Unable to dial international

Cannot call international calls. CME 10 running on 2921 router have PRI circuit

find call capture below. At & t says that it is not there.

using # for inter-chiffre timeout

Call number 5864467604

Number of the caller 80118128813990 #.

call capture:

008206: Mar 1 17:09:45.761: / / 62839, B9B65DF08291, CCAPI, ccGenerateToneInfo:

Stop your finger = FALSE, tone = Null,

Tone management = sum network, Params = 0 x 0, Call Id = 62839

008207: Mar 1 17:09:45.761: / / 62886, B9B65DF08291, CCAPI, cc_api_call_feature:

Star Type = 50, = 0x40977FA8, Id = 62886 Call Interface

008208: 1 Mar 17:09:45.785: / / 62886, B9B65DF08291, CCAPI, cc_api_call_facility:

Interface = 0x40977FA8, Id = 62886 Call

008209: Mar 1 17:09:45.785: / / 62886, xxxxxxxxxxxx, CCAPI, cc_api_ha_call_active_notify:

008210: Mar 1 17:09:45.785: mainst_callID:0xF5A6, peer_callID:0xF577, confID:0 x 874 call_info, spi_type:4, media_flo_thru:1, num_streams:1, swmtpmsp_present:0

008211: Mar 1 17:09:45.785: / / 62886, xxxxxxxxxxxx, CCAPI, cc_api_ha_call_active_notify:

008212: 17:09:45.785 Mar 1: stream [0]: callid:0xF5A6, media_passthrough:0

008213: Mar 1 17:09:45.785: / / 62839, B9B65DF08291, CCAPI, ccConferenceDestroy:

Conference Id = 0 x 874, Tag = 0 x 0

008214: Mar 1 17:09:45.785: / / 62839, B9B65DF08291, CCAPI, ccConferenceDestroy:

008215: 17:09:45.785 Mar 1: confID:0 x 874; callEntry1 callID1:0xF577, type: 6; callEntry2 callID2:0xF5A6, type: 3

008216: Mar 1 17:09:45.785: / / 62839, B9B65DF08291, CCAPI, cc_api_bridge_drop_done:

Conference Id = 0 x 874, Source Interface = 0x3E9926D4, Source Call Id = 62839.

Call destination ID = 62886, available = 0x0, Tag = 0 x 0

008217: Mar 1 17:09:45.785: / / 62886, xxxxxxxxxxxx, CCAPI, cc_api_get_xcode_stream:

008218: Mar 1 17:09:45.785: cc_api_get_xcode_stream: 4982

008219: Mar 1 17:09:45.785: / / 62839, xxxxxxxxxxxx, CCAPI, cc_api_get_xcode_stream:

008220: Mar 1 17:09:45.785: cc_api_get_xcode_stream: 4982

008221: Mar 1 17:09:45.785: / / 62886, xxxxxxxxxxxx, CCAPI, cc_api_get_xcode_stream:

008222: Mar 1 17:09:45.785: cc_api_get_xcode_stream: 4982

008223: Mar 1 17:09:45.785: / / 62886, xxxxxxxxxxxx, CCAPI, cc_api_get_xcode_stream:

008224: Mar 1 17:09:45.785: cc_api_get_xcode_stream: 4982

008225: Mar 1 17:09:45.785: / / 62886, B9B65DF08291, CCAPI, cc_api_bridge_drop_done:

Conference Id = 0 x 874, Source = 0x40977FA8, Source Call Id = 62886 Interface.

Call destination ID = 62839, available = 0x0, Tag = 0 x 0

008226: Mar 1 17:09:45.785: / / 62839, B9B65DF08291, CCAPI, cc_generic_bridge_done:

Conference Id = 0 x 874, Source = 0x40977FA8, Source Call Id = 62886 Interface.

Call destination ID = 62839, available = 0x0, Tag = 0 x 0

008227: Mar 1 17:09:45.785: / / 62886, B9B65DF08291, CCAPI, ccCallFacility:

Call Id = 62886

008228: Mar 1 17:09:45.785: / / 62839, B9B65DF08291, CCAPI, ccConferenceCreate:

(Raytheon = 0xFFFFFFFF, callID1 = 0xF577, gcid = B9B65DF0-DF3011E5-8291F44E-5E62F10, tag = 0 x 0)

008229: Mar 1 17:09:45.785: / / 62886, B9B65DF08291, CCAPI, ccConferenceCreate:

(Raytheon = 0xFFFFFFFF, callID2 = 0xF5A6, gcid = B9B65DF0-DF3011E5-8291F44E-5E62F10, tag = 0 x 0)

008230: Mar 1 17:09:45.785: / / 62839, B9B65DF08291, CCAPI, ccConferenceCreate:

Conference Id = 0xFFFFFFFF, call = 62839 Id1, Id2 appeal is 62886, Tag = 0 x 0

008231: Mar 1 17:09:45.785: / / 62839, B9B65DF08291, CCAPI, cc_api_bridge_done:

Conference Id = 0 x 876, Source Interface = 0x3E9926D4, Source Call Id = 62839.

Call destination ID = 62886, available = 0x0, Tag = 0xFFFFFFFF

008232: Mar 1 17:09:45.785: / / 62886, xxxxxxxxxxxx, CCAPI, cc_api_get_xcode_stream:

008233: Mar 1 17:09:45.785: cc_api_get_xcode_stream: 4982

008234: Mar 1 17:09:45.785: / / 62886, xxxxxxxxxxxx, CCAPI, cc_api_get_xcode_stream:

008235: Mar 1 17:09:45.785: cc_api_get_xcode_stream: 4982

008236: Mar 1 17:09:45.785: / / 62886, B9B65DF08291, CCAPI, cc_api_bridge_done:

Conference Id = 0 x 876, Source = 0x40977FA8, Source Call Id = 62886 Interface.

Call destination ID = 62839, available = 0x0, Tag = 0 x 0

008237: Mar 1 17:09:45.785: / / 62839, B9B65DF08291, CCAPI, cc_generic_bridge_done:

Conference Id = 0 x 876, Source = 0x40977FA8, Source Call Id = 62886 Interface.

Call destination ID = 62839, available = 0x0, Tag = 0 x 0

008238: Mar 1 17:09:45.785: / / 62839, B9B65DF08291, CCAPI, ccConferenceCreate:

Call the entry (Conference Id = 0 x 876, Destination Call Id = 62886)

008239: Mar 1 17:09:45.785: / / 62886, B9B65DF08291, CCAPI, ccConferenceCreate:

Call the entry (Conference Id = 0 x 876, Destination Call Id = 62839)

008240: Mar 1 17:09:45.785: / / 62839, B9B65DF08291, CCAPI, ccConferenceCreate:

008241: 17:09:45.785 Mar 1: confID:0 x 876; callEntry1 callID1:0xF577, type: 6; callEntry2 callID2:0xF5A6, type: 3

008242: Mar 1 17:09:45.785: / / 62839, B9B65DF08291, CCAPI, cc_api_caps_ind:

Destination interface is 0x40977FA8, Destination Call Id = 62886, Source Call Id = 62839.

Caps (Codec = 0 x 1, Fax rate = 0 x 1, Fax Version: = 0, Vad = 0 x 1,)

Modem = 0 x 2, Codec bytes = 20, Type of Signal = 3)

008243: Mar 1 17:09:45.785: / / 62839, B9B65DF08291, CCAPI, cc_api_caps_ind:

Caps (Playout Mode = 1, Initial = 60 (ms) playout, Playout Min = 40 (ms),)

Playout Max = 1000 (ms), Fax name = 300 (ms))

008244: Mar 1 17:09:45.785: / / 62886, B9B65DF08291, CCAPI, cc_api_caps_ind:

Destination interface is 0x3E9926D4, Destination Call Id = 62839, Source Call Id = 62886.

Caps (Codec = 0 x 1, Fax rate = 0 x 2, Fax Version: = 0, Vad = 0 x 2,)

Modem = 0 x 0, Codec bytes = 160, Type of Signal = 2)

008245: Mar 1 17:09:45.785: / / 62886, B9B65DF08291, CCAPI, cc_api_caps_ind:

Caps (Playout Mode = 1, Initial = 60 (ms) playout, Playout Min = 40 (ms),)

Playout Max = 1000 (ms), Fax name = 300 (ms))

008246: Mar 1 17:09:45.785: / / 62886, B9B65DF08291, CCAPI, cc_api_caps_ack:

Destination interface is 0x3E9926D4, Destination Call Id = 62839, Source Call Id = 62886.

Version of caps (codec = g711ulaw (0x1), Fax Rate = (0 x 2) FAX_RATE_VOICE, Fax: = 0, ON(0x2) = Vad,)

Modem = OFF (0x0), Codec bytes = 160, Type of Signal = 2, Seq Num Start = 43331)

008247: Mar 1 17:09:45.785: / / 62839, B9B65DF08291, CCAPI, cc_api_caps_ack:

Destination interface is 0x40977FA8, Destination Call Id = 62886, Source Call Id = 62839.

Version of caps (codec = g711ulaw (0x1), Fax Rate = (0 x 2) FAX_RATE_VOICE, Fax: = 0, ON(0x2) = Vad,)

Modem = OFF (0x0), Codec bytes = 160, Type of Signal = 2, Seq Num Start = 43331)

008248: Mar 1 17:09:45.789: / / 62886, B9B65DF08291, CCAPI, ccCallNotify:

Mask of data bits = 0 x 7, Call Id = 62886

008249: Mar 1 17:09:45.789: / / 62839, B9B65DF08291, CCAPI, cc_process_notify_bridge_done:

Conference Id = 0 x 876, call Id1 is 62839, call Id2 = 62886

008250: Mar 1 17:09:45.789: / / 62839, B9B65DF08291, CCAPI, cc_api_voice_mode_event:

Call Id = 62839

008251: Mar 1 17:09:45.789: / / 62839, B9B65DF08291, CCAPI, cc_api_voice_mode_event:

Call Entry (Context = 0x3F2BFE78)

008252: Mar 1 17:10:02.912: //-1/2E5FCA3F803E/CCAPI/cc_api_display_ie_subfields:

cc_api_call_setup_ind_common:

Cisco-username = 1604

-ccCallInfo IE subfields-

Cisco-ani = 1604

Cisco-anitype = 0

Cisco-aniplan = 0

Cisco-anipi = 0

Cisco-anisi = 1

dest = 80118128813990 #.

Cisco-desttype = 0

Cisco-destplan = 0

Cisco-ISDS = FFFFFFFF

Cisco-rdn =

Cisco-rdntype = 0

Cisco-rdnplan = 0

Cisco-rdnpi =-1

Cisco-rdnsi =-1

Cisco-redirectreason = - 1 fwd_final_type = 0

final_redirectNumber =

hunt_group_timeout = 0

008253: Mar 1 17:10:02.912: //-1/2E5FCA3F803E/CCAPI/cc_api_call_setup_ind_common:

Interface = 0x40977FA8, call Info)

Number = 1604,(Calling Name=) (TON = unknown, NPI = unknown, screening = User, spent, presentation = allowed).

Called number = # 80118128813990 (TON = unknown, NPI = unknown)

The appeal translated = FALSE, Subscriber Type Str = unknown, FinalDestinationFlag = FALSE,

Incoming dial-peer = 40016, progress Indication = NULL (0), Calling THE Present = TRUE,

Road Trkgrp Label source, label Trkgrp road target = CLID Transparent = FALSE), call Id = 62895

008254: Mar 1 17:10:02.912: //-1/2E5FCA3F803E/CCAPI/ccCheckClipClir:

In: Component number = 1604 (TON = unknown, NPI = unknown, screening = User, spent, presentation = allowed)

008255: Mar 1 17:10:02.912: //-1/2E5FCA3F803E/CCAPI/ccCheckClipClir:

Out: Component number = 1604 (TON = unknown, NPI = unknown, screening = User, spent, presentation = allowed)

008256: Mar 1 17:10:02.912: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:

008257: 17:10:02.912 Mar 1: cc_get_feature_vsa success of malloc

008258: Mar 1 17:10:02.912: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:

008259: 17:10:02.912 Mar 1: number of cc_get_feature_vsa is 6

008260: Mar 1 17:10:02.912: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:

008261: 17:10:02.912 Mar 1: the FEATURE_VSA attributes are: feature_name:0, feature_time:567235496, feature_id:10085

008262: Mar 1 17:10:02.912: / / 62895, 2E5FCA3F803E, CCAPI, cc_api_call_setup_ind_common:

Set up the event sent;

Call Info (number = 1604 (TON = unknown, NPI = unknown, screening = User, spent, presentation = allowed),)

Called number = # 80118128813990 (TON = unknown, NPI = unknown))

008263: Mar 1 17:10:02.916: / / 62895, 2E5FCA3F803E, CCAPI, cc_process_call_setup_ind:

Event = 0x3E5C7A48

008264: Mar 1 17:10:02.916: //-1/xxxxxxxxxxxx/CCAPI/cc_setupind_match_search:

Try again with the demoted called number # 80118128813990

008265: Mar 1 17:10:02.916: / / 62895, 2E5FCA3F803E, CCAPI, ccCallSetContext:

Context = 0x3F2BD328

008266: Mar 1 17:10:02.916: / / 62895, 2E5FCA3F803E, CCAPI, cc_process_call_setup_ind:

> Handed CCAPI cid 62895 with tag 40016 app '_ManagedAppProcess_Default '.

008267: Mar 1 17:10:02.916: / / 62895, 2E5FCA3F803E, CCAPI, ccCallSetupAck:

Call Id = 62895

008268: Mar 1 17:10:02.916: / / 62895, 2E5FCA3F803E, CCAPI, cc_api_set_transfer_info:

Number of transfer =, reason of transfer = 0x0

008269: Mar 1 17:10:02.916: / / 62895, 2E5FCA3F803E, CCAPI, ccCallReportDigits:

(callID = 0xF5AF, digit_event = 0 x 0, enable = FALSE, consume = FALSE)

008270: Mar 1 17:10:02.916: / / 62895, 2E5FCA3F803E, CCAPI, ccCallReportDigits:

Enabled = TRUE, Call Id = 62895

008271: Mar 1 17:10:02.916: / / 62895, 2E5FCA3F803E, CCAPI, cc_api_call_report_digits_done:

(vdbPtr = 0x40977FA8, callID = 0xF5AF, disp = 0, digit_event = 0 x 0, enable = FALSE, consume = FALSE)

008272: Mar 1 17:10:02.916: / / 62895, 2E5FCA3F803E, CCAPI, cc_api_call_report_digits_done:

Enabled = TRUE, available = 0 x 0, Interface = 0x40977FA8, Call Id = 62895

008273: Mar 1 17:10:02.916: / / 62895, 2E5FCA3F803E, CCAPI, cc_api_call_report_digits_done:

Call the entry (first number Timeout = 10000 (ms), including Timeout = 10000 (ms)) numbers

008274: Mar 1 17:10:02.916: / / 62895, 2E5FCA3F803E, CCAPI, ccCallProceeding:

Progress Indication = NULL (0)

008275: Mar 1 17:10:02.920: / / 62895, 2E5FCA3F803E, CCAPI, ccCallSetupRequest:

Destination =, Calling IE date = TRUE, Mode = 0.

Leaving Dial-peer = 220, Params = 0x3F2AA448, Indication = NULL (0) progress

008276: Mar 1 17:10:02.920: / / 62895, 2E5FCA3F803E, CCAPI, ccCheckClipClir:

In: Component number = 5864467604 (TON = unknown, NPI = unknown, screening = User, spent, presentation = allowed)

008277: Mar 1 17:10:02.920: / / 62895, 2E5FCA3F803E, CCAPI, ccCheckClipClir:

Departures: Component number = 5864467604 (TONE = unknown, NPI = unknown = User, spent, screening presentation allowed =)

008278: Mar 1 17:10:02.920: / / 62895, 2E5FCA3F803E, CCAPI, ccCallSetupRequest:

The destination model = 8011 t., called number = 80118128813990, band numbers = TRUE

008279: Mar 1 17:10:02.920: / / 62895, 2E5FCA3F803E, CCAPI, ccCallSetupRequest:

Number = 5864467604 (TON = unknown, NPI = unknown, screening = User, spent, presentation = allowed).

Called number = 80118128813990 (TON = unknown, NPI = unknown).

Redirect = number, display Info is MacDormott, Tracy

Account number = 1604, Final Destination flag = FALSE,

GUID = 2E5FCA3F-DF31-11E5-803E-E9BB423D3151, outbound Dial-peer = 220

008280: Mar 1 17:10:02.920: / / 62895, 2E5FCA3F803E, CCAPI, cc_api_display_ie_subfields:

ccCallSetupRequest:

Cisco-username = 1604

-ccCallInfo IE subfields-

Cisco-ani = 5864467604

Cisco-anitype = 0

Cisco-aniplan = 0

Cisco-anipi = 0

Cisco-anisi = 1

dest = 80118128813990

Cisco-desttype = 0

Cisco-destplan = 0

Cisco-ISDS = FFFFFFFF

Cisco-rdn =

Cisco-rdntype = 0

Cisco-rdnplan = 0

Cisco-rdnpi =-1

Cisco-rdnsi =-1

Cisco-redirectreason = - 1 fwd_final_type = 0

final_redirectNumber =

hunt_group_timeout = 0

008281: Mar 1 17:10:02.920: / / 62895, 2E5FCA3F803E, CCAPI, ccIFCallSetupRequestPrivate:

Interface = 0x3E9926D4, Type of Interface = 6, Destination =, the Mode = 0x0,

Call Params (number = 5864467604, (component name = MacDormott, Tracy) (TON = unknown, NPI = unknown, screening = User, spent, presentation = allowed),)

Called number = 80118128813990 (TON = unknown, NPI = unknown), the appeal translated = FALSE,

Subscriber Type Str = unknown, FinalDestinationFlag = FALSE, outgoing Dial-peer = 220, Call Count On = FALSE,

Trkgrp road Label source, label of road target Trkgrp =, tg_label_flag = 0, Application Call Id =)

008282: Mar 1 17:10:02.920: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:

008283: 17:10:02.920 Mar 1: cc_get_feature_vsa success of malloc

008284: Mar 1 17:10:02.920: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:

008285: 17:10:02.920 Mar 1: number of cc_get_feature_vsa is 7

008286: Mar 1 17:10:02.920: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:

008287: 17:10:02.920 Mar 1: the FEATURE_VSA attributes are: feature_name:0, feature_time:567239752, feature_id:10086

008288: Mar 1 17:10:02.920: / / 62896, 2E5FCA3F803E, CCAPI, ccIFCallSetupRequestPrivate:

Application for facility call SPI's success; Interface type = 6, FlowMode = 1

008289: Mar 1 17:10:02.920: / / 62896, 2E5FCA3F803E, CCAPI, ccCallSetContext:

Context = 0x3F2AA3F8

008290: Mar 1 17:10:02.920: / / 62895, 2E5FCA3F803E, CCAPI, ccSaveDialpeerTag:

Outbound Dial-peer = 220

008291: 17:10:02.924 Mar 1: ISDN Se0/0/0:23 Q931: application typeplan for sw-type 0xD is 0 x 2 0 x 1, Calling num 5864467604

008292: 17:10:02.924 Mar 1: ISDN Se0/0/0:23 Q931: sending INSTALLATION callref = 0x035A callID = 0x82DB = primary interface - or = User switch

008293: 17:10:02.924 Mar 1: ISDN Se0/0/0:23 Q931: TX-> INSTALLATION pd = callref 8 = 0x035A

Carrying capacity I = 0x8090A2

Standard = CCITT

Ability to transfer = speech

Circuit transfer mode

Transfer rate = 64 kbit/s

The channel ID I have = 0xA98397

Exclusive, Channel 23

Installation I have = 0x9F8B0100A11902013C02010080114D6163446F726D6F74742C205472616379

Protocol profile = Extensions of networks

0xA11902013C02010080114D6163446F726D6F74742C205472616379

Element = Invoke component

Invoke Id = 60

Operation = CallingName

Name the permitted view extended

Name = MacDormott, Tracy

Calling party number i = 0 x 2181, '5864467604'

Plan: ISDN, Type: National

Called the part number I = 0 x 80, 8 '0118128813990' has been stripped.

Plan: Unknown Type: unknown

008294: 17:10:03.024 Mar 1: ISDN Se0/0/0:23 Q931: RX<- call_proc="" pd="8" callref="">

The channel ID I have = 0xA98397

Exclusive, Channel 23

008295: Mar 1 17:10:03.024: / / 62896, 2E5FCA3F803E, CCAPI, cc_api_call_proceeding:

Interface = 0x3E9926D4, Indication = NULL (0) progress

008296: 17:10:04.124 Mar 1: ISDN Se0/0/0:23 Q931: RX<- progress="" pd="8" callref="">

Because I = 0x82FF - error of interoperability; unspecified

Tuition I = 0 x 8281 - call ISDN not end-to-end, can have information in the Strip

008297: Mar 1 17:10:04.124: / / 62896, 2E5FCA3F803E, CCAPI, cc_api_call_cut_progress:

Interface = 0x3E9926D4, Indication of progress = NOT ISDN (1) across, Indication = INTERCEPT (2), signals

Value = 127

008298: Mar 1 17:10:04.124: / / 62896, 2E5FCA3F803E, CCAPI, cc_api_call_cut_progress:

Call Entry (Responsed = TRUE)

008299: Mar 1 17:10:04.124: / / 62895, 2E5FCA3F803E, CCAPI, ccCallCutProgress:

Indication of step = NOT ISDN (1) across, Signal Indication = INTERCEPT (2), Cause Value = 127

Voice call send alert = FALSE, entry calls (alert sent = FALSE)

008300: Mar 1 17:10:04.124: / / 62895, 2E5FCA3F803E, CCAPI, ccCallCutProgress:

Call Entry (Responsed = TRUE)

008301: Mar 1 17:10:04.124: / / 62895, 2E5FCA3F803E, CCAPI, ccConferenceCreate:

(Raytheon = 0xFFFFFFFF, callID1 = 0xF5AF, gcid = 2E606667-DF3111E5-8041E9BB-423D3151, tag = 0 x 0)

008302: Mar 1 17:10:04.124: / / 62896, 2E5FCA3F803E, CCAPI, ccConferenceCreate:

(Raytheon = 0xFFFFFFFF, callID2 = 0xF5B0, gcid = 2E606667-DF3111E5-8041E9BB-423D3151, tag = 0 x 0)

008303: Mar 1 17:10:04.124: / / 62895, 2E5FCA3F803E, CCAPI, ccConferenceCreate:

Conference Id = 0xFFFFFFFF, call = 62895 Id1, Id2 appeal is 62896, Tag = 0 x 0

008304: Mar 1 17:10:04.128: / / 62895, xxxxxxxxxxxx, CCAPI, cc_api_get_xcode_stream:

008305: Mar 1 17:10:04.128: cc_api_get_xcode_stream: 4982

008306: Mar 1 17:10:04.128: / / 62895, xxxxxxxxxxxx, CCAPI, cc_api_get_xcode_stream:

008307: Mar 1 17:10:04.128: cc_api_get_xcode_stream: 4982

008308: Mar 1 17:10:04.128: / / 62895, 2E5FCA3F803E, CCAPI, cc_api_bridge_done:

Conference Id = 0 x 877, Source = 0x40977FA8, Source Call Id = 62895 Interface.

Call destination ID = 62896, available = 0x0, Tag = 0 x 0

008309: Mar 1 17:10:04.128: / / 62896, 2E5FCA3F803E, CCAPI, cc_api_bridge_done:

Conference Id = 0 x 877, Source Interface = 0x3E9926D4, Source Call Id = 62896.

Call destination ID = 62895, available = 0x0, Tag = 0xFFFFFFFF

008310: Mar 1 17:10:04.128: / / 62895, 2E5FCA3F803E, CCAPI, cc_generic_bridge_done:

Conference Id = 0 x 877, Source Interface = 0x3E9926D4, Source Call Id = 62896.

Call destination ID = 62895, available = 0x0, Tag = 0xFFFFFFFF

008311: Mar 1 17:10:04.128: / / 62895, 2E5FCA3F803E, CCAPI, ccConferenceCreate:

Call the entry (Conference Id = 0 x 877, Destination Call Id = 62896)

008312: Mar 1 17:10:04.128: / / 62896, 2E5FCA3F803E, CCAPI, ccConferenceCreate:

Call the entry (Conference Id = 0 x 877, Destination Call Id = 62895)

008313: Mar 1 17:10:04.128: / / 62895, 2E5FCA3F803E, CCAPI, ccConferenceCreate:

008314: 17:10:04.128 Mar 1: confID:0 x 877; callEntry1 callID1:0xF5AF, type: 3; callEntry2 callID2:0xF5B0, type: 6

008315: Mar 1 17:10:04.128: / / 62896, 2E5FCA3F803E, CCAPI, cc_api_caps_ind:

Destination interface is 0x40977FA8, Destination Call Id = 62895, Source Call Id = 62896.

Caps (Codec = 0 x 1, Fax rate = 0 x 1, Fax Version: = 0, Vad = 0 x 1,)

Modem = 0 x 2, Codec bytes = 20, Type of Signal = 3)

008316: Mar 1 17:10:04.128: / / 62896, 2E5FCA3F803E, CCAPI, cc_api_caps_ind:

Caps (Playout Mode = 1, Initial = 60 (ms) playout, Playout Min = 40 (ms),)

Playout Max = 1000 (ms), Fax name = 300 (ms))

008317: Mar 1 17:10:04.128: / / 62895, 2E5FCA3F803E, CCAPI, cc_api_caps_ind:

Destination interface is 0x3E9926D4, Destination Call Id = 62896, Source Call Id = 62895.

Caps (Codec = 0 x 1, Fax rate = 0 x 2, Fax Version: = 0, Vad = 0 x 2,)

Modem = 0 x 0, Codec bytes = 160, Type of Signal = 2)

008318: Mar 1 17:10:04.128: / / 62895, 2E5FCA3F803E, CCAPI, cc_api_caps_ind:

Caps (Playout Mode = 1, Initial = 60 (ms) playout, Playout Min = 40 (ms),)

Playout Max = 1000 (ms), Fax name = 300 (ms))

008319: Mar 1 17:10:04.128: / / 62895, 2E5FCA3F803E, CCAPI, cc_api_caps_ack:

Destination interface is 0x3E9926D4, Destination Call Id = 62896, Source Call Id = 62895.

Version of caps (codec = g711ulaw (0x1), Fax Rate = (0 x 2) FAX_RATE_VOICE, Fax: = 0, ON(0x2) = Vad,)

Modem = OFF (0x0), Codec bytes = 160, Type of Signal = 2, Seq Num Start = 8134)

008320: Mar 1 17:10:04.128: / / 62896, 2E5FCA3F803E, CCAPI, cc_api_caps_ack:

Destination interface is 0x40977FA8, Destination Call Id = 62895, Source Call Id = 62896.

Version of caps (codec = g711ulaw (0x1), Fax Rate = (0 x 2) FAX_RATE_VOICE, Fax: = 0, ON(0x2) = Vad,)

Modem = OFF (0x0), Codec bytes = 160, Type of Signal = 2, Seq Num Start = 8134)

008321: Mar 1 17:10:04.128: / / 62895, 2E5FCA3F803E, CCAPI, ccCallNotify:

Mask of data bits = 0 x 7, Call Id = 62895

008322: Mar 1 17:10:04.128: / / 62895, 2E5FCA3F803E, CCAPI, ccCallNotify:

Mask of data bits = 0 x 7, Call Id = 62895

008323: Mar 1 17:10:04.128: / / 62895, 2E5FCA3F803E, CCAPI, cc_process_notify_bridge_done:

Conference Id = 0 x 877, call Id1 is 62895, call Id2 = 62896

008324: Mar 1 17:10:04.132: / / 62896, 2E5FCA3F803E, CCAPI, cc_api_voice_mode_event:

Call Id = 62896

008325: Mar 1 17:10:04.132: / / 62896, 2E5FCA3F803E, CCAPI, cc_api_voice_mode_event:

Call Entry (Context = 0x3F2AA3F8)

008326: Mar 1 17:10:13.376: / / 62895, 2E5FCA3F803E, CCAPI, cc_api_call_disconnected:

Value = 16, = 0x40977FA8, Id = 62895 Call Interface

008327: Mar 1 17:10:13.376: / / 62895, 2E5FCA3F803E, CCAPI, cc_api_call_disconnected:

Call the entry (Responsed = TRUE, Cause value = 16, Retry Count = 0)

008328: Mar 1 17:10:13.376: / / 62895, 2E5FCA3F803E, CCAPI, ccConferenceDestroy:

Conference Id = 0 x 877, Tag = 0 x 0

008329: Mar 1 17:10:13.376: / / 62895, 2E5FCA3F803E, CCAPI, ccConferenceDestroy:

008330: 17:10:13.376 Mar 1: confID:0 x 877; callEntry1 callID1:0xF5AF, type: 3; callEntry2 callID2:0xF5B0, type: 6

008331: Mar 1 17:10:13.376: / / 62895, xxxxxxxxxxxx, CCAPI, cc_api_get_xcode_stream:

008332: Mar 1 17:10:13.376: cc_api_get_xcode_stream: 4982

008333: Mar 1 17:10:13.376: / / 62896, xxxxxxxxxxxx, CCAPI, cc_api_get_xcode_stream:

008334: Mar 1 17:10:13.376: cc_api_get_xcode_stream: 4982

008335: Mar 1 17:10:13.376: / / 62895, xxxxxxxxxxxx, CCAPI, cc_api_get_xcode_stream:

008336: Mar 1 17:10:13.376: cc_api_get_xcode_stream: 4982

008337: Mar 1 17:10:13.376: / / 62895, xxxxxxxxxxxx, CCAPI, cc_api_get_xcode_stream:

008338: Mar 1 17:10:13.376: cc_api_get_xcode_stream: 4982

008339: Mar 1 17:10:13.376: / / 62895, 2E5FCA3F803E, CCAPI, cc_api_bridge_drop_done:

Conference Id = 0 x 877, Source = 0x40977FA8, Source Call Id = 62895 Interface.

Call destination ID = 62896, available = 0x0, Tag = 0 x 0

008340: Mar 1 17:10:13.376: / / 62896, 2E5FCA3F803E, CCAPI, cc_api_bridge_drop_done:

Conference Id = 0 x 877, Source Interface = 0x3E9926D4, Source Call Id = 62896.

Call destination ID = 62895, available = 0x0, Tag = 0 x 0

008341: Mar 1 17:10:13.376: / / 62895, 2E5FCA3F803E, CCAPI, cc_generic_bridge_done:

Conference Id = 0 x 877, Source Interface = 0x3E9926D4, Source Call Id = 62896.

Call destination ID = 62895, available = 0x0, Tag = 0 x 0

008342: Mar 1 17:10:13.376: / / 62896, 2E5FCA3F803E, CCAPI, ccCallDisconnect:

Value = 16, Tag = 0x0, entry calls (previous disconnection Cause = 0, remove the Cause = 0)

008343: Mar 1 17:10:13.376: / / 62896, 2E5FCA3F803E, CCAPI, ccCallDisconnect:

Value = 16, entered calls (Responsed = TRUE, Cause value = 16)

008344: Mar 1 17:10:13.376: / / 62896, 2E5FCA3F803E, CCAPI, cc_api_get_transfer_info:

Number of transfer = NULL

008345: Mar 1 17:10:13.376: / / 62895, 2E5FCA3F803E, CCAPI, ccCallDisconnect:

Value = 16, Tag = 0x0, entry calls (previous disconnection Cause = 0, remove the Cause = 16)

008346: Mar 1 17:10:13.376: / / 62895, 2E5FCA3F803E, CCAPI, ccCallDisconnect:

Value = 16, entered calls (Responsed = TRUE, Cause value = 16)

008347: Mar 1 17:10:13.392: / / 62895, 2E5FCA3F803E, CCAPI, cc_api_call_disconnect_done:

Available = 0, Interface = 0x40977FA8, Tag = 0 x 0, Call Id = 62895,

Call the entry (disconnect Cause = 16, class voice Cause Code = 0, retry count = 0)

008348: Mar 1 17:10:13.392: / / 62895, 2E5FCA3F803E, CCAPI, cc_api_call_disconnect_done:

Call interrupted event sent

008349: Mar 1 17:10:13.392: //-1/xxxxxxxxxxxx/CCAPI/cc_free_feature_vsa:

008350: 17:10:13.392 Mar 1: cc_free_feature_vsa release 21CF53A0

008351: Mar 1 17:10:13.392: //-1/xxxxxxxxxxxx/CCAPI/cc_free_feature_vsa:

008352: 17:10:13.392 Mar 1: free vsacount is 6

008353: 17:10:13.396 Mar 1: ISDN Se0/0/0:23 Q931: TX-> the DISCONNECT pd = callref 8 = 0x035A

Because I = 0 x 8090 - Normal call clearing

008354: 17:10:13.676 Mar 1: ISDN Se0/0/0:23 Q931: RX<- release="" pd="8" callref="">

008355: 17:10:13.676 Mar 1: ISDN Se0/0/0:23 Q931: TX-> the RELEASE_COMP pd = callref 8 = 0x035A

008356: Mar 1 17:10:13.676: / / 62896, 2E5FCA3F803E, CCAPI, cc_api_call_disconnect_done:

Available = 0, Interface = 0x3E9926D4, Tag = 0 x 0, Call Id = 62896,

Call the entry (disconnect Cause = 16, class voice Cause Code = 0, retry count = 0)

008357: Mar 1 17:10:13.676: / / 62896, 2E5FCA3F803E, CCAPI, cc_api_call_disconnect_done:

Call interrupted event sent

008358: Mar 1 17:10:13.676: //-1/xxxxxxxxxxxx/CCAPI/cc_free_feature_vsa:

008359: 17:10:13.676 Mar 1: cc_free_feature_vsa release 21CF6440

008360: Mar 1 17:10:13.676: //-1/xxxxxxxxxxxx/CCAPI/cc_free_feature_vsa:

008361: 17:10:13.676 Mar 1: free vsacount is 5

008362: Mar 1 17:10:20.876: / / 62839, B9B65DF08291, CCAPI, ccGenerateToneInfo:

Stop your finger = FALSE, tone = Null,

Tone management = sum network, Params = 0 x 0, Call Id = 62839

008363: Mar 1 17:10:20.880: / / 62886, B9B65DF08291, CCAPI, cc_api_call_feature:

Star Type = 50, = 0x40977FA8, Id = 62886 Call Interface

008364: Mar 1 17:10:20.888: / / 62886, B9B65DF08291, CCAPI, cc_api_call_facility:

Interface = 0x40977FA8, Id = 62886 Call

008365: Mar 1 17:10:20.888: / / 62886, xxxxxxxxxxxx, CCAPI, cc_api_ha_call_active_notify:

008366: Mar 1 17:10:20.888: mainst_callID:0xF5A6, peer_callID:0xF577, confID:0 x 876 call_info, spi_type:4, media_flo_thru:1, num_streams:1, swmtpmsp_present:0

008367: Mar 1 17:10:20.888: / / 62886, xxxxxxxxxxxx, CCAPI, cc_api_ha_call_active_notify:

008368: 17:10:20.888 Mar 1: stream [0]: callid:0xF5A6, media_passthrough:0

This is your error message:

008296: 17:10:04.124 Mar 1: ISDN Se0/0/0:23 Q931: RX<- progress="" pd="8" callref="">

Because I = 0x82FF - error of interoperability; unspecified

Tuition I = 0 x 8281 - call ISDN not end-to-end, can have information in the Strip

and receipts from your provider

Check your provider what await them under the dialed in, and what they expect of send you, they you say when you talked to them?

Tags: Cisco Support

Similar Questions

  • Unable to dial out in China blackBerry smartphones

    My att Curve 8300 is unlocked, but I am unable to dial a number, however, I can receive calls. I am in China. I put the Sim Card in

    another phone unlocked and it works. When I check my BlackBerry is displayed:

    SIM card: Security-disabled (this upper part is in the locked description, but what follows is unlocked order) why?

    ID #.

    Customization that all read people with reduced mobility.

    I have entered my code to unlock the phone twice, and I thought if I do and it will fail for the third time he will self-destruct... or it will be

    always be locked. Any clarity will be appreciated. Thank you.

    I use a China Mobile Sim Card. Maps Sim works fine in another unlocked phone, I used for a test.

    The screen looks like this:

    SIM card: Security disabled

    Customization:

    Network disabled

    Network subset disabled

    Service Provider disabled

    People with reduced mobility

    Phone number:

    Unknown number

    I noticed the difference on the Blackberry page, is that the phone unlocked saidIM map: security disabled.

    so the readings of phone unlocked: Sim Card Sim Card No..

    Thanks for your reply.

  • BlackBerry Smartphones unable to dial from the phone book for blackberry storm

    Hi all

    I've just activated a storm BB via BES and the user is faced with this common problem

    When using the phone book to call, it shows error: we cannot dial this number, please, try again. This is the case for international numbers and the, but when he composed it manually by dials the number it works without any problem. Not sure if anyone has experienced this problem and fixed it.

    Any advice will be appreciated.

    Thank you.

    Look smart dialing options in the phone dial screen > Menu > Options > smart dialing and see if all the settings are correct for the device and the geographic location of the user.

  • VPN clients are unable to access internal resources

    Hello

    I have problems with internal resources from access to the content of VPN Clients. They connect using Cisco VPN Client, they connect correctly, an IP address from the correct range is given and I ping to the internal server, but any other type of access as Server terminal server. Ping to server ip from the inside is answered by interface router public ip instead of the internal server and I don't know if it's this way. There isn't any ACL applied.

    Crypto ipsec debugging I see this error when I do the server terminal server:

    % CRYPTO-4-RECVD_PKT_NOT_IPSEC: Rec'd package not an IPSEC packet. (ip) vrf/adr_dest = / public-ip, src_addr = 172.16.73.4, prot = 6

    Here is the configuration associated with vpn:

    crypto ISAKMP policy 10

    BA aes 256

    preshared authentication

    Group 2

    !

    Configuration group customer isakmp crypto VPN_Clients

    Cisco key

    DNS 4.2.2.2

    pool - vpn clients

    ACL 101

    netmask 255.255.255.0

    !

    !

    Crypto ipsec transform-set RIGHT aes - esp esp-sha-hmac

    !

    Crypto-map dynamic dynmap 10

    Set transform-set RIGHT

    market arriere-route

    !

    !

    card crypto mymap client authentication list userlist

    Group card crypto mymap isakmp authorization list

    client configuration address map mymap crypto initiate

    client configuration address map mymap crypto answer

    map mymap 10-isakmp ipsec crypto dynamic dynmap

    !

    !

    ! Gateway for the default internal resources

    interface Vlan72

    IP 172.16.72.1 255.255.255.0

    no ip proxy-arp

    IP nat inside

    IP virtual-reassembly

    !

    Kind regards.

    VPN client IP local pool 172.16.73.2 172.16.73.10

    !

    !

    interface Dialer1

    the negotiated IP address

    IP mtu 1492

    NAT outside IP

    IP virtual-reassembly

    encapsulation ppp

    Dialer pool 1

    Dialer-Group 1

    Authentication callin PPP chap Protocol

    PPP chap hostname XXXXX

    PPP chap password 7 XXXXXXXX

    accept dns ipcp PPP

    PPP ipcp address accept

    No cdp enable

    crypto mymap map

    access-list 101 permit ip 172.16.72.0 0.0.0.255 any

    !

    Hi Anotino,

    Problem seems to be with the NAT configuration on the router. The NAT config is now below:

    access-list 1 permit 172.16.72.0 0.0.0.255

    NAT_WAN1 allowed 10 route map

    corresponds to the ip address 1

    match interface Dialer1

    IP nat inside source overload map route NAT_WAN1 interface Dialer1

    We need to change it to look like this:

    access-list 100 deny ip 172.16.72.0 0.0.0.255 172.16.73.0 0.0.0.255

    access-list 100 permit ip 172.16.72.0 0.0.0.255 any

    NAT_WAN1 allowed 10 route map

    corresponds to the IP 100

    IP nat inside source overload map route NAT_WAN1 interface Dialer1

    This should make sure to go to the pool of clients VPN traffic United Nations concerns and therefore, you should be able to access the network using the private IP (172.16.72.2 for example).

    Try this and tell me if this solves your problem.

    Kind regards

    Assia

    Post edited by: Assia Ramamoorthy small correction in the post!

  • BlackBerry Smartphones unable to synchronize Internal Error #4238

    Synchronization of every day without any problem, today I get error notice that says: ON FOUND of DUPLICATE RECORDS Of the DEVICE... When I open the configuration tab and view the log , it contains a list internal error 4238. with not many options. I restarted my computer, I have restarted my BB, out the battery and replaced, without success. Help!

    I found a few things and was able to solve this problem.

    1. Go in sync / Configuration - VIEW the LOG and see where the error occurs.  In my case, it's the calendar.  But in other cases, it may be contacts.
    2. Get sync and go in the backup and restore, click Advanced.  Right SIDE, you will see the device databases - choose the offending database (calendar in my case) and clear it, then close out of the window.
    3. Come back in SYNCH - CONFIGURATION and try again.  If it STILL does not respond, repeat step 2, then you might want to try and device overright - IE choose one-way simple config Outlook of device as indicated in the previous post.
    4. Once its done successfully, you can reset all the sync options back to normal (back to 2 say synch etc..)

  • BlackBerry Smartphones unable to dial # with touchpad when he's on call

    When you try to set up my voice mail, or requiring any number # required extensions or passwords. On the screen there is no option. When a call is connected and I bring up the keyboard are the only available options *, 5.1, 0. There is no other # s listed. There are a few linsted letters in gray D, G, J, M, P, T, W, but are inaccessible.

    Is there a setting that I pressed by mistake that prevents me from dial # s when, on a call? bug?

    ckorneluk wrote:

    Thank you for your help. This works well, but what a terrible way to type messages. I don't like SureType keyboard configuration or the keyboard to type. This configuration of DIRT is why I got the Storm 2.

    subject of SureType, I suggest you take a day or two to discover. I really like it and type fast enough with it.

    You can keep the portrait mode SureType and QWERTY for the fashion landscape.

  • Unable to cancel internal demand

    Hi all

    I am facing problem by cancelling an internal requisition. I tried tools > control function but still get a pop up "no action of control on this document. I checked there is no ISOs created from this IR I'm using Oracle R12.1.3.

    Need your urgent help on this...

    Thanks in advance

    GHG.

    Hello

    Please see the id note - impossible to close or cancel domestic demand (Doc ID 370604.1)

    I suspect that there is internal sales order record in the interface of order import.

    Depending on the features, system not allow you to close final or cancel a line of domestic demand when it is waiting for sales order in the import command interface.

    Please check and come back back in case you need assistance.

    Thank you best regards &,.

    Piyush Kudawale

  • ESXi Server, unable to use internal Hp dat

    Hi all...

    fresh user of instant messaging on Esxi, so pls be patient

    I just installed esxi 3.5 on HP ProLiant ML370 G5, everything works fine (installed a VW with Win 2 k 8), but I'm not able to see dat hp on the hardware of the server and (obviously) on configuration VW.

    Can some1 pls help me?

    Ty in advance

    Best regards

    Airuzzo

    PassThru USB does not work on ESX or ESXi.

  • IPSEC VPN crossed/Uturn problems internal net connections

    I have an ASA 5505 I connect remotely.  I use it as a remote IPSEC VPN with crossed/uturn to allow me to surf the Internet with my IP address.

    I can't access one of the internal computers on my home network.  I was able to do it successfully in the past on an older IOS SAA, but I am now on a new ASA 8.2 running (1) and I am unable to connect internally.

    I would like to connect my Slingbox and Tivo which is my home.  I tried to ping the boxes and no luck.  In the past, when it worked I was able to ping devices.

    I enclose my config.

    Thanks in advance.

    Jon

    Jon,

    If you are able to PING 192.168.1.1 VPN client, it means traffic reaches right inside the interface of the ASA.

    Now, the ASA must forward packets to 192.168.1.6 when received.

    Follow these steps:

    Just add the keyword to the outside

    to this statement:

    NAT (outside) 1 192.168.2.0 255.255.255.0 outside

    Try again. If this does not work, make sure that the only NAT statements you have are the following (you can copy and paste):

    permit ip 192.168.2.0 access list NAT0OUT 255.255.255.0 192.168.1.0 255.255.255.0

    permit 192.168.1.0 ip access list NAT0IN 255.255.255.0 192.168.2.0 255.255.255.0

    no global (inside) 1 interface

    NAT (inside) 0-list of access NAT0IN

    NAT (inside) 1 192.168.1.0 255.255.255.0

    NAT (outside) 0-list of access NAT0OUT

    NAT (outside) 1 192.168.2.0 255.255.255.0

    Federico.

  • Can I still call the phone numbers?

    I kept only Skype because I can dial international telephone numbers and save them - to the client sessions, etc. I just got a new computer with Windows 10 and Skype version 2.15 and I don't see a place where I get a touchpad and dial a number. It seems that I have to sign in to my account and add a number from my contacts, then return to my contacts in Skype and call from there.

    Hello

    The integrated customer didn't call feature phones yet. Download Skype for Windows client desktop from here.

  • My Qosmio X 870 - 14 d heats up in 10 minutes

    Hello.

    I myself Qosmio X 870-14 t. It heats up in 10 minutes, even if I play most basic games and stops. Heat the CPU reaches 90 and it closes. I have send to warranty 3 times in 2 months. They update and simply send it back. Toshiba just don't like.

    What can I do guys? I really need to fix it. But in my country, the Toshiba support is horrible.
    What can I do about it?

    Hello

    Generally, the laptop overheats because the internal parts produce too much heat or cooling modules internal don t work properly and is unable to cool internal parts.

    Why the internal parts would produce too much heat? Well, this can be possible if you want to use graphics drivers that are not designed for mobile use.
    For example the drivers from nVidia or ATI don t support GPU overheating protection. These drivers allow the GPU to run with the best performance (if necessary). This could lead to more heat dissipation and finally overheating.
    Published on the pages of Toshiba GPU drivers are changed to the use of the laptop and support this kind of protection.

    Why cooling fans can cool the parts?
    Especially because of the dust inside the vents to laptop. It would also be possible that cooling vents and fans are clogged with dust and don't twist not properly and air can circulate properly. In this case, the laptop must be cleaned.

    Finally, it might be possible that the thermal grease that is placed between module of cooling CPU isn't good enough or parched. This would also affect the cooling of the processor and would lead to a higher temperature.

    So, as you see, there are many reasons why cell phone may overheat.

  • question of 3102 - cell phone access

    Hello

    I think to buy a SPA3102 after seeing the reviews that you can access from a mobile phone or fixed.

    My wife's family is from abroad, and I want to use my Voip provider free international calls when she calls from his cell phone or his job.

    I want to check that it is compatible with the following scenario.

    I don't have any phone PTSN service.  I've only voip services.

    I have a voip with unlimited international calling service.

    Can I set up one of the ports on the 3102 with my current provider of voip and the second port of the provision on the 3102 to use another service of voip (such as gizmo5 etc...).  My wife would dial the number of the gizmo from his mobile phone, enter a PIN and be able to dial internationally via free international voip service?

    As an alternative, is anyway to do this with just the voip provider (and not to worry the second digit)?

    I just changed my current voip service because ATT cancelled CallVantage.  I'm not very happy with the service, but I chose because it was the only one with unlimited calling in South America and had the ability to dial an access number to call for free from a mobile phone.

    I'd rather have a new voip service which has better quality, even if they do not have cell phone access, if I can get access the 3102 celll.

    Thanks in advance.

    The SPA3102 cannot fill of voip-to-voip call.  It only helps fill a voip with a line call (port FXO) call RTC.  You can optionally use the SPA3102 to fill a call to another service of voip so you interface ata of the other service to the SPA3102 FXO port.  Even if you do this it is not quite optimal, and you might have problems.

    Some voip providers don't allow you to configure your own card and insist that you use a locked card they provide.  Others don't have this restriction.

    When South America with VoIP calling, you may experience some severe quality problems according to the voip provider and the provider that they use to deliver and to end the call.  Day of the week and the time of day can also make a significant difference.  This probably has something to do with the bandwidth available to the supplier in the long term for South America.

    A nice benefit of the SPA3102 is that you can configure up to four additional outbound-only suppliers on the adapter and it allows you to use additional providers PAYG (pay per minute) and have a choice on appeal.

    I would try different vendors for a sampling of the quality of the voice to the destination (s) require you to find the right combination of voice quality of cost vs.

    Four distribution providers (pay per minute) to check out are CallCentric, future-nine, CallWithUs and OneSuite.   Future - nine and Callwithus have different quality levels (roads of termination) that you specify when you call the number.

    Suppliers also have "access numbers" that you can call without having to use a PIN, even though some have more than others and with future-nine numbers, you can also access their "calling card" function through access SipBroker numbers. Access numbers are nice because you can use them without having a physical voip service.

    With CallCentric, you can also get a CallCentric DID (incoming number) and configure your own inbound number private as an access number.  CallCentric has also a few South Americans is that you can set as your own private access number...

  • 5 routing VPN site

    Hi all

    I threw myself little in this project without a lot of lead in.  Basically, we have 5 sites

    Site A: HQ with ASA 5520

    Site B: Remote with 5505 with L2L at Site A

    Site C: Remote with 5505 with L2L at Site A

    Square D: distance with 5505 with L2L at the Site

    Site E: Remote with 5505 with L2L at Site A

    In an emergency, I had to get phone running systems when a T1 PTP line was cut at the beginning by the customer! I created a VLAN on each phone named 5505 and created the Tunnels of VPN L2L all return to the HQs 5520.  Everything was good in the neighborhood, phones were talking about main PBX server to HQ, we could compose and in no problem.  The problem is now the phone Vender tells us that we need routing between each site. We cannot compose between each remote site without using external number (whereas before you dial internal extensions in order to reach all other sites)

    Site B needs to talk to the PBX to C, D and E (A, obviously as well but that is already at work) and so on.

    I found topics dealing with 2 remote sites requiring a routing, however, with 4 that all need to routing to the other configs will very quickly very vast and complicated.  There is already extra virtual private networks to of the HQ 5520 who go elsewhere and a good amount of security configurations, so the config is already pretty decently sized.

    Is there a better way to do this, or should I start to write my setups now?

    If I understand your question, you need to configure a list of VPN networks on each VPN Ray and the hub.

    For example on the RADIUS B a crypto access list that is similar to:

    ip-> A B permit

    ip-> C B permit

    ip-> D B permit

    ip-E > B permit

    corresponding Cryptography ACL on the hub for talks would be like:

    IP-> B to allow

    IP C-> B permit

    allow the ip D-> B

    E-> B ip license

    Repeat for each Department accordingly.

    So basically your configuration crypto would ' t grow, only the ACL crypto.

    You can work with groups of objects to simplify the ACL crypt, in this case:

    Crypto ACL on Hub B:

    object-group VoIP-dst

    object A

    object C

    object D

    object E

    object-group VoIP-src

    object B

    permit ip src VoIP VoIP-dst

    And so on...

    Just make sure your config allows same-security-traffic intra-interface

  • BlackBerry Smartphones application error pop ups

    Hey! I need serious help-my blackberry 8520 (I know its not so fancy lol) takes me through a rough patch, its been six days now that I've had with countless uncaught exception: app error pop ups aftr 2 5 10 min evry - they seem to even just aftr I rebooted - this has affected my phone in a way that I can't make or receive of calls im unable 2 dial for a call or call the directory phone-essentially 2 somehow , my n 'yes' 'no' buttons do not work... pls help my BIS 2 abt expires

    Hi and welcome to the forums!

    Try to put your device in 'safe' mode and see if you can stabilize the instrument for the basic function.

    Have you recently added a third party application or upgraded your device operating system?

    Please post the error message "untrapped exception" together so we can help you get the best advice.  (Most contain specific information. (Example: "Eception Exception: Application rim_Bluetooth net_ (148) is unresponsive.'")

    Thank you

    Bifocals

    KB17877 How to start a smartphone BlackBerry in Mode safe

  • Problem with blackBerry Smartphones to Blackberry curve 9300 phone

    I am unable to dial any number in my device during call-out. When incoming phone calls, nothing happens in the handset (without ring) despite a complete ring at the other end (the appellant).

    After an interval of regular, pop up comes with the message of 'ECEPTION EXCEPTION' for different applications.

    At the time of the restart, the following message comes:

    "eception exception: Index11 > + 11.

    Please guide me immediately.

    You use BBSAK or JL_Cmder to wipe the device and then load the operating system on the device. Follow the instructions here:
    http://www.BlackBerryFAQ.com/index.php/How_do_I_wipe_the_BlackBerry_using_Jl_Cmder%3F
    To BBSAK, here is the link: http://bbsak.org/

    Since then, you will need to reload the operating system of the device, according to the first link above.

Maybe you are looking for

  • iPad Mini retina

    iPad mini retina is updated to latest IOS.  The voice of sari is on.  Yesterday the ipad, not long after that Sari has been activated, answer is no longer the touchscreen.  The iPad has been transformed and turn it on again and you couldn't drag the

  • Cannot configure GPIB in Windows Server 2008

    I installed the version 2.8 IEEE488 driver on a Windows Server 2008 computer.  I have successfully added a GPIB-ENET under Measurmeent and Automation Explorer interface; However, he does allow me to change the configuration of the interface.  I get t

  • Indexing VI Clone reference

    Hi all In a table of references VI (which can refer to several clones of a VI), on the search for a particular clone reference VI by using 'Search 1 D Array' output is always the index of the first clone of this VI, even if we seek other clones. Plea

  • whenever I have shut down my computer when I want to open up the homegroup stops conection

    When I stopped mt computer and then start it back up I have innovations cliick double right bar to access the homegroup, until it was even coneted the problem is solved and I have internet acsess. Anyone know whats ups with this? I have the 10 "aspir

  • I can't find OE DBX and WAB files

    I use memo to Bruce Hagen which details the creation of new files.