Unable to display up - sound and network quick icons

Similar Questions

• Satellite A100-253 - question on the display, the sound and LAN drivers

  After getting a fresh installation (windows XP) on my Satellite A100-253, I thought that I needed the latest drivers. Apperently the drivers from the Toshiba site are obsolete or do any work.
  Here are my problems:

  -Display drivers is not installed at all. Instead, I installed the Catalyst drivers from another site but the resolution will not go higher then 1280 * 800, where my screen works better @ 1280 * 1024. Where can I get decent display drivers so I can put a normal resolution?
  -J' downloaded audio drivers on the Toshiba site but the sound is worse then it was. Where can I get the best drivers?
  -LAN (no WIFI) drivers on the Toshiba site seem to only have a uninstall.exe. Where can I get for my local network actual installation files?

  Thanks for the help in advance.

  Born the

  Hello!

  1. drivers you can get on the site of Toshiba or live production.
  Where did you download the drivers?
  Maybe a BIOS update will solve the problem.

  2. it of the same as point 1; Toshiba or directly to manufacturing.
  But don t forget a notebook is not an entertainment system, and if you want high quality sound you need external speakers.

  3. this package contains the actual installation files, but you must install them manually. This may make you in the device, right click on LAN card Manager and update the driver.

  Good bye

• How can I get a Visual icon or display activity internet and network?

  In older versions on Windows, the internet/network icon showed a display indicating where there was traffic.  Is there a way to get that back?

  If not, anyone know of some nice little freeware/shareware?

  THX!

  Hello

  Thanks for posting in the Microsoft community.

  The description of the issue you want to monitor your network traffic. I'll be happy to help you on this question.

  I suggest you to download Microsoft Network Monitor 3.4 to monitor network traffic.

  Microsoft Network Monitor 3.4
  http://www.Microsoft.com/en-in/Download/details.aspx?ID=4865

  I hope this helps! Let us know if you are facing difficulties or have questions about Windows.

• Windows Media Player version 12 unable to display burn music and video on other media

  Hello

  I have Windows Media Player version 12 and when I try to burn my Playlist after inserting a blank DVD music videos play fine on a computer. However, when I try to play on a standard DVD (Samsung) drive that goes with your average TV, the reader does not recognize the audio and video files.

  Do I need to convert to a different format - and how, please.

  Thank you.

  Bluenose

  Hello

  Thanks for your reply.

  The audio tracks I have in my playlist in Windows Media Player (which is recorded as tiny .wpl file in my music folder Windows by default) cannot be burned to a DVD using Windows DVD Maker.

  In creation of Windows DVD, when I click on "Add of Items", I get a message saying "\Music\Playlists\myDVD.wpl is not a supported file type, and it cannot be imported.

  An advise, please?

  Thank you!

  =======================================
  For importation into DVD Maker... you need audio / music...
  the. WMA format is preferable, but others may work as well.

  Check your music folder and see if the current music files
  are archived here.

  The .wpl as 'myDVD.wpl' files are Windows Media
  Playlist of files... not real music files.

• My battery, sound and network icons have disappeared from the system tray. I tried to fix with some resolutions that I found on the internet, but still no go...

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  http://www.Vistax64.com/tutorials/106787-notification-area-system-icons.html

  Read the tutorial above.

  See you soon.

  Mick Murphy - Microsoft partner

• Satellite A500: problem with the driver of sound and display after update!

  A500 Windows 7-64 bit

  I download the latest driver (6.0.1.6048) sound and display driver (8.16.11.8973) and I have a few problems.
  The colors are too bright and the sound is too deep (as the middle are too low).

  Hello

  Then why you n t go back to earlier versions of the driver?
  In your case, I would recommend setting the operating system at the point of time at first, until you have updated the drivers.
  Usually, this should help to recover the old drivers again.

  Welcome them

• No laptop Asus sound and unable to watch videos on YouTube

  I have no sound on my laptop Asus (motherboard: ASUSTeK Computer Inc.. |)  | K73E processor: Intel (r) Core i3 - 2350 M CPU @ 2.30 GHz | CPU 1 | 782/100 mhz.)  I have Windows 7 64 bit.  I use Kaspersky Anti-virus 2014 and Malwarebytes Anti-Malware Version 1.75.0.1300.  Or a watch all the problems.   I have a ASUS can help me to restore the BIOS and Chipset driver installation and the Audio driver.  They said I should send to them, but it's out of warranty.  I followed the help on the Microsoft Web site for no sound.  My sound card does not appear that there was a problem.  I tried a headset and I am unable to hear any sound.  I can play the video except YouTube what a mistake.  If anyone can help I'd be very happy.   Otherwise I'll have to take in a computer store to get fixed.  Right now I need my computer because I am looking for a job.  Thank you.

  OK, I had similar problem and it was actually a lot easier to solve, then I thought. Maybe it will work for you.

  Right click on the speaker icon in the lower right

  Click playback devices

  Click the speakers

  Click on properties

  Click on advanced

  Then click on default settings

  Worked for me, good luck

• Unable to display the results of a detailed report or the results of a questionnaire which is inbedded in the project.  I checked the preferences of quiz and enabled for the draft declaration.  I use SCORM 1.2.  My LMS is not listed (MCN) and so I chose '

  Unable to display the results of a detailed report or the results of a questionnaire in a bed within the project.  I checked the preferences of quiz and enabled for the draft declaration.  I use SCORM 1.2.  My LMS is not listed (MCN) and so I chose 'other LMS standard.  Any ideas on why I see the results?

  Publish your SCORM SCORM Cloud and test if it will show you the results you want.  If so, then your problem is with your LMS.  If this is not your problem may be due to something in the settings of your current project.  Eliminate one thing at a time.

• quick question on the DMZ and networking

  Need help please, I am a newbie to vm and need quick help...

  I have a well-configured firewall and 1 Server ESXi 5.5 configuration to test only at home...

  My firewall has 2 ports for internal network and one connected to my ISP

  I have the internal ports

  Port LAN ip 1 local schema with DHCP server running on the firewall

  Port 2 is DMZ, I have 4 static ip to use for remote mail, web server

  on an ESX Server, I have 2 NICs 1 plugged into port DMZ and LAN 1 port firewall

  What is the best way to separate these 2 and make them work

  internal vms example has no access to the DMZ and will have no LAN NIC, added to the virtual machine

  But Web servers and mail server should have connected NIC times and each nic gets entered the appropriate IP address based on what network card and the network it uses

  Can I use 1 switch vm and vm 1 network? or 1 vm change and create 2 networks? How to configure NIC and vmnetworks to communicate properly?

  Since you have two separate network, an in-house cards and a demilitarized zone, you will need two vSwitches. Each with a network card. The first will be your internal network and management, the other for the demilitarized zone.

  Then, you will need to create the appropriate exchanges.

• Sounds and control panel of Audio devices - the speaker settings & gray device Volume

  System restore point created and then installed audio & video drivers from Microsoft Update.  Lost audio & fucking video, speaker in the system tray icon disappeared.   Tried to go back to a restore point, but system says that there was a problem and he is unable to restore my system to a restore point and no action was taken.

  What I did:

  1. Went to Creative & Nvidia and got the latest drivers and installed OK.
  2. Device Manager shows no problems.
  3. A ran Microsoft FixIt.  No problems found.
  4. DirectX diagnostic ran.  No sound on all the tests.
  5. Open 'Sound and Audio Devices Properties' Panel.  On the Volume tab, "Device Volume" & "The speaker settings" are grayed out.  Slider is set to low or non-existent and "speaker" icon is deselected.  "Audio" tabs & 'Voice', have selections SB X - Fi Audio as default devices.  'Hardware' tab has all the devices activated and functioning properly.
  6. As the loss of his is systemic, I checked the BIOS and he had disabled his, so I enabled it, but suspect it is for his mother integrated.
  7. Activated the Windows Audio Service, restarted and assured, it starts automatically at windows startup.
  8. Restored sndvol32.exe from the Windows XP installation disc.

  Nothing has been able to restore all the sounds from my system.  Any other ideas?

  System details:

  Dell XPS 400 card, Windows XP Pro SP3, Creative Sound Blaster X - Fi Extreme Music

  Hi Jim384.Whenever I had a sound problem, I go to the Device Manager open the audio video and game controllers. In the list, you should see peripheral audio. Right click and uninstall it. Close all applications and restart the system. When the system reboots it should detect the hardware as a new device and proceed to load the material. Probably wouldn't hurt to run the program below. Click on the link, download it and then start in safe mode with network and run the program. If there is no bug in there it will remove them.

  http://www.Malwarebytes.org/

• Sounds and Wi - Fi are unusable after the awakening of Windows XP SP3 of stand-by

  original title: XP SP3 cannot wake up from standby correctly

  I recently upgraded my system from Windows XP SP2 to SP3 and installed onenote 2010 professional office 2010 but still not active. I found if I maintain my system, and cannot be used as alarm clock, sound and wireless.

  When I click the speaker button, I can hear the sound of 'Bang', which implies a mistake, and a pop-up box displays saying that «...» No audio mixer table cannot be found... ». I can't play music or watch the video.

  When I find out wireless available in the range, he said: "another program manages wireless" these words. But I have installed no utility to manage my wireless.

  There could be another problem. So far, I find just above two.

  After the system restarts, everything is recovered, until next time, I stand by my system.

  Hi Edwin.Xi,

  Given that you have upgraded your system from Windows XP SP2 to SP3, you may need to consult the manufacturer's Web site and download and install the latest version for Wi - Fi and sound drivers and check if that helps:

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

  You can view the following articles in the KB for more information:

  How to solve the problems of hibernation and standby in Windows XP

  http://support.Microsoft.com/kb/907477

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• MacPro 2009 suddenly lost sound and the start-up time is more than a minute

  Hi just a couple of days my MacPro in early 2009 has started to take well over a minute to start when she used to take less than 30 seconds.

  Around the same time, I lost the sound of my Analog Audio Line out port.  (Don't know if there is any connection.)

  I can still use my head set for its ok when plugged into a USB port.

  When I go to the sound pane there is no visible line output port.  I have a Boise radio connected to the line port, having the sound transmitted by the intermediary for the auxiliary voltage on the radio.  It has been working well for many years.

  I tried to plug into a spare set of powered speakers, the choice of output Line Out appeared in the pane sound but still cannot get any sound from the speakers when I chose it.

  The loss of the noise is a nuisance, but I can still use my head set.

  It is the slow-start up that bothers me, although once it has finally started the computer works very well and reacts quickly.

  Something has changed dramatically, and I feel that something happens and it doesn't bode well for me.

  Hope someone can give me some good news and a difficulty.

  Thank you

  Try to open disk utility and repair the drive.

  Also, consider posting a report of EtreCheck. This can help us to get to the bottom of your sound issue as well. http://etresoft.com/etrecheck

• Is it possible to cut all the sounds and haptic feedback when the iPhone is connected to Carplay Apple?

  Is it possible to cut all the sounds and haptic feedback when the iPhone is connected to Carplay Apple?

  While driving, I noticed that all the comments navigation are also sent to my phone, creating a distraction while driving. Is there an automatic way to stop sending alerts to my watch whil the iPhone is also connected to Carplay?

  If this is not the case, consider this as your comments/request. If there is, please share. I do not want to switch manually and on all notifications when you use Carplay.

  Best regards

  Q

  Hello

  It may help to place your watch in mode do not disturb before driving:

  -On your watch: when the time display, drag upward on the dial of the watch > drag left/right to the gaze of settings > tap the moon to turn do not disturb on and outside.

  You can also disable mirroring for do not disturb mode. When mirroring is enabled, turning on do not disturb on your watch also automatically her allow on your iPhone.

  -On your iPhone, in the application of Eve, go to: Watch My > General > do not disturb - turn the market / stop iPhone mirror.

  To send comments and/or service requests to Apple, you can submit the form here (all comments are read):

  https://www.Apple.com/feedback/watch.html

  (This is a supportive community focused on user - you don't talk to Apple here).

• Unable to connect to other wireless networks

  RE: Unable to connect to other wireless networks

  • My computer is a HP Pavilion dv7 1232nr Entertainment Center
  • My OS is Windows Vista 64 bit
  • I have installed many things over the past year, but know that at some point, I was able to get on free Wi - Fi in hotels

  I am able to connect to my network, but when I try to connect to others, I'm unable to do. I have their password and my computer SHOWS I have a connection, but actually I'm not. When I try to connect to the Internet, the server is not found. I called the support/supplier for the last network owner and he told me that even if I "thought" I was online, I really wasn't. He said that it is probably a router configuration for that person that does not correspond to my computer. As I was just visiting, of course I didn't mess with their router. This happened to me twice, with once the provider is the same as mine, but the only way I could get connected with a hard link.

  So far, the only thing I did is to see if I could connect to free wireless (municipal library) and was unsuccessful. I think the problem is with my settings, but am not sure. I have to be careful to change anything because I can't afford to lose my connection at home because my job depends on it.

  Any suggestions?

  Thanks for any advice you might be able to share.

  Hi, Pat:

  I am very confident that if you download and install the driver from the link below, your problem will be solved.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & CC = US & prodTypeId = 321957 & prodSeriesId = 3688868 & swItem = ob-99392-1 & mode = 3

  Paul

• TE2000 - screen turns on and off quickly

  Hi all

  My TE2000 was wrong flashing. The screen turns on and off quickly, sometimes every second quarter or so, it seems, so bad that I can hardly read the display. It's like someone is pressing the lid-switch very quickly.

  It happens sporadically. Sometimes it won't happen for a few minutes. Other times it flashes just once or twice, and still other times, it becomes unbearable and continues for minutes at a time.

  Someone has an idea of what could be the cause? I looked into the screens of replacement on e - bay and cannot find a lot...

  Hello

  Have you tried to check if this problem also appears on external monitor?
  Not? Try to do that! If it doesn't appear that on the screen TFT internal display then it s not a graphics chip malfunction but display or a failure of inverter FL.

  Looking for a second hand TFT screen?
  It seems that the laptop TE2000 supports a 14.1 "1024 x 768 TFT color screen
  Therefore, you can use each view of each laptop that supports the 14.1 screen size

  Good luck