Unable to expand the virtual disk?

Similar Questions

• Unable to create the virtual disk: fault. RestrictedVersion.summary

  Hello

  Im trying to create a virtual disk using the CLI on ESX4i.  The script is:

  vmkfstools.pl - Server 10.190.2.51 - c 20 g d eagerzeroedthick - a free /vmfs/volumes/Internal/test.vmdk

  When the script runs I get error: unable to create the virtual disk: fault. RestrictedVersion.summary

  Can someone tell me why please.  Im trying to create a disk of 20 GB with adapter free with eagerzeroedthick on my internal called storage, (no subdirectory).

  The file system is THAT VMFS 3.33 maximum file size is 256 GB.  The block size is 1 MB.  If it is the block size that is the problem how can I easily change?

  It's in a laboratory, not a production environment.  I need the flag eagerzeroedthick like Im trying to create a passive active cluster node MSCS 2 on a single physical node with 2 machines VMS.

  Thank you.

  Mike.

  If you use the free version of ESXi (U4 and later versions), access to tools like the VIMA API are read-only.

  -Matt

  VCP, vExpert, Unix Geek

• takes forever to expand the virtual disk

  I am expanding my virtual disk using the pdf file;  "Resize a virtual disk for Windows clients."

  A few months ago, I used this tutorial to resize with success of 20 to 40 GB but now I need more space.  But something does not work at the moment.  I am stuck at part 1, step 5.  I downloaded the most recent vdiskmanager GUI (I think it's more up-to-date, it is dated from 18/06/2007) and launched the MISTLETOE, my hard file selected, choose 75 GB and results opens the window.  BUT it has now been about 45 minutes and as far as I can say that nothing is happening.

  It takes so long?  Any suggestions?

  Thank you

  Bonnie

  If the actual size of the existing virtual hard disk is close to full capacity of 40 GB then it can take some time to develop.  Also because it creates a new file (s) hard, you must also make adequate free space on the host HDD to finish the process and because you use a 3rd party utility to interface with the VMware real Fusion of the program that is doing the job, the actual process may have a problem and do not make it to the 3rd party utility.

  What version of Fusion are you using?  If 2.x you do not need the 3rd party utility and make a resizing of the setting of Virtual Machines

  You can use the activity monitor to see if the process is still ongoing and or if there is the disk activity as in the file is always written.

  VMware-vdiskmanager is what did increase it then look for vmware-vdiskmana (full name does not show in the activity monitor) and see what's under its weight.

• What is the right way to expand the virtual disk and then the OS partition?

  I have a Windows XP operating system in a virtual machine VMware.  I have

  you want to increase the size of the hard drive.  It currently has a 50 GB

  partition on a 50 GB VHD.  I increase the size of the

  50 GB to 100 GB in VMware virtual hard drive.  Then, can I use

  Windows disk management to increase the size of my partition of the

  side OS to use all the 100GB he sees now?  Or will

  corrupt my data or cause a problem as I really need to

  use a third party tool like EAUSUS inside Windows to extend Windows

  on the size of the virtual hard disk?

  In fact the way you describe, resize the virtual disk and then developing the partition are the way to go. But there are some things that you should be

  aware of.

  -If the VHD is on an IDE controller, you may not be able to resize the virtual disk. In this case use the converter. With the converter, you can resize the disk including the partition and - if desired - replace the IDE controller by a SCSI controller.

  -If you have only one partition under XP (that is, drive c :)) you cannot extend the partition with the diskmanager/diskpart. In this case, start your virtual machine from a CD/DVD Vista/Windows 7 in Repair Mode, open a command line and use "diskpart" from there to "extend" your partition.

  André

• Unable to reduce the virtual disk (Linux RHE 5.4) with converter standalone 4.0.1

  I recently did a V2V with VMware Converter 4.0.1 to move a virtual machine running Linux Red Hat Enterprise VMware Server 2.0 on ESX 3.5 5.4.

  I was surprised to be unable to change the size of the partition. I have a 20 GB partition but only 3 GB is used. So I would reduce it to have a 5 GB partition.

  How can I change the size of partition? I know with Windows, it works well, why with Linux can not do the same?

  Thank you

  Olivier

  Found that in the Manual:

  Limitations of VMware Converter STandalone according to the OS you run the converter on:

  If you run:

  • Windows Server 2003

  • Windows XP

  • Windows Vista

  • Windows Server 2008

  Here are the limitations:

  • Disk cloning only for Linux clients.

  • Reconfiguration or customization for Linux clients is not supported.

  • Installation of the VMware Tools for clients Linux is not supported.

  AWo

  VCP 3 & 4

  Author @ vmwire.net

  \[:o]===\[o:]

  = You want to have this ad as a ringtone on your mobile phone? =

  = Send 'Assignment' to 911 for only $999999,99! =

• Unable to connect to the virtual disk Service, Virtual Disk Manager Interface not registered

  I installed Windows 7 Ultimate on this laptop as a new installation about six months ago.  Since then, I don't think I ever ran diskmgmt.  Today, I joined a new external hard drive usb, it reported the drivers installed fine, but then the installation bombed at the beginning.  I went to verity, what had happened and has run diskmgmt.msc (as an administrator), but she came back with the message "Unable to connect to the virtual disk Service" and also a small OK msgbox appeared with the title "Virtual Disk Manager" and the "Interface not registered" message

  I disconnected the USB hard drive and tried again diskmgmt, but no change.

  I restarted in safe mode, tried diskmgmt, but no change.

  I ran sfc/scannow, but it has reported that it found no errors.

  I checked that the virtual disk service has been configured as a textbook in services.msc, and event viewer showed that when I ran diskmgmt he started VDS and then stopped VDS.

  I tried again, but still not like before.

  Is there some dll I can't regsrv32?

  Thank you

  Marc

  Hello

  I suggest you to return the items for the following responses from Microsoft, he says same issues with trying the troubleshooting steps and check if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/cant-start-disk-management-unable-to-connect-to/31898500-9d84-4CB5-9ba3-c1f42e3b1ace

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/problems-with-Vista-after-unplugging-by-external/093f1660-160F-478f-b81a-493e963ffd9a

  http://TechNet.Microsoft.com/en-us/library/cc771775.aspx

  Note: it also applies to Windows 7.

  Hope the information is useful.

• Save the number of the Virtual Machine: expand the size of the virtual disk of Guest OS affect the physical disk on the host operating system files?

  People,

  Hello. I use 3 Player VM and Guest OS Windows Server 2003. The host OS is Windows 7. I need to increase the size of the VM disk, so who can install several systems in the guest OS. If something bad happens during the expansion of the size of the virtual disk, the guest operating system and its Applications will not work. Thus, before expanding the size of the virtual disk, I need to back up the virtual machine hard disk external.

  I have check the disk hard host operating system Windows 7, the path is C:\VirtualMachine\WindowsServer2003\... When I get to the top of the virtual machine on the external hard drive, simply select the 'VirtualMachine' folder and save automatically. I have 3 questions as follows:

  First of all, if something bad happens during the expansion of the size of the virtual disk, the guest operating system and its Applications do not work. Can I just delete the folder 'VirtualMachine' in the host operating system?

  Secondly, the problem of the first question does not affect files in the physical hard disk to host operating system?

  Third, if something wrong happens during expand the size of the virtual disk of OS guest, I simply delete the folder 'VirtualMachine' in the host operating system and load the original 'VirtualMachine' from the external hard drive in the host operating system. Works correctly as long as one is the Virtual Machine before Stude the virtual disk size?

  Thank you.

  First of all, if something bad happens during the expansion of the size of the virtual disk, the guest operating system and its Applications do not work. Can I just delete the folder 'VirtualMachine' in the host operating system?

  Yes.

  Secondly, the problem of the first question does not affect files in the physical hard disk to host operating system?

  N °

  Third, if something wrong happens during expand the size of the virtual disk of OS guest, I simply delete the folder 'VirtualMachine' in the host operating system and load the original 'VirtualMachine' from the external hard drive in the host operating system. Works correctly as long as one is the Virtual Machine before Stude the virtual disk size?

  Yes.

  That's right, as long as you have not added and other virtual disks of different folders on the host of the virtual machine, you can probably did not.

  After developing the size of the virtual disk, you must also change the size of the partition in the guest operating system.

  André

• VMware Workstation is unable to open one of the virtual disks required by this virtual machine because it is larger than the maximum file size supported by the host file system.

  I'm transitioning from Windows XP (64-bit) on a new computer with Windows 7 installed.  I undertook to VMWare Workstation 6 7.0.1 in the process.  The problem is with a very large RAID 5 volume on the new system.  It's a score of 5.45 TB (TPG and NTFS).

  When I try to start a virtual machine on this volume, I get the message "VMware Workstation cannot open one of the virtual disks required by this virtual machine because it is larger than the maximum size of the files supported by the host file system.".  This is obviously not true.  If I copy the virtual machine to another drive on the system, it starts without a problem.

  Anyone have any ideas on how to work around this problem?

  try to add this line in the vmx file:

  diskLib.sparseMaxFileSizeCheck = "false".

  Maybe it helps.

  VMDK-type do you use?

  monolithicSparse? -C' is the only part type more?

  ___________________________________

  VMX-settings- Workstation FAQ -[MOA-liveCD | http://sanbarrow.com/moa241.html]- VM-infirmary

• Help, please! Snapshot after expand VM, virtual disk parent has changed since the child was created

  OK, here's the situation, (maybe you can find a lot of discussion on this one)

  I have a vmware server running SuSE Linux Enterprise Server 10. I use as its host vmware ESX 3.0.1.

  I realize that I need to extend the drive because he must have more space disk for the production server. Then I resize the disk using vmkfstools x 90 G TARANTELA - TEST.vmdk. The bad news is, I didn't know that the server has a snapshot on VI client. As you know, the error occurred:

  Failed to open the disc

  "/ vmfs/volumes/4652e777-3eb2a038-8fce-0019bb343796/TARANTELLA-TEST-000007.vmdk" or one of the snapshot disks it depends on.

  Reason: The virtual disk parent has been changed since the child was created

  Then I remove the snapshot of the VI client and re-save the virtual machine to inventory, but it may yet open the disc unless I edited the .vmx line file:

  scsi0:0. FileName = 'TARANTELA-TEST - 000007.vmdk '.

  TO

  scsi0:0. FileName = ' TARANTELA - TEST.vmdk.

  It runs as the first time I installed the system, but all the important configuration is in 'TARANTELA-TEST - 000007.vmdk' snapshot.

  Someone there the sollution, how can I do my work of snapshot again?

  Kind regards

  Arfal

  In SL32-AP-TARANTELA - TEST2.vmdk

  change

  CID=dc621992
  

  TO

  CID=ce700012
  

  and

  RW 188743680 VMFS "SL32-AP-TARANTELA-TEST2-flat.vmdk"
  

  TO

  RW 31457280 VMFS "SL32-AP-TARANTELA-TEST2-flat.vmdk"
  

  and

  ddb.geometry.cylinders = "11748"
  

  TO

  ddb.geometry.cylinders = "1958"
  

  in SL32-AP-TARANTELA-TEST2 - 000007.vmdk

  change

  RW 188743680 VMFSSPARSE "SL32-AP-TARANTELA-TEST2-000007-delta.vmdk"
  

  TO

  RW 31457280 VMFSSPARSE "SL32-AP-TARANTELA-TEST2-000007-delta.vmdk"
  

  And then you change the changes you have made to the VMX file.

  Try power o the VM - you will get probably mistakes (inside the virtual machine).

  If this works report back (we are not yet made).

• When running Disk Management, get the error - failed to connect to the virtual disk Service.

  When I run the Snap on the local server disk management, I get an error message in the status bar: unable to connect to the virtual disk Service.

  Thanks, I have tried these things and nothing has solved the problem.  Here's what I did:

  (a) check the VDS service was manual and failures later per second are 'take no action '.
  ANSWER: Yes to manual and following, second has not changed to "restart the service" of "non-action".
   
  (b) sfc/scannow as administrator
  ANSWER: the System File Checker has found no problem (program reported no problem and findstr/c: "[SR]" on CBS.log doesn't have the list of issues)

  (c) restore to a previous system restore point
  ANSWER: I have tried restore points several more early, each of them failed

• Please help: the virtual disk parent has changed...

  After a few days of research about this error, I decided that I had to ask for some evidence of your experts to help me recover from this error.

  Thank you!

  It is a small desktop application:

  -Dell T410 esxi Server 5

  -a virtual machine, Windows Server 2003 with 2 discs, no fixed size

  I was help this office by managing services and updates on this Server 2003.  I ran updates on Friday and restarted.  When he came I open vSphere and found the virtual machine does not.  I tried to start it and got the error.  So, it seems I may have the CID issue that needs to be corrected.

  I don't have a direct access to this server so I'm remoting with RDS on 2003 VM server and vSphere on the esxi.  Did I make the right diagnosis and is it possible for me to make the necessary corrections to distance or I need direct access to the server?  Everything I've read has files of people editing CID numbers and it seems that they directly access the esxi server.

  Shows the data store:

  hard 'server '.

  hard 'server_1.

  'server' - 000001.vmdk

  "server_1" - 000001.vmdk

  'server' - snapshot1.vmsn

  I stuck a few newspapers below...

  DISC: Scsi0:0 [OPEN ' / vmfs/volumes/4f4781a4-15d3bbb8-2681-782bcb6a6964/server/server-000001.vmdk' persistent R]
  2012-08 - 05T 20: 00:06.022Z | VMX | DISKLIB-VMFS: ' / vmfs/volumes/4f4781a4-15d3bbb8-2681-782bcb6a6964/server/server-000001-delta.vmdk ': open with success (10) size = 5620404224, hd = 213826. Type 8
  2012-08 - 05T 20: 00:06.022Z | VMX | DISKLIB-DSCPTR: open [0]: "Server-000001 - delta.vmdk ' (0xa)
  2012-08 - 05T 20: 00:06.022Z | VMX | DISKLIB-LINK: open ' / vmfs/volumes/4f4781a4-15d3bbb8-2681-782bcb6a6964/server/server-000001.vmdk' (0xa): vmfsSparse, 35526656 sectors / 16.9 GB.
  2012-08 - 05T 20: 00:06.035Z | VMX | DISKLIB-VMFS: ' / vmfs/volumes/4f4781a4-15d3bbb8-2681-782bcb6a6964/server/server-flat.vmdk ': open with success (14) size = 18189647872, hd = 181059. Type 3
  2012-08 - 05T 20: 00:06.035Z | VMX | DISKLIB-DSCPTR: open [0]: 'server - flat hard' (0xe)
  2012-08 - 05T 20: 00:06.035Z | VMX | DISKLIB-LINK: open ' / vmfs/volumes/4f4781a4-15d3bbb8-2681-782bcb6a6964/server/server.vmdk' (0xe): vmfs, 35526656 sectors / 16.9 GB.
  2012-08 - 05T 20: 00:06.035Z | VMX | DISKLIB LINK: DiskLinkIsAttachPossible: incompatibility of the content ID (parentCID f72e60c7! = f05537b3) /vmfs/volumes/4f4781a4-15d3bbb8-2681-782bcb6a6964/server/server-000001.vmdk vmfs/volumes/4f4781a4-15d3bbb8-2681-782bcb6a6964/server/server.vmdk.
  2012-08 - 05T 20: 00:06.035Z | VMX | DISKLIB-STRING: ' / vmfs/volumes/4f4781a4-15d3bbb8-2681-782bcb6a6964/server/server.vmdk ': cannot open (the virtual disk parent has changed since the child was created.) The content of the virtual disk ID parent does not match the ID of parent for children's content).
  2012-08 - 05T 20: 00:06.035Z | VMX | DISKLIB-VMFS: ' / vmfs/volumes/4f4781a4-15d3bbb8-2681-782bcb6a6964/server/server-000001-delta.vmdk ': closed.
  2012-08 - 05T 20: 00:06.035Z | VMX | DISKLIB-VMFS: ' / vmfs/volumes/4f4781a4-15d3bbb8-2681-782bcb6a6964/server/server-flat.vmdk ': closed.
  2012-08 - 05T 20: 00:06.035Z | VMX | DISKLIB-LIB: can't open ' / vmfs/volumes/4f4781a4-15d3bbb8-2681-782bcb6a6964/server/server-000001.vmdk' with the virtual disk 0xa flags parent has changed since the child was created. The content of the virtual disk ID parent does not match the ID of parent for children (18) content.
  2012-08 - 05T 20: 00:06.035Z | VMX | DRIVE: Cannot open disk ' / vmfs/volumes/4f4781a4-15d3bbb8-2681-782bcb6a6964/server/server-000001.vmdk ': the virtual disk parent has changed since the child was created. The content of the virtual disk ID parent does not match the ID of parent for children (18) content.
  2012-08 - 05T 20: 00:06.035Z | VMX | Msg_Post: error
  2012-08 - 05T 20: 00:06.035Z | VMX | [msg.disk.noBackEnd] unable to open drive ' / vmfs/volumes/4f4781a4-15d3bbb8-2681-782bcb6a6964/server/server-000001.vmdk' or one of the snapshot disks it depends on.
  2012-08 - 05T 20: 00:06.035Z | VMX | [msg.disk.configureDiskError] reason: the virtual disk parent has changed since the child was created. The content of the virtual disk ID parent does not match the ID of parent matching the child content.
  2012-08 - 05T 20: 00:06.035Z | VMX |

  Thanks again for any direction you can provide!

  / r

  John

  The parentCID of the snapshot must match the CID from its parent, as shown in the log file

  "... The content ID mismatch (parentCID f72e60c7! = f05537b3)... »

  Server.VMDK

  CID = f05537b3
  parentCID = ffffffff

  Server - 000001.vmdk

  CID = a2b9ba8b
  parentCID = f72e60c7---> f05537b3

  Make sure you change the file on the host using the vi editor or - if you want to change the file in Windows - use an editor who is aware of the line breaks Unix (do not use Notepad!)

  Once this is done, I highly recommend that you take another cliché before you on the virtual computer. This prevents existing virtual disk files to be modified, so that you can return to this State where you need. After that everything works as expected, consider deleting all snapshots.

  André

• Reduce the size of the virtual disk RAID 5

  I have Windows Server 2003 is installed on a virtual disk PERC H700 RAID-5. Total size of the disk is 5.5 TB. The problem is that WinServer 2003 cannot use the disk due to the MBR 2 TB limit (and I can't convert to GPT without destroy all partitions, which is what I try to avoid). Since 3.5 TB of drive space is unallocated (and reconciliations), is there a way to reduce the size of the virtual disk to remove this space which can not be used anyway? Then, I could by using the remaining capacity to create a new virtual disk that can be set up as GPT and access the space through it (or two new virtual drives 2 TB and 1.5 TB in size). I know that you can expand a virtual disk, but you can a shrink?

  No, you can develop most of the virtual drives, but you will not be able to reduce them.

  You will have to start on this subject, creating a VD less than 2 TB for boot/OS disk, then the rest can be used in an another VD.

• Reconfigure the virtual disk using OpenManage of RAID 0, RAID-5

  I apologize for the spacing.  I'm having a little wrong with this forum edit my post.

  My small business has had a T610 run for a few years with the following configuration:

  T610 Server

  PERC 6 / i controller

  4 physical disk 1 TB

  Virtual disk 0 size 1 800 GB RAID - 5

  Size of the virtual disk 1 992 GB RAID - 5

  Virtual Disk 1 was running Exchange and everything else on VD 0.

  Last weekend, I had a breakdown of table flat due to the failure of a damaged drive on Windows SBS 2008, who couldn't recover. When I contacted support Pro and got a new drive, I was told not to recreate the same virtual drives and use one.

  The local tech and I have been quite underlined and used the Perc 6 / I BIOS to recreate the exact configuration. Then, we had to use Backup Exec 2010 to restore the data. Somehow, we have selected by mistake instead of RAID 5 RAID-0 on recreation of the two virtual disks.

  So now, I have the following configuration in OpenManage:

  Virtual disk 0 size 1 800 GB RAID - 0

  Size of the virtual disk 1 992 GB RAID - 0

  I called Dell and gave instructions in OpenManage on how to reconfigure a virtual disk by adding a physical drive and conversion to RAID-5. My problem is reconfigure is not an option in the dropdown menu, I am told, because I have two virtual disks that have stripes.

  I have the ability to drive to go to 1 single virtual disk, given only Exchange is on the second and I can move, then unmold Virtual Disk 1. So my plan is:

  Full backup tape.

  Move Exchange off the drive sitting in virtual disk 1 to disk on virtual disk 0.

  Remove the virtual disk 1.

  Add a 5th physical HD.

  I hope at this point OpenManage will then give me the option in the drop-down list to reconfigure Virtual Disk 0.

  The option to Reconfigure in OpenManage will appear after that he sees only 1 virtual disk?

  Hello

  KRoy66

  The option to Reconfigure in OpenManage will appear after that he sees only 1 virtual disk?

  Yes, the ability to reconfigure should be available as soon as you remove the second table off readers. Technicians are you talked with correct you cannot reconfigure a table in slices.

  I know that you went through the entire process of relocation and restoration of backup, but it is preferable that do you it again. Let me explain why your table has been configured in this way, and why you may need to reinstall again.

  There are limits on the partition. To create a partition more of 2 TB, it must be TPG. In order to boot the system from a partition GPT Board must be set to UEFI mode. The problem you will encounter when trying to create a large RAID 5 is that you will not be able to use more than 2 TB of it. You create a new table in slices to use the extra space.

  If the system card is already set to UEFI mode then you should be able to convert the GPT partition and expand to necessary to hold account space. If you have installed the operating system with the system of administration established on the MBR can change in UEFI and conversion of GPT likely to cause BONE to be unstable if you are able to boot on it at all.

  I think you need to save yourself a lot of hassle and do this upgraded correctly. I know it will be a lot more time to restart, but you should set the UEFI boot mode, remove the two RAID 0, create the new large RAID 5, reinstall the OS and then restore the backup.

  Do it right now probably will save you a lot of time.

  Thank you

• Increase the size of the virtual disk.

  I just installed Windows virtual PC on Windows 7 64 bit and I try to install a program of 6 GB.  He said that there is not enough memory.
  The size of the virtual disk in less than 2 GB and I can't find any way to increase this size.  I tried to create a second virtual disk with more memory, but the same error comes back.  Is there a way I can increase the size of the primary virtual disk?

  Post here http://social.answers.microsoft.com/Forums/en-US/w7install/threads or here http://social.answers.microsoft.com/Forums/en-US/w7programs/threads instead.

• Could not load the virtual disk manager

  I am operating Windows 7 SP1. At one point, I lost the ability to use the virtual disk manager. I've scoured the web and many forums to find answers and none worked. I tried to repair windows, run sfc/scannow, etc stopping before you reinstall windows, which some people have suggested that I have many software loaded and am not sure that this will not happen again once I loaded the software again.

  It is a "backdoor" way to force launch disk management? My need is to change disks on some of the hardware devices, such as DVD players and card readers.

  Would appreciate any advice or suggestions... Thanks in advance.

  Hello

  Thanks for the reply.

  Glad to know that you were able to solve the problem. Your efforts to solve this problem is appreciated. Feel free to post your request here on the Forums of Windows, we would be happy to help you.

  Thank you.