Unable to save my movie in high resolution using Movie Maker 2.6 (Win 7)

Similar Questions

• Sorry, unable to save your movie. Find missing files or delete the unusable items in your project and then try again. "Error: 0 x 87160129" during video editing in Windows Movie Maker/Windows Live Movie Maker

  I use the same device which was used to make movies in the past with no problems. The error message is sorry, unable to save your movie. Find missing files or delete the unusable items in your project and then try again. Error: 0 x 87160129

  I've never had any problems with this before and made more than 100 movies using WLMM or WMM. Thanks for any help. Would that my camera settings? I use a Lumix.

  I just found out what the problem is freakin ' and the solution. If the inserted videos have different "video codec" then it will not work!

  Before adding videos to Movie Maker, throw in a video converter and convert them all. (Even if the original format is WMV, convert again to WMV) that will ensure the output videos have the same codec!
  This solved the problem for me, hope, it does for you too...

• Unable to save the movie in Live Moviemaker - many error codes

  I have tried repeatedly to record a movie in Live Moviemaker.  Last night I tried to save the movie using "recommend the parameter" error 0 x 87160129 appeared.  The location of the source has not been moved or renamed.  When I checked through the 23 images were affected, with different error codes - 0xC946001E, 0 x 80070057, 80004003 0 x, 0 x 87160129.  When I tried to save this morning using "burn dvd" setting, error 0 x 80070057 appeared, only 12 frames of the film have been affected and only image was the same as the previous night, but with a different error than before.  When I previews savings B4 film everything seems ok, I tried to save at least 5 times, but noted only error codes / affected executives in the last 2 times. But it seems that concerned executives continue to change.  Would appreciate any help.  Thank you very much

  I have tried repeatedly to record a movie in Live Moviemaker.  Last night I tried to save the movie using "recommend the parameter" error 0 x 87160129 appeared.  The location of the source has not been moved or renamed.  When I checked through the 23 images were affected, with different error codes - 0xC946001E, 0 x 80070057, 80004003 0 x, 0 x 87160129.  When I tried to save this morning using "burn dvd" setting, error 0 x 80070057 appeared, only 12 frames of the film have been affected and only image was the same as the previous night, but with a different error than before.  When I previews savings B4 film everything seems ok, I tried to save at least 5 times, but noted only error codes / affected executives in the last 2 times. But it seems that concerned executives continue to change.  Would appreciate any help.  Thank you very much

  =============================================
  I'm guessing that you are running Movie Maker 2.1 on Windows XP?

  There is a good possibility that some of your source files (photos.
  video clips, audio clips) are incompatible or corrupted.

  Even if the project plays well in Movie Maker... which is not guaranteed
  It can encode the project in a video file.

  First... try the following...

  When ready to save it as a movie... go to...
  Tools / Options / Compatibility tab and uncheck the box 'all' filters.

  Following... record in DV - AVI format as follows:

  XP Windows Movie Maker 2.1...
  To save a DV - AVI movie file...
  (and other options)
  Type of... CTRL + P (or go to...) File / save movie file)
  to open the wizard movie recording.
  Choose... My computer.
  Next /.
  Enter a name and a location.
  Next /.
  Show more choices.
  Other parameters.
  Open the window of the droplet and choose... DV - AVI.
  Next /.
  Wait while the movie is saved.
  Finishing...

  If the steps above fail, the next task would be to convert
  video clips on the. Before you import into movie WMV format
  Audio Maker and convert to the. WMA format before
  import into Movie Maker.

  There are many converters available on the net... the
  the following link is an example:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory (freeware)
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster)
  (the file you want to download is: > FFSetup296.zip<>
  (FWIW... installation..., you can uncheck
  ('all' boxes on the last screen)
  (Windows XP / Vista / 7)

  First... after the download and installation of Format
  Factory... you can open the program and
  left click on the toolbar, the "Option" button and
  "Select an output folder to" / apply / OK.
  (this is where you find your files after they)
  are converted)

  Drag and drop your music files on the main screen...

  Select "while"WMA"/ OK...

  Drag and drop your video files on the main screen...

  Select "all to WMV" / OK...

  Now try to recreate the project with the converted files.

  If you decide to try these suggestions... Let us know the result.

• Can't save the movie maker on computer or a cd.

  I made a movie with windows movie maker, I saved the project, and when I go to save it as a movie, it will play only about 3/4 and then freeze.  The music will continue to play, but the picture freezes.  I've done several over the years, but for some reason, I have a problem recording of it, either in my computer or on CD.

  This often happens when you use files that don't work well with MM.

  http://www.myvideoproblems.com/tutorials/MovieMaker/File_type_compatibility.htm

  Use dv.avi or wmv video files and wav music, do not use mp3 or one of the video formats compressed as divx etc.

• Unable to download Windows Movie Maker 2.1

  With Windows XP, Windows Movie Maker 2.1 should be automatically downloaded with SP2.   I have Windows XP and use Movie Maker for a few years. Today, I had to do a destructive system recovery. The recovery got Windows XP (SP 1).  After that recovery was complete I downloaded and installed all Windows updates essential, including the SP 2 and 3, but I still don't have Windows Movie Maker 2.1. I went to Windows updates several times and tried to find Movie Maker without success. The date of search engine update takes me to the elbow that lead me to updates of Windows where I can not find the Movie Maker download.

  It is without a doubt part of SP2 and do it. It is perhaps missing in the menu accessories.

  Search for "C:\Program Movie Maker\moviemk.exe".

  If she's here, create your own shortcut.

  How to reinstall Windows Movie Maker

  NOTE: You must be logged in as an administrator or as a member of the Administrators group to perform this procedure.

  Click Start, click Run, and then type the following command:
  %SystemRoot%\Inf

  NOTE: There no space at all in the preceding command line.

  Click OK to open the INF folder.
  Locate the file moviemk.inf
  Right click on the file and then click on install. This will reinstall the files of research should proceed normally.

  You will be asked to place your windows XP cd rom in the drive.

  Or you may be able to refer to the Service Pack installation files.
  Memory: C:windowsServicePackFiles\i386moviemk.exe

  TaurArian [MVP] 2005-2010 - Update Services

• Unable to connect to Movie Maker or Moviemaker Live

  I have a Sony DCR-HC40 camcorder that my Movie Maker on my Vista PC suddenly refuses to acknowledge. I use the same connection I've used for years, A Firewire connection. My Windows 7 PC with Windows Live Movie Maker does not have a Firewire connection. My camcorder has a USB port, a DV and an A / v connection Should which device I use to capture Live Movie Maker videos?

  I have a Sony DCR-HC40 camcorder that my Movie Maker on my Vista PC suddenly refuses to acknowledge. I use the same connection I've used for years, A Firewire connection. My Windows 7 PC with Windows Live Movie Maker does not have a Firewire connection. My camcorder has a USB port, a DV and an A / v connection Should which device I use to capture Live Movie Maker videos?

  ========================================
  Windows 7 was designed to import video from MiniDV
  Tapes... THROUGH THE... IEEE 1394 FireWire (Sony i.LINK) connection

  Looks like your Sony calls... but I think there are a
  FireWire port on your computer.

  The following items may be worth a visit:

  How to import videos in Windows Live Movie Maker
  http://www.Dummies.com/how-to/content/how-to-import-videos-into-Windows-Live-Movie-Maker.Navid-323836.html

  How to import pictures and videos from cameras and other devices
  http://Windows.Microsoft.com/en-us/Windows-Live/Movie-Maker-import-photos-videos-camera-FAQ

• Unable to save the changes in the resolution of the screen on Satellite P20

  Recently, I have problems with the resolution/quality of images on my laptop P20.

  When I try to remedy this in the tab settings of Options Diplay it me does not save the changes to the screen resolution or image quality. I am currently using the default monitor on NVIDIA GeFOrce FX Go5200.

  Any ideas?

  Hello

  For all the ideas give us more information please. I just know that the resolution of the standard screen for this laptop is 1440 x 900 and if the right display driver is pre-installed to avoid any problems.

  I used Satellite P20-303 (nVIDIA GeForce FX Go5600) nearly two years with the original display driver and have never had any similar problems.

• Unable to save the PDF to my docs using 11.0.08 XP

  I have Adobe Reader 11.0.08 on a Windows XP computer.   I used to be able to "save under" a PDF file to my documents.  Now, whenever I do a "save under", it goes into a temporary file in Internet Explorer. There is a drop down menu on the screed "save under" who won't let me choose 'Save in the account online', 'acrobate.com' and 'New account' how not to eliminate the options and save in my docs?  Thanks in advance for your help.

  Hello

  Please go to edit > Preferences > General > uncheck the option 'See the saving files from online storage' and then see if you still experience the same or not.

  Concerning

  Sukrit diallo

• Unable to save movie in WLMM__Error: 0 x 87160139

  Hello, I have questions to save my movie finished. I have read many forums and tried the below troubleshooting steps.

  -J' have made sure all files have not moved from the original location, since I imported in wlmm.
  -I made sure that I did not remove all the files that I use in my project, from the moment that I imported into wlmm.
  -J' rebooted wlmm and tried to save again, but nothing helped.
  -J' tried to restart my computer, then opening wlmm > my project > tried to save,... .no disp.
  -J' have made attempts to save in different contexts (for HD, computer, DVD and email)... does not
  -J' I tried to create my own frame and save... Needless to say, it has failed.
  -J' have same, maddeningly, just trying to save time and time again.

  Here are some basic steps I tried on my own desperate attempts in solve my problem... I can't. Here are the most common error message I get when trying to save.

  Sorry, unable to save your movie. Find missing files or delete the unusable items in your project and then try again.
  Error: 0 x 87160139
  Not the most useful message... in fact, it's the least useful error on the face of this planet. I knew the way to know, to the best of my knowledge, what files are unusable. (is it me?)

  Based on what I already read of problems of others, it's a common mistake, however, I was not able to achieve a 'happy ending' on any of the threads I've read. (fwiw, most of what I read is from late 2009, early 2010) Could I not find a recent fix by chance?

  If anyone can shed some light on my problem here, it would be much appreciated.

  Thank you!

  Hello, I have questions to save my movie finished. I have read many forums and tried the below troubleshooting steps.

  -J' have made sure all files have not moved from the original location, since I imported in wlmm.
  -I made sure that I did not remove all the files that I use in my project, from the moment that I imported into wlmm.
  -J' rebooted wlmm and tried to save again, but nothing helped.
  -J' tried to restart my computer, then opening wlmm > my project > tried to save,... .no disp.
  -J' have made attempts to save in different contexts (for HD, computer, DVD and email)... does not
  -J' I tried to create my own frame and save... Needless to say, it has failed.
  -J' have same, maddeningly, just trying to save time and time again.

  Here are some basic steps I tried on my own desperate attempts in solve my problem... I can't. Here are the most common error message I get when trying to save.

  Sorry, unable to save your movie. Find missing files or delete the unusable items in your project and then try again.
  Error: 0 x 87160139
  Not the most useful message... in fact, it's the least useful error on the face of this planet. I knew the way to know, to the best of my knowledge, what files are unusable. (is it me?)

  Based on what I already read of problems of others, it's a common mistake, however, I was not able to achieve a 'happy ending' on any of the threads I've read. (fwiw, most of what I read is from late 2009, early 2010) Could I not find a recent fix by chance?

  If anyone can shed some light on my problem here, it would be much appreciated.

  Thank you!

  =============================================
  It is possible that one or more source files are
  not totally compatible with WLMM. And it is possible
  your project is too big or too complex.

  Also, it may be interesting to try to post your question
  in the following forum:

  Windows Movie Maker Forums
  http://www.windowsmoviemakers.NET/forums/

  A search on the Forums of Movie Makers for 0 x 87160139
  can turn some useful in:

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• HP 6500 scan high resolution works well with the solution Center HP; but is solid black w/imgage software for editing

  I got an OfficeJet 6500.

  If I try to scan a picture at a very high resolution, using an image of image editing software will come out black.

  I can scan the image using the HP solutions, at the same high resolution Center, and the image will scan very well.

  I think there is a setting for the Windows operating system that needs to be adjusted. I know because I had this same problem once before.

  I found the solution to my problem. but my computer crashed and I had to reinstall the full Windows operating system. I lost the changes I had made. It was in January 2011.

  I don't remember when I had the answer to my problem but I thought that I asked the question in the HP forum (it would have been some time in late 2010) and then someone answered with the solution to my problem. But I can't find the post I did then.

  -My operating system is Windows 7, with a 64-bit operating system.

  -The processor is an Intel Celeron 2 .50GHz.

  I would appreciate any help someone can offer.

  Hello JimTrail

  After watching this on the web, it seems that you is maybe to something. From what I found, GIMP uses a lot of resources, especially true for larger images. He isn't able to handle the scanning of an image as large as 4800dpi without additional RAM or virtual memory to compensate for the RAM.

  My suggestion would be to increase the size to the recommended or higher. Out of curiosity how much physical RAM have you? Microsoft recommends that virtual memory for no more than 3 times the amount of RAM installed. See article: change the size of virtual memory.

  You can also see the article below on the Tile Cache GIMP.org.

  How to set your Tile Cache

• Can't read my video I created with movie maker in any VCR?

  running windows xp home and I created a movie with movie maker and now it will not play in any VCR, but he will play in this pc, I want to take the film anywhere and it play?

  HighMAT is obsolete now and there is very little
  DVD players that recognize the format.

  If you want to create a video CD (VCD) or a video
  DVD... you will need DVD Authoring software.

  First step would be to save the Movie Maker project
  in the. Format WMV movie to a folder on your hard drive.
  Then you could play it in Windows Media Player and
  Share it with others.

  XP Windows Movie Maker 2.1...
  To save in a .wmv movie file...
  Type of... CTRL + P (or go to...) File / save movie file)
  to open the wizard movie recording.
  Choose... My computer.
  Next /.
  Enter a name and a location.
  Next /.
  ICT... "Best quality for my computer.
  Next /.
  Wait while the movie is saved.
  Finishing...

  If you want to create a video CD (VCD) or DVD video...
  for use in a self-supporting import of DVD player, the movie
  the freeware next to the file in the DVD authoring software...
  maybe worth a try.

  (FWIW) It's always a good idea to create a system
  Restore point before installing software or updates)

  DVD Flick
  http://www.videohelp.com/tools/DVD_Flick
  (the download is: "dvdflick_setup_1.3.0.7.exe")
  (Download from (direct link) is the fastest).

  Save the file to your desktop or a folder on your
  hard drive and install from there.

  Be sure to read the Guide:
  http://www.dvdflick.NET/Guide.php

  Tutorials:

  Tutorial DVD Flick
  http://beginwithsoftware.com/videoguides/DVD-flick-Guide.html

  Burn any Format video DVD PC
  http://www.freevideoworkshop.com/dvdflicktutorial.htm

  AVI to DVD with DVD Flick Guide
  http://www.Digital-Digest.com/articles/AVI_to_DVD_using_DVD_Flick_page1.html

  To create a video DVD base that should play in most
  free-standing DVD players... try the following...

  First... read the DVD Flick Guide to familiarize
  with the program.

  Open DVD Flick and insert a CD or DVDs your
  burner.

  If the window of Autorun from your computer... just close it.

  Click the project settings button and check... Video /.
  Target format... residents United States... Choose... NTSC /.
  Accept.

  (Also... If you want to create a video CD (VCD) go to...
  Project settings / general / target size... and select...
  CD-700 (700 MB).

  The title button left click Add and navigate to your
  Video clips and select the ones you want on the DVD.

  You can have by selecting one and then use
  the up and down buttons.

  To allow a longer time on the DVD... left click the
  The project settings button / select video / open the target
  Bitrate of drop window. Choose a will more small number
  result in a longer time on the DVD. Press on... Accept.

  The vertical bar to the left of the screen will tell you
  How much compression you need.

  Left click on the button create DVD / OK / Yes / Yes.

  Please wait while the DVD is created.

  When the text "Completed successfully" is displayed you
  DVD Flick can close. Now you can eject your DVD
  and play in your DVD player.

  At some point you might want to buy more
  software advanced as Sony, Cyberlink, Nero, Roxio,
  Adobe, Ulead, etc... but at least it is a start.

  Good luck.

• XP Pro and Windows Movie Maker

  I am running XP Pro and have created a slide show in Windows Movie Maker, but cannot burn to a disc.  I get a message to insert a blank disc, which, of course, I already have.  I downloaded Windows DVD maker, but which requires an ISO file to burn and the Movie Maker saves the file under a MSWMM file.  Can someone help me?   Thank you.

  I'm guessing that you want to create a video DVD that
  will play in a free-standing DVD player.

  First you must save your Movie Maker project to
  the. WMV video format (.mswmm is the project
  folder and is only useful for a re-release in Movie Maker).

  To save in a .wmv movie file...
  Type of... CTRL + P (or go to...) File / save movie file)
  to open the wizard movie recording.
  Choose... My computer.
  Next /.
  Enter a name and a location.
  Next /.
  ICT... "Best quality for my computer.
  Next /.
  Wait while the movie is saved.
  Finishing...

  OK... now you have a video clip and you have DVD
  Software to burn a DVD video creation.

  The following freeware can be worth a try:

  (FWIW) It's always a good idea to create a system
  Restore point before installing software or updates)

  DVD Flick
  http://www.videohelp.com/tools/DVD_Flick
  (the download is: "dvdflick_setup_1.3.0.7.exe")
  (Download from (direct link) is the fastest).

  Save the file to your desktop or a folder on your
  hard drive and install from there.

  Be sure to read the Guide:
  http://www.dvdflick.NET/Guide.php

  Tutorials:

  Tutorial DVD Flick
  http://beginwithsoftware.com/videoguides/DVD-flick-Guide.html

  Burn any Format video DVD PC
  http://www.freevideoworkshop.com/dvdflicktutorial.htm

  AVI to DVD with DVD Flick Guide
  http://www.Digital-Digest.com/articles/AVI_to_DVD_using_DVD_Flick_page1.html

  To create a video DVD base that should play in most
  free-standing DVD players... try the following...

  First... read the DVD Flick Guide to familiarize
  with the program.

  Open DVD Flick and insert a blank DVD in your drive.

  If the window of Autorun from your computer... just close it.

  Click the project settings button and check... Video /.
  Target format... residents United States... Choose... NTSC /.
  Accept.

  The title button left click Add and navigate to your
  Video clips and select the ones you want on the DVD.

  You can have by selecting one and then use
  the up and down buttons.

  To allow a longer time on the DVD... left click the
  The project settings button / select video / open the target
  Bitrate of drop window. Choose a will more small number
  result in a longer time on the DVD. Press on... Accept.

  The vertical bar to the left of the screen will tell you
  How much compression you need.

  Left click on the button create DVD / OK / Yes / Yes.

  Please wait while the DVD is created.

  When the text "Completed successfully" is displayed you
  DVD Flick can close. Now you can eject your DVD
  and play in your DVD player.

  At some point you might want to buy more
  software advanced as Sony, Cyberlink, Nero, Roxio,
  Adobe, Ulead, etc... but at least it is a start.

  Good luck.

• Movie Maker. Why it wont play on DVD player?

  I just did a picture / audio in Movie Maker. I want to play on a normal DVD player. How can I do this? I tried to burn to the CD - R and DVD-R. Both will only play on computer.

  Using Win XP?

  The only version of Win XP Movie Maker the option offer
  to burn a DVD-video is the "Media Center Edition 2005".

  To create a video DVD which will play in a free-standing DVD player...
  First, you must save your Movie Maker project in the. WMV or. DV - AVI
  format and then import the file into the DVD Authoring software.

  To save in a .wmv movie file...
  Type of... CTRL + P (or go to...) File / save movie file)
  to open the wizard movie recording.
  Choose... My computer.
  Next /.
  Enter a name and a location.
  Next /.
  ICT... "Best quality for my computer.
  Next /.
  Wait while the movie is saved.
  Finishing...

  To save a DV - AVI movie file...
  (and other options)
  Type of... CTRL + P (or go to...) File / save movie file)
  to open the wizard movie recording.
  Choose... My computer.
  Next /.
  Enter a name and a location.
  Next /.
  Show more choices.
  Other parameters.
  Open the window of the droplet and choose... DV - AVI.
  Next /.
  Wait while the movie is saved.
  Finishing...

  Perhaps the following freeware will help you get started:

  (FWIW) It's always a good idea to create a system
  Restore point before installing software or updates)

  DVD Flick
  http://www.dvdflick.NET/Download.php
  (the download is: "dvdflick_setup_1.3.0.7.exe")

• How can I change the format of a film shot in Microsoft Movie Maker?

  Help! Windows Movie Maker: convert a file

  How can I change the format of a movie in movie maker from microsoft so that it can be universally accessed? or uploaded to youtube?

  I suspect you want to view/download the. Project MSWMM file
  which is only useful for re - edit in Movie Maker.

  Try to save your Movie Maker project in the. Film WMV format.
  With your project open in Movie Maker are... try the following steps...

  To save in a .wmv movie file...
  Type of... CTRL + P (or go to...) File / save movie file)
  to open the wizard movie recording.
  Choose... My computer.
  Next /.
  Enter a name and a location.
  Next /.
  ICT... "Best quality for my computer.
  Next /.
  Wait while the movie is saved.
  Finishing...

  The next YouTube document offers guidelines for downloading video:

  Quote: "not bigger than 2 GB and no more than 15 minutes in length"

  YouTube Help Center: for starters: how to download
  http://www.Google.com/support/YouTube/bin/answer.py?hl=en&answer=57924

• Can I transfer a file to Windows Movie Maker on a DVD?

  I made a video on Movie Maker of Window and I want to put it on a DVD to show my upcoming Big birthday party. Is there a way I can do this, and if I can, how, and if I can't do what I can do to show! Help, please!

  You posted in a forum of Win XP, so I can only guess that you're running XP...
  If_Yes... the only version of Windows XP which adds a DVD video option for
  Movie Maker is Windows XP Media Center Edition 2005 and it was not
  meant to be extremely reliable.

  Beyond that... you must save your Movie Maker projects in the. WMV or
  . AVI format movie and then import them into the DVD authoring software to
  create a video DVD. (save info pasted at the end of this message)

  The following freeware should help you get started:

  (FWIW) It's always a good idea to create a system
  Restore point before installing software or updates)

  DVD Flick
  http://www.dvdflick.NET/Download.php
  (the download is: "dvdflick_setup_1.3.0.7.exe")
  (On the second screen, left click 'Direct link' to the top of)
  the page)

  Save the file to a folder on your hard drive and
  install from there.

  Be sure to read the Guide:
  http://www.dvdflick.NET/Guide.php

  Tutorials:

  Tutorial DVD Flick
  http://beginwithsoftware.com/videoguides/DVD-flick-Guide.html

  Burn any Format video DVD PC
  http://www.freevideoworkshop.com/dvdflicktutorial.htm

  To create a video DVD base that should play in a free
  permanent drive DVD... try the following...

  First... read the DVD Flick Guide to familiarize
  with the program.

  Open DVD Flick and insert a blank DVD in your drive.

  If the window of Autorun from your computer... just close it.

  Click the project settings button and check... Video /.
  Target format... residents United States... Choose... NTSC /.
  Accept.

  The title button left click Add and navigate to your
  Video clips and select the ones you want on the DVD.

  You can have by selecting one and then use
  the up and down buttons.

  Left click on the button create DVD / OK / Yes / Yes.

  Please wait while the DVD is created.

  When the text "Completed successfully" is displayed you
  DVD Flick can close. Now you can eject your DVD
  and play in your DVD player.

  At some point you might want to buy more
  Advanced Cyberlink, Nero, Roxio, software
  Ulead, etc... but at least it is a start.

  To save in a .wmv movie file...
  Type of... CTRL + P (or go to...) File / save movie file)
  to open the wizard movie recording.
  Choose... My computer.
  Next /.
  Enter a name and a location.
  Next /.
  ICT... "Best quality for my computer.
  Next /.
  Wait while the movie is saved.
  Finishing...

  To save a DV - AVI movie file...
  (and other options)
  Type of... CTRL + P (or go to...) File / save movie file)
  to open the wizard movie recording.
  Choose... My computer.
  Next /.
  Enter a name and a location.
  Next /.
  Show more choices.
  Other parameters.
  Open the window of the droplet and choose... DV - AVI.
  Next /.
  Wait while the movie is saved.
  Finishing...