
address-pool SSLClientPool-10
Group Policy - by default-SSLClientPolicy
NO-SSL-VPN Tunnel - webvpn-attributes group
enable PAS_VPN group-alias
allow group-url https://X.X.139.79/PAS_VPN
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
!
global service-policy global_policy
privilege level 3 mode exec cmd command perfmon
privilege level 3 mode exec cmd ping command
mode privileged exec command cmd level 3
logging of the privilege level 3 mode exec cmd commands
privilege level 3 exec command failover mode cmd
privilege level 3 mode exec command packet cmd - draw
privilege show import at the level 5 exec mode command
privilege level 5 see fashion exec running-config command
order of privilege show level 3 exec mode reload
privilege level 3 exec mode control fashion show
privilege see the level 3 exec firewall command mode
privilege see the level 3 exec mode command ASP.
processor mode privileged exec command to see the level 3
privilege command shell see the level 3 exec mode
privilege show level 3 exec command clock mode
privilege exec mode level 3 dns-hosts command show
privilege see the level 3 exec command access-list mode
logging of orders privilege see the level 3 exec mode
privilege, level 3 see the exec command mode vlan
privilege show level 3 exec command ip mode
privilege, level 3 see fashion exec command ipv6
privilege, level 3 see the exec command failover mode
privilege, level 3 see fashion exec command asdm
exec mode privilege see the level 3 command arp
command routing privilege see the level 3 exec mode
privilege, level 3 see fashion exec command ospf
privilege, level 3 see the exec command in aaa-server mode
AAA mode privileged exec command to see the level 3
privilege, level 3 see fashion exec command eigrp
privilege see the level 3 exec mode command crypto
privilege, level 3 see fashion exec command vpn-sessiondb
privilege level 3 exec mode command ssh show
privilege, level 3 see fashion exec command dhcpd
privilege, level 3 see the vpnclient command exec mode
privilege, level 3 see fashion exec command vpn
privilege level see the 3 blocks from exec mode command
privilege, level 3 see fashion exec command wccp
privilege see the level 3 exec command mode dynamic filters
privilege, level 3 see the exec command in webvpn mode
privilege control module see the level 3 exec mode
privilege, level 3 see fashion exec command uauth
privilege see the level 3 exec command compression mode
level 3 for the show privilege mode configure the command interface
level 3 for the show privilege mode set clock command
level 3 for the show privilege mode configure the access-list command
level 3 for the show privilege mode set up the registration of the order
level 3 for the show privilege mode configure ip command
level 3 for the show privilege mode configure command failover
level 5 mode see the privilege set up command asdm
level 3 for the show privilege mode configure arp command
level 3 for the show privilege mode configure the command routing
level 3 for the show privilege mode configure aaa-order server
level mode 3 privilege see the command configure aaa
level 3 for the show privilege mode configure command crypto
level 3 for the show privilege mode configure ssh command
level 3 for the show privilege mode configure command dhcpd
level 5 mode see the privilege set privilege to command
privilege level clear 3 mode exec command dns host
logging of the privilege clear level 3 exec mode commands
clear level 3 arp command mode privileged exec
AAA-server of privilege clear level 3 exec mode command
privilege clear level 3 exec mode command crypto
privilege clear level 3 exec command mode dynamic filters
level 3 for the privilege cmd mode configure command failover
clear level 3 privilege mode set the logging of command
privilege mode clear level 3 Configure arp command
clear level 3 privilege mode configure command crypto
clear level 3 privilege mode configure aaa-order server
context of prompt hostname
no remote anonymous reporting call
Hello
Loss of connectivity to the LAN is not really supposed all remove this command UNLESS your network is using another device as their gateway to the Internet. In this case configuration dynamic PAT or political dynamics PAT (as you) would make sense because the LAN hosts would see your VPN connection from the same directly connected network users and would be know to traffic before the ASA rather than their default gateway.
So is this just for VPN usage and NOT the gateway on the LAN?
If it is just the VPN device I'd adding this
global interface (phones) 10
He would do the same translation for 'phones' as he does on 'inside' (of course with different PAT IP)
-Jouni
-
Satellite A300-1OM - Media sharing with XBox 360
I'll have some real problems share my media with my Xbox 360 using my home wireless network.
I used to connect my 360 to the internet via internet sharing with my laptop connected via Ethernet. I now borrow a wireless adapter for the 360 that still lets connect me to the internet on the 360, but I can no longer access my portable music library or find a PC Windows Media Centre when searching for the network on my 360.
My laptop is running Windows 7 64 bit. When I display 'network' appears from my own laptop, my second laptop computer connected to the network is also shown, and the 360 is also indicated in the devices section of media. Under 'Options of Streaming Media' my 360 is also listed and given full access to my portable media.
When my laptop is connected directly to my 360 via Ethernet the music library and video library works great, like Windows Media Center.
Anyone know of any solution to this problem? I guess it will just be a problem with some settings on my laptop as opposed to a problem with my Xbox. Any advice much appreciated!
Hey bradleyheap,
To be honest it is very difficult to answer your question. In my opinion, you should ask question biotechnology in Xbox forum o somewhere else. I think that it is not related to Toshiba
Anyway, if everything works with the LAN cable, you should check the firewall options. Try turning off the Windows Firewall and update the driver WLAN from your laptop.
Sorry, but everything that s what I can say at the moment.
-
I have a drive mapped to a Server 2008 all the hours his loses drive mapping and the backups in case of failure
I get the error message is could not reconnect account currently disabled mapped drive .so I remap the disk with the same user name and password and it reconnects
* original title - Networking file sharing file sharing file sharing file sharing Fileshare discovery network shares mapped shared part readers *.
Hi SCS PCs
I would recommend checking the Microsoft TechNet community. Please visit the link below to find community which will support ask you in the right direction for the linked domain questions.
http://social.technet.Microsoft.com/forums/en-us/winservergen/threads
I hope this helps.
-
Wireless Internet with 'limited access '.
I tried to connect my new laptop Dell Vista to our network wireless at home. After many unsuccessful attempts (due to an unknown "logon doamin") I was finally able to connect to our server, however, with "limited access". Despite having "limited access" internet still does not work. Is anyway to solve this? We currently have two other laptops that work well on the wireless network.
Hello
Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I would like to
Update your WiFi drivers on computers. How you are positioned in the router? Are there
obstacles in the path? Make sure that the computer is trying to connect to the correct router as there may be
another strong signal near her.Other Vista computers? You use the WPA/WPA2 security?
Actually try updating your driver and disabling the network logon. Use a wired connection or download
pilots on another machine and transfer on removable media.Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlDownload - SAVE - go where you put it - right click – RUN AS ADMIN.
You can download several at once however restart after the installation of each of them.
After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
manufacturer of system become your backup policies).Repeat for card (NIC) network and is a good time to get the other updated drivers as Vista like
updated drivers.I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
are almost always old, and you can search drivers manually as needed.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx------------------------------------------------------
Make sure you know the details of connection to your wireless router - SSID and password.
You lose connection when you do and have to redo your logon.
Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
lower left click on merge or delete network locations - REMOVE all instances of your network (and the
others you don't use anymore) - REBOOT. Start - Connect To log on to the network.-----------------------------------------------------
Check this box:
Strange problem with Internet under Vista
http://www.catonett.com/blog/archives/194Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
http://support.Microsoft.com/kb/928233/en-us----------------------------------------------------
And:
Network connection problems
http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspxI hope this helps.
Rob - bicycle - Mark Twain said it is good.
Maybe you are looking for
-
Amazon videos my my mac and silverlight
I was watching Amazon videos on my mac with no problems, then last night, something happened and I download something Adobe which I didn't and thought I had deleted. Today my home screen returns with yahoo that I don't want, but especially, I can't w
-
I can run apliccation x 86/64 native on this?
Can I install an ambient devolopment as Visual Studio 12 on a tablet of 8 TP? Can I use my x 86/64 native top apliccation?
-
What type of PCI slots are there on my Acer Aspire AXC-705
I want to install a card firewire on my PC but don't know what type to get. Some forward-looking PCI cards I've been look seem to be too long to fit in the slot (which is on 9cms long). Can you help me?
-
Why can I not see post facebook and twits people App?
As far I understand win8, I suppose to see my friends facebook post and jerks in the people application. Why can I not see any post or two rascals? The app is only ' connected to ' my gmail & hotmail. I tried to connect my facebook and twitter our fo
-
How I would get to the wires inside the tube?
Should what precautions I take in order to give the impression that the 'sons' out the tube?Thank you