Unable to deploy VCSA 6.0 with PSC external HA

Similar Questions

• PSC external - VCSA Gets the invalid credentials

  I recently deployed a PSC external, using the device of VCSA 6.0 U1 recently made public.  Beginning of the PSC external deployment took place without a hitch.  No problem whatsoever.  However, when it comes to then deploy the VCSA with a PSC external, I get the invalid credentials.

  The PSC and VCSA are on the same subnet, and I deploy from my office.  There is no firewall between them and no control of the East-West traffic that could be disturbing the communication.  I can telnet to the PSC to my office on 443.  No internal certs are used, just the standard self-signed certs of VMware.

  I do NOT use the PSC HA config where an F5 (or any other load balancing program) comes into play.  Just a PSC and a device of vCenter (with the same configuration in another data center and related enhanced modes enabled... If I ever get to this point).

  Any ideas?  I think I've exhausted all the Vmkware KB and google this thing to death.

  

  I also see these things in the newspaper of the csd, that correspond with invalid credentials messages in the vcsa newspapers:

  2015-09-15 15:17:51] request [INFO] 1151 - [sso: QyUT-UDyA-Okks-RXbt] .validate: receipt.

  [2015-09-15 15:18:12] [ERRO] Ask 1151 - [sso: QyUT-UDyA-Okks-RXbt] .validate: ERROR_GET_DOMAIN_NAME error status: failure to the UNIQUE application of '005F2F80' authentication domain: 58

  [2015-09-15 15:18:19] [INFO] Ask 1153 - [session: session] .ping: receipt.

  [2015-09-15 15:18:49] [INFO] Ask 1154 - [session: session] .ping: receipt.

  [2015-09-15 15:19:19] [INFO] Ask 1155 - [session: session] .ping: receipt.

  [2015-09-15 15:19:47] [INFO] Ask 1157 - [sso: QyUT-UDyA-Okks-RXbt] .validate: receipt.

  [2015-09-15 15:20:08] [ERRO] Ask 1157 - [sso: QyUT-UDyA-Okks-RXbt] .validate: ERROR_GET_DOMAIN_NAME error status: failure to the UNIQUE application of '005F2D18' authentication domain: 58

  [2015-09-15 15:20:08] [INFO] Ask 1158 - [session: session] .ping: receipt.

  [2015-09-15 15:20:19] [INFO] Ask 1160 - [session: session] .ping: receipt.

  [2015-09-15 15:20:49] [INFO] Ask 1161 - [session: session] .ping: receipt.

  [2015-09-15 15:21:19] [INFO] Ask 1162 - [session: session] .ping: receipt.

  [2015-09-15 15:21:49] [INFO] Ask 1163 - [session: session] .ping: receipt.

  [2015-09-15 15:22:11] [INFO] Ask 1165 - [sso: QyUT-UDyA-Okks-RXbt] .validate: receipt.

  [2015-09-15 15:22:32] [ERRO] Ask 1165 - [sso: QyUT-UDyA-Okks-RXbt] .validate: ERROR_GET_DOMAIN_NAME error status: failure to the UNIQUE application of '005F2D70' authentication domain: 58

  [2015-09-15 15:22:32] [INFO] Ask 1166 - [session: session] .ping: receipt.

  [2015-09-15 15:22:49] [INFO] Ask 1168 - [session: session] .ping: receipt.

  [2015-09-15 15:23:19] [INFO] Ask 1170 - [session: session] .ping: receipt.

  [2015-09-15 15:23:44] [INFO] Ask 1173 - [sso: QyUT-UDyA-Okks-RXbt] .validate: receipt.

  While this may be caused by an incompatibility of certificate, in my case, it was a problem with the office network.  While port 443 is open to the ESXi host and the PSC external UDP 123 was not, and did not observe in any newspaper, it seems to have been the problem.  NTP on the PSC itself worked fine.

  As a test, I tried to deploy VCSA w/year embedded PSC.  This deployment also failed NTP citing it as a problem.  Changing the setting to synchronize with the host allowed FRO deployment to continue.  If you have a similar problem with invalid credentials, this can be a good test for you as well to make sure that UDP 123 is accessible from your desktop.  I don't know why it should be, but I can only assume that the place from which you are running the installation acts as a proxy for communication of all kinds.

  So in addition to making sure DNS lookup front and rear work correctly, verify the port 443 to the PSC external target host and if these things are good, try to deploy a device VCSA with the PSC incorporated using NTP for time synchronization.  If this fails, you may need to change your deployment location (unless it's easy for you to get this open port).

  Simply, I built a Windows VM base on the same subnet as my other management/infra peripheral, pushed the .iso from a store of data and mounted on this VM and connected to install it there.  Went off without a hitch.

• Deploy VCSA device with questions answered? How?

  Hey guys,.

  Pretty novice here with pcli.

  When I deploy a device, the example vshield or the vcsa using the c# client I have to enter the ip address, domain name full etc. etc. Then after and end for the device that will be deployed.

  Now how do these parameters in a script pcli?

  The cmdlet import-TIME is not that. How I will know ahead that would require a device as parameters when I use pcli?

  Please help me, google me has no a lot yet.

  Thank you

  RJ

  In fact, it is a new feature in PowerCLI 5.8 R1, which we published on Monday, you can now use the Get-OVFConfiguration cmdlet to create a response object and then pass it to the cmdlet Import-VAPP and example of this is below which I created for Insight journal, soon you can see more about it on the PowerCLI blog and my personal blog.

  # Load OVF/OVA configuration into a variable
   $ovffile = "C:\Software\VMware-vCenter-Log-Insight-2.0.3-1879692_1.ova"
   $ovfconfig = Get-OvfConfiguration $ovffile
  
   # List properties of the OVF/OVA configuration
   $ovfconfig
  
   # Get the values to use for deployment
   $VMHost = Get-Cluster "Cluster Site A" | Get-VMHost | Sort MemoryGB | Select -first 1
   $Datastore = $VMHost | Get-datastore | Sort FreeSpaceGB -Descending | Select -first 1
   $Network = Get-VirtualPortGroup -Name "VM Network" -VMHost $vmhost
  
   # Fill out the OVF/OVA configuration parameters
   $ovfconfig.DeploymentOption.Value = "xsmall"
   $ovfconfig.NetworkMapping.Network_1.Value = $Network
   $ovfconfig.IpAssignment.IpProtocol.value = "IPv4"
   $ovfconfig.vami.VMware_vCenter_Log_Insight.hostname.Value = "LI01"
   $ovfconfig.vm.rootpw.Value = "VMware1!"
  
   # Deploy the OVF/OVA with the config parameters
   Import-VApp -Source $ovffile -OvfConfiguration $ovfconfig -Name "LI01" -VMHost $vmhost -Datastore $datastore -DiskStorageFormat thin
  

• Unable to deploy model NSX 6.1.0

  Hello

  I'm trying to deploy VMware-NSX-Manager - 6.1.0 - 2107742.ova model via customer web and vSphere vCenter.

  But im unable to deploy while 80%, it shows the error message:

  "Impossible to deploy.

  "" Could not deploy OVF package: the request has been aborted: the request was canceled. ' " »

  I downloaded the file my NSX training portal OVF template.

  Kindly help me on this!

  Hello

  Your EGGS could be damaged during the download. Try to test it with 7 - Zip or another program zip (a .ova is actually a zip file), verify the signature of the downloaded file's md5 or just download it again.

• My ZTE open C unable to connect to the wlan with 63-signs-hex key.

  Hello

  my C open from ZTE unable to connect to the wlan with WPA2-PSK and a 63 sign hex key. When I create a 2. ESSID with WPA2-PSK a sentence normal, everything's fine.

  Oliver

  Hi OliverwithZTE,

  I understand that you have connection problems to your network WPA2-PSK.

  Unfortunately, WPA2-PSK is currently not supported on Firefox OS version 1.3. Only WPA-TKIP and WPA2-AES are supported.

  -Ralph

• Unable to zoom in or out with the trackpad on macbookpro 17 "

  Firefox 4.0 unable to zoom in or out with the trackpad on macbookpro 17 "

  Some actions have been removed in Firefox 4.

  You can restore the zoom feature by changing the related values of downtown on the topic: config page.

  browser.gesture.pinch.in cmd_fullZoomReduce
  browser.gesture.pinch.in.shift cmd_fullZoomReset
  browser.gesture.pinch.out cmd_fullZoomEnlarge
  browser.gesture.pinch.out.shift cmd_fullZoomReset
  

  • http://KB.mozillazine.org/about%3Aconfig

• Cann't deploy xnet in RT with Veristand 2011

  Hello

  I can hardly deploy XNET in RT my laptop has installed labivew 2010 and 2011 Veristand. When I tried to deploy a simple application with XNET device in PXI-8106. An unknown error has occurred:

  possible reason (s):

  =========================
  NEITHER VeriStand: Open VI reference in Custom Devices Storage.lvlib-> pen device reference (Interface HW) .vi-> Custom Devices Storage.lvlib:Initialize Device (Interface HW) .vi OR VeriStand Engine.lvlib:Initialize Inline Custom Devices.vi-> NI VeriStand Engine.lvlib:VeriStand Machine.vi engine-> Engine.vi NI VeriStand Engine.lvlib:VeriStand-> NI VeriStand Engine.lvlib:VeriStand .vi engine Wrapper (RT)
  C:\NI-rt\NIVeriStand\XNET\NI-XNET.llb\NI-XNET.VI

  * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
  ? Unloading system definition file...
  ? Connection with target controller has been lost.

  The PXI-8106 monitor showed an errow as follows:

  System error.

  Detail:
  Error code: 1026
  Error message: LabVIEW: VI reference is not valid

  
  
  var sogoutip = document.getElementById ("sogoutip");
  Tip for var = {};
  Tip.Word = sogoutip.innerHTML;
  Tip.config = sogoutip.title.split(",");
  var hint = storeHint();
  sogouExplorer.extension.sendRequest ({cmd: 'show', data: {Tip: Tip, Tip: tip}});
  } else {}
  If (document.getElementById ("windowcloseitnow")) {}
  sogouExplorer.extension.sendRequest ({cmd: "closeit", data: true});
  }
  }
  }, 0);

  }

  (}) (window.external.sogouExplorer(window,7));
  //

  
  

• Error "Unable to establish two-way communication with the device" Windows 8 with c309g

  Operating system: windows 8, 64 - bit

  computer: desktop

  Home network: network, the computer is on a wired connection, printer is on a wireless connection

  error message: "the computer is unable to establish two-way communication with the device.

  • When you install first of all my husband's new computer, we were able to install the software and connect the printer very well, and the printed test page.
  • A few days later, I installed the HP ePrint app on my iPad, found our printer and tried to print a page of a Web site. Printing failed, and the iPad app gave a message something like "the Word document may be printed." I cancelled again tried the iPad app, print work, and has not yet. I had not heard of AirPrint, so I did that on my iPad.
  • We tried to print the page of the computer instead, but the task has failed.
  • We looked at the parameters of the printer through the computer of windows 8 and found that there are two differently named c309g printer now displayed in the printer list.
  • My husband uninstalled the printer software, the computer restarted and reinstalled and then got the "the computer is unable to establish two-way communication with the device.

  any ideas on what to do next?

  My brilliant husband fixed it. Power cycling the router.

• Problem of the printer, I get "the computer is unable to establish two-way communication with the device.

  Original title: printer problem

  "The computer is unable to establish two-way communication with the device. I have pluged a all cables and pluged in that they return.

  Hello
   
  1. What is the brand of your printer?
  2. when the question is is produced?
  3. you remember to make changes to your computer before the problem?
  4. when exactly you get this error?
   
  I would temporarily disable all security software and check if the problem persists.
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off
  
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
   
  Note: Antivirus software can help protect your computer against viruses and other security threats.  In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  If you have an HP printer, you can consult the links below.
   
  http://h10025.www1.HP.com/ewfrf/wc/document?LC=en&DLC=&cc=us&DocName=c01868684&product=3737195
   
  http://h10025.www1.HP.com/ewfrf/wc/document?LC=en&DLC=&cc=us&DocName=c00301806&product=407677
  
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Photosmart C4795 all-in-1 main: all-in-one HP Photosmart C4700 printer unable to establish 2 way communication with the PC

  I have more than one year of experience using this printer with no problems. Several days ago, it has become unplugged from the PC that I have been using it for over a year & stayed like that for 2 or 3 days. At the end of those 2 or 3 days, the cable has been properly reconnected, but was unable to restore '2 - way communication' with my PC since then.

  As this is a scanner/printer I have proven it always of the functions as a photo Copier.

  To try to solve this problem, I updated the drivers & replaced the cable with a new one without success.

  My OS is Windows 7, as this PC 4 or 5 year, is not compatible with windows 10.

  PS - I would also try to use it with my new PC (a Touchsmart laptop HP with Windows 10 15), but my terms of service for the State of Photosmart C4795 printer software which using the software on more than 1 computer is a violation of the terms of service.

  Running the diagnostics to http://www.hp.com/go/tools can help solve the problem of communication with your PC.  Download and run "print and Scan Doctor."

  For your Windows 10 machine I suggest you download the recommended driver and software from HP here.

• Unable to deploy device applications examples

  I'm unable to deploy any of the samples from samples waterfall waterfall on my device. I get the following error when I try

  There is no program file
  /Users/jeswinsimon/projects/bucktlist/sampleApps/starshipsettings/arm/o.Le-v7-g/starshipsettings not found
  /Users/jeswinsimon/projects/bucktlist/sampleApps/starshipsettings/arm/o.Le-v7-g/starshipsettings not found
  /Users/jeswinsimon/projects/bucktlist/sampleApps/starshipsettings/arm/o.Le-v7-g/starshipsettings not found

  Feature: Dev Alpha B OS Version: 10.1.0.1720

  QNX Momentics® IDE for BlackBerry® 10 native SDK

  Version: 10.2.0

  Build id: v201306031341

  You probably imported the project.  I just checked myself and starshipsettings working on my bbndk Dev Alpha C. last 10.2.

  File-> import-> General-> existing projects into workspace and you need to select the directory or the zip file.

  After that I just checked the build configuration - debugging the device, he built and ran it on the device.

  If you still have questions download the example directly from github: https://github.com/blackberry/Cascades-Samples - maybe you have the old version.

• Unable to connect to internet home with Blackberry 8900 for windows 7

  Unable to connect to internet home with Blackberry 8900 to windows 7, error = a network cable is not plugged in correctly or may be broken, tried a different cable, same problem?

  Hello

  1. are you able to use the Blackberry 8900 on any other computer?

  2 have had any changes made to the computer before the show?

  Please follow the steps in the link.

  Support for attached modem use

  http://btsc.webapps.blackberry.com/btsc/viewdocument.do;jsessionid=55C4DA5CE489E53E47CDDDB9FA0C6A59?externalId=KB05178&sliceId=2&cmd=displayKC&docType=kc&noCount=true&ViewedDocsListHelper=com.kanisa.apps.common.BaseViewedDocsListHelperImpl

  If you are still experiencing a problem, I suggest you to contact Blackberry support team for assistance.

  http://supportforums.BlackBerry.com/T5/community-corner/BD-p/corner

• Unable to deploy the HFM application 11.1.2.4

  Hello

  I tried to deploy an application of EPMA helped HFM. I created the application in EPMA and validated. When I try to deploy, the process ends with these newspapers

  14/06/2015 11:11:15:, an error occurred when registering the application.

  14/06/2015 11:11:16: opening the application.

  14/06/2015 11:11:17: cannot open the application. Connected the user is not placed in service for this application: HFM:COMMA4

  14/06/2015 11:11:17: deploy completed with errors.

  I also checked HyS9FinancialManagementJavaServer-syserr errorlog to C:\Oracle\Middleware\user_projects\epmsystem1\diagnostics\logs\services and I see this

  June 14, 2015 11:10:50 oracle.epm.fm.hssservice.CASecurityManager generateRegistrationXML

  SEVERE: An error occurred when registering the application.

  java.io.FileNotFoundException: C:\Oracle\Middleware\user_projects\epmsystem1\products\FinancialManagement\ServerWorkingFolder\ReportStyleSheets\Application\Registration\InstanceRegistration.xslt (the system cannot find the path specified)

  at java.io.FileInputStream.open (Native Method)

  at java.io.FileInputStream. < init > (FileInputStream.java:120)

  at java.io.FileInputStream. < init > (FileInputStream.java:79)

  at oracle.epm.fm.hssservice.CASecurityManager.generateRegistrationXML(CASecurityManager.java:406)

  at oracle.epm.fm.hssservice.CASecurityManager.registerApplication(CASecurityManager.java:310)

  at oracle.epm.fm.hsxserver.service.HsxServerImpl.registerApplication(HsxServerImpl.java:462)

  at oracle.epm.fm.hsxserver.service.HsxServerImpl.createApplication(HsxServerImpl.java:378)

  at oracle.epm.fm.hsxserver.service.HsxServerServiceHandler.createApplication(HsxServerServiceHandler.java:238)

  to oracle.epm.fm.common.service.hsxserver.HsxServerService$ Processor$ createApplication.getResult(HsxServerService.java:4041)

  to oracle.epm.fm.common.service.hsxserver.HsxServerService$ Processor$ createApplication.getResult(HsxServerService.java:4025)

  at org.apache.thrift.ProcessFunction.process(ProcessFunction.java:39)

  at org.apache.thrift.TBaseProcessor.process(TBaseProcessor.java:39)

  to org.apache.thrift.server.TThreadPoolServer$ WorkerProcess.run (TThreadPoolServer.java:206)

  to java.util.concurrent.ThreadPoolExecutor$ Worker.runTask (ThreadPoolExecutor.java:886)

  to java.util.concurrent.ThreadPoolExecutor$ Worker.run (ThreadPoolExecutor.java:908)

  at java.lang.Thread.run(Thread.java:662)

  June 14, 2015 11:10:50 oracle.epm.fm.hssservice.CASecurityManager registerApplication

  SEVERE: An error occurred when registering the application.

  java.lang.NullPointerException

  at oracle.epm.fm.hssservice.CASecurityManager.generateRegistrationXML(CASecurityManager.java:468)

  at oracle.epm.fm.hssservice.CASecurityManager.registerApplication(CASecurityManager.java:310)

  at oracle.epm.fm.hsxserver.service.HsxServerImpl.registerApplication(HsxServerImpl.java:462)

  at oracle.epm.fm.hsxserver.service.HsxServerImpl.createApplication(HsxServerImpl.java:378)

  at oracle.epm.fm.hsxserver.service.HsxServerServiceHandler.createApplication(HsxServerServiceHandler.java:238)

  to oracle.epm.fm.common.service.hsxserver.HsxServerService$ Processor$ createApplication.getResult(HsxServerService.java:4041)

  to oracle.epm.fm.common.service.hsxserver.HsxServerService$ Processor$ createApplication.getResult(HsxServerService.java:4025)

  at org.apache.thrift.ProcessFunction.process(ProcessFunction.java:39)

  at org.apache.thrift.TBaseProcessor.process(TBaseProcessor.java:39)

  to org.apache.thrift.server.TThreadPoolServer$ WorkerProcess.run (TThreadPoolServer.java:206)

  to java.util.concurrent.ThreadPoolExecutor$ Worker.runTask (ThreadPoolExecutor.java:886)

  to java.util.concurrent.ThreadPoolExecutor$ Worker.run (ThreadPoolExecutor.java:908)

  at java.lang.Thread.run(Thread.java:662)

  June 14, 2015 11:11:16 oracle.dms.context.internal.WrapUtils unpack

  WARNING: Place the process failed to wrap string 0000KrmpTK2Fw000jzwkno1LVQ4A00000U.

  java.lang.IllegalArgumentException: no valid version information found in the string of film.

  to oracle.dms.context.internal.WrapUtils$ WrapStringDecoderImpl. < init > (WrapUtils.java:1598)

  at oracle.dms.context.internal.WrapUtils.unwrap(WrapUtils.java:1211)

  at oracle.dms.context.DMSContextManager.unwrap(DMSContextManager.java:1161)

  at oracle.dms.context.ExecutionContext.unwrap(ExecutionContext.java:266)

  at oracle.epm.fm.filetransfer.service.FileTransferServiceHandler.setObjectInThreadLocal(FileTransferServiceHandler.java:37)

  at oracle.epm.fm.hsxserver.service.HsxServerServiceHandler.getConnectedServer(HsxServerServiceHandler.java:163)

  to oracle.epm.fm.common.service.hsxserver.HsxServerService$ Processor$ getConnectedServer.getResult(HsxServerService.java:3827)

  to oracle.epm.fm.common.service.hsxserver.HsxServerService$ Processor$ getConnectedServer.getResult(HsxServerService.java:3811)

  at org.apache.thrift.ProcessFunction.process(ProcessFunction.java:39)

  at org.apache.thrift.TBaseProcessor.process(TBaseProcessor.java:39)

  to org.apache.thrift.server.TThreadPoolServer$ WorkerProcess.run (TThreadPoolServer.java:206)

  to java.util.concurrent.ThreadPoolExecutor$ Worker.runTask (ThreadPoolExecutor.java:886)

  to java.util.concurrent.ThreadPoolExecutor$ Worker.run (ThreadPoolExecutor.java:908)

  at java.lang.Thread.run(Thread.java:662)

  June 14, 2015 11:11:16 oracle.dms.context.internal.WrapUtils unpack

  WARNING: Place the process failed to wrap string 0000KrmpTK2Fw000jzwkno1LVQ4A00000U.

  java.lang.IllegalArgumentException: no valid version information found in the string of film.

  to oracle.dms.context.internal.WrapUtils$ WrapStringDecoderImpl. < init > (WrapUtils.java:1598)

  at oracle.dms.context.internal.WrapUtils.unwrap(WrapUtils.java:1211)

  at oracle.dms.context.DMSContextManager.unwrap(DMSContextManager.java:1161)

  at oracle.dms.context.ExecutionContext.unwrap(ExecutionContext.java:266)

  at oracle.epm.fm.filetransfer.service.FileTransferServiceHandler.setObjectInThreadLocal(FileTransferServiceHandler.java:37)

  at oracle.epm.fm.hsxserver.service.HsxServerServiceHandler.createSession(HsxServerServiceHandler.java:198)

  to oracle.epm.fm.common.service.hsxserver.HsxServerService$ Processor$ createSession.getResult(HsxServerService.java:3851)

  to oracle.epm.fm.common.service.hsxserver.HsxServerService$ Processor$ createSession.getResult(HsxServerService.java:3835)

  at org.apache.thrift.ProcessFunction.process(ProcessFunction.java:39)

  at org.apache.thrift.TBaseProcessor.process(TBaseProcessor.java:39)

  to org.apache.thrift.server.TThreadPoolServer$ WorkerProcess.run (TThreadPoolServer.java:206)

  to java.util.concurrent.ThreadPoolExecutor$ Worker.runTask (ThreadPoolExecutor.java:886)

  to java.util.concurrent.ThreadPoolExecutor$ Worker.run (ThreadPoolExecutor.java:908)

  at java.lang.Thread.run(Thread.java:662)

  June 14, 2015 11:11:17 oracle.epm.fm.hssservice.SecurityWrapper authenticateUserAndGetInfoInternal

  SEVERE: Open a user session is not provisioned for this application: HFM:COMMA4

  June 14, 2015 11:11:23 oracle.dms.context.internal.WrapUtils unpack

  I am not able to understand why the new application is not able to enroll in shared services. Any ideas? Thank you

  Here's the step.

  Copy the folder "Report Style Sheets" of

  \\Oracle\Middleware\EPMSystem11R1\products\FinancialManagement\Server working folder

  TO

  \\Oracle\Middleware\user_projects\epmsystem1\products\FinancialManagement\Server working folder

  After you have copied the folder, if it please redeploy the application and check if it works.

• VCSA 5.1 with Oracle Express Edition?

  Hello

  is it possible to use VCSA 5.1 with Oracle XE? Do you have experience with this?

  Thank you

  Pavel

  Sorry, I'm not an expert on Oracle licenses

  This Oracle licensing FAQ can help you out: http://www.orafaq.com/wiki/Oracle_licensing

  I think you could take the Oracle Standard One maybe? Although it is limited to only 2 CPU sockets, so if you ever want more CPU, you will need to purchase another license.

• Unable to connect 660 s Inspiron with Win 7 Ultimate to the internet

  Unable to connect 660 s Inspiron with Win 7 Ultimate to the internet. Window, says "you are not connected to a network.  Clicked on the difficulty of the problem of connection and new window says "install a driver for your network adapter."   The computer is connected to a Xfinity modem via an ethernet cable and no wifi.  Still nothing. How to connect?

  Happy it all resolved now.

  Please mark this thread as answered.