Unable to get the pages to be opened when using facebook in particular when you try to use applications or games

Similar Questions

• Someone at - he managed to get the "page not available" message when you try to download apps?

  I recently joined the Adobe Creative cloud, but when I try to download one of the applications I get a blank page with the message "page not available", I tried both THE 11 and 14 of Chrome, both with the same results. I've also temporarily disabled firewall/scanner virus and anti spam, but without result. I use the optimized UK Server?

  I think it's due to the interruption of the Adobe server / comms reset

  Any ideas?

  David UK

  I have not seen other reports of this problem.

  I suspect that you have a local network problem.

• I get the following error code 80070bc9 when you try to do window upsdates

  I get the following error code 80070BC9 when you try to do a Windows Update. All of my updates have failed in the last three months and most have failed in the last six months. I found this problem when you try to install Itunes and received the error HRESLUT:0x8007054F. After researching this error, I was sharp may receive updates. Help, please.

  Hello Kristen,

  Follow the steps mentioned below:

  Step 1:

  Temporarily disable or uninstall the security software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Step 2:

  Reset components Windows Update the link below:

  How to reset the Windows Update components
  http://support.Microsoft.com/kb/971058

  Note: Click on run in the file download dialog box and follow the steps described in the fix it Wizard.

  Hope this helps

• Anyone know why I get the code 2 error message when you try to update CC2015 on my Macbook Pro?

  Anyone know why I get the code 2 error message when you try to update CC2015 on my Macbook Pro?

  Hello

  Please follow the steps mentioned in the below mentioned document.

  Error code 2 has no Creative Cloud Desktop app update]

  Thank you

• When you access the virtual machine, getting the error "encountered an error when you try to use one of its virtual hard disks". Help?

  I received the "low disk space error" on a hard drive of the virtual machine dynamic expanding. I have increased my space of virtual hard disk using "My Computer" > manage > storage > "Disk management" and choose "Attach VHD" then resizing to max available (64 GB), and now I can not start the virtual machine. It gives the error: encountered an error when you try to use one of its virtual hard disks. Help?

  Hi NatalieFoster,

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums to get help:

  Windows 7 Virtual PC and XP Mode TechNet Forums

• I get a page not found error when you try to access the files of creative cloud with a browser?

  The page will load and then get a page not found error. I can still access files using the office program and saying that they have synchronized. I tried to erase the cache, cookies and others, I've used other computers, browsers, and different browsers on different computers, clear the caches and data on establishments. I tried to change my password and log out, then log.

  Nothing works, my guess is that it has a file corrupted in my archives or it's a server problem. (an admin may permanently delete all my files?, nothing to important there)

  Anything to help.

  Thank you

  Marc Kubischta responded to you here http://forums.adobe.com/message/6338690#6338690.

  It service is not down for everyone.

• I get the "Year Error Occurred" message when you try to start the YouTube app on my new Bravia

  Hello

  My KDL50W800C has an internet connection but when I try to start the YouTube app, I get the message 'year Error Occurred. " Not to be confused with a network error has occurred. It says no network.

  Help is greatly appreciated.

  Can't tell from your model number, but if it is an Android TV, try to erase the data on the app:

  Home > settings > Apps > system apps. Search YouTube from the list, select it, select erase data and confirm.

  Restart (just to clear any other issue) - now power press Remote button and try again the YouTube app.

• get the error (0 x 808005) when you try to change the backup settings

  need to change backup settings I get an error (0 x 808005) how can I take care of this problem

  Hello conniealvarez,

  When you change the settings for a return to the top, when you get this message?  Here is a link to change the settings on a return to the top.

  Save:

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-your-mind-at-ease-back-up-your-files-now

  Since suggest that the reverse will run successfully, where you store to the top (DVD, hard drive)?  Were you able to change the date/time of back ups for the last time with this computer?

  Thank you

  James

• Get the F3-F200-002 error when you try to start Windows 7 64-bit edition

  I have a Toshiba Satellite computer laptop C855-S5214...   I had to restart the computer after an AVG update. It closed and restarted and got stuck on the windows icon (icon was always moving / floating, but it wouldn't keep loading)...  He did this thing even a week or two ago... We took out the battery and put it again and it booted up fine... this time... nothing...   (don't ask me why we pulled out the battery... we (that is her husband) did and told me eventually--)

  At first he would stop at the windows icon and just stay there forever...  Then, I did F8 and started in safe mode... which worked well...  I tried to do the repair, and it comes to say it could not be repaired and to close... then I tried the last known good configuration startup and that did nothing at all... literally... after a few readings on the internet, I decided to use my 5 recovery disks from Toshiba that I made when I came to the computer and try to reformat save my files... I went into Setup and said to boot from the CD/DVD-ROM, because I could not do that without forcing this way... he got through 3 disks and then the disk 4, I got the F3-F200-002 error and now I can't do ANYTHING without getting this error can not enter setup F2...  I get the error until it's here, so I can't recover even to change it to boot from a hard disk instead of the CD/DVD drive...  I can get to the F8 screen but what I chose, I get the error...  I even tried to put in disk 1, as it is supposed to be the 'solution' to this error, but that does not work either...

  Leslie

  Hello

  It is an error code very vague on what is best to fix it.

  And the closet I can find is 0002, no 002

  Solutions to be a module of bad memory, bad sectors on the hard drive, defective recovery disks or a faulty hard disk can designate.

  I suggest you read the information contained in these links:

  https://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=65437

  http://forums.techarena.in/operating-systems/1413251.htm

  http://forums.techarena.in/operating-systems/1381256.htm

  To reinstall from the Toshiba recovery partition, makes you the disks, you press the 0 (zero) to start, then follow the instructions for installation back to factory settings.

  See you soon.

• Get the error (0 x 8078119) when you try to create a system image in Windows 7

  Original title: shadow copy volume
  Hello

  I currently have problems with creating a system image, because it comes back with the error (0 x 8078119) now I know it's, it's to do with the lack of disk space of 100 MB (startup disk or something like that) but with mine I have 62% of free space that is 63 MB available space for me (Please note the 100 MB drive for me is 102 mb)
  so I was wondering if anyone can help, because I had a virus before and ended up losing everything, that I don't really want to breed

  Hi Jugganourt,

  Please see the troubleshooting following thanks Divya R:

  Step 1: Check if the shadow copy Volume service is running.

  1. Click Start and type services.msc in the search box

  2. double-click on the Volume Shadow Copy Service.

  If you receive a Configuration Manager message, click OK.

  3. in the Startup Type list, clickAutomatic, and then click OK.

  4 services nearby.

  5 restart the computer.

  Step 2: Open Event Viewer to check the exact error message:

  Event Viewer is a tool that displays detailed information about the events important (for example, programs that don't start as expected or updates are downloaded automatically) on your computer. The event viewer can be useful when troubleshooting problems and errors with Windows and other programs.

  For more information, see:

  What are the information contained in the logs of the event (Event Viewer)?

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  Check out this link to open the event viewer:

  Open event viewer

  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer

  Open event viewer and navigate to the following location: applications and services Logs\Microsoft\Windows\WindowsBackup\ActionCenter.

  Step 3: You can also generate a log file by following the instructions below and send us the details.

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.

  Back up the registry
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  1. Click Start-> Run-> type regedit.exe.

  2. navigate to HKEY_LOCAL_MACHINE NT\CurrentVersion\Asr, create a new key called LogFileSetting.

  3. under LogFileSetting, create a new DWORD value called EnableLogging.
  Right click on this value, click on edit and then type 00000001 (hexadecimal)
  or 1 (decimal).

  4. under LogFileSetting, create a new string value called LogPathName.
  Right click on this value, click on edit and then enter C:\asr.log.

  5. then, to reproduce the error. You should have a file called asr.log in c:\

  6 copy the content and after us.

  Thank you!

• Get the "layer break" error message when you try to preview a DVD single sided, or build a disk folder or ISO image

  Hello!  Hoping someone may be able to help with a strange problem.  I have not found anything in the forums or on the web that match my symptoms.

  I use Encore CS6 (v6.0.1.013) on a MacBook to the retina year last to create successfully a number of single-sided DVD with menus, chapters and all that.  I usually make a copy of a previous project to DVD, then replace the video media with the new files and transcodes them, move and rename chapter markers and rework the menus in Photoshop.  I will then build the ISO images to DVD and Blu - Ray (both single-sided) and use them to burn multiple copies of each DVD for customers.

  This week, all by developing one of these projects, trying to create an ISO from DVD image that looked like it would take on a 4.7 GB DVD, I received the message "layer break" ("the chosen layer break does not double layer requirements.  To resolve this problem, set a new layer break manually or choose to automatically set the layer break. ") because (I guess) the material was too long for the 4.7 GB DVD (generation screen now shows approximately 5 GB of material are in the project).  This is the first time I've seen this message - usually just tells me that the material is too big for the DVD.

  I re-transcoded the material down to well under 4.7 GB (about 3.9 GB), returned and replaced the files transcoded, and now the generation of DVD screen shows that there are approximately 700 MB of free space on a 4.7 GB DVD.  But I have not yet able to build any version of the DVD (image, folder, drive), without the message 'layer break '.  I also now get this message of breaking down even trying any menu, killing my ability to get a preview of the DVD menus in Encore to "Preview from Here".

  Just to see what would happen, I chose a 8.4 GB double layer DVD and selected 'manual' instead of 'auto' for the selection of layer break, but never had the Selection dialog box of a break layer, just the error message "layer break".

  Usually, I build images DVD and Blu - Ray with the same material in the same project.  I use different transcoding settings for each, and I was able to build an ISO from Blu - Ray without this "layer break" error on the Blu - Ray version (which is about 24.5 GB when built).  And as I mentioned earlier, this is the first project where I saw this message of layer break.

  Any suggestions would be greatly appreciated!  I would rather not to recreate the project from scratch, but I'm worried that I might have to.

  Thank you

  Jon

  Thanks for the quick response!  My problem is that I don't want to make a record double layer - it's a single layer 4.7 GB max project (currently at about 3.5 GB, after removing the extras timeline and asset to see what it might do).  And even when creating a file, I get the error message "layer break", so I couldn't use ImgBurn if I wanted to.

  Thanks for the links - I had seen a lot of them before, but missed a comment from someone, which means that once a layer break set in yet, it cannot be changed.  It makes me wonder if, once again goes in the way of thinking that a rupture of the layer is required, there is no way to disable this behavior.  Has anyone seen this behavior?

  I think my only option at this point is to rebuild the project from scratch, following Neil Wilkes strategy for the command to add assets (I had not paid much attention information previously).  Suggestions are always welcome, however!

• Get the error Code 'WindowsUpdate_8E5E03FB' 'WindowsUpdates_dt000' when you try to download recommended update using the automatic settings 'updates '.

  I just noticed today, pronouncing the 'permission' to Windows to download and install, it is recommended to update it tries to download the update, hit 11% downloaded and then shows the dialog window "update failed", asking me to "Try Again", etc. etc. I googled the error exactly as stated above, and it takes to me an article 'A' answer the Question which recommends a bunch of steps that I have not the first clue of what they mean, or what they will do. I used the option "Microsoft Fix It" after a search, in an attempt to reset the Windows Update settings, but I don't know if it's working or not, although clearly it did nothing to help in the installation of this download. By examining the log of the updates installed, I am able to receive and install other updates, however, it is with a update I see several attempts in the last days to install, and each of them ended in failure.

  When we look at the site of Question answer, other than to check to ensure the update is, indeed, the Automatic value, that it is in accordance with the instructions given that's where I get lost. The following suggestion is something to do with the "C:\windows\system32\catroot" folder, I've never even heard of, and am more than a little reluctant to go messing around with this stuff. Can any that illuminate what he done, or point me in a direction to a response that is written in 'English' for those of us without much experience of computer programming? Live is support available for all what is the cause? Any suggestions much appreciated!

  See you soon!

  Ken, "Medic95."

  See if KB970430 will install after you uninstall IOBit Security 360 & reboot. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I get the deactivation error 194:3 when you try to disable Photoshop elements of an old PC.

  I have Photoshop elements on an old PC, I want to turn it off to set up on my new PC.

  I get 194:3 error whenever I try to turn it off.

  Contact technical support to reset the activations.

  Mylenium

• ADE 2.0 and 4.0 do not work with Windows 10. The next problem is generated when you try to download a book from the public library.    Error getting License Server Communication problem E_ADEPT_DOCUMENT_OPEN_ERROR.

  The next problem is generated when you try to download a book from the public library.

  Error getting License Server Communication problem E_ADEPT_DOCUMENT_OPEN_ERROR.

  The work around works of Jean.  It would be nice if Adobe provided a real difficulty however.

  I have ADE installed 4.03.  The problem will occur as soon as that ADE is closed and reopened.    It takes so the patch every time allows you to download a book ADE.

  1. for Overdrive - select a book and click Download. -pop - up - select - Save file. - under the open with select - acsm_auto_file - download the file of social mobilization in your download directory.

  2. expand the Explorer open the file - go up to the OS (c)-

  -go to Program files (x 86) - enlarge

  -to enlarge Adobe

  -go to Adobe Digital Editions and the left click.

  -On the right part of the screen right click on Digitaleditions.exe.

  -Pop - up menu - on the left, click PROPERTIES

  -Pop up to select COMPATIBILITY

  -at the top of the menu compatibility, choose the resolution of compatibility issues run

  -Pop up to select the troubleshooting program

  -Pop up choose the program worked in earlier versions of windows, etc.

  -on the left, click NEXT

  -POP up - which version etc? Choose that I don't KNOW

  -on the left, click NEXT

  -POP - up - left click Test Program-

  -AT THE TOOL Avantek of window screen, a FLASHING ICON will appear - left-click on the icon - a pop-up will ask you if you want this program to change etc. On the left, click Yes.

  3. ADE open - make sure ADE is in library view.

  -Left click on FILE and then select Add to LIBRARY from the menu drop down.

  -POP UP - down to the right to choose the type of file of social mobilization

  -left side of the pop up to choose the directory where you downloaded the file of the CMHA.

  -Select the file of the CMHA in the right side of the window and on the left, click OPEN

  -It should work, but you have to go through the whole routine if you close ADE.

  I HOPE ADOBE will solve this problem. With each update of Windows 10 ADE seems crumbles a bit more.

• Hello! I get the message "File not found" when I try to access my photos

  Hello! I get the message "File not found" when I try to access my photos in lightroom, and I can't find my photos! I had cleaned up my Mac and deleted by mistake in a different location and now only a gray peak appears in LR, along cable message, file not found. I had saved the raw disk backup files, but it won't let me import into lightroom. (Alright will appear in the import box, but it won't let me even click on it to add. Help!

  In the grid, right-click on an image of 'missing', select 'go to the folder in the library.

  If the folder view does not resemble what you show Finder, right-click on a folder and select 'Show the parent' '; repeat if necessary.

  This will show you where LR thinks that the file was originally.

  You can try to put the images where they were, or place them go elsewhere and 'move' the file in LR.