Unable to connect to the virtual machine to the external host

Similar Questions

• Unable to connect to MKS: virtual machine configuration file does not exist

  Guys,

  Need a little help I'm running the following

  vCenter Server 4.0.0 (build 208111)

  ESX Server 4.0.0 (build 208167)

  I have a computer virtual running WIndows 2000 Advanced and when I try and open the console I get a black screen and the error message following

  "" Unable to connect to MKS: virtual machine configuration file does not exist '. "

  I scoured the data store and all the files of the virtual machine appear to be in place, I thought deletin the virtual machine from the inventory and add the vmdk file, it would be a good idea?

  Thank you.

  Remove and add new inventory won't hurt (you could lose data historial for virtual machine), it probably won't solve the problem.

  I doubt, it is a problem with the .vmx file, but you can try:

  -Remove the VM of the inventory

  -To create the new virtual machine (with the same characteristics as the virtual machine that you removed), name it differently and do not add hard drives that it

  -Change the new VM settings and add the existing VMDK virtual machine that you deleted

  -Power on VM and try

  • You should always have your complete file to the virtual machine original intact, in case you need, you will always have your original vmx file to add it to the inventory.

  By doing these steps you re-create the vmx file.

  f this post was useful/solved your problem, please mark the points of wire and price as seem you. Thank you!

• Unable to connect to a virtual machine

  Hey, I am unable to run one of my virtual machines with VMware Player or workstation.

  The error I get is "fatal error VMware Player: (vmx).

  0xc0000006 (disk when paging error) exception occurred.

  A log file is available in "7\vmware.log C:\Users\Peter\Documents\Virtual Machines\True Windows Virtual Machine.

  You can request support.

  To collect the data to be submitted to the technical support of VMware, run 'vm-support.

  We will respond on the basis of your right to support. «and what comes immediately after is "power error: cannot find a valid peers to connect to.»

  If you want to know how it (possibly) happened, I put my Virtual Machine in a suspended state, but he took a while to make my computer shifted so I just shut down my computer and it's been like that since. All other virtual machines that I played.

  This could is related to a corrupted file .vmss in the folder of the virtual machine. The .vmss file stores the information of the previous day and due to the closure may not have been written correctly. Try to remove/rename the file .vmss to see if this allows you to turn on the virtual computer.

  If this does not work, please report (attached) latest vmware.log in your next post the VM.

  André

• Unable to connect to the external display

  Original title - Alienware m17X

  My function keys stopped working, I am tring to connect my Alienware 2210 monitor I hooked up and working before, my computer tells me that it is not connected. The HDMI is plugged into my screen and my computer. When I'm on my desktop and I right click for inside, click Customize my display settings that I click on that opens and then click on connect an external display and it says no connection. All this was that I have to type FN/F6 to change the display of laptop to external display. I know it's a setting I prevent my FN keys work, but I don't know how to fix it?

  Hi RandyHester

  1. what happens if you use the function keys?
  2. What is the exact error message that you receive when you try to connect?
  3. try you the office mirror or extend the desktop on the external monitor?

  Please refer to the below links and check if the information provided allows -http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-multiple-monitor-problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/multiple-monitors-frequently-asked-questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-multiple-monitors
  http://Windows.Microsoft.com/en-us/Windows-Vista/understanding-multiple-monitors

  I hope this helps.

• Unable to connect to the external network

  I don't have to VLAN configuration in my network 254 IP addresses, I can't create a VLAN now as almost all of the IP addresses are assigned.

  I'm trying to make the point of Contact with 30 remaining IPs. I created an external network without ID(I do not have VLAN) VLAN, I couldn't connect to the outside world. Can I create an external network without creating a VLAN in the switch?

  Thank you

  Prasad

  Then just create a net external portgroup with no tag VLAN and create VCDNI network pool and leave the field VLAN empty when it is created

• Unable to connect to a virtual machine of browser in Mac

  I try to use NAT/vmnet8 to hit a running application server in my vmware image of CentOS of Firefox on my Mac. I have the 2 adapter network configured in NAT mode.

  Here is my newtorking file in the Mac (Fusion 4.1.3)

  VERSION = 1, 0
  VNET_1_DHCP Yes
  meet VNET_1_DHCP_CFG_HASH 8C6DCB4198364F893E8DFC03F0F82D49299ACC99
  address VNET_1_HOSTONLY_NETMASK 255.255.255.0
  meet VNET_1_HOSTONLY_SUBNET 192.168.195.0
  VNET_1_VIRTUAL_ADAPTER Yes
  VNET_8_DHCP Yes
  meet VNET_8_DHCP_CFG_HASH 0D930DED910941272E2CD5D06F232E726292BFA2
  address VNET_8_HOSTONLY_NETMASK 255.255.255.0
  meet VNET_8_HOSTONLY_SUBNET 192.168.10.0
  VNET_8_NAT Yes
  VNET_8_VIRTUAL_ADAPTER Yes
  meet VNET_8_VIRTUAL_ADAPTER_ADDR 192.168.10.1

  And here if my network in the CentOS (ifcfg-eth1) configuration:

  DEVICE = eth1

  IPV6INIT = no

  ONBOOT = yes

  BOOTPROTO = static

  IPADDR = 192.168.10.10

  SUBNET MASK = 255.255.255.0

  set the GATEWAY = 192.168.10.2

  Not only I can not knock the browser with the URL https://192.168.10.10 but:

  1. when inside of the CentOS image, I do: ping and ping 192.168.10.2 192.168.10.1 I get inaccessible Destination host?

  2. when the Terminal in the Mac I ping 192.168.10.2 get permission denied (I guess that's normal), but I can ping wmvet8 (192.168.10.1)

  It seems that I still need to learn a few networks here and would appreciate any help.

  Thank you

  jbravo23 wrote: Cisco AnySecure Connect Mobility Client

  This is a known issue and has been mentioned in the VMware Fusion Release Notes some time.

• Unable to connect to the server hosting site

  When I connect my hosting site my log in username and password are recognized,

  but the site continues to send me to the log in page. Is my firewall or port settings
  prohibit access?
  JC

  Hello

  The Microsoft Answers community focuses on the context of use. Please reach out to the business community of COMPUTING in the TechNet forum below.

  See the link.

  http://social.technet.Microsoft.com/forums/en-us/category/windowsxpitpro

• Can't export virtual machines: unable to connect to the remote server

  Hello

  I'm working on vSphere client 5.1 (vCenter Server 5.1). Trying to export a virtual machine for distribution model. When I go to file-> export the template OVF..., I get the following error message:

  Can't export virtual machines: unable to connect to the remote server

  Remote not sure what/who he is not able to connect to. If I connect vSphere Web Client and navigate to the same model (or all other models), under 'All the Actions of vCenter' I don't have an option to export to the model of the FVO. But if I use a VM machine instead of a virtual machine template, I have the ability to export to the OVF, but it is grayed out.

  Am I missing any customer authorization or plugin for vShpere?

  Discovered that vSphere server had some modifications made by HIM to resolve the violation POODLE. HE had to set the ip address of the machine where export OVF will be performed. Which allowed the connection to establish vsphere client and perform an export of the FVO.

• EA6500 unable to connect to the router after Time Machine

  Just got an EA6500 - updated to the latest firmware available.

  I have attached 2 x WD NAS and 1 x WD through the USB port of the device.

  Each time after I finished running Time Machine on the MacBookPro (written to one of the WD NAS), I can no more connection to the router as neither the local IP, or the cisco connect cloud. The error message I get (loosely formulated) is: unable to connect to the router. Please ensure that the router is connected to the internet.

  At this point, all the devices connected to the router (wired and wireless) still can access Internet perfectly. Only the console of the router is therefore more accessible.

  Anyone else have the issue?

  Any ideas on how to solve it?

  Contact support for Cisco and the person advised me to do a factory reset (even if the router is new with no customization!). Regardless, it now works correctly. Cisco Cloud Connect works always before, during, and after a Time Machine.

  "When in doubt, try to turn the grid and the.

• Unable to connect to the virtual disk Service, Virtual Disk Manager Interface not registered

  I installed Windows 7 Ultimate on this laptop as a new installation about six months ago.  Since then, I don't think I ever ran diskmgmt.  Today, I joined a new external hard drive usb, it reported the drivers installed fine, but then the installation bombed at the beginning.  I went to verity, what had happened and has run diskmgmt.msc (as an administrator), but she came back with the message "Unable to connect to the virtual disk Service" and also a small OK msgbox appeared with the title "Virtual Disk Manager" and the "Interface not registered" message

  I disconnected the USB hard drive and tried again diskmgmt, but no change.

  I restarted in safe mode, tried diskmgmt, but no change.

  I ran sfc/scannow, but it has reported that it found no errors.

  I checked that the virtual disk service has been configured as a textbook in services.msc, and event viewer showed that when I ran diskmgmt he started VDS and then stopped VDS.

  I tried again, but still not like before.

  Is there some dll I can't regsrv32?

  Thank you

  Marc

  Hello

  I suggest you to return the items for the following responses from Microsoft, he says same issues with trying the troubleshooting steps and check if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/cant-start-disk-management-unable-to-connect-to/31898500-9d84-4CB5-9ba3-c1f42e3b1ace

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/problems-with-Vista-after-unplugging-by-external/093f1660-160F-478f-b81a-493e963ffd9a

  http://TechNet.Microsoft.com/en-us/library/cc771775.aspx

  Note: it also applies to Windows 7.

  Hope the information is useful.

• I am unable to connect to the virtual pc Xp mode when I try to open a session given an error unable to connect to the domain that a domain controller is down or unavailable,

  I am unable to connect to the virtual pc Xp mode when I try to open a session given an error unable to connect to the domain that a domain controller is down or unavailable,

  Hi Rajendra Patil,

  I suggest you to ask your question on the TechNet Forums.

  Windows Virtual PC and XP Mode.

  http://social.technet.Microsoft.com/forums/en/w7itprovirt/threads

  I hope this helps!

• [nQSError: 12008] unable to connect to the port 9706 on machine

  OBIEE 11.1.1.6.7 worked very well. I just re-uploaded repository after making a few changes as user/password and of connection name string. After that, I started again all services and now I am getting following error:

  OBIEE@OBIEEUAT bin] $. / opmnctl startall
  opmnctl startall: from opmn and managed all process...
  ================================================================================
  opmn id = OBIEEUAT:9501
  Answer: 0 on 1 process started.

  IAS = instance1 instance ID
  ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
  --------------------------------------------------------------------------------
  IAS-component/process-type/process-set:
  coreapplication_obis1/OracleBIServerComponent/coreapplication_obis1 /.

  Error
  -> Process (index = 1, uid = 471344379, pid = 12829)
  Cannot start a process managed after the attempt limit maximum
  Journal:
  /OBIEE/Oracle/middleware/instances/Instance1/Diagnostics/logs/OracleBIServerComponent/coreapplication_obis1/console~coreapplication_obis1~1.log

  [2014 02-10 T 21: 39:46.000 + 02:00] [OBIPS] [ERROR: 31] [] [saw.connectionPool.getConnection] [ecid:] [tid:] connection to the Oracle BI server error: could not connect to the Oracle BI server because it is not running or is inaccessible. Please contact your system administrator.

  ODBC driver returned an error (SQLDriverConnectW).

  State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error occurred.

  [nQSError: 12002] Communication to the socket call = Connect error: (number = 107) Transport endpoint is not connected

  [nQSError: 12010] Communication connection to the remote end point error: address = OBIEEUAT; port = 9706.

  [nQSError: 12008] Unable to connect to the port 9706 on machine OBIEEUAT. (HY000) [[

  Leader: Connection.cpp

  Online: 413

  Geographical area:

  1. saw.connectionPool.getConnection
  2. Saw.Security.odbcuserpopulationimpl.getbisystemconnection
  3. Saw.Security.odbcuserpopulationimpl.searchidentities
  4. Saw.Security.userpopulationmanagerimpl.getaccountdetailsbyid
  5. Saw.Security.handleguids
  6. Saw.Catalog.aclsearchhandler.handleacliniteminfo
  7. Saw.Catalog.scrubacls.Scrub
  8. Saw.Security.securityimpl.Initialize
  9. saw.catalog.local.loadCatalog
  10. Saw.Subsystems.catalogbootstrapper.loadcatalog
  11. Saw.webextensionbase.init
  12. Saw.sawserver

  ECID:

  ]]

  Any idea to solve this problem?

  Note: Earlier it was working fine. I got this error after downloading update of RPD

  Concerning

  Park

  There was problem RPD username/password so I downloaded the RPD with correct password again. Now it works like a charm

• Unable to connect to the computer virtual in Virtual Center

  I have 4 ESX host in my VC, all of them under a single cluster, after we have change our front door, I give account that I can't connect to all virtual machines Console, so if I highlight the virtual machine and click Console I got this massage, "impossible to connect to the host X.X.X.X". : a connection attempt failed because the connected party responded properly after a while or connection faild, etc... »

  So I change all the bridges of you to every host ESX, we have to point to the new access point, and now I can connect to the virtual machines for 3 guests, the 4th host always has the same problem although I change the door of entry, but still cannot connect to all virtual machines on it. If I Vmotion all VM in this host to another host, I can connect to the vm console, I have also to restart these services

  service mgmt-vmware restart

  service vmware-vpxa restart

  restarting the service vmware-vmkauthd

  Any idea?

  903 port must be open from VC to the ESX host. Or add the following to/etc/vmware/config

  vmauthd.server.alwaysProxy = TRUE

• Unable to connect to the MKS: (name of user and password) Login incorrect

  I am trying to use the VMware workstation 12, connect to the server feature but I get this error message.

  My desktop pc (host) is running windows 7 and running VMware workstation 12. I shared one of my virtual machines. I have activate port, 443, 902 and 903 on my router. I temporarily disabled my firewall.

  When I try to connect to my laptop running Kubuntu and Vmware workstation 12 host, I am able to connect to the host, I am able to see my shared VM and I am able to turn on and off but that's about all. I can not actually use the virtual machine, because I get the message in the title.

  Can someone help me? Thank you.

  Found a solution.

  In the host (windows)

  Open Notepad as administrator

  Edit the file in:

  C:\ProgramData\VMware\VMware Workstation\config.ini

  Change:

  Authd.client.port = "903".

  TO:

  Authd.client.port = '902 '.

  Save

  Unable to connect to the MKS: Login (user and password name) incorrect - Spiceworks

• Unable to connect to the error of MKS

  When I am plugged into the network, I can open the consoles of virtual machines without any problem. However, when I am out of the office and connect to the network via the VPN, it leaves me in vSphere, but when I try to log on to a computer virtual console, I get the error "unable to connect to the MKS. Unable to connect to the server {server name}: 902. Why I open a console when it is connected to the network, but not when I am connected via VPN? Thank you.

  See this KB Article

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=749640

• vCenter Server displays the error message: unable to connect to the host

  vCenter Server displays the error message: unable to connect to the host

  Symptoms

  • vCenter Server cannot connect to a host when you perform operations such as:

  •

  o Storage vMotion

  o cold migration

  o cloning a virtual machine

  o the model deployment

  • Newspapers vpxd that contains an entry similar to:

  [2009-06-04 19:27:16.326 error "App" 4444] [VpxdInvtHost] IP address change for 10.223.122.143 to 10.223.127.197 unhandled, verification of the SSL certificate is not enabled.

  • You see errors similar to:

  Unable to connect to the host o

  o [2009-06-04 19:27:09.952 'Libs' 3902384 WARNING] [NFC ERROR] NfcNewAuthdConnectionEx: unable to connect to peer (numRetries = 2). Error: Unable to connect to the host 10.223.122.143: connection timed out

  • vCenter Server shows the VMS as being disconnected then connected.

  Hello

  Resolution

  Cause

  This problem can occur if an ESX host's IP address is changed while being managed by vCenter Server.

  Check the cause

  To check the cause of the problem:

  1. Log in as root to the ESX host using a SSH client.
  1. In the file etc/opt/vmware/vpxa/vpxa.cfg, find the IP address of the host. The entry looks like:

     
     10.21.48.121
     

     Note: for more information about editing the files, see installation in VMware ESX configuration files (1017022).

  Troubleshooting

  If the IP address is incorrect, perform the following steps in order. If the operation does not resolve the problem, continue to the next step. Don't skip a step.

  1. Disconnect and then reconnect the host:
  1. Right click on the ESX host in vCenter Server and click Disconnect.
  1. Reconnect the ESX host in vCenter Server.
  1. Restart the VirtualCenter agent on the ESX host:
  1. Stop the service of vpxa with the command:

     # service vmware-vpxa stop

  1. Open the /etc/opt/vmware/vpxa/vpxa.cfg file in a text editor and correct the IP address of the ESX host.
  1. Start the service of vpxa with the command:

     # service vmware-vpxa start

     Note: for VMware ESXi, you may have to restart all the management agents. For more information, see restart the agents on an ESX or ESXi Server (1003490) management .

  1. Rebuild the VirtualCenter agent on the ESX host configuration file:

     Attention: this step removes all the Statistics counters historical host and the virtual machine. If VMware ESX host is running in virtual machines that starts in a permitted CVS environment, you maybe won't be able to add the host without stopping the virtual machines first.

  1. Right click on the ESX host in vCenter Server and click Disconnect.
  1. Remove the ESX host disconnected from vCenter Server.
  1. Backup the file vpxa.cfg with the command:

     # mv /etc/opt/vmware/vpxa/vpxa.cfg /etc/opt/vmware/vpxa/vpxa.oldcfg

  1. Add the ESX host disconnected to the server vCenter inventory.
  1. Run the following command to view the contents of /etc/opt/vmware/vpxa/vpxa.cfg and confirm that the host IP address is correct:

     # cat /etc/opt/vmware/vpxa/vpxa.cfg