Unable to restore files in Vista Home Premium

Similar Questions

• Failure to restore file with Vista Home Premium

  I used the Vista "backup and Restore Center" to create the external USB drive onmy backup files. Wsing windows Explorer, I can see the files and extract a single file for the data really exist on disk

  I have re-installed windows Vista Home Premium and service pack 2

  When I select advanced restore, then on "files from a backup made on another computer" the external drive is visible and two backups can be seen

  in the next screen "select the dates to restore from" all entries of show "backup location is not available.

  If I ignore it and continue the error message is 0x8100001A

  I used the sdutil program to recreate mediaid.bin but restore still does not work

  What to do next - any help appreciated

  Teka

  Hello

  This is a forum for microsoft at the link specifically for backup questions below

  http://social.technet.Microsoft.com/forums/en-us/WindowsBackup/threads

• Unable to start boot corrupted files Windows Vista Home premium

  Hello all recently I got my hands on an old Toshiba laptop Satellite I'm supposed to have attachment to a friend, however, she doesn't remember the password for the laptop so I searched for ways to circumvent the password and delete it however, I ran into a major problem, according to the wiki site , how you put in a family of Windows Vista installation disc premium, you select your country and all that say before you install is a repair of your computer, but I can't so I thought well maybe if I hit install that it will recognize that there are already Windows Vista on the computer however to my dismay that it did not so I canceled the installation but now the computer does not even boot into Vista at all he'll just do Startup Repair whenever whenever it starts "Windows loading files" I already tried several things the bootrec command using command prompt without success, I tried to restore the master boot record by using the command-line without success either, here are the details as seen from the Startup Repair tool: signature of the problem GREATER TOMBENT AUTO there is also one that says corrupt boot configuration data and who says fix partition table I look it up online that I mean who is the code which is the ID of locale 1033 I looked up the exact problem this forum and he said if there is the disconnect a USB connected the problem with that is there is no USB device connected. To clarify what I said earlier about wiki, how what I tried to do initially was put in the trunk of installation disk from the CD in the environment of the installation, then click on repair your computer so that I could use CMD to reset the password online, I have seen that you can change the keys to self-retaining pull up of CMD by modifying the ease of access button but I thought that it would be easier because I don't have to understand how to fix the ease of access button after I did. So now I am at a loss as to what I could do next to important things to note that this computer doesn't have system restore points stored on it so it is not an option if you do not understand something please let me know and thank you for your suggestions. PS I will try a disk check, now that I think of it.

  Hello all I was able to restore the computer back in working order without password, I did however have download and burn a copy of Vista Home premium at my discretion. But I use the product key legally reactivate Windows Vista Home premium but I have to say that the search for the driver for this laptop has not been easy, especially the pilot Wi - Fi that I had to go

  burn it to a disk, and then install the software in this way. I really don't know not how I got the display driver correct because I downloaded the driver two booster and then the next minute it was display driver just because I checked on the user manual on Toshiba.com and it was the correct an Intel 3000 graphics thank you all so much for your help and I hope this helps someone else :-)

• Cannot restore backup image Vista Home Premium Vista Ultimate

  So recently my house was broken into and my laptop stolen.  Fortunately, considerate thieves left my backup hard drive external, I used my destination for Vista Ultimate backups.

  Advance of 2 weeks and now I have a new laptop.  It has Vista Home premium installed. It is deplorable that I must pay for 2 because Microsoft OS assumed that I am a software pirate and does not give me an OEM OS disk, but I also use a version with fewer features.

  But I'm better.  Soon I discovered that my non "backups" are not all files that are not some base document/text/music files.  All my encrypted volumes that have my REALLY important files were not considered sufficiently specific to save Vista, probably because their extension wasn't .txt, .doc or .mp3.

  Fine.  In fact, I did disk-image backups.  As recently, you mind, but at least most of my stuff should be there.

  And, I can't restore my own disk-image backups because Vista Home Premium does not support.  Great, not only bought Vista * double *, I'm not allowed to retrieve the files that I recorded with a BONE that I bought and supposed to be always clean, but only in certain intellectual property of Kafka-esque fantasy land.

  I tried the 3rd party virtualization software to try to start the image (.vhd files). No go.  Can someone tell me how to recover my files?  Thanks in advance.

  Hi Ixne,

  We will not be able to recover an ultimate Image on Home Premium. However, if you have a backup of your entire PC, then you can try to do the same thing in Windows Recovery Mode.

  Starting with the DVD of the operating system, once you see the manufacturer of the screen, Tap "F8". Choose the option "full restoration of the PC.

  Hope this helps with your problem.

• Microsoft Agent restored my Windows Vista Home Premium Remote but am now prompted to activate.

  Two weeks ago, I contacted Microsoft take charge of assistance to install the Windows SP2. Over two days, I worked with a Microsoft support officer who finally restored Windows Vista Home Premium Remote because I don't have my Windows backup of disks. Finally, I could finally update my system with all updates and service packs.

  Now, I'm getting a command prompt that I need to activate Windows. I tried the product key and the CD key that he gave me. The product key does not work and when I type the CD key I get an error message that says that licensing does not. Code error 0xC004F063. Nobody knows why, I'm having this problem? Help, please. I'm so tired of having all these problems. The time I spent trying to sort out the mistakes of Windows starts to affect my productivity and business.

  Hello
  You can read the article and see if it helps.
  How to activate Windows Vista
  http://support.Microsoft.com/kb/940315/en-us
  See also:
  Activating Windows: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/activating-Windows-frequently-asked-questions
  You can also see the response from Keith, Microsoft Support, moderator, thereon, dated April 29. 2010.
  http://social.answers.Microsoft.com/forums/en-us/VistaInstall/thread/6efea9fd-70a9-4530-88c8-93fd7b2d5484

• Why keep away my restore points for vista Home premium?

  I read recently on TechRepublic on Vista Restore devours all the disk space if not configured correctly. I used vssadmin list shadowstorage to see my restore points there is not! I did a manual restore yesterday point and repeat the command vssadmin, it appeared and everything looked good.  I went today to see if the restoration has created another point of restoration, as it is supposed to do on a daily basis, made the shadowstorage command, no restore points, including the one I did yesterday!
  I am running Vista Home Premium, SP1 32 Bit on an Acer Aspire 6920 G computer laptop with Intel Core 2 Duo T5550 1.83 GHz, 667 MHz FSB, 2MB L2 Cache, 3 GB of Ram and a 320 GB hard drive with a partition C: and D:, 104 GB left of 140 GB on D: and C:, so disk space is not a problem the latter being of full backups mobile operating system and storage, NVIDIA GEFORCE 9500 M. For security I run McAfee Security Center, as well as Spybot S & D operation resident Teatimer. Not a dual-boot machine. I checked that the C: drive is selected for restore points, and it is. Any help is greatly appreciated.

  Hello

  Absolutely, I think, that's why I mentioned. Tried to get others who suggest Spybot
  for Vista and especially IE8 to tell people to stop the SBSD service and do not use TeaTimer.

  Good idea to stop the SBSD Service - value STOPPED and MANUAL, you can use SpyBot as
  as scan if needed.

  If you uninstall an antivirus/antispyware/security program never always go to their site and get
  the removal tools and/or special instructions - if you just use remove any at all they tend
  Let the remains.
  ---------------------------------------------------

  Here is what I use:

  Avast and Prevx proved extremely reliable and compatible with everything I threw at them.

  Avast Home free - stop any shields is not necessary except away from Standard, Web and network is working.

  Prevx - Home - free

  Windows Firewall

  Windows Defender

  Protected IE - mode

  IE 8 - SmartScreen filter WE (IE 7 phishing filter)

  I also IE always start with asset if filter InPrivate IE 8.
  (Sometimes you have to temporarily turn off with the little icon to the left of the + bottom right of IE)

  Avast - stop home - free - all shields you do no need except leave Standard, Web and network running.
  (Double-click the blue icon - details look OK. - upper left Shields - those that you do not cancel).
  http://www.avast.com/eng/avast_4_home.html
  Prevx - Home - small, fast, exceptional CLOUD free protection, working with other security programs. It comes
  a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
  http://www.prevx.com/

  PCmag - Prevx - Editor's choice
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Also get Malwarebytes - free - use as scanner only. If you ever suspect malware, and that would be unusual with
  Avast and Prevx running except a low occasional (not much), updated cookie and then run it as
  a scanner. I have a lot of scanners and they never find anything of note that I started to use this configuration.

  http://www.Malwarebytes.org/

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Unable to play games on Vista Home premium 64-bit

  I've got civ 4 and warlords installed, when I try to play I get a prompt to insert the cd, which is already in the drive.
  I tried the install bts and I get a message civ is looking for the directx runtime components 9, finally he's going right now.
  The operating system is vista 64 home premium, dxdiag says I'm running directx 10 without any problem.
  I tried to define shortcuts to run as administrator and compatibility mode.
  I also tried running disciples Gold 2, it starts up and allows me to set it up for the game but when I try to run in fact that he is back with a dialog saying it stops and is looking for solutions.

  Hello

  I see that Civilization 4: Warlords is not compatible with Windows Vista 64-bit. You can check the link below and check it out for yourself.
  
  Windows Vista Compatibility Center .
  http://www.Microsoft.com/Windows/compatibility/search.aspx?type=software&s=civilization&OS=64-bit

  However, you can also consult Civilization 4 community as well.
  http://forums.CivFanatics.com/showthread.php?t=133190

  Here are the requirements for the Disciples 2 gold edition game.

  Minimum requirements

  Windows 95, 98, 2000, XP

  Pentium II 233 Mhz

  32 MB of RAM

  200 MB of hard disk space

  DirectX 7.1

  16-bit sound card

  CD-ROM drive quadruple speed or more

  Video card with 8 MB of RAM

  Optimal conditions

  Windows 95, 98, 2000, XP

  Pentium II 300 Mhz

  64 MB OF RAM

  400 MB of hard disk space

  DirectX 7.1

  16-bit sound card

  CD-ROM drive quadruple speed or more

  Graphics card with 16 MB of RAM.

  I suggest you run the game in the environment of Windows XP sp2 to see if that solves the problem. See the link below

  Make older programs run in this version of Windows.
  http://windowshelp.Microsoft.com/Windows/en-us/help/bf416877-c83f-4476-a3da-8ec98dcf5f101033.mspx

  Let us know if this helps

  Kind regards
  Anthony

• incomplete (HP) the default restore factory Windows Vista Home Premium

  After a HP restore to default settings, freecell, solitaire, solitaire spider do not react to clicking the icon for one of them.  The boxes are (and have been) checked, unchecked, recontroler, rebooted, ad infinitum.  It seems as if the files .exe for these games do not recharge.  Now what?  Any suggestions are welcome.

  Hello

  Thanks for posting in the Microsoft Community.

  I understand that you are unable to open the games built into Windows Vista.

  I imagine the inconvenience that you are experiencing. I will definitely help you with this.

  Please follow the methods.

  Method 1:

  Run the tool file system from the link checker.

  http://support.Microsoft.com/kb/929833

  Method 2:

  Follow the steps in the link.

  When you run an .exe on a Windows XP, Windows Vista or Windows 7 computer file, the file can start another program

  http://support.Microsoft.com/kb/950505

• Cannot retrieve files with vista home premium

  I wish everyone help to make this simple, I found no answers on the net - when you want to decompress files/folders, my menu doesn't include files 'extract all' on my vista program.  Why wouldn't be - and it is not logical that I have to ask this when installing... I've got the latest version of vista - thanks!

  I wish everyone help to make this simple, I found no answers on the net - when you want to decompress files/folders, my menu doesn't include files 'extract all' on my vista program.  Why wouldn't be - and it is not logical that I have to ask this when installing... I've got the latest version of vista - thanks!

  What happens if you double click on (2 left clicks) on the file compressed? It opens?

  If it opens and on this new window, there not a button " extract all files " upward to the toolbar?

  t-4-2

• Problems of displacement, deletion, renaming of files in Vista Home premium with Service Pack 2

  Since SP2 was installed I had travel problems, copy, delete and rename files.  When I do all this the appropriate box opens, but it will remain open and the computer will not respond.  The only way to solve the problem is to use the Task Manager to end the task.

  I'm running a processor 2.33 GHZ of intel with 23 GB of ram and a 500 GB with 310 GB of free disc.

  https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until August 30, 2010.

  Microsoft free support for Vista SP2 at the link above.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows Vista Home Premium 64-bit - cannot do group policy as disabled system restore, but have no way to activate Group Policy.

  Hi, I have Windows Home Premium 64-bit. I want to create a restore point, but I get a message saying that the system restore has been disabled by the administrator of the political group contact domain administrator. I am connected with an administrator account. I have read forums that give instructions to access the system restore options: file or tabs just do not appear and there are some comments saying that the option does not exist in my version. So how the hell do I create a system restore point in Vista Home Premium?

  Reference: http://answers.microsoft.com/en-us/windows/forum/windows_vista-system/system-restore-was-turned-off-by-group-policy/bf10cf68-7da3-4222-a7ce-1ae827bf1845

  Quote:

  Using the Group Policy Editor
  If your edition of Windows Vista includes the Group Policy Editor (gpedit.msc) snap-in, follow these steps:

  1. Click Start, type gpedit.msc and press ENTER
  2. go to the following branch: Computer Configuration | Administrative templates | System | System Restore
  3. double click on disable the Configuration and set it to not configured.
  Note: If the above setting is already set to not configured, set it to "Enabled" and click on apply. Return back the setting to not configured, then click on apply, OK.
  4. exit the Group Policy Editor.

  If using the Group Policy Editor do not fix the problem, try the registry fix from the following.

  Note: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows
  http://support.Microsoft.com/kb/322756
  Using the registry editor

  1. Click Start, type regedit.exe and press ENTER
  2. navigate to the following key:
  HKEY_LOCAL_MACHINE-Software-policies-Microsoft-Windows NT------SystemRestore
  3. in the right pane, delete the value named DisableConfig
  4. exit the registry editor.

  Words

  See also:

  http://www.guidingtech.com/870/system-restore-turned-off-group-policy-error-Windows/

• Where can I find the download of Windows Vista Home Premium Service Pack 1?

  I did a full restore in Win Vista Home Premium from recovery disks.  When you set the computer, I enabled Windows Update before remembered me that I had to also download Vista Service Pack 1 and Service Pack 2.  Windows Update had already downloaded and installed 100 updates before I remembered.

  Now, I can't find a download site for Vista Service Pack 1 and 2 on the Windows site.  Every link I click on that is inactive.

  Can someone tell me where to go for Vista SP1 and SP2 downloads now that Vista is no longer supported?

  Any other ideas?

  Should I still SP1 and SP2?  This computer will serve as my husband for basic e-mail, IE8 and preparation of simple Word documents.  He'll have Norton 360 installed.

  Thank you very much in advance for any suggestions or advice.  Rookie mistake - I knew that Vista is no longer supported, but I never imagined that I could not download as basic as the SP1 and SP2 to Windows.  I hope that I simply found the location of the 'magic' yet.

  I did a full restore in Win Vista Home Premium from recovery disks.  When you set the computer, I enabled Windows Update before remembered me that I had to also download Vista Service Pack 1 and Service Pack 2.  Windows Update had already downloaded and installed 100 updates before I remembered.

  Now, I can't find a download site for Vista Service Pack 1 and 2 on the Windows site.  Every link I click on that is inactive.

  Can someone tell me where to go for Vista SP1 and SP2 downloads now that Vista is no longer supported?

  Any other ideas?

  Should I still SP1 and SP2?  This computer will serve as my husband for basic e-mail, IE8 and preparation of simple Word documents.  He'll have Norton 360 installed.

  Thank you very much in advance for any suggestions or advice.  Rookie mistake - I knew that Vista is no longer supported, but I never imagined that I could not download as basic as the SP1 and SP2 to Windows.  I hope that I simply found the location of the 'magic' yet.

  Please, please install all service packs.  Ignore all, messages of "DO NOT click DOWNLOAD if YOU ARE UPDATING a SINGLE computer" read you.  It works very well.

  • 32-bit Windows Vista SP1
  • 32-bit Windows Vista SP2
  • 64-bit Windows Vista SP1
  • 64-bit Windows Vista SP2

  Also - please please install something other than Norton 360 AV.

• Where are the "System Restore" files in Windows Vista Home Premium

  Where are the "System Restore" files in Windows Vista Home Premium.

  I would like to simplify the installation process.

  Is there a program in Windows Vista Home Premium which can create an image disk for future use.

  Is there a good disk image program/software?

  Can I record a restore point on an external drive? That is, only the last 5 days of "restore points" are available in the system restore.

  Hi SoundHealth,

  Follow the steps in the article.

  Restore your computer from a system image backup

  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-your-computer-from-a-system-image-backup

  Back up your programs, files and system settings

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-your-programs-system-settings-and-files

  No, you can't save a restore point on an external drive.

• Update my OS Vista Home Premium to Windows 7 restore my missing file of the Windows Installer Service (and perhaps my RPC end point mapper file)?

  Iolo System Mechanic deep cleaning has totally deleted my Windows Installer Service folder (and perhaps my RPC end point mapper file) on my Vista Home Premium PC. I looked into MSCONFIG and they are gone!  It has been too long to do a system restore or other functions of the round trip. Q: if I buy the Windows 7 upgrade, it also installs?  It will make Windows Installer service (and RPC end point Mapper) reappear?  If not, how to get support from Microsoft?  I already tried all 4 methods in article ID 2642495 re: find the Windows Installer service.  I have now 10 MS Important that cannot install updates because missing the file of the Windows Installer service.  Personal support of Iolo System Mechanic were NO help.  Thanks in advance.

  Hello

  What service pack is isntalled with Windows Vista?

  Method 1:

  Check out the link and follow the steps.

  Windows Installer 4.5 is available

  http://support.Microsoft.com/kb/942288

  Method 2:

  If you plan to buy win7 you can check the following items.

  Run Upgrade Advisor before upgrading Vista to Windows 7. Check out the link.
  Windows 7 Upgrade Advisor
  http://Windows.Microsoft.com/en-us/Windows/downloads/Upgrade-Advisor

  Method 3:
  Check out the link and follow the steps.
  Upgrade Windows Vista to Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-Vista-to-Windows-7
  You can also check:
  Upgrade Windows Vista to Windows 7 (custom installation)
  http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-Vista-to-Windows-7-custom

• error 0 x 80070246 when you try to install Vista Home Premium SP1. "Missing manifesto" and "Payload missing file" CheckSUR.log errors, running System Update Readiness too.

  I get 0 x 80070246 errors when you try to install SP1 for Vista Home Premium.

  After you run the system update readiness tool, I found the following errors in my CheckSUR.log

  =======================================================
  Preparation of control system was updated.
  Binary version 6.0.6002.22202
  Package Version 6.0
  2009-10-09 19:13

  Checking Windows Service Packages

  Checking of manifests package and catalogs

  Checking package Watchlist

  Watchlist checking

  Checking packages

  Control components store
  (f) clear CSI missing 0x00000002 WinSxS\Manifests\x86_microsoft-windows-msxml30.resources_31bf3856ad364e35_6.0.6000.16386_en-us_37881fc949e23021.manifest x86_microsoft-windows - msxml30.resources_31bf3856ad364e35_6.0.6000.16386_en - us_37881fc949e23021
  (f) CSI Payload file missing 0 x 00000000 jscript.dll x86_microsoft-windows-writing of scripts - jscript_31bf3856ad364e35_6.0.6002.22146_none_852abf080d834b3e

  Summary:
  Seconds executed: 1221
  Found 2 errors
  CSI shows lack Total count: 1
  CSI Payload file lack Total count: 1

  Unavailable repair files:
  winsxs\manifests\x86_microsoft-Windows-msxml30.resources_31bf3856ad364e35_6.0.6000.16386_en-us_37881fc949e23021.manifest

  =======================================================

  The newspaper CBS.log itself has several types of mistakes, too.  Here are some samples:

  -Errors 'M²;

  2009-10-09 21:10:27, info CBS SPI: from SPInstall
  2009-10-09 21:10:27, info CBS SPI: could not start the etl newspaper.  Continue without.  HR: 0 x 80070020
  2009-10-09 21:10:27, info CBS SPI: wave 0 detected
  2009-10-09 21:10:27, info CBS SPI: wave 0 installation. Subset of LPs taken in charge.
  2009-10-09 21:10:27, info CBS SPI: spent before due diligence
  2009-10-09 21:10:27, info CBS SPI: wave 0 installation. Subset of LPs taken in charge.
  2009-10-09 21:10:27, info CBS SPI: M² is not included in
  2009-10-09 21:10:27, error CBS could not initialize wrapper M²
  2009-10-09 21:10:27, error CBS could not define M² by default LCID of the system value

  -"Could not find the CixTarget Molok" errors.

  2009-10-09 21:29:25, CBS Plan info: package: Package_6_for_KB954366 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.3, updated: 954366-50_neutral_GDR, current: installed, pending: the default start: installed, planned: installed, targeted: installed, limit: installed, selected: default
  2009-10-09 21:29:25, error could not find the CixTarget for container package_for_kb954366_server ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.3.cat
  2009-10-09 21:29:25, DpxException hr = 0 x code 80070002 error = 0 x 020109
  2009-10-09 21:29:25, error could not find the CixTarget for container package_for_kb954366_sc ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.3.cat
  2009-10-09 21:29:25, DpxException hr = 0 x code 80070002 error = 0 x 020109

  -"ILLEGAL_CHARACTER" and more "Sqm" errors-

  2009-10-09 21:30:04, error CSI 00000022@2009/10/10:01:30:04.150 (F) d:\longhorn\base\lstring\lblob.cpp(2217): native STATUS_ILLEGAL_CHARACTER error of the function RtlTranscodeLBlobs expression: __rv. UcsCharacter! = (0xffffffff)
  [gle = 0 x 80004005]
  2009-10-09 21:30:21, error CSI 00000023 (F) HRESULT_FROM_WIN32 (582) #489176 # to Windows::ServicingAPI:CCSITransactionAnalysis_ICSIInventory:EnumDeploymentReferences(flags_=_00000003,_tlcid_=_@0x655fac0,_pszSubscription_=_(null), pszCodebase = (null))
  [gle = 0 x 80070246]
  2009-10-09 21:30:21, CBS WER info: generate report of failure for the package: VistaSP1-KB936330 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.0.18000, status: 0 x 80070246, source of failure: other CBS, start state: 0, target State: 4

  
  2009-10-09 21:30:26, information CBS Exec: comprehensive treatment.  Session: 30034248:1278646622, package: VistaSP1-KB936330 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.0.18000, hr: 0 x 80070246
  2009-10-09 21:30:26, State of the information system sleep restored CBS block: 0x80000000
  2009-10-09 21:30:26, CBS Session information: 30034248:1278646622 finalized.  Reboot required: no
  2009-10-09 21:31:30, CBS briefing: initialized 30034249:1690541326.
  2009-10-09 21:31:30, error CBS SPI: cannot write SQM data flow for the package status
  2009-10-09 21:31:30, error CBS SPI: cannot write SQM data flow for the package status
  2009-10-09 21:31:30, error CBS SPI: cannot write SQM data flow for the package status
  2009-10-09 21:31:31, error CBS SPI: cannot write SQM data flow for the package status
  2009-10-09 21:31:31, error CBS SPI: cannot write SQM data flow for the package status
  2009-10-09 21:31:31, CBS Session info: 30034249:1690541326 finalized.  Reboot required: no
  2009-10-09 21:31:31, error CBS doesn't have value of M² for the time of the scene
  2009-10-09 21:31:31, error CBS doesn't have the m value for the build number
  2009-10-09 21:31:38, CBS Session info: 30034249:748895326 finalized.  Reboot required: no
  2009-10-09 21:31:41, info CBS SPI: cannot install MS using the user interface.  HR 0 x 80070246
  2009-10-09 21:31:41, info CBS SPI: SPInstall terminating, return code 0 x 246
  2009-10-09 21:31:41, error CBS didn't M² value for parameters
  2009-10-09 21:31:41, error CBS failed to set exit code value M²
  2009-10-09 21:31:41, error CBS didn't M² for the SKU value
  2009-10-09 21:31:41, error CBS doesn't have the m value for the build number

  ------------------------------------------------

  I don't understand exactly how errors in the two newspapers are related, but my opinion is that, if I can solve my CheckSUR.log errors, CBS.log errors will disappear to, and then I might even be able to install SP1.

  Any help that can be provided would be greatly appreciated.

   

  1 person needs an answer

  For what is interesting, what I ended up doing to solve my problems was to re - install Vista with the 'upgrade' option, so I don't lose any of my files or desktop settings...

  After that, I had a few problems with my OS reinstalled with several (80 +) updates, SP1 and SP2 from catching up.  But overall these problems were minor compared to it, that I lived just to fix some missing files.