"Receive the error message" Windows cannot find a driver for your network card.
Original title: unable to connect to the internet. Perhaps driver problems?
I installed windows 7 on a blank hard drive.
If you have recently installed Windows 7, you must also install the device drivers for your hardware. Windows has some drivers shipped with the operating system, but away from it all. They are not necessarily the best drivers. For example, you may be using a generic video driver with limited capabilities.
Looks like you need at least the network adapter and video drivers. It is best to get their form your computer factory web site. You need to get the Ethernet disk using another computer to get to the line at the start.
I recommend that you check device manager and see what other devices may need to update.
Tags: Windows
Similar Questions
-
Original title: error message
When you try a yahoo search I get the error message "windows cannot find (web site name) make sure you typed the name correctly.
Hello
· What web browser do you use?
· Would which site you find?
· The issue is that with Yahoo search?
· Exactly how you try to search? Web site or toolbar in Internet explorer?
You try to use the Bing search engine to search for Web pages online. To access Bing search engine type www.bing.com in the address bar. Please provide us with more information about the issue to help you further.
-
HP Pavilion g7-2043sf: Windows could not find a driver for your network card
Model: HP Pavilion g7-2043sf
Product number: B1P51EA #ABF
Today, I did a clean install of Windows 7 on this laptop and I can't connect to internet via wifi. When troubleshooting I get this message:
Windows could not find a driver for your network card
Windows does not detect a network card is installed correctly. If you have a network card, drivers for the card cannot be installed correctly.
Install a driver for your network card
Collection information
Windows Version: 6.1
Architecture: amd64
Time: Thursday, December 24, 2015 12:34:16In Control Panel, I found this information:
Ethernet controller: the drivers for this device are not installed (Code 28)
Hardware ID
PCI\VEN_10EC & DEV_8136 & SUBSYS_1844103C & REV_05
PCI\VEN_10EC & DEV_8136 & SUBSYS_1844103C
PCI\VEN_10EC & DEV_8136 & CC_020000
PCI\VEN_10EC & DEV_8136 & CC_0200
Network controller: the drivers for this device are not installed (Code 28)
Hardware ID
PCI\VEN_1814 & DEV_539A & SUBSYS_1839103C & REV_00
PCI\VEN_1814 & DEV_539A & SUBSYS_1839103C
PCI\VEN_1814 & DEV_539A & CC_028000
PCI\VEN_1814 & DEV_539A & CC_0280I visited this side: http://support.hp.com/us-en/drivers/selfservice/HP-Pavilion-g7-2000-Notebook-PC-series/5226249/model...
I need all drivers of network?
Thank you.
Hello:
You need these drivers...
This package contains the Realtek driver local area network (LAN) that allows the NIC (NIC) Realtek chip in the notebook models that are running an operating system supported.
File name: sp55979.exe
This package contains the installation package driver for Ralink Wireless LAN to laptop models controllers that are running a supported operating system.
File name: sp58586.exe
-
get the error message "windows cannot find msconfig".
Using Vista. Dungeon can not enter start"error message" "windows cannot find msconfig".
Hello
I suggest you run SFC (System File Checker) on your computer.
Scan sfc enforcement procedure:
Click Start, click principally made programs, accessories, right-click on command prompt and select run as administrator.
Click on continue or provide administrator credentials if prompted.
In the command prompt window, type the following text, and then press ENTER:
sfc/scannowSee this article for more information:
http://support.Microsoft.com/kb/929833 -
Windows 7: install a driver for your network card
I have a Dell inspiron N5050 and I reinstalled windows 7 64 bit using an installation disc, now it does not connect to the internet. There is a red x on the network icon and my wifi never displays. When I troubleshoot, it says "install a driver for your network card.
Download and run the Intel driver update utility:
https://Downloadcenter.Intel.com/download/24345/Intel-driver-update-utility
It is one of the very few reliable sources of the pilots.
Otherwise, I assume that you have already tried to use www.support.dell.com
-
Hello!
It's happened since I got a virus a months ago who was preventing the computer to start. She came back from the repair shop and it begins again now. But after a few hours of using Firefox, this message pop up at random:
"Windows cannot find"C:\Windows\Program Mozilla Firefox Firefox\firefox.exe". Make sure you typed the name correctly and then try again. »
Example: http://www.risingroad.com/foxhound/faq/images/Windows%20cannot%20find%20firefox.jpgand Firefox still work after this message appears. I already uninstalled and installed new Firefox completely, and the message still appears upward. What this mean and is it harmful to the computer?
I'm on Windows 8
I had the pop up ads sensation can cause the problem and talked about it to the engineer in computer science from my father. It installs Malewarebytes and there was indeed still a maleware by repair men left. The difference was, Chrome to view the full announcement page while Firefox may have in maintaining security to block this kind of page, and the result was the error message. (I didn't know that because it happened to me on my computers to the precedents and even Firefox used to show me the ad then) Thank you for warning me.
-
See above
To resolve this issue, follow these steps:
- Put the CD ROM Windows XP disc in the CD ROM drive
- Click Start and then click run .
- Type expand X: \i386\rundll32.ex_ c:\windows\system32\rundll32.exe in the Open box, where X is the letter of your CD drive.
- Restart the computer.
MD MOEEN AJAZ KHAN - MCP, N +, A +.
-
I deleted a virus and now I can't access anything whatsoever, except by admin, and is very limited
Hello
Permissions and security issues with Vista/Win7?
Check the following settings.
All the users who are allowed to share need to have an account on all computers that they are allowed to connect to.
Everyone is an account, that means a group of all users who already have an account now as users.
Using the functionality of all saved the need to configure authorization for each of the established users, it does mean not all those who feel that they would like to connect.
Users who do not have an account on the computer are not part of the Everyone group.
If the LAN security is useless and users are not established, then move on the guest account provides the semi-open configuration.
http://Windows.Microsoft.com/en-us/Windows7/turn-the-guest-account-on-or-off
---------------------
Point to a folder that wants to share do right click and choose Properties.
In the properties
Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.
This screen shot is to Win 7, Vista menus are similar.
http://www.ezlan.NET/Win7/permission-security.jpg
The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.
When everything is OK, restart the network (router and computer).
* Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.
-
Windows could not find a driver for my network card
I suddenly can't connect to the internet and instead the following message - "windows cannot find a driver for your network card.
I have a Sony VAIO pcg-71c11m - Windows 7.
Can anyone help please?
My advice to you is to completely uninstall bittorrent & all torrent Downloader. I had this problem once and permantely CRASHED my computer download of torrent files. I don't do this more... There are a lot of bugs & viruses attatched with torrent files. YOUR COMPUTER WILL DIE A SLOW DEATH IF YOU DON'T STOP DOWNLOAD TORRENT FILES! Talking about the experience...
You will need to do a system restore!
Click on the link below...
http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore
YOUR Ray ThompsonVX WELCOME.
Please click on 'Answer' & click the green "Yes" butten on positions that has been useful.
Thank you!
-
Original title: Need help ASAP please
Hi all
I am currently running windows 7 and recently I met a problem that has been giving me the error code: 0 x 80070043 and the Error Message: Windows cannot access the specified device, path or file. You can't have appropriate permission to access the item'. When you try to run a Setup.exe for world of warcraft. But the thing is I am the administrator of the computer and have not had this problem in the neck, it is their all settings or something I can do to fix this? any help would be greatly appreicated thanks and God Bless.
Hello Jay,Thanks for posting your question in the Microsoft Community forum.The description of the problem, I see that you are unable to install World of Warcraft and error message "Windows cannot access the specified device, path or file. You can not have appropriate permission to access the item".»This problem may occur if you do not have permissions for the file or the location of the file, if the file is located on a site that is not accessible at the moment as a network location or an external drive that is not currently connected to the computer or your antivirus software may block the file.Don't worry; Let's try a few steps that will help you solve the problem.Method 1:
I suggest you run the fix it and check if it helps.Solve problems with programs that cannot be installed or uninstalled
http://support.Microsoft.com/mats/program_install_and_uninstallMethod 2:
If the problem persists, I suggest you try the procedure described in the article and see if it helps.Error "Windows cannot access the specified device, path or file" when you try to install, update or launch a program or file
http://support.Microsoft.com/kb/2669244You can check the links for more information:Install programs: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows7/installing-programs-frequently-asked-questionsGet back to us and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence. -
Initial version of updated title: windows
My "Windows update" is not updated. The problem started recently and its shows the error message "Windows update canoe currently check for updates, because the service is not running. You may have to restart your computer "." I tried it with several reboots, but there still is not up to date. Kindly help.
Hello
Have you made changes on the computer before this problem?
Method 1:
Troubleshoot problems with installing updates.
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
Method 2:
Try the procedure described in the following article and check the status of the issue.
http://support.Microsoft.com/kb/822798
Restart the computer and check it please for windows update.
Hope the above information is helpful.
-
Computer (win xp 32-bit) A located 1020 printer with sharing
Computer B (win 7 64bits) successful connect through A computer printer share
Computer C (win 7 64 bit)
Computer D (win 7 64 bit)
D C & computer appeared this message: -.
Windows cannot find a driver for HP LaserJet 1022 on the network. To locate one manually, click on OK.
When I click OK, I get an error message:
Required file: INF for HP LaserJet 1022 printer driver
The file '. INF' (unknown) is needed.
Type the path where the file is located, and then click OK.On the Win 7 computer...
Devices and printers
Add a printer
Add a local printer
Select create a new port:
Select Local Port for the port Type:
Enter the name of the network to the XP computer that is. \\XPcomputername\LJprinterid
Install the LaserJet 1020 driver when prompted -
Original title: can't end file message system 32 drivers prdmgr.exe.
Under windows XP when I boot, I get a message: windows cannot find the file: c:\windows\system32\drivers\prdmgr.exe and I already made a ststem restore and still get this message.
Turn off System Restore. Use ccleaner and then go to tools/startup. Select it and click on delete. Are you sure its not the windows folder drivers? If its in the windows folder, is a worm/trojan. Looks like it belongs to the trojan.agent so sound in the drivers folder
Use ccleaner, and then click run cleaner. First close the browsers
-
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
Ideas:
- You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
Hi Mefrombigd,
1. it happens with all types of CD?
2. did you of recent changes on the computer?
3 when was the last time it was working fine?
4. you receive the error message when you insert the CD into the CD drive?
Method 1
Check if you can access the contents of the CD using Windows Explorer application.
(a) click the start menu, and then double-click computer.
(b) make a right click on the CD drive, click Open.
(c) check if you can access it.
Method 2
It is possible that some third-party programs installed on the computer is causing the problem.
I suggest that you perform a clean boot and check.
To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
See the link below to learn more about how to clean boot.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Reset the computer to start as usual
When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
(a) click Start, type msconfig in the search box and press ENTER.
(b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.
(c) under the general tab, click the Normal startup option, and then click OK.
(d) when you are prompted to restart the computer, click on restart.
I hope this helps!
Halima S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
First post: I have a hp Envy 4-1030us ultrabook comes with windows 7. from 3 months (after about 1 year of use), he started having the BSOD (blue screen of death) to STOP the messages of error 0x0000007e constantly interrupting sessions. factory reset which has worked for 2 months but started to do it again. tried the factory reset again, but now he makes mistakes BSOD after 2-10 minutes of use. I was so fed up that I had a new OEM DVD of windows 8 and try to start it from the external DVD player connected via USB (laptop doesn't have a DVD player in itself). When I get to the custom installation, without partitions or drives are listed and the error message 'we could not find all the readers'. Since it is an ultrabook there is a 32 GB SSD and a 500 GB HARD drive. in windows 7, these discs are seen without problem. What I am doing wrong? Why install it windows 8 can't see the internal drives? Thanks in advance for any help you can give.
Hello
See the links below:
http://www.eightforums.com/tutorials/9573-SATA-driver-load-Windows-8-Setup.html
Maybe you are looking for
-
Equium L40 - Updated Winflash "can not find BIOS Image here"
I downloaded the latest BIOS update for my laptop. When I extracted the folder and ran the Winflash.exe, it brings me to a window asking me to open the so-called "Fill bios image here." in My Documents. When I click on open, then says Can not find th
-
Auto erasing in pro SSD comes from standby/hibernation mod.
Hallo! Help me) I'm on macbook pro 13 "2011 i5. So I bought ssd to upgrade my mac. These are the 128 GB plextor m6pro. I cloned all the disk system ssd. Also I bought optibay, I broke my hard drive cable, so now the whole system works on optibay and
-
How to control PFI SMU 6556 card?
Salvation or,. 1. I have a vector HWS include 50 output signals and 2 cards SMU 6556. How I build a Labview program to configure the ports of SMU cards with this vector? 2 could configure PXI SMU 6556 map as IO port? How could I do? Thank you and bes
-
wheel__ direction of Xbox.
Try buying an official wheel xbox 360 with force feedback, but have discovered that this article has been discontinued. Is it because a new is going to be released? If Yes when? Thank you.
-
Beep codes for Gateway ZX-6980
Hello: My Acer/Gateway ZX-6980 sometimes refuses to start and emits 4 beeps immediately after I push the power button. For troubleshooting, anyone know what that beep code means for this particular motherboard? Thanks in advence Al