Problems of displacement, deletion, renaming of files in Vista Home premium with Service Pack 2

Similar Questions

• Problems after doing a clean install of Vista Home Premium and service pack 2

  I see that others have the same problem as me, but there is no way to comment (that I can see) on the thread I've read.  After a lot of problems, I did a clean install of VISTA Home Premium (came with my Dell PC) and when I installed service pk2, all of the same problems that led me to do a clean install appeared.  I can't the computer to recognize and install the keyboard and the mouse of the blue tooth. (Don't tell me to contact the manufacturer, because they came w / the computer and say "Dell" on them!)  He told me that the enumerator does not work.  Then I launched Quicken, and when I tried to save a registry check for print, he gave me the msg "Quicken launcher has stopped working".  He was a key reason I did a clean install.  The only improvement is that I can at least open Quicken, which he would not let me do before.  How to uninstall service pack 2?

  http://support.Microsoft.com/kb/948537

  How to uninstall Windows Vista service packs as a troubleshooting step

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until August 30, 2010.

  Microsoft free support for Vista SP2 at the link above.

  See you soon.

  Mick Murphy - Microsoft partner

• Fromm Vista Home Premium (with many problems) I wish back to XP PRO. Where can I find the drivers? I think that the original XP disk contains the drivers.

  Vista Home Premium (with many problems), I wish to go back to XP PRO. Where can I find the drivers? I do not think that the original XP disc also contains the drivers!

  Some computers come with a disk drivers or Drivers and Utilities .  If yours does not, look for drivers on the web site of the manufacturer of the computer.

• Unable to start boot corrupted files Windows Vista Home premium

  Hello all recently I got my hands on an old Toshiba laptop Satellite I'm supposed to have attachment to a friend, however, she doesn't remember the password for the laptop so I searched for ways to circumvent the password and delete it however, I ran into a major problem, according to the wiki site , how you put in a family of Windows Vista installation disc premium, you select your country and all that say before you install is a repair of your computer, but I can't so I thought well maybe if I hit install that it will recognize that there are already Windows Vista on the computer however to my dismay that it did not so I canceled the installation but now the computer does not even boot into Vista at all he'll just do Startup Repair whenever whenever it starts "Windows loading files" I already tried several things the bootrec command using command prompt without success, I tried to restore the master boot record by using the command-line without success either, here are the details as seen from the Startup Repair tool: signature of the problem GREATER TOMBENT AUTO there is also one that says corrupt boot configuration data and who says fix partition table I look it up online that I mean who is the code which is the ID of locale 1033 I looked up the exact problem this forum and he said if there is the disconnect a USB connected the problem with that is there is no USB device connected. To clarify what I said earlier about wiki, how what I tried to do initially was put in the trunk of installation disk from the CD in the environment of the installation, then click on repair your computer so that I could use CMD to reset the password online, I have seen that you can change the keys to self-retaining pull up of CMD by modifying the ease of access button but I thought that it would be easier because I don't have to understand how to fix the ease of access button after I did. So now I am at a loss as to what I could do next to important things to note that this computer doesn't have system restore points stored on it so it is not an option if you do not understand something please let me know and thank you for your suggestions. PS I will try a disk check, now that I think of it.

  Hello all I was able to restore the computer back in working order without password, I did however have download and burn a copy of Vista Home premium at my discretion. But I use the product key legally reactivate Windows Vista Home premium but I have to say that the search for the driver for this laptop has not been easy, especially the pilot Wi - Fi that I had to go

  burn it to a disk, and then install the software in this way. I really don't know not how I got the display driver correct because I downloaded the driver two booster and then the next minute it was display driver just because I checked on the user manual on Toshiba.com and it was the correct an Intel 3000 graphics thank you all so much for your help and I hope this helps someone else :-)

• Unable to restore files in Vista Home Premium

  Don't know which forum it might be suitable for.  Cannot restore files backed up with the backup and restore on a new install of Vista.

  Unfortunately, I did a system restore which did a factory reset (FAT fingers-involuntary). Was trying to solve a problem of driver.  The reset fixes this issue.

  I did a backup of files using backup and restore to 3 days before, so I have a backup available.  The files are on a hdd external usb. I tried to restore using advanced restore "from another computer.   I made a first return to the top on the reinstalled Vista and now I have 2 backups on the hard drive. When I try to restore old save I get 'incorrect parameter (0 x 80070057)' ' the location is correct and try again.   Its on the same drive as the new backup. The new back-up works fine as I tried restoring file as a test.

  I went to the folder properties to ensure that the system and the users have full control for the hard drive and all files. When I open them back up, files have full control, but the single play button is shaded. Don't know if this is linked from the new folder is similar.

  I took the hard drive to another laptop under Vista (SP1) and have the same problem when you try to restore "from another computer.

  I have looked through the forums and see nothing similar, although I've seen some that are close on the web - with no solutions.

  Any suggestions?

  Thank you
  Nathan

  Running on a HP 6042n/AMD/3 g / 300 G HD with Vista Home Premium SP1

  With a backup only the files you have access to diskmgmt.msc. This allows you to change the drive letter of the drive backup USB than it was when you made the backup.

  Click Start, type:
  diskmgmt.msc
  Rightclick the USB key and change the drive letter.

  Messages rating helps other users

  Mark L. Ferguson MS - MVP

• I have xp home edition with Service Pack 3: can I transfer files on my drive hard usb?

  I used the information in windows help, but nothing happened.

  You should be able to drag and drop files. I have an external hard drive and do it all the time.

• problem installing vista Home premium service pack 2

  I recently had a hardware crash, had to reinstall the operating system, i.e. Windows vista Home premium with service pack 1 (32-bit) who came wth the system. Later, I tried to update the operating system, but the thrown error was 'WindowsUpdate_80080005 '. I tried to download vista sp2 on microsoft site, and when I tried to install it, it threw an error mentioning as casastrophic error E_unexpected(0*8000ffff). How can I update my windows vista Home premium with Service Pack 2?

  I tried the options listed below
  • tried to update via windows update, it threw an error "WindowsUpdate_80080005."
  • tried to install it by downloading the sp2, it threw an error E_unexpected(0*8000ffff)

  Please answer

  BR
  David

  Hi, DavidDarse,

  0 x 80080005 indicates that there is a problem of access denied with the Background Intelligent Transfer Service (BITS) security descriptors.

  1. don't you make changes on the computer before the show?
  2. When you receive this error message?
  3 update you trying to do?

  Method 1: Run that fix the following:

  The problem with Microsoft Windows Update is not working
  http://support.Microsoft.com/mats/windows_update/

  Method 2:
  If the problem persists, then try to set up your computer in a clean boot state and then try to install the update to windows.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After the adventures of shooting set the computer to start as usual by performing step 7 above of the Knowledge Base article.

  Download the file and save it to your desktop

  Close all windows and applications

  Right-click on the file and select run as administrator to run the installation process.

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
  http://support.Microsoft.com/kb/2509997
  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base. How to back up and restore the registry in Windows:
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  WARNING: Microsoft does not recommend interrupting the CHKDSK process. Microsoft does not guarantee the integrity of the disk if the CHKDSK program is interrupted. For security, you can back up your data before using check disk drive.

  Have you tried a system restore before the second error?

  http://support.Microsoft.com/kb/2732500

  FixIt MS: 0x80000FFFF error Code when you download updates on a computer running Windows Vista by using Windows Update or Microsoft Update

  http://support.Microsoft.com/kb/946414

• Failure to restore file with Vista Home Premium

  I used the Vista "backup and Restore Center" to create the external USB drive onmy backup files. Wsing windows Explorer, I can see the files and extract a single file for the data really exist on disk

  I have re-installed windows Vista Home Premium and service pack 2

  When I select advanced restore, then on "files from a backup made on another computer" the external drive is visible and two backups can be seen

  in the next screen "select the dates to restore from" all entries of show "backup location is not available.

  If I ignore it and continue the error message is 0x8100001A

  I used the sdutil program to recreate mediaid.bin but restore still does not work

  What to do next - any help appreciated

  Teka

  Hello

  This is a forum for microsoft at the link specifically for backup questions below

  http://social.technet.Microsoft.com/forums/en-us/WindowsBackup/threads

• Locked PDF files. Vista Home

  I can't open the PDF files. I installed adobe reader 9. I have norton antivirus 360. I can open saved files, but cannot open internet sites. Now I'm unable to download them as well. All ideas

  Hi stevejoneschris

  ·          You are able to download other files?

  ·          This problem occurs with only Adobe files?

  ·          What was the error that you received when you tried to download?

  Try the following steps:

  Step 1: Configure the browser to open PDF files in the browser window

  When you install Acrobat or Adobe Reader on a system that includes a browser, you automatically configure the browser to open PDF files in the browser window. Acrobat and Adobe Reader install the ActiveX plugin files allow you to use Internet Explorer to open PDF files. If an application is installed, but do not open the PDF files in the browser window, work through the following steps to configure the browser:

  1. make sure that the system meets the requirements for the product that you use Acrobat: Acrobat may not work correctly if the system does not meet the following requirements:

  -Intel Pentium processor

  -Microsoft Windows XP Professional or home edition with Service Pack 1 or 2, or Tablet PC Edition, or Windows 2000 with Service Pack 2

  -128 MB of RAM (256 MB recommended)

  -460 (Professional) or 360 MB (Standard) of available disk space; Optional installation files cache (recommended) requires 300 MB of additional free disk space.

  -1024 x 768 (Professional) or 800 x 600 screen resolution (Standard)

  -Drive, if installing from a CD

  -Internet Explorer 5.5 or later version

  2 make sure that the ActiveX folder contains the files required for web browsing: to open PDF files in a browser window, the ActiveX folder should contain the following files: Acropdf.dll; AcroIEHelper.dll; Gbdetect.dll; and Pdfshell.dll. If one of these files is missing, repair Acrobat or Adobe Reader by selecting help > detect and repair, or reinstall the application. You can find the Active X file in Program Files/Adobe/Acrobat 7.0

  3 use a supported browser version: make sure that you use a browser support Acrobat and Adobe Reader, such as Internet Explorer 5.5 or higher.

  4 restart Windows after you install Acrobat or Adobe Reader to update the Windows registry: to make sure that the Windows registry provides the information of your web browser should display PDF files, restart Windows. If the Windows registry is not updated after the installation of Acrobat, the web browser can not find the references it needs to access the PDF files on the web.

  5 remove earlier versions of Acrobat or Adobe Reader: if you have an older version of Acrobat or Adobe Reader is installed on the system, remove it using the Add / Remove programs in Windows.

  6 repair Acrobat: if you use Acrobat, repair or replace the damaged or missing files by using the detect and repair feature or the dialog box add or remove programs.

  To repair Acrobat:

  1. choose Start > Control Panel.

  2. double-click on add or remove programs.

  3. Select Acrobat, then click on modify.

  4. follow the on-screen instructions to repair the Acrobat.

  7 reinstall Acrobat or Adobe Reader.

  Step 2: Configure the browser to open PDF files in Acrobat window

  If you want the browser to open PDFs in a separate Acrobat window, to set the browser to use Acrobat or Adobe Reader as a helper application. Then, when you select a PDF file in Internet Explorer, the browser opens the PDF file in an Acrobat window instead of the browser window.

  To configure the browser to use Acrobat or Adobe Reader to open PDF files:

  1. exit Internet Explorer.

  2. launch Acrobat or Adobe Reader.

  3 Choose Edition > Preferences.

  4. Select Internet in the list on the left.

  5 disable the display option IN the browser, and then click OK.

  6. restart Internet Explorer.

  Note: The next time you select a link to a file PDF, the browser may ask you to open or save the file. If you choose to open the file, the browser opens the file in the support application that you specified. If you choose to save the file, the browser downloads the file to the hard drive.

  Step 3: Download of a PDF file on your hard drive

  You can download a PDF file on the hard drive of a web page link. Download of PDF files does not require the ActiveX plug-in file must be installed. (If you want to open and view the PDF file after you download it, you must have Adobe Reader installed).

  To download a PDF file from a link:

  1. right click on the link to a PDF file, then choose Save target as on the shortcut menu.

  2. in the Save dialog box under, select a location on your hard drive, and then click Save.

  See also: http://kb2.adobe.com/cps/331/331025.html

  You can also post your question in the Discussion of Adobe.

  NOTE: Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  After back and let us know if it helped to solve your problem.

  Thank you and best regards,

  R uma - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problems of 64-bit Vista Home Premium, Ultimate upgrade

  I recently bought a laptop HP Pavilion dv4-1144us with 64-bit Windows Vista Home Premium (with SP1) pre-installed electronics Fry as well as a copy of the upgrade to Windows Vista Ultimate Edition (with SP1) because I need to the ability to connect to a domain when using the laptop at work.  After installing Office 2007 Standard and by ensuring that the new Windows Vista laptop basically work, I tried to run the installation from the Windows Vista Ultimate 64-bit Upgrade disk and found that, after an hour or two of an upgrade treat it to race end in a non-descript "cannot upgrade one or more components.  Error Windows will restart and cancel the upgrade. ", after which he ends by turn to Vista Home Premium.

  After doing a little research online (on TechArena) and I have re-tried the upgrade again after:

  In Control Panel-> programs and features:

  -Deactivation of Microsoft.NET Framework 3.0

  -Disable remote differential Compression

  -Deactivation of the replication DFS Windows Service

  Disable Norton Virus and Internet Security software pre-installed

  Disable the Windows Firewall and defender.

  Uninstalling Quicktime and AIM.

  Disconnect all other devices to a USB mouse.

  However when "Compatibility Check" of the upgrade at the beginning, he warn a problem with a filter 'keyboard '.

  (no further details) which I think can refer to the HP software that implement quick launch the laptop keys.

  So I downloaded and installed the latest version of the HP Quick Launch Button drivers on the HP Support page:

  ' HP Quick Launch buttons Date: 08/2008 Version: 6.40.8.2 H size: 20.97 M

  and I tried again, but still without success.

  Note: I can not run the Windows Vista Upgrade Advisor, as recommended because it does not work on Vista 64 bit.

  However, there are standard HP and Microsoft Vista + Office + MessengerLive software installed only at this stage.

  Are there additional clues on what to try next?  Has anyone experience this problem?

  -Greg

  You can try to uninstall the filter on the keyboard until the upgrade is complete...  In Device Manager, go to 'View' and select 'show hidden devices and then go down to "Non-Plug and Play drivers" and made a right click on the keyboard/HID filter drivers and uninstall (remove also the softare upon request).

• update of Windows vista home premium w/sp2 kb978207 IE8 for vista security update problems

  I finally understand exactly update has been the cause of my problems with my laptop could not complete the startup after installing an update.

  System: vista home premium w/serv pack 2
  Antivirus: Avira
  other notable programs: itunes, roxio creator media, Skype, messenger, yh, IE8, msn messenger

  I tried several times to install IE8 KB978207 update without success. The last time I tried it, he first gave me an error code of 8024200d, then I reinstalled it. I finally understood by installing the updates one at a time which caused my laptop to not be able to run the start afterreboot after you install updates. I end up having to run the diagnostic tool for starting and when it finishes, I check the error log and it tells me that the reason that she didn't was due to a patch, then using the advanced features to restore my system before installing KB978207.

  Does anyone have a solution to get this installed correctly?

  Jon

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• How to delete/rename/move files in CS3 contribute

  Hello
  
  I'm a total Newb in Contribute. And I have a few questions:
  1. how to delete/rename/move files or directories in CS3 contribute
  is 2 - there a solution to edit pages with Iframes?
  
  Thanks a lot for your help
  Victor
  

  To manage files and search the files to change/remove outside the range of navigation and links from your Web site, check out the 'Choose' button on the right side of the address bar. In this way, you can also find loaded files in your I-frames.

  To delete files, you must have the proper rights (Edit, administer Web sites) to be allowed to delete files. The process of deleting is:
  1. open the file ('Choose' button)
  2. go in: file, share, Delete page

• I have problems keeping records and files of the administrator and the user separate in my laptop (HP Pavilion dv6700) under Windows Vista Home Premium.

  I have problems separating records and files of the administrator and the user. My computer is a laptop (HP Pavilion dv6700), used as a home computer only by myself, I like to keep the two distinct roles, but am unable to as Vista seems to be considered as one and the same. This scenario has arisen as follows:

  Initially, when I bought the laptop - approx. 18 months back - Windows Vista Home Premium was preinstalled, with the name 'Administrator' as an administrator. To customize the operating system and to use safely, I installed a user 'Renault', as a Standard account user.

  After awhile, I changed the name of the Director of "Renault", for reasons I have can not remember now. This caused Vista to combine folders and files of the two "users" in one, I found difficult to deal with, that I could not operate my laptop as just a Standard user, but is still considered the "administrator." On the one hand, this greatly increased spam in my email accounts. So I tried to reset the name of the administrator as 'Administrator' itself and keep my user name as "Renault", as originally the case.  But Vista me has failed to create a new user under the name "Administrator". So I created a new user under the name "System administrator", with administrative privileges. This has been accepted by Vista.

  But I forgot to change the user account for 'Renault', on the Standard account, so there was BOTH administrator accounts at the same time on my laptop! I realized that now only. The net result was that all the files that I created under the system administrator user were still being displayed under the user account of Renault. A few days back, I realized this and tried to separate the files correctly, but it has not been possible. No matter what I copied the account of the user in the files under the system administrator account, the files have been copied on account of the user himself.

  I tried to fix this by changing the name of the user account in something very different, AND as a Standard user. but this also does not work, as all folders and files under the administrator account system shows it as being under the user account of "Renault" only!

  Then, I deleted the user 'Renault' from the list of the user, but he was not yet of any help. Whenever I tried to create a new file under the system administrator, Vista responds with the message, "C:\user\Rajaram folder is not present. Will I create a new? ", which defeat the same purpose of my tent to isolate the administrator account and the user account.
  
  SOMEONE HELP ME PLEASE WITH A SOLUTION, - OTHER THAN REFORMATTING MY C:\ DISK AND REINSTALL VISTA AGAIN - TO GET OUT OF THIS MESS, IT SEEMS TO ME YOU HAVE CREATED AND HELP ME TO HAVE AN ADMINISTRATOR ACCOUNT AND OTHER UNIQUE STANDARD USER ACCOUNTS PROPERLY ISOLATED.

  I would be always grateful for a quick and helpful response.
  Thanks in advance.

  -RAJARAM77
   
  Thanks for your reply. It was very helpful / sorry your proposed solution has not solved my problem. Kind regards. -Rajaram77

  Better to delete the user account except the one that was built in the administrator account that you renamed. Before this backup all your data files of these user accounts.
  Then rename the buil into account administrator as 'administrator '. Then you create another administrator account and use it and never the user built in Administrator account and leave it alone.

• can someone help me! I have a P4 with service pack 2 Professional windows installed in it, my problem is that I am unable to copy all files or other animals. a dialog box appears indicating the integrity of violeted files

  Ideas:

  • Programs you arecan someone help me! I have a P4 with service pack 2 Professional windows installed in it, my problem is that I am unable to copy all files or other animals. a dialog box appears indicating the integrity of files violeted the problems with
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  bastyav,
  We use the exact and some error message in more detail on the issue.  This problem occurs with any file on the disk or only some of them?  You are logged as administrator?  Has anything changed recently (hardware or software)?

  The first thing I would say to run a Virus scan and malware.  If you do not have an antivirus program, then you can get one here: http://www.microsoft.com/Security_essentials/

  If there are no problems found then not try the following steps:
  Run the following commands.

  Chkdsk /r

  http://support.Microsoft.com/kb/315265

  sfc/scannow

  http://support.Microsoft.com/kb/310747

  Let us know the results and the information requested.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problems with windows update, run sfc/scannow and boot into safe mode. (Vista Home Premium)

  Hi all

  Please bear with me here that I try to explain all the questions I have with my computer right now. I'll try to explain everything that self-organization as possible, but if you need more information or file papers to provide a solution more precise, do it me know.

  To start, I use a HP Pavilion dv6000 series (dv6748us to be exact) with Windows Vista Home Premium (32 bit) installed. (Service pack 2). About 6 months ago I got this laptop from what I believe was the conflicker virus (kept forwarding pages, arrested updates and antivirus programs, etc.) and I managed to get Windows Update works again. My help and Support did not work well, it only worked in Mode without failure, so I did some research and tried a bunch of suggested corrections (update the registry, etc.) and got it work yet once again. I don't know if one of the tools that I used all by setting the Help & Support could have caused problems that I now (as I literally tried everything under the Sun until I got to work), but my Windows Update does not work properly again.

  A few weeks ago, I installed some updates and restarted the computer, but updates did not finish install on reboot. He said the usual "Configuring Updates, do not turn off your computer", but never showed percentage complete or whatever it is. It restarted, and when I open Windows Update, he said the last time I checked the updates has never been (obviously not true), and when I tried to check the updates, it jumped right to the message telling me I have to restart my computer to complete the installation of updates. She continues to do everytime I open Windows Update. From time to time, I try to restart it, just to see if it will work, and he never does.

  I spent hours trying all the solutions I could find in Google. I tried to run system update readiness tool, which seemed to run correctly (but does not solve the problem). I then tried the difficulty it for Windows Update, and it does not solve the problem. (It might be important for me to mention that I also have problems with the difficulty It Center itself, too. Individual tools like that for Windows Update is running, but the difficulty It Center program keeps giving me the error message that "a problem is preventing the troubleshooting tool to start.") I also tried to rename the pending.xml file, and then later I deleted it, after reading in another forum that you rename the file could cause system instabillity or something like that.

  Unfortunately, I can't use system restore to solve all my problems, because all my previous restore points have disappeared (I don't know if the virus wiped out them, or if the computer removed on its own) but restore points only I checked are those that have been created recently, during the time I had these problems.

  I tried running sfc/scannow nothing helped, as he continues to tell me that there is a pending repair, but repair pending never ends. I tried to use the command of /revertpendingactions of dism.exe/image:C\/cleanup-image in the command prompt of recovery center to stop it pending repairs, and that has not worked because it claims that dism.exe that does not exist / is not a valid command. No matter what I try, I can't have this pending repair or my updates to complete pending.

  I tried to boot mode safe several times as well and he hung up on crcdisk.sys when starting every time.

  Being that I can't use sfc/scannow, System Restore, or get into Safe Mode, I'm really lost as to what I should do next. I'm honestly not sure if the problems are related, but I just thought it would make sense to list them all in one place.

  Please note that I don't want to re - install Windows Vista, or don't I think I need, because the computer works very well for most. (I use it for typing this right now). I had much rather bring all the features on mine, which I believe can be achieved with the help of the right person.

  If someone could provide me with suggestions/solutions, it would be greatly appreciated! Certainly, it would relieve a lot of stress for me!

  DISM is a thing of Windows 7. First test the hardware.

  Standard hardware troubleshooting
   
   
  First to test we can the material. Material defects can appear as many software defects, that's why we need to test the material first...

   

  Follow these steps in order. Defects of memory can cause disk corruption, disk failures can cause corruption of the disk. Damaged disc causes corrupted files (which SFC may be able to fix). If you get a stop error and after return. Do not run chkdsk with faulty memory.

   
  Diagnosis of memory

  If you have not run a diagnosis of memory, please do. Click on Start - Control Panel - choose Classic view in the left pane - choose Administrative Tools - then memory diagnostic tool.

   

  S.M.A.R.T
  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).
   
  Disk in Windows drives monitor for impending failure. The function is called S.M.A.R.T. It detects an imminent failure, 30% of the time. In a type elevated command prompt (it's a single line)
   
  WMIC PATH MSStorageDriver_FailurePredictStatus /namespace:\\root\wmi get active, predictfailure, reason List

   

  If it is on will be true, otherwise on enable in the BIOS of the computer.

   

  Predict the failure must be False if everything is ok.

   

  In Vista and later if SMART failure predicted Windows prompts the user to run the backup.
   
  Run chkdsk

  In computer all your drives right click and choose Properties, then the Tools tab, and then click check now. Check the TWO boxes and then start. Reset. This will take from one day to the next.

   

  SFC

  Check the alteration of the file by clicking on Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

   

  sfc/scannow

   

  Heat

  Heat can lead to problems of this kind, and sudden restarts without crashing. Make sure that your fans are not clogged with dust.

   

  For memory diagnostic results

  Click on Start - Control Panel (and select Classic view in the left pane), select Administrative Tools and then Event Viewer , and then look in the event (Local) - Applications and Services - Microsoft - Windows - MemoryDiagnostic-results Viewer entered.

   

  Look for EventID is 1201 or 1101 and Source is MemoryDiagnostic-results

   

  Double-click the entry for more details on this entry.

  For results of Chkdsk

  Click on Start - Control Panel (and select Classic view in the left pane) choose Administrative Tools and then Event Viewer , and then look at the Application and the System will connect (under Windows logs) for entries.

   

  Look for EventID is 7 and Source disk
  Look for EventID is 11 and the Source disk
  Look for EventID is 50 , and the Source is disk
  Look for EventID is 51 and Source disk
  
  Look for EventID is 52 and Source disk
  Look for EventID 55 and Source is NTFS
  Look for EventID is 130 and Source is NTFS
  Look for EventID is 134 and Source is NTFS
  Look for EventID is 137 and Source is NTFS
  Look for EventID 1001 and Source is Autochk
  Look for EventID 1001 and Source is Winlogon
  Look for EventID 1001 and Source is WinInit
  Look for EventID 1001 and Source is Chkdsk
  Look for EventID is 26212 and Source is Chkdsk
  Look for EventID 26213 and Source is Chkdsk
  Look for EventID 26214 and Source is Chkdsk
  Double-click the entry for more details on this entry.
   
  PS 7 and 55 are auto repair codes where windows repair disk errors silently on the fly. 52 is the SMART warning.
   
  For the results of the SFC
  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).
   

  findstr/c: "[SR] cannot" %windir%\logs\cbs\cbs.log|more "

   

  It will be able to see which files are corrupted.

   

  To see if there

   

  findstr/c: "[SR] repair" %windir%\logs\cbs\cbs.log|more

   

  There are often false positives for small text files that Windows uses like settings.ini and desktop.ini. Ignore these.