Unable to process the order

Similar Questions

• Unable to process the command BCU

  Hello

  I'm having a problem using BCU to configure the bios for a particular model desktop - PC HP Compaq 8000 Elite USDT

  When you try to configure, I get an error message

  Msg of ERROR = "unable to process the command. Password is enabled, but no other file password is provided, but it is not valid / >
  Msg of ERROR = result "BCU return value" = "10" / >

  The password was generated using HPQPswd.exe, and I am able to configure the bios for other computers (USDT Elite 8200, 8300 Elite USDT, Probook 4520) s using the same command.

  The operating system we use is Windows 7 Professional 32-bit.

  Someone at - it suggestions?

  I suspect that the system is old enough that the BIOS does not support Unicode format of the passwords. Run the attached script as "cscript IsPasswordSet.vbs" and it should tell you.

  If this is the case, try using the BCU version 2.60.13 on the web site of Customer Management Solutions. Check the use, the parameters are different.

• "If there was an error in processing the order." Who knows what I can do?

  I can't buy a subscription. Buy Creative Cloud for photographers. After pressing a proof of purchase to a page where it says, "If there was an error in processing the order." Who knows what I can do?

  Contact adobe during the time pst support by clicking here and, when available, click on "still need help," http://helpx.adobe.com/x-productkb/global/service-ccm.html

• Every time I open a new application, "the iTunes Store is unable to process the purchases at the moment" appears

  I restarted the phone two times, which did not solve the problem. Then I disconnected and tried logging, but it still does not, and in fact I can no longer connect to. Whenever I try, "the iTunes Store is unable to process purchases at this time" keeps popping up. What is going on?

  I am also having this problem.

• [CS5] The transaction level undiminished after processing the order

  I'm working on a plugin that will split a document into several other documents, each containing one or more of the original pages. We work in CS2 and toward the top, but something changed in CS5 and now I have a problem I do not know how to handle.

  The plug-in basically follow this procedure for each set of pages:

  1. Save a copy of the original document (IDocumentCommands::SaveACopy)
  2. Open the copy (IDocumentCommands::Open)
  3. Remove unwanted copying (kDeletePageCmdBoss) pages
  4. Save and close the copy (IDocumentCommands::Save/Close)

  All this is done in an ApplyDialogFields controller method dialog box.

  After treatment of the delete command I see the level of transactions copy of database > 0, which causes InDesign enter protection stop once the plug-in tries to save the document.  Wrap the kDeletePageCmdBoss in a command sequence solves the problem of transaction level (but it seems that it should not be necessary?), but ID always stop when the document is closed with the message "CloseDocCmd - document is always referenced! Stop protection will follow. " The same thing will happen if I let the command entirely.

  It seems that there is another transformation happening in an idle task because when I remove the narrow part of the function I see the document to save a little when my function is completed, and after that I can close the hand without problem.

  There seems to be a fairly simple procedure, but there is a subtlety on the processing of the order, I'm missing. Anyone have any ideas?

  Ah, is that I asked this question a long time back and got a response. Wrap the commands in a sequence of self-canceling seems to have solved the problem. I also need to close all presentations of document with IPresentationList::CloseAllPresentations before scheduling a closing order, otherwise, I'd get a 'always referenced document' say.

• Problem restoring previous version of FF bookmarks, "Unable to process the file of backup.", already tried to delete "places.sqlite".

  I reformatted and reinstalled Windows 7 on a computer that has not been used for about a year. Before wiping the HARD drive, I saved Firefox bookmarks in the form of a .json file (I don't know what version of FF was installed on the computer before, but I know it was at least a year).

  After reinstalling Windows and install Firefox 24.0, I tried to restore the bookmarks using the "Bookmarks-> import" and backup-> restore-> Choose File... "option. I get the error says "Failed to process the backup file."

  I tried to search for this problem but I couldn't find anything precise. It sounds ridiculous because I just installed FF, I tried to delete the file "places.sqlite" based on other similar problems, but that did not fix the problem.

  My only thought is that it must be a problem with incompatible versions of FF bookmarks. Is it possible to recover bookmarks in the .json file?

  Oh my god. I removed the comma, who pointed out the error report and file and bookmarks have been restored!

  How this comma go?

  Thank you for linking me to the validation tool. It has been extremely helpful.

• I can't make the payment for creative cloud. Why are you unable to process my order?

  Why am I not able to buy the creative cloud?

  To the link below, click on the still need help? option in the blue box below and choose the option to chat or by phone...
  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Creative cloud support (all creative cloud customer service problems)
  http://helpx.Adobe.com/x-productkb/global/service-CCM.html ( http://adobe.ly/19llvMN )

• Did not get the product for Media Center-no code can not process the order

  I asked the promotional offer for Windows 8 Media center, but never received the code.  He said that it takes 72 hours to receive, but it has been good (probably about 2 weeks).  I checked all my email, including spam, and there is no email with the code.  I tried 3 e-mail addresses and now all I get is "cannot process order.

  Hi Sukeyrh,

  Sorry to hear that you have a problem with that.

  You may reach the Service the customer to know that you run in. You can find the telephone numbers of the Service the customer in your area below:

  United States: 1-800-Microsoft (642-7676)

  Canada: + 1 877 568 2495

  Comprehensive list of phone numbers can be found here.

  Keith

• Unable to process the pdf for ledger with 100's of links

  Runing Mac OS10.68 with CS5 (completely up to date). Work on a catalogue of big 800 + pages - which, through indesign, has all the links added to "see page" etc. etc. and index of links for paragraphs.

  Come to write the enitire in PDF book and on all Mac - 3 years with 6 GB of ram iMac, aged 9 months 3.33Ghx 6 core with 16 GB ram Mac Pro pdf written process ends at page 669.

  Which leaves me with an option - write the book into two parts and then edit links in Acrobat for those links that broke trying to connect for the first section to the second and vice versa - hardly ideal or own.

  Way interesting page 669 pdf without these problems when the book is divided in two.

  My conclusion is that it is a problem of software as new and old and more or less power/RAM seem to make no difference (apart from speed to abandonment on page 669)

  Any thoughts welcome

  You cannot export the entire book to IDML, but you can export the

  document containing p. 668-671. But before that, I would say

  you try omitting this file of the book and see if the overall export works.

  It is there is a single file that causes the problem.

  I don't suppose the page which is de-energized cannot be the problem since

  your statements, no.

• Cannot restore bookmarks. "Unable to process the backup file." I tried all of the solutions that I can find online.

  I am under W7 and 14.01 FF. My FF admin account works fine. My work account has problems. In the past I was able to get the bookmarks to return but not this time.

  The favorites were there yesterday morning and disappeared in the afternoon. Nothing has changed between the AM and PM to my knowledge. I tried every solution that I could find online but still no bookmarks.

  Problems with bookmarks and history does not properly can be caused by a corrupted database places.sqlite file.

  • http://KB.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
  • https://support.Mozilla.org/KB/bookmarks+not+saved#w_fix-the-bookmarks-file

  You can try to check and repair the database of places with this extension:

  • https://addons.Mozilla.org/firefox/addon/places-maintenance/

  Also, make sure that the backup has the correct file extension (.json to restore a JSON backup).

• Unable to process the purchase in the game

  Hi, I just buy a gift card code. I tried to buy options in the game with her and couldn't. He told me to contact support.

  Click here and ask for help from the staff of the iTunes Store.

  (140441)

• Unable to process the image

  Hello

  When I tried to run the attached program, it displays the following error.

  Error 1074396080 has occurred to IMAQ extract single color plan

  Possible reasons:

  IMAQ Vision: Image not a valid Type.

  My input image is also attached.

  Please help me to debug.

  Look, you set your 3 images as type 'U8 gray levels', then you read an image in color (your attached png file) and then try to extract a color pane... I bet that if you put a probe just after the "IMAQ ReadFile" the image will be in graysclae, and if you use a component "extract color" on a grayscale image, it is understandable that you get an error.

  Image 1 should be allocated as a color image; So instead of using twice the "copy image" maybe just linking a graysclae buffer to the dst 'image' entry "excerpt of color" pane will make it easier.

  Look at this, I re-worked your VI a little, I think that it works as expected:

  

  Hope this helps

• Get when the "not enough memory to process the command' install a new version of the Windows Installer.

  Original title: However, when you try to install the new version I get a message "not enough memory to process the order" I have 812 GB of free memory on my drive C. help!

  In response to an error 80070641 during installation of updates, I uninstalled Windows Installer with the intention to download the updated version and install my updates failed.
  However, when you try to install the new version I get a message "not enough memory to process the order" I have 812 GB of free memory on my C drive.
  Help!

  Hi Derek,.

  Please report the problem to Microsoft Community.

  According to the description, it looks like you get the error when installing a new installer as ' not enough memory to process the order'.

  I have a couple of steps that should help you with this problem.

  Method 1:

  Try these steps and check:

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.

  Back up the registry
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  a. Click Start > run > type regedit and press enter
  b. find the following key: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\LanmanServer\Parameters
  c. find IRPStackSize
  (d) If this value is not right click on key settings and click on new > Dword value and type IRPStackSize under the name.
  e. right click on IRPStackSize and click change
  f. Select decimal , enter a value greater than 15(maximum is 50 decimal), then click on OK.
  g. close the registry editor and restart your computer.

  Method 2:

  Try the steps mentioned in this link and check.

  Not enough memory is available to process this command.

  User action:

  Do one of the following, and then retry the command:

  a. reduce the number of running programs.

  b. remove unwanted files from the disk, the pagefile is on and restart the system.

  c. check the disk paging file for an IO error.

  d. install more memory in the computer.

  Visit the site and check:

  http://TechNet.Microsoft.com/en-us/library/cc978735.aspx

  Method 3:

  I suggest you to clear temporary folders and check if it helps, here are the steps:

  a. click Start, type folder in the search box and press enter.

  b. press the CTRL + A, that will select all the content and Remove it.

  Once you disable this, follow these steps:

  a. click Start, type Temp folder in the start search box and press ENTER.

  b. press the CTRL + A, that will select all the content and Remove it.

  I hope this helps. If you have questions more related to Windows, feel free to post here at Microsoft Community.

• When I click on the account it says "iTunes Store is unable to process purchases at this time."

  Whenever I try to update I get the message "the iTunes Store is unable to process purchases at this time. Try again later. The same thing happens when I tried to go on my account. What should I do?

  There is currently a problem with stores, Apple needs to fix something on their end - keep an eye on this page for when it is fixed: https://www.apple.com/support/systemstatus/

• When going through the process of downloading with social monkee and reach the point add it to firefox, I get the following message: "social Monkee cannot be installed because firefox is unable to modify the required." How can this be repaired?

  When going through the process of downloading with social monkee and reach the point add it to firefox, I get the following message: "social Monkee cannot be installed because firefox is unable to modify the required." How can this be repaired?

  Which is usually caused by a lack of unpacking the directive (< em: unzip > true < / em: unzip >) in the file install.rdf to this extension.

  See https://developer.mozilla.org/En/Updating_extensions_for_Firefox_4.0#XPI_unpacking