Satellite A100-253 - question on the display, the sound and LAN drivers

Similar Questions

• Satellite A100-906: Question on the processor and HARD drive temperature

  Hey guys,.

  I want to ask u for the level of normal temperature of this laptop? I want to know the temperature of the CPU (1,2) and the temperature of the HARD drive, because I think that my laptop is overheating and it is a problem for me :/ (my temperature is now around 50 for the 2 hearts and nearly 40 for hard disk) Is this ok or? Ty ;)

  Hello

  Believe me, the 50 degrees C for the CPU and C 40 degrees for the disk HARD is a normal temperature! It's rare!
  On my laptop the CPU temperature increases up to 60 degrees C if no application works.

  But be aware that the temperature varies.
  If you run different applications on the laptop, the performance of the processor will be increased and the temperature rises.
  That is a fact.

  There is nothing wrong GUY ;)

• Satellite A100-253: what is the latest version of the graphics driver

  Hello

  I bought a Toshiba A100-253 and I want to upgrade the driver for my ATI Radeon Mobility X 1600. What is the latest driver?

  HI Benoit,.

  There are currently three downloads available for the SA100 according to the model of the series, although only two have been with ATI graphics cards: -.

  For the series of PSAA2 - the most recent driver is 8.162.050803A2

  For the PSAA9 series - there are two drivers ATI, the last being 8.241.034065C

  The third download refers to the series of PSAA8 and is for graphics cards Intel (14.18.2.4436)

  You can download these drivers from the web site of Toshiba (Support section and download).

  Kind regards

• Satellite A100-033: I disabled the touchpad and now Fn + F9 won't allow

  I have a Toshiba Satellite A100-033 running Vista Home Basic. I use especially the laptop as a desktop replacement, and I do not like use the touchpad I disabled it, and instead, I use an external mouse via a USB port.

  I don't know if I disabled the touch pad by pressing Fn + F9 or by any other means (if it was by some other means that I forgot what it was). Recently, I wanted to re-enable the touchpad so that I could use the laptop outside the home. However, I found that by pressing Fn and F9 don't re - not allow the touchpad and I now can't use the touch pad at all.

  If I go into the properties of the mouse (in Control Panel), that tells me that my synaptics pointing device is enabled. If I go into Device Manager and look at 'mouse', I thought that my touchpad works properly.

  All this makes me suspect that the problem is not a hardware failure, but I changed a few settings, so that my touchpad is permanently disabled until I change the setting back to its original state.

  Help!

  Hello

  One of the solutions would be a system restore you could try to set the operating system to the point of time at the beginning. Perhaps that would help reactivate the touchpad.

  Conversely, you can try to reinstall the drivers for the Touchpad firstly I would recommend removing it from the Device Manager and then after restarting, you can try reinstalling the drivers downloaded!

  I would appreciate any comments from you

  Good bye

• Satellite A100-692: upgrade of the disk and issue stop Wlan

  I always have problem when I intend to turn off and a message says that my wireless Intel don't want to shut down now and I have to click on the button to immediately turn off? Can someone help me?

  And another question: I saw on the Internet, there are a few new Slotload DVD DL DVD + / pioneer, Panasonic. Can I change my Combo (Pioneer too) with the above (I love Slot load DVD Combo)? No problem with the garranties?

  (1.) I put t know if it helps but you can try to reinstall the Wlan driver.

  2.), you must know that not all readers are compatible and supported on the laptop. The best way is to contact Toshiba service partner in your country if you wish to order the compatible reader. It is important because of the csel/slave/master settings.
  If the drive has wrong settings of the BIOS will not recognize the device

• Satellite A100-599 - question about updating the display driver

  Hello

  I have a Satellite A100-599 with a NVIDIA 7600go graphics card and I like most of you Bioshock game crashes because of some problems with the graphic card drivers, no pb... Meanwhile, NVIDIA has released some new patches for the Forceware and after I double checked the database of the Toshiba driver support I've seen a new version in the list of display driver for WinXp.

  One of them seems to be 13/09/2007. I have downloaded the drivers, installed them and then I checked the details of the driver in the Device Manager list and to my surprise the details say that the drivers are since 2006. I reinstalled the drivers and the same thing appeared. I checked the XML that was in archive of drivers and surprise... the drivers really are the 'old' of 2006. So my question is this: you have the display drivers for my model that work for Bioshock :D

  Best regards, Marian

  I Don t know if we. I think it would be took a long while to ask every single user: Hey, you have a few drivers for blackmodjo? Ah, come on, please. Some of them... ;)

  No, I have a better idea. It s like to cook a meal. Ingredients: DriverCleaner Pro and the www.laptopvideo2go.com site and... your your your TAAA patience

  To get a good 'bio' meal shocked just follow this recipe:

  Reach
  http://www.laptopvideo2go.com/
  read before doing anything (YES, even before you continue to BREATHE) the FAQ section on this site (RECOMMENDEDRECOMMENDEDRECOMMENDED)
  and then download the drivers. Do it, Yes...

  Then download drivercleaner by searching on www.google.com and THEN read their manual before doing anything else (Ok, you can continue to breathe..)
  After reading the manual you will be something like:

  1. program start, do something, restart the machine
  2. start in safe mode, from this program, deleting... yadayadayada
  3. install the new driver
  3. reading of Bioshock
  4...
  5. No... 6 thank. me and give me your first born... ;)

  So by cutting about 40% of my humorous things and following the constructive technical instructions from me, you will be able to play bioshock.

  Welcomes :)

• Satellite A100 - defective speakers, gives the crackling

  I have the Toshiba Satellite A100 model.
  My speakers do not sound right.
  Left speaker does not work.
  They give a crackling.
  Audio, video, doesn't sound right.
  Whenever I play a song it gives a feeling of speakers are blasted.
  When I turn the volume down they sound a little ok.

  Advice needed.
  I need to replace speakers or should I update the drivers?
  Thank you...

  After reading your ad, I think the speakers are defective and must be replaced.
  You can try to change some sound settings to see if something will change.

  In any case, I think driver has nothing to do with it and you need new speakers.

  Have you tested with headset or headphones? How does it work?

• Satellite A100 - will not charge the battery

  Hello

  I have ned to help. My Satellite A100 will not charge the battery. He works the power adaptor for the led indicates charging status, battery shows 1% of loading tatus information, but none does change - no loading any time. When disconnected everything just stops off like normal desktop.

  I've already put battery in and out, made upgrades to the antivir software, makes Toshiba controls, tests, but what ever he did did not any change. If there is no way for restoration of battery how to check what the problem is I have no second battery or AC I can always buy new batttery but I don't know if the old one is broken and weather new would work properly?

  Best regards
  pawelg

  Hi pawelg,

  I agree with the user above. The battery can be charged only up to 500 times, and after that, it must be replaced. I think it's the case now, I mean that everything works correctly on the AC adapter so I think that the battery must be the reason for this.

  By the way: you can buy a new battery to an authorized service provider. ;)

• Questions about the terms and conditions

  Dear team of Adobe Stock,

  I am considering a subscription for an e-commerce site that I am developing. I have a few questions about the terms and conditions:

  3.5 social media use. You can view or download an unmodified version of the book on the Social media Site if (A) you include a notice of copyright in the work itself (© author name - stock.adobe.com) and (B) the terms of use governing the Social media Site do not include any provision that would grant exclusive rights or the ownership of those works or alterations to anyone. "Social Media Site" means a website or application that puts the main emphasis on facilitating social interaction between its users and allowing users to share content in such social interaction

  What I have to insert in each post on social media on behalf of the author? Generally, this information is displayed only for free images. What I have to insert this information even if I signed up for a plan?

  Thank you

  Hello

  Please see the link below for help:

  http://wwwimages.Adobe.com/content/dam/ACOM/en/legal/servicetou/Adobe-stock-additional-ter ms_20160119.pdf

• A question about the methods and parameters.

  Hey guys, this is my first post here. I am very new to Java and done a bit of C++ before Java. I had a question about the methods and parameters. I do not understand the methods; I know they can be repeated when it is called, but it's almost everything. I also know that a program should have a class that contains the main method. What I really, really understand on methods is what the parameters are. I know they are in parentheses and that is it. Could you explain what they are? I really appreciate it. Thanks to all in advance. Best regards, Michael

  Taking an example:
  Suppose you calculate area of the rectangle you need two inputs one is the length and the width. Area = l X b, where l = length, b = width

  If your method, say, calculateAreaOfRectangle (length int, int width) will be two parameters as arguments.

  System.out.println ("field of rectangle:" + calculateAreaOfRectangle (40,30);)

  public int calculateAreaOfRectangle (int length, int width) {}
  int area;
  Area = length * width;
  return of area;
  }

  So if you call this method then the output will be returned in 120.

  Parameters of a method are simply the input variables for the method of treatment for all calculations or something useful.

  And we cannot have methods inside the main method in Java. It is in the java syntax and if you do, it will throw a syntax error.

• Question about the interruptions and priming

  Hello

  I had a few questions about the startup and interruptions in a virtualized environment

  Assuming that, plenty of virtualization (no material assistance to virtualization of memory ).

  1 initialization: in an ordinary PC, the boot process starts with the BIOS, to expansion ROM, back to the BIOS and MBR secondary boot record, then grub (is it) and finally the operating system. In a virtualized environment with VMM running directly on top of hardware (Native VMM), how is the initialization of the different process, as I understand it takes BIOS-> Expansion ROM - > BIOS-MBR-> other record secondary-> VMM-> OS--> applications >. Am I right on that?

  2 breaks: VMM examines the source interruptions prior to the interruption, so in a multicore environment, assuming a 2 processor core, how the VMM decides on the kernel for which the interruption in intended, prior to shipment of the interruption. Interruptions are tag ID, said core ID?

  Thanks in advance

  -SC

  sidc7 wrote:

  1 initialization: in an ordinary PC, the boot process starts with the BIOS, to expansion ROM, back to the BIOS and MBR secondary boot record, then grub (is it) and finally the operating system. In a virtualized environment with VMM running directly on top of hardware (Native VMM), how is the different boot process, if I understand correctly to -> BIOS-> Expansion ROM BIOS-> MBR-> other documents-->--> OS--> requests VMM. Am I right on that?

  It is simplistic but essentially correct.  A metaphor would be a little better thinking that the hypervisor/vmm is an operating system, except that the process on this operating system are requests or comments OSes.  If the BIOS-> OPROM-> BIOS-> MBR-> hypervisor-> init process of the hypervisor-> reviews of fork () s operating systems.  This can become blurred by the design choices (for example Xen/Hyper-V init start a coded parent hard partition that makes hypercalls privileged to fork() guest OSes; ESXi init runs a very limited subset of applications directly on the hypervisor and ESX Classic is somewhere between these approaches).

  There is a subtle distinction between "hypervisor" and "www."  The "hypervisor" is the operating system of single root (e.g. ESX) who interacts directly with the hardware and has access to everything; a hypervisor is not to be used to run virtual machines.  When we talk about a "hypervisor", the tendency is to describe something which is a BONE (although usually a minimal OS designed only to run virtual machines).  The "www" is the layer that allows a virtual machine run: it provides the interposition, virtualization and emulation services and can be plural (for example a vmm by guest operating system).  Architecture of VMware deal with these two separate components, while most other virtualization platforms merge the two.

  sidc7 wrote:

  2 breaks: VMM examines the source interruptions prior to the interruption, so in a multicore environment, assuming a 2 processor core, how the VMM decides on the kernel for which the interruption in intended, prior to shipment of the interruption. Interruptions are tag ID, said core ID?

  Strictly speaking, the interruption is not transmitted to a guest operating system - receives the hypervisor (or rather the VMM it transmits to the hypervisor), the hypervisor drivers interpret the interruption (for example reading package of NIC, I/O process of HBA, the timer tick completion), then after a new appropriate break in the guest OS.

• Is it possible to cut all the sounds and haptic feedback when the iPhone is connected to Carplay Apple?

  Is it possible to cut all the sounds and haptic feedback when the iPhone is connected to Carplay Apple?

  While driving, I noticed that all the comments navigation are also sent to my phone, creating a distraction while driving. Is there an automatic way to stop sending alerts to my watch whil the iPhone is also connected to Carplay?

  If this is not the case, consider this as your comments/request. If there is, please share. I do not want to switch manually and on all notifications when you use Carplay.

  Best regards

  Q

  Hello

  It may help to place your watch in mode do not disturb before driving:

  -On your watch: when the time display, drag upward on the dial of the watch > drag left/right to the gaze of settings > tap the moon to turn do not disturb on and outside.

  You can also disable mirroring for do not disturb mode. When mirroring is enabled, turning on do not disturb on your watch also automatically her allow on your iPhone.

  -On your iPhone, in the application of Eve, go to: Watch My > General > do not disturb - turn the market / stop iPhone mirror.

  To send comments and/or service requests to Apple, you can submit the form here (all comments are read):

  https://www.Apple.com/feedback/watch.html

  (This is a supportive community focused on user - you don't talk to Apple here).

• Express Port Replicator II and Tecra A10 - 12Z - only the power and LAN

  Since my Toshiba T3600CT I received with docking station, I discovered that I have a docking station. In the meantime, I had a small Sony who had no docking station, for which I got one of the first USB docking station and since then I've seen always to get laptops with docking station.

  But this time something went really wrong, the Toshiba Express Port Replicator II PA3680E-2PRP provides only power and LAN. There is no power in the USB ports, so no serial port or the sound, and DVI and VGA are also disabled.

  All these ports work fine on the Tecra A10, but not on the docking station.

  Of course, it is nice to have the power and LAN, but not when I expected too much of everything.
  So I was wondering if anyone has had a similar problem, it is like upgrading the BIOS for me who have not installed all the necessary software, or is it a fuse or something I could fix myself or is it a faulty docking that shouldn't have left the factory?

  Hello

  What's your Tecra pre-installed with original recovery image?

  When the laptop is preinstalled with recovery image simply connect compatible laptop Toshiba docking station and all the devices connected to the docking station will be recognized correctly and all available ports should work fine.
  Is that a Port Replicator basically "replica" ports on the laptop.

  On this virtual path, we cannot say that this port is 100% OK. What can you say about it? you bought is used a?

• When I connect the USB and LAN cable does not my trackpad

  Hey guys how are you.

  When I connect the USB and LAN cable does not my trackpad

  How can I fix this error. Please teach me.

  Which macbook model do you have?

  a USB mouse still works?

  your keyboard still works?

  No matter which USB port you use?

  No matter what USB device allows you to create this error?

• How to open the sounds and audio properties by using Labview

  Hi all

  How to open the sounds and audio properties of the control panel using the exe from system Labview vi.

  Y at - it all dll also open this property.

  If there is some dll which is which and how to program the dll to achieve my goal.

  Wow, you followed after a few...

  Open the command window is because to open the Control Panel, you need to execute it in the context of a shell, and it's what is done with the "cmd /c mmsys.cpl. To open the applet without using cmd you use RunDll32.exe, like this: