Laptop in battery mode - ' could not find a valid process to connect to.

Similar Questions

• First Adobe could not find any valid editing modes error

  Hi, I have installed adobe first 8 and patch update and when Ic lick new project I get the message Adobe premiere error could not find a valid editing mode, reinstall please, and start again.  I reinstalled, installed patch, checked for the vidc.draw in the registry and none of them haven't made.

  Have XP service pack 3, with valid disk space etc...  Any suggestions greatly appreciated.

  I read his could be caused by the codec?

  If it is due to a codec problem, then you can fix by installing the latest version of Quicktime, according to installation instructions.

  If that does not do it, go to C:/PROGRAM FILES/ADOBE/PREMIERE ELEMENTS 8 / SETTINGS/SEQUENCE PRESETS and make sure it's a NTSC and PAL folder and that each contains the preset project files.

  If this isn't the case, you have a problem.

  If these files are there, click on the button new project notes appearing on the lower left corner of the option settings of the project Panel.

• How to access the USB secure key on windows vista, I get the message that application 10004 could not find any JumpDrive Secure device connected to your system

  Original title: how access key USB secure Windows vista

  I have a lexar player sure to jump that I used with an old computer that has Windows XP.  I now have a new computer with Windows Vista and I can't access the secure part of the USB key.  When I try to access the part secure the USB key I have the following message "Application [-10004] could not find any JumpDrive Secure device connected to your system. Please make sure that your JumpDrive Secure device is inserted into a USB port".

  Of course, the USB key is inserted into the USB port.  If anyone can help find me a way to access the part secure the USB key I would appreciate it.  Thank you.

  Hi Jon0909,

  The error that you received can be for several reasons. I suggest you try the following steps:

  Method 1: Run the fixit available in the link below and check if that makes a difference

  Tips for solving problems of USB devices

  Method 2: This normal matter as a result of a conflict between the USB and other USB (Universal Serial Bus) connected to the computer.

  (a) disconnect all the external devices connected to the computer to expect the mouse and keyboard, check if your USB key works.

  (b) If this solves the problem, and then add back both devices until you discover the piece of hardware causing the issue.

  If the problem persists, you can contact the manufacturer of the device for any known issues
  http://www.Lexar.com/support

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer
  ---------------------------------------------------------------------------------------------------------
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Laptop HP 15-af008ax: could not find the drivers appropriate for ACPI\SMB0001\3 & 2411E6FE & 1 and PCI controller of encryption /Decryption

  After installing the drivers from the HP site I can not find drivers for ACPI\SMB0001\3 & 241E6FE & 1. Device Manager displays "UNKNOWN DEVICE" and said that no drivers were found for her. It is with th encryption /Decryption PCI controller.
  Please suggest me what to do. I'm confused ;-(

  Hello:

  You need this driver for the first...

  http://www.Synaptics.com/en/drivers.php

  To the PCI-E/D controller, you must manually install the driver as follows...

  Download and run this file.  Conclusion of any windows error.

  http://h20566.www2.HP.com/hpsc/SWD/public/detail?swItemId=vc_133833_1

  Go to Device Manager and click on the controller E/D PCI needing drivers.

  Click the driver tab.  Click on set to update driver.

  Select her browse my computer for driver software option and navigate to the folder of the driver that was created when you ran the file.

  This file will be located in C:\SWSetup\sp66974.

  Make sure that the include subfolders is selected and the driver should install.

  Then restart.

• HP Photosmart plus series B209: could not find the usb port to connect to my laptop where to find no. on this this small opening.

  Please help, I am trying to set up wireless and can not find the place to put the usb cable to the printer. Thank you!

  Very appreciated, classified into usb!

• HP8760W Elite workstation: BB09 Ultra laptop extended battery HP drain not prime/more when it is connected.

  Hello

  I have a portable BB09 Ultra extended battery HP that Piggy-Back with the laptop to provide some extra work time. I turn it on between laptops.

  It works by releasing all of first/front that the internal battery is used.

  When the internal battery charge first, after that the extra battery pack fees.

  Suddenly, the logic is reversed.

  The battery is fully charged, but the original battery is discharged first.

  0% when the battery inside the notebook dies instantly without the usual warnings (10%, 6% left).

  The extended battery pack provides no power even if it is fully charged.

  It appears to have happened after that a windows update, but are there not always updated. . ?

  If someone have experienced this before? Or would he know how to "reset" the loading sequence?

  Do mind that this can happen. This battery is expensive.

  Thanks for any info.

  KR WE

  Hello @EsbachW ,

  To get your question more exposure I suggest you post in the trade forums since it is a commercial product. You can do to commercial Forums.

  Even if it is a Commercial product, here is a link to to test the battery.

  Plug the power supply directly to a wall outlet works. Do not connect it a power strip, surge arrester, or secondary power source as this could cause and issue.

  Thank you.

• Error: Could not find the validation report with ID: 87

  I wrote a validation rule in FDM as below, attached this rule to the place. Once I have import data, validate, export and click Check, the system throws an error message stating "error: found no validation report with ID: 87. Not sure what needs to be done.
  
  The rule I wrote is 520000 ~ ~ > = 0
  This rule says that if the amount 520000 account is greater than zero, then only load it. otherwise, generate a report.
  
  Any suggestions?

  You must ensure that you have imported the Reports.xml file in the application of FDM. In addition, you want to connect to the application using the established customer and click on the reports tab and expand the English > reports check and do a right-click on the control of report and choose "set as Validation report.

• In opening the virtual machine: "could not find a peer valid to connect to" or "error of Transport (VMDB) - 32" / "-14" ""»

  Hello

  Since yesterday after a reboot of my host (DELL E6410, W7 SP1 64-bit, 8 GB RAM, 2x750GB SATA3 running WorkStation 9.0.2 Update Windows Update), I can't open my existing VM.

  I often get "can not find a valid peer to connect to" and sometime before: "Transport (VMDB) - 32 error: Pipe: reading is not'or'error of Transport (VMDB)"-14: fitting broke"»

  I worked for 2 years on this machine without a hitch, WS7 reclassification in WS9 without any problem.

  FYI: we have changed the domain 3 months ago, but it has never be a problem.

  I have google and search several Forum. So far, I tried to:

  -restart the service vmware-auth as an administrator

  -launch vmware.exe administrator

  stop/start the vmx86 service

  -uninstall / reboot / install Workstation.  3 times. First using uninstall from the Control Panel, then doing a / clean before installation and finally track down any file/reg entry.

  -HE asked if any group policy changes were made recently (like not allowing to run vmware.exe?)

  -Rename vmware.exe (logs I look similar to what is in this post: http://communities.vmware.com/thread/331099?start=0 & tstart = 0 ... but no luck)
  

  -excluded vmware.exe in my AV (Microsoft ForeFront). Unfortunately, in that I'm not allowed disabled...

  -Open the virtual machine using the drive == > does not work either.

  This isn't a file corrupted in a virtual machine (even backup - 7zipped - don't work on my laptop... but the launch on the other).

  Even a newly created WM (boneless), unbootable! :-(

  *, BUT to BE NOTE *: if a virtual machine is created as a shared virtual machine, I can start the application locally remotely! And this same VM, if started (via the.vmx) does not work using Workstation GUI!

  I have attached 2 newspapers. Work a (vmware.log remotely) and the inactive (vmware-vmx - 4072.log thru WS GUI).

  Of after what I saw (and what little I understand), it's as if the CPU is not detected?

  The two newspapers have this line:

  FeatureCompat: EVC masks:

  but the non-working goes - we with

  Module CPUID initialization failed.

  While working it display information on CPU (hostCPUID name / family / type... etc...)

  Any idea is welcome.

  I'll answer me to my problem!

  A lot of research to this knowledge.

  In summary: don't mess with the processor affinity... or keep it in mind!

  Response to distinguish:

  I installed 6 months ago a small utility named prio (search for "PRI prnwatch"), because it can save the priority of a given process. What I did notice, is that it also save the processor affinity ! What happened: I probably changed the affinity once for a VM running to give greater priority to a 7zip archive process to complete more quickly (setting HT no core to 7zip and one - or 2? - HT core to VM). Everything works until the next reboot, where the CPU detection during * start EVERY * VM has been somewhat "damaged" leading to the wrong log message: failed initialization Module CPUID.

  This is the reason of *my* question. Perhaps it might help someone else?

  TIPS:

  For advanced people who do not want to check the processor affinity of each process in the Task Manager, you can try this Windows Powershell command (remember to launch PowerShell as an administrator):

  Get-Process | Format-Table-PriorityClass name, ProcessorAffinity property

  ProcessorAffinity column gives the number of representation of the authorized core, 1-bit by heart.

  15 = 1111 is all possible core (for a logical processor 4). Mine is 1 CPU with 2 core HT <=>4.

  LSB is the core lowest. So if you allow only core0 and core3 (1001) on a process, the number of ProcessorAffinity will be 9...

  Post edited by: cbiero (LSB and MSB...)

• Cannot find a valid peer to connect to

  Setup

  ASUS Z8NA-D6 double socket 1366 edge

  2 x Intel Xeon X 5550 (1366, Quad 2.66 GHz, QuickPath 1 x 6.4 GT/s)

  12 GB (6 x 2 GB) DDR3 PC3-10600 (DDR3-1333), 9 (Kingston ValueRAM KVR1333D3E9SK3 / 6GI)

  Intel X 25-M Postville SSDSA2MH160G2C1, 160 GB SATA - 300

  Western Digital Velociraptor WD3000GLFS, 300 GB, SATA - 300, 16 MB 10000 RPM

  Windows 7 64 bit OEM operating system / Ultimate

  Don't run Vmware 6.5.3.185404 no problem

  Upgrade to VMware-workstation-full - 7.0.0 - 203739

  is msg can not find a valid peers to connect to.

  When I try to start a virtual machine

  reboot without effect

  Uninstall VMware-workstation-full - 7.0.0 - 203739 and install Vmware VM 6.5.3.185404 rerun

  PC installed about 6-8 times the same problem (clean install)

  Installed VMWARE as an administrator without effect

  log.rotatesize = 10000

  log.keepold = 2

  Did not help

  Restart the vmx86 service, using cmd that something like 'net start vmx86' did not help also

  VMWare authorization Service is running fine without change service restart

  a google, but after a month without sutch chance

  For VMware Workstation 7, Intel Server CPU X55xx only works with version 169612 or earlier...

  For the later version number, you must use D0 Stepping of the Intel Server CPU X55xx

  For this version of 169612 I find works very well in most cases.

  and you can use later license to keep turn - until you change your CPU in an official release.

  Hope this helps.

  Happy ThanksGiving Day!

• Could not find ' subject: accidents using the address bar

  My question is with Firefox (35.0.1) constantly crashing, I try to find my submitted incident reports but could not find ' subject: accidents using the address as directed by Mozilla bar. I type "subject: accidents and end up with 'the address is not valid'." My browser crashed between 25 to 30 times in the last 6 days, I presented reports every time and 6 times, I also introduced my address to receive a response, none was forthcoming.
  Home PC is used by a few of us, while the children use their own laptop computer, to save time logging in and out, each of us using another browser. Nobody in our family has problems with IE or Chrome on the PC at home, nor children. The only person to have problems is the poor SAP who drew the short straw - me.

  I can a fair bit of advice? During my research, these constant crashes, I see that many, many others have had the same problem and for quite a few years apparently. Should I just accept that this is part of the use of Firefox and don't forget to take some Valium drops in my tea before logon? or perhaps the healthier choice, find a.n.other browser and move everything out there?
  I wonder Auto Add info and willingness, but understand that I do not use the Firefox browser to do this now because he planted just - seriously.

  Hello type about: crashes without an empty space (on: crashes)

  Thank you

• Thunderbird: In write mode can not find the tool bar (or menu bar), then how should I send my email?

  Thunderbird: In write mode can not find the tool bar (or menu bar), then how should I send my email?

  Well you can press Ctrl + Enter or you could re - turn on the menu and the toolbar https://support.mozilla.org/en-US/kb/display-thunderbird-menus-and-toolbar .

• HP Pavilion g7-2043sf: Windows could not find a driver for your network card

  Model: HP Pavilion g7-2043sf

  Product number: B1P51EA #ABF

  Today, I did a clean install of Windows 7 on this laptop and I can't connect to internet via wifi. When troubleshooting I get this message:

  Windows could not find a driver for your network card
  Windows does not detect a network card is installed correctly. If you have a network card, drivers for the card cannot be installed correctly.
  Install a driver for your network card
   
  Collection information
  Windows Version: 6.1
  Architecture: amd64
  Time: Thursday, December 24, 2015 12:34:16

  In Control Panel, I found this information:

  Ethernet controller: the drivers for this device are not installed (Code 28)
  Hardware ID
  PCI\VEN_10EC & DEV_8136 & SUBSYS_1844103C & REV_05
  PCI\VEN_10EC & DEV_8136 & SUBSYS_1844103C
  PCI\VEN_10EC & DEV_8136 & CC_020000
  PCI\VEN_10EC & DEV_8136 & CC_0200
  
  Network controller: the drivers for this device are not installed (Code 28)
  Hardware ID
  PCI\VEN_1814 & DEV_539A & SUBSYS_1839103C & REV_00
  PCI\VEN_1814 & DEV_539A & SUBSYS_1839103C
  PCI\VEN_1814 & DEV_539A & CC_028000
  PCI\VEN_1814 & DEV_539A & CC_0280

  I visited this side: http://support.hp.com/us-en/drivers/selfservice/HP-Pavilion-g7-2000-Notebook-PC-series/5226249/model...

  I need all drivers of network?

  Thank you.

  Hello:

  You need these drivers...

  This package contains the Realtek driver local area network (LAN) that allows the NIC (NIC) Realtek chip in the notebook models that are running an operating system supported.

  File name: sp55979.exe

  This package contains the installation package driver for Ralink Wireless LAN to laptop models controllers that are running a supported operating system.

  File name: sp58586.exe

• Deployment of sbRIO 9606 chassis LabVIEW (sbRIO-9606): (Hex 0x80DF001E) could not find the plug-in for this deployment item. Make sure that the appropriate software is installed.

  Hi guys,.

  I have problems getting my sbRIO 9606 to deploy.

  Everything's fine until during the deployment process, I get this:

  Deployment of sbRIO 9606 chassis (sbRIO-9606)
  LabVIEW: (Hex 0x80DF001E) could not find the plug-in for this deployment item. Make sure that the appropriate software is installed.

  I tried to reinstall LV (ensuring that FPGA & RT deployment options are checked) and the 9606 software shipped, but it made no difference. I'm still waiting my next serial key by NOR, I have to wait that I recorded it before I can deploy?

  Please find attached the screenshots of my:

  • License Manager OR
  • Overview of the 9606 MAX
  • My project folder
  • Dialog box deployment where the error is displayed.

  -Adam

  Hi Tim,.

  In time real 11 is installed according to the recommended software battery installation program included on the disc NEITHER RIO provided in the starter pack.

  The problem is that the recommended Software NI Scan Engine 3.0 installation program.

  The sbRIO 9606 does not support scanning engine.

  Once the scanning engine support has been uninstalled, I could deploy on my 9606.

• HP Pavilion 15-p031st: I could not find the drivers for Win7

  Hello!

  I could not find the drivers for win7. Except these things, my computer works perfectly with win7.

  BCM43142A0: USB\VID_0A5C & PID_216C & REV_0112 (I think it's a bluetooth driver)

  Unknown device: ACPI\HPQ6007 (I don't know, but it is a driver of Wi - fi button)

  Driver Finder online from HP could not find those too. I don't want to use win8 on my laptop because ı couldn't figured out. So please help as soon as possible...

  Greetings from the Turkey

  Hello:

  You need this driver for the 6007:

  This package provides the HP 3D Driveguard software (HP ProtectSmart hard drive Protection) for the laptop models running a supported operating system. HP 3D Driveguard protects the drive hard by parking the heads if cell phone accidentally falls, or is suddenly struck by another object.

  File name: sp67280.exe

• Windows could not find a certificate to log on netgear47

  I have 2 laptops, Dell is connected and the notbook connects without a problem.  I try to connect this old Vaio pcg - K33 K series and the message above. It comes to XP.

  I hung a cable from the router to the computer and can get online but still can't hang wireless.

  Your information is somewhat distorted, but I guess that what follows:

  'Netgear47' is a model of a Netgear wireless router.

  The error message that you get on the Vaio is similar to "Windows could not find a certificate to connect to the network.

  What version AND service pack of Windows XP is installed on the Vaio (right click my computer and select Properties, if you do not know).

  The most likely problem is that on the Vaio's wireless adapter is misconfigured.  If you use Windows wireless zero configuration (WZC) to configure the card (and not a utility provided by Sony), see the following for directions on how to correct this problem: http://helpdeskgeek.com/how-to/windows-was-unable-to-find-a-certificate-to-log-you-on-to-the-network/

  While you are on the "Wireless network connection properties" screen (in the middle of the 3 images on the site linked), look at the box at the top ('use Windows to configure my wireless network').  If this box is NOT checked, then the fix suggested on the web site may not work and you will need to use the utility Sony to make a similar change. In this case, it may be easier to simply delete the 'profile' of your network in the utility of Sony. When you try to connect after you have deleted the profile, the network must be configured correctly.