Unable to run the game after the installation of Windows 7

Similar Questions

• Why when I run the installer for Windows 8 consumer preview on my computer of Windows XP Home Edition he says: "this platform is not supported"?

  Setup of Windows 8 consumer priview

  Why when I run the installer for Windows 8 consumer preview on my computer of Windows XP Home Edition he says: "this platform is not supported"?

  You can see this message if you downloaded Windows 8 64-bit and XP 32-bit. To start the installation of Windows 8, you will need to restart and boot from the installation of Windows 8 media.

  If you want to keep your current installation of Windows, you can install it on a separate partition and dual boot with the Windows 8 Preview of consumer. To install on a separate partition and dual boot, you must create and boot from the installation media.

  (1) first you will need a free partition on hard drive - if you do not you can shrink a partition and create a new one to install Windows 8 Preview of consumer on.
  To reduce a partition and add a new one that you can use EASEUS Partition Master (free):
  http://www.partition-tool.com/personal.htm
   
   
  (2) to install on a separate disk, you can perform an installation DVD or USB key, then boot from it so you can choose the other partition. To download the ISO file and install media:
  Download Windows 8 consumer Preview ISO:
  http://Windows.Microsoft.com/en-us/Windows-8/ISO
  After you download the ISO file - use the Windows USB/DVD Download tool to install media:
  http://www.microsoftstore.com/store/msstore/HTML/pbPage.Help_Win7_usbdvd_dwnTool
   
   
  (3) installation on a separate partition for dual boot:
  1 make a DVD or USB installation drive - to see the two options above.
  2. start from the DVD or USB install drive and click on install when prompted.
  3. during the installation process, when asked - choose a custom installation.
  4. Select a free partition on the hard disk to install Windows 8 Preview of consumer - this will install Windows 8 on a separate instead of your current Windows partition partition.
  5 continue with the installation.
     
   
   
  First of all please note:
  1 consumer preview Windows 8 is a pre-release and will only work for a limited time - when it expires, you need to remove it.
  2. the overview of consumption is stable and has been tested, but it s not the finished product. Your PC may crash and you may lose important files. You should backup your data and you shouldn't test Windows 8 Preview of consumers on your primary home or business PC.
  3. If you install the preview of consumption on the Windows partition is currently installed, you cannot uninstall the preview of consumption. To return to your previous version of Windows, you will need to reinstall from the recovery or installation media supplied with your PC.
  4. in addition to dual boot, here are a few methods to install Windows 8 Preview of consumers without affecting your current installation of Windows:
  (A) remove your current hard drive and install the Preview of consumers on a spare drive.
  (B) install it on a spare computer.
  (C) install the Preview of consumer in a virtual machine.
   
  For more information - Windows 8 consumer overview FAQ:
  http://Windows.Microsoft.com/en-us/Windows-8/FAQ

• Unable to complete the installation of windows vista, error message "Windows cannot configure one or more system components to install Windows, restart the computer, and restart the installation.

  I'm install windows vista Ultimate edition in my new laptop, but during the installation stage 'completion', the prompt message as "Windows cannot configure one or more system components to install Windows, restart the computer, and restart the installation", but my new laptop was no install any OS before, please help

  tan7655,
  If I read this correctly, you have a portable computer that do not have an operating system on it.  You try to install Vista and get the error.
  You've restarted the Vista installation?  So then you get the same error? If you have tried to install more than once and continue to receive this error, check that the laptop is capable of Vista?  You may need to check with the manufacturer of the laptop to see if it is able to support Vista. Mike Microsoft responds to the technical support engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I'm unable to complete the installation of Windows Vista. At the end of the installation it says "winload.exe is missing or damaged.

  Hi my name is Corey and I have a huge problem. I have windows xp media center edition and I cant' install windows vista. When I turn on my computer with vista DVD inserted, it starts very well. When he arrives at the end of the section "Windows loading files", I get an error saying winload.exe is missing or damaged. OMG! what I'm doing. Help, please!

  PS: I meet well above the requirements for vista.

  original title: PROBLEM of INSTALLATION of VISTA! WINLOAD. EXE, MISSING OR DAMAGED

  Hi xXCAS93Xx,

  Thank you for using Microsoft Vista answers Forums.

  ATTENTION: make sure that u save your file before the following steps.

  Here are a few rare to get this problem is resolved.

  1. put the Windows Vista installation disc in the disc drive, and then start the computer.

  2. press a key when you are prompted.

  3. Select a language, a time, a currency and a keyboard or another input method, and then click Next.

  4. click on repair your computer.

  5. click on the operating system that you want to repair, and then click Next.

  6. in the System Recovery Options dialog box, click Startup Repair.

  7 restart the computer.

  For a complete statement on another option on how to resolve this problem, see this link

  http://support.Microsoft.com/default.aspx/KB/927391

  Please let us know if there is need help or if this solves your problem.

  David O
  Microsoft Answers Support Engineer
  Visit our and tell us what you think.

• Power failure during the installation of Windows 7

  We had a power failure most when setting up my Windows 7 upgrade installation and it will not complete the installation. I downloaded the iso image and an installation DVD, but it does not start the machine. I checked the DVD works on another box of Windows 7, so I'm stuck. I ran the front compatibility checker I tried to upgrade and we found some good things. Any advice in addition to the upgrade of the mother/processor board?

  Remove the hard drive from the computer, connect it to another format only the Windows partition, reinstall it to the original host and try to re-run the installer of Windows...

• It keeps saying "Windows is unable to complete the installation. To install windows on this computer, run the Setup again. "When I tried to reinstall Windows Vista Home Premium

  I removed the original defective hard drive and installed a new one in my Desktop HP Pavilion. Then, insert Vista Home Premium Recovery Disk 1, then 2 disc. After the prompt to restart the computer to complete the installation of Windows, I got this error message:

  "Windows Setup could not configure windows to run on this computer hardware."

  I then click OK and then this message:

  "Windows is unable to complete the installation. To install windows on this computer, run the Setup again. »

  I have computer knowledge very very basic.

  Please help me!

  Thank you

  Hello

  You will need to contact HP for the problems with the help of the HP restore procedure is not a process from Microsoft.

  You can also try the Forums of HP Support for assistance.

  http://h30434.www3.HP.com/

  See you soon.

• After the installation of Windows 'important' 3 updates my screensaver started does not. I get a message that says "ScreenSaver:Photo screensaver.scr - unable to locate component".

  Original title: screen saver does not start because MSVCR100.dll was not found

  After the installation of Windows 'important' 3 updates my screensaver started does not. I get a message that says:

  ScreenSaver: Photo screensaver.scr - unable to locate component.

  This application has failed to start because MSVCR100.dll was not found. Reinstalling the application may fix this problem.

  The screen saver starts after you close the error message. I've never had a problem with my screen saver up to that after I downloaded updates. I don't know how to reinstall the application. I tried Windows Fix - It Solutions, but it does not work. He repeated to me that it was a mistake.

  Help, please. Thank you.

  Hello

  It didn't reinstall the ATL update, it reinstalled 2005 Redistributable. So now, I have 2005 and 2010 x 86 both. And it says that two dates installiation are two days after I installed the 2010. I know 2005 and the update was uninstalled, because I checked after restart the computer and before you install the 2010 version. Very curious.

  But my Screensaver works and access to the camera seemed to work after uninstalling / reinstalling the software. So, good. Thank you.

• I am running vista ultimate SP2 32 bit. I'm unable to complete the installation. Support for koadak says that I need to update my windows install. When I go on the site microst, I don't know that one to download. Help!

  I am running vista ultimate SP2 32 bit.  I'm unable to complete the installation. Support for koadak says that I need to update my windows install.  When I go on the site microst, I don't know that one to download. I am running vista ultimate SP2 32 bit.  I'm unable to complete the installation. Support for kodak says that I need to update my windows install.    Help!

  Update your OS via windows update (start > Control Panel > Security > windows update).

• Try to download a trial of Lightroom, after running the installer of creative cloud, the download gets partially and then disappears.

  Try to download a trial of Lightroom, after running the installer of creative cloud, the download gets partially and then disappears. No explanation.  I already have CS6 installed on my macbook pro running 10.10.3 Yosemite.  I just want to try Lightroom trial.

  You can also download the Lightroom trial down links applications:

  Lightroom 6:

  http://prodesigntools.com/Adobe-Lightroom-6-CC-direct-download-links.html

  Lightroom 5.7.1:

  Adobe - Lightroom: For Macintosh: Adobe Photoshop Lightroom 5.7.1: thank you

• ITunes does not start after the installation of Windows 10

  ITunes does not start after the installation of Windows 10, 1511 version (OS Build 10586.164). ITunes version 12.3.2.35, 6 GB RAM, Intel i3 @3.3 GHz. Itunes and Ipodserver module will run by Manager jobs, but Itunes does not open. iTunes starts in SafeMode as explained in the link below (hold SHIFT and control on your keyboard while you open iTunes).

  Fix unexpectedly closes or problems of launch in iTunes for Windows - Apple Support

  Solution, according to this link, is:

  If the problem does not occur in Mode safe, remove any third party plug-ins iTunes: solving problems with third party plug-ins - Support Apple iTunes but the link has been archived, and I can't find any plug-ins installed iTunes. Any other ideas?

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• install new printer Epson WF-2530, will not install scanner drivers error message ' could not launchrequired program during installation, check the installation disc, and then run the installation again.

  having a problem installing drivers for a new Epson printer scanner all in a WF-2530 on my desktop using windows vista

  error message "could not launch the required program during installation, check the installation disc, then re-run the installer.

  I managed to install the software on my laptop using windows 7.

  spending some time with epson tech dept, after several attempts to solve the problem, they advised that it was a problem with the microsoft software.

  have tried to install it on the internet from the site of epson, but same error

  any help would be greatly appreciated

  < have="" tried="" installing="" over="" internet="" from="" epson="" website="" but="" same="">
  Do you mean that you have downloaded the Epson driver?

  http://www.Epson.com/cgi-bin/store/support/supDetail.jsp?BV_UseBVCookie=Yes&infoType=overview&OID=209709

  Try using the wizard adding printer in the Control Panel, printers. In the wizard, select EPSON under manufacturer. If you don't see your printer in the list, click the Windows Update button. It will take several minutes (about 20) be patient, Windows updates the list. You should see a hard drive activity during the update.

  If that wouldn't work, try to run the System File Checker:

  Use the System File Checker tool to troubleshoot missing or corrupted on Windows Vista or Windows 7 system files
  http://support.Microsoft.com/kb/929833?WA=wsignin1.0

• Cannot run the installation of the software for Photosmart C4580 with 8.1 (64)

  I deleted all the software my computer HP running Windows 8.1 (64-bit) and tried to reinstall the drivers and clean software for both my Photosmart C4580 and for my Scanjet G4010, but when the installation starts after downloading, I get an error for each device dialog box "the system cannot find the file (or reader) specified. The dialog box header is "Users/Philip/AppData/Local/Temp/7zS7D57/installation/hpzpnp"... »

  I can't get past this error message no matter how, I try to download and install. The printer still prints from another laptop in the network it is connected via the network, while the scanner is connected by USB.

  Hello
  Follow the steps below and check if it solves the problem:

  1 open the Mcafee Virus and Spyware Protection software you are interested in, click on calendar and perform analyses. Click analysis in real time, and then click stop. Select until I restart the PC and confirm by clicking the button turn off.
  2. open the dialog box run by clicking on the Windows key and the R key on your keyboard. Type %windir%, and then click OK.
  3. type hpoins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpoins1.old)
  4. type hpwins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpwins1.old)
  5. start the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC /Unregister. in the Run dialog box and click OK.
  6. launch the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC/REGSERVER in the Run dialog box and click OK.
  7. run the installation file and check all difference.

  8. After completing the two printers installattions rename the old file name extension to Dat and restart your PC.

  Kind regards
  Shlomi

• A previous program installation was never completed. You must restart your computer to complete that installation before running the installation of Skype program. Setup will now close

  I get the following information on the screen.

  Skype information

  A previous program installation was never completed. You must restart your computer to complete that installation before running the installation of Skype program. Setup will now close

  Original title: installation of Skype in Windows 7 Professional

  Hello

  Please contact Microsoft Community.

  I understand that you are facing the question on Skype.

  I will definitely help you with this.

  Please provide the information below.

  1. are you an error code?

  2. don't you make changes to the pc before that?

  I suggest you go through the links below:

  Refer to the suggestion given by John Rubdy replied on May 27, 2011:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/unable-to-install-Skype/c00745e0-39b1-49FA-b3b0-c6ed5feab9bf

  Also check out the link below:

  https://support.Skype.com/en/FAQ/FA11033/why-do-i-get-a-Windows-Installer-1618-error-code-when-i-install-Skype

  I hope this helps. Please post back with the State of the question and we will be happy to help you further.

• Windows 7 Home Premium 32-bit OS is unable to complete the installation.

  Windows 7 Home Premium 32-bit OS is unable to complete the installation.

  I have a Dell Inspiron 530 of 2007 which came with Vista and has been updated 2 years later at 7 w. I had to reinstall 7 W... 3 or 4 times since 2010. I guess that my machine can't handle W7 very well.
   
  My current problem started with a BSOD problem. After trying some suggestions Internet on how to solve this BSOD problem that did not work, including repair of Windows, I did a data back up mode without failure and then decide to reinstall Windows 7 from the MS CD. My level of understanding is limited, but as noted, I've done this before with success. What I didn't understand is there seems to be another unsolved problem which does not allow the complete reinstallation of windows.
   
  I did a clean install, then a formatting and in both cases, W7 could not complete the installation. It progresses to the final stage of "complete installation" and then there is a second error message 1 that I can't read... "" a problem has been detected... close... "."  It seems to be a reboot loop.
   
  I have since read that the original BSOD problem and the 'detected problem' could also well be linked to the display driver. And this driver it must be disabled before performing a Windows installation. But I'm not able to access Safe Mode or the control panel to turn it off. If this driver is the problem, is there another way to turn it off?
   
  Or are there any other suggestions on how to complete the installation of the operating system?
   
  Thank you.

  I see that you have posted on the Dell desktop Forums and Robert (rdunnill) gave you a suggestion. He is the expert forum on upgrade/repair of equipment in Dell desktop computers:

  http://en.community.Dell.com/support-forums/desktop/f/3515/t/19632098

• Windows cannot complete the installation "Windows is unable to complete the installation. Please reinstall.

  Needing extra space, I bought a new 500 GB western digital drive. I removed my old drive, installed the new and inserted my windows 7 professional 64 bit cisk. Booted from the cd and installed windows. After crossing it spins the facility and shut down to restart, I got a message tht says "Windows is unable to complete the installation. Please reinstall. I did it twice with the same result.

  What could be wrong. Thank you.

  Hello

  Thank you for writing to Microsoft Communities.

  Until we start troubleshooting on this issue please provides us additional information by answering a few questions, this will help us better solutions to the problems.

  1 are you install windows 7 operating system of the Windows full version Setup disk or recovery disk?

  2. where did you get the installation disc?

  3. you try to reinstall the old disk operating system?

  I suggest you to see the link and see if it helps.

  Windows 7 installation problems: frequently asked questions: http://windows.microsoft.com/en-IN/windows7/Windows-7-installation-problems-frequently-asked-questions

  If so please answer us, we can help you better.

• Unable to remove/change WINDOWS $. ~ BT preventing the installation of Windows 7.

  I was installing Windows 7, and, after several attempts, where he met an error 0 x 080070570, I deleted the three folders in the C: drive starting by ' $', as shown in http://social.answers.microsoft.com/Forums/en-US/w7install/thread/2ebae9fe-e99b-40db-8fde-a14d6eea69f7/?prof=required&wa=wsignin1.0

  This time, he got up to 20% on the stage of 'Collection programs' installation, when the installation stops suddenly. An error message appears, saying that "Module of Installation Windows", or something to that extent, has encountered an error and stopped. I tried to restart the installation, but the installer of Windows 7 said that it could not crush the $WINDOWS. ~ BT file. It was one of the files that I had previously deleted. I tried to remove it, but I denied permission. I'm on an administrator account running Windows Vista SP1. Now, the installation does not start even upward. What can I do?

  Hello Dudboy,

  You will need to take ownership of the file.  This section here give a few steps that you can use to try to take ownership of the file in question to proceed with the upgrade.

  Regards, ~ Alex T. ~.
  ~ MVP Windows desktop experience ~