Unable to hear the video after it is imported on the use of moviemaker2.6 vista

Similar Questions

• Unable to hear the sond. HP envy, windows beta 8

  Dear, HP support

  In recent weeks, I am facing a problem, I am unable to hear the sound, once I open the laptop, I can hear the sound for a few minutes after there is no sound, I use window (beta hp envy) 8.

  Please suggest, I would be grateful to you, for your generous support.

  Syed Tariq Hussaini.

  Hello

  Try the following.

  Open windows control panel, open Windows Update, select "View update history" in the left pane and then select "Installed updates" link in the next window.

  Locate the KB2962407 update, right click and choose uninstall.  Once completed, restart the laptop and when Windows rebooted, open windows control panel, open Windows Update and select "Check for updates".  You will see the update that you have uninstalled just offered once again - right click and select "Hide update".

  After that you may or may not need to remove and reload the sound driver - if you do, how to use Recovery Manager to reinstall the drivers and software is detailed in the document at the link below.

  Recovery Manager - Windows 8.

  Kind regards

  DP - K

• Unable to hear the audio during playback of videos in youtube, etc.

  The sound worked perfectly until a few days ago. I hear the sounds

  the computer is supposed to make (bumps, etc) if I put an audio CD,.

  This works. I can not all the sounds from the internet, not youtube etc.

  The Control Panel indicates that everything is working, (sigma such high definition audio).

  Original title: the sound work on my computer, he can play external audio CD, but I get no sound on the internet like youtube or videos etc.

  Hello

   
   
  1. what happens when you try to play videos from YouTube?
  
  2. do you receive any error messages?
  
  3. have you checked the question in another browser? You use Internet Explorer as your default browser?
  
  4. are you able to play videos using Internet Explorer?
   
   
  If you are using Internet Explorer, perform the following steps:
   
   
  Method 1:

  
  If you use Internet Explorer, make sure that the settings below are correct.

  (a) Open Internet Explorer.
  
  (b) go to Tools>Internet Options.
  (c) switch to the tab 'Advanced'.
  (d) scroll down to the 'multimedia' heading
  (e) make sure that "play sounds in web pages" is checked. Click on 'ok'.
  Restart Internet Explorer. A test to see if you can hear sounds online.
   
   
  Method 2:
  
  a. open Internet Explorer .
  
  b. click on the volume icon in the status bar (at the lower right corner of the desktop) windows system and then click on the link titled 'Mixer'.
  c. a Panel opens showing the levels of individual volume of applications running that play sounds (you may need to scroll right to see all of them).
  d. ensure that the level of volume belonging to Internet Explorer is not set to mute.
  Please let us know if this solves the problem.
  See also:
  
  Diagnose and automatically repair audio playback problems
  http://support.Microsoft.com/mats/NO_SOUND/
   
   
   
  I hope this helps!

• I am unable to hear my video clips when I add audio clips to my film.

  Ok. I'm trying to set up a video for my family. I have video clips and audio clips that I want to use. I have a problem with the pleading of my video clips when I add an audio clip.

  Ok. I'm trying to set up a video for my family. I have video clips and audio clips that I want to use. I have a problem with the pleading of my video clips when I add an audio clip.

  Using Vista Movie Maker 6 or Windows Live Movie Maker?

  ? You say you want to hear the two audio sources simultaneously?
  Try to adjust the volume of audio files.

  Click with the right button on the audio clip... Choose... Volume.

• The sound is broken or jumpy, unable to hear the sound properly

  Original title: the sound on my computer is broken and "jumpy", why?  Is there a solution?

  Audio out "broken" or "nervous" and I can't seem to fix it.

  Hello

  1. What is the brand and model of your computer?

  2. do you use external speakers to hear the audio?

  3. what application you continue to hear the audio?

  4. have you made changes on the computer before this problem?

  Method 1:

  If you are using external speakers, you can check the physical connections.

  Method 2:

  You can run the fix - it from the following link.

  Automatically diagnose and fix problems of Windows audio

  http://support.Microsoft.com/mats/audiorecording/

  Method 3:

  You can see the following link.

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  See also:

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows?T1=tab02

• Unable to find the option to upgrade Windows Vista to Windows 7.

  Original title: upgrading to windows 7 NO 8

  I am writing on behalf of my grandparents. My Grandpa has thought about his laptop computer to upgrade Vista to Windows 7 but I can't find downloads to upgrade to windows 7, only windows 8, which I am sure that they used to focus on after the reaction they had trying to use my windows phone.

  Can anyone find a link with a price please? :)

  Hi Sue & Johnarbon,

   

  Thanks for posting your question in the Microsoft Community.

  From your problem description, I understand that you are unable to find the option upgrade Windows Vista to Windows7. Please let me know if you do not experience this problem.

  I understand the inconvenience caused to you. I'll help you solve the problem!

  Try the links below and check:

   

  Links to buy the upgrade to Windows 7:

  Windows 7 Home Premium: http://www.microsoftstore.com/store/msstore/PD/Windows-7-Home-Premium/ProductID.235488300/VIP.true

  Windows 7 Professional: http://www.microsoftstore.com/store/msstore/PD/Windows-7-Professional/ProductID.216645600/VIP.true

  Windows 7 Ultimate: http://www.microsoftstore.com/store/msstore/PD/Windows-7-ultimate/ProductID.216647200/VIP.true

  For further assistance regarding the purchase, call: 1-877-696-7786.

  Reference links:

  Step_ By_ step procedure to upgrade Windows Vista to Windows 7:

  http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-Vista-to-Windows-7

  Windows 7 Upgrade Advisor: http://Windows.Microsoft.com/en-us/Windows/downloads/Upgrade-Advisor

  Upgrading to Windows 7: http://Windows.Microsoft.com/en-us/Windows7/products/upgrade

  If the problem persists, post your reply with the results. We are happy to help you further in the advanced troubleshooting steps!

  It will be useful.

• Unable to change the base installation of Windows Vista Edition language family by using the restore Vista DVD

  I have Fujitsu Siemens ESPRIMO Mobile (laptop) with pre installed Windows Vista Home basic. It is in the English language.

  When I want to re-installed Vista using (supplied with Labtop) restore DVD, after the installation, it is in Arabic. I tried to change this language but I can't. Could you please help to solve this problem.

  Thank you

  Hello

  You will need to contact Fujitsu about this.

  You cannot change languages with Vista Ultimate and Enterprise.

  You can have a different result if you try reinstalling using this method.

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• Unable to update the Code of error - Windows Vista Service Pack 1 (KB936330) -: 80070017

  original title: could not update - Windows Vista Service Pack 1 (KB936330)

  Impossible to update - Windows Vista Service Pack 1 (KB936330)

  Installation status: failure.

  Error details: Code 80070017

  Hello

  Please follow the steps mentioned below to help resolve the problem with the installation of the service pack.

  Method 1

  Start your computer in a clean boot

  http://support.Microsoft.com/kb/929135

  Note: Make sure that you follow step 7 of the article mentioned above to set the Normal upward Start computer after troubleshooting is completed.

  Try to install the service pack.

  Method 2

  Run a System File Checker tool

  http://support.Microsoft.com/kb/929833

  Method 3

  Reset the contents of Catroot2 folder / rename the software distribution folder

  Step 1

  Reset the contents of the Catroot2 folder

  a. type the following commands and press ENTER after each command:

  ·         net stop cryptsvc

  ·         MD %systemroot%\system32\catroot2.old

  ·         xcopy %systemroot%\system32\catroot2.old /s %systemroot%\system32\catroot2

  b. remove all content of the catroot2 folder, but do not delete the catroot2 folder.

  c. type the following command and press ENTER:

  net start cryptsvc

  d. close the window command prompt

  Step 2

  Rename the folder C:\Windows\SoftwareDistribution

  a. open a window prompt administration commands.

  b. run the following commands and press ENTER after each command:

  ·         Net stop wuauserv

  ·         CD %SystemRoot%\System32

  ·         Ren C:\Windows\SoftwareDistribution SoftwareDistribution.old

  ·         Net start wuauserv

  Try to install updates again.

  Important When you use this method, the following problems occur:

  ·  Updates that are currently downloaded but which have not yet been installed must be downloaded again by using Windows Update or Microsoft Update.

  ·  When you remove the Software Distribution folder, your download history is deleted.

  ·  If you currently receive updates from Microsoft Update and Windows Update, you will need to reselect this option from the Windows Update Web site.

  Note If the problem is resolved and you can successfully download and install the updates, you can safely remove the SoftwareDistribution.old folder to recover disk space.

  Restart the computer and verify if you are able to install the Service pack.

  Method 3

  You can also run as the automated fix this program to reset the Windows Update components.

  http://support.Microsoft.com/kb/971058

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in Windows

  Method 4

  Alternatively, you can try to install the stand-alone version of the Service pack and check if it installs fine

  https://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=30

  Hope this information helps.

• BlackBerry smartphones unable to hear the appellants after viewing the MMS message...

  OK, so I recently switched to a Blackberry for Windows Mobile devices and I love it!  However, I have this weird problem where after I discover a message MMS...  My speakers no longer works!  I heard that it is common semi (I'm with Verizon Wirelessm btw...)

  Then...  Now the question...  Y at - it a fix for this problem?

  Thank you

  -Corey

  I upgraded to 4.5.00.6 and it's working properly now!

  -Corey

• Unable to play any video after update

  I use an imac 24 "mid-2007. I upgraded 10.11.4 el Capitan and now I'm not able to see all the videos. IMovie comes with a white screen when I try to life capture files. VLC will not play videos; Also I am not able to preview the videos in the finder. Help!

  Please read this message before doing anything.

  This procedure is a test, not a solution. Don't be disappointed when you find that nothing has changed after you complete it.

  Step 1

  The goal of this step is to determine if the problem is localized to your user account.

  Select the feedback connections* and log in as a guest. Do not use the Safari connection only 'user comments' created by 'find my Mac '.

  While signed in as a guest, you will have access to your documents or settings. Applications will behave as if you use them for the first time. Do not be alarmed by this behavior; It's normal. If you need any password or other personal information in order to complete the test, save, print, or write them before you start.

  Test while signed in as a guest. Same problem?

  After testing, log on to the guest account and in your own account, disable it if you wish. The files that you created in the guest account will be automatically deleted when you log out of it.

  * Note: If you have enabled 'find my Mac' or FileVault, then you cannot activate the guest account. The login 'User comments' created by 'Find my Mac' is not the same. Create a new account to test and delete it, including his home folder, after testing.

  Step 2

  The goal of this step is to determine if the problem is caused by changes in the system of third party that load automatically at startup or logon, by a device, by a police conflict or corruption of system files or some system caches.

  Please take this step regardless of the results of step 1.

  Disconnect all devices wired except those required to test and remove all the expansion cards from secondary market, as appropriate. Start in safe mode and log on to the account of the problem.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for additional instructions.

  Safe mode is much slower to boot and run as normal, with limited graphics performance, and some things work at all, including an audio output and a Wi - Fi connection on some models. The next normal boot can also be a bit slow.

  The login screen is displayed even if you normally connect automatically. You need your password to log on. If you have forgotten the password, you will have to reset it before you begin.

  Test in safe mode. Same problem?

  After testing, restart as usual (not in safe mode) and make sure you always have the problem. View the results of steps 1 and 2.

• Unable to hear the correct audio sound during playback of media

  Original title: Volume of the sound of my laptop gets strange

  My laptop sound weird during media playback. It sounds like something, for example to call someone on Skype, that happens so the volume is changed to adapt it, but I'm not turning them on. Almost all the video and audio will be faced with the problem of volume, sometimes it becomes normal after a while sometimes it does ' t. I turned the communications under off sound setting option, but the problem is still there. Please help me solve this problem, thank you!

  Hi Songqi Liu,

  This could be a hardware problem. However, I would check the issue by connecting to an external speaker to your laptop. Check if you are faced with the same question.

  Please an update on the status of the issue to help you further.

• Unable to hear the sound when listening to the pandora

  original title: have pandora playing on ipad on my network, but can't hear it on the other pc

  have pandora on my i - pad that is connected to my network.  I play pandora I have pad but can't hear it on any other computer on my network

  Contact Pandora support.

• Unable to hear the default sounds

  original title: problem with the sounds of windows deafault

  my default windows sounds do not (windows startup, rinsing basket). I think that this happened after changing the theme. Any solution how to fix this problem. I use the default theme of windows 7 now

  Hello

  Thanks for posting the request in Microsoft Community!

  I suggest you to follow these steps and check if that helps:

  a. right click on the Volume icon in the system tray.

  b. click sounds.

  c. on the sounds tab, choose Windows default thereunder.

  d. check if the problem persists.

  If the problem is not resolved, please answer and we will be happy to help you.

  Thank you.

• Unable to update the Service Pack 1 for Vista

  PLEASE, SOMEONE HELP ME

  I'm new to all this. I have a laptop and have somehow an update for service Pack 1? Whenever I'm trying to download it then lift back with a load of error messages that I don't understand.

  I tried to download the pack that took 1 1/2 hours but she still cross properly. It lists a few kb936330 kb943899 kb936782 kb936021 kb947562 there are loads and loads of these kb numbers.

  Help! If anyone can help you'd want to answwer.

  PS: I'm part of the older generation so keep instructions for the jargon that I understand

  Thank you very much

  Hello

  May I ask how you are trying to install the Vista SP1?
  You try to first download it from the Microsoft Web site, and after a full download you are trying to install it?

  I have a Vista on my laptop too and I installed the Vista SP1 through the automatic update of the OS.

  The Vista SP1 update automatically, please go to-> Windows Update control panel.

  Here you must press the button install updates.

  The entire procedure will take some time, but everything should run automatically.

• Unable to show the updates available for Windows Vista

  Hi, people. I have a display problem in the updates that are available for Windows Vista Ultimate Edition. What does "Select the updates to install" window does not display an important 33 and 59 option updates that are available are displayed and I cannot uncheck those I really didn't need. I guess that it happened after I installed the Windows Update Agent 7.4.7600.226 (before I had a update of c. 7.2.6001.788). How can I make function?

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack update Vista Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner