Unable to save my new WRT160N

Similar Questions

• HP ENVY 4520 all-in-one: unable to save the new printer

  To register, the first thing required is a model #, & when I get mine, the answer comes back - 0 results found. I can go no further, until they recognize the printer they sold to me.

  Hi @elebit,

  Welcome to the HP Forums!

  I noticed that you are unable to save your new printer HP ENVY 4520. I am pleased to see that for you!

  Please, take a look at the Plug, for this printer. Who have the exact model number and try to save again.

  If this, or one of the posts on this thread, helped you to solve the problem, please click on accept as Solution on the message. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

  I hope this helps!

• Unable to save my new Toshiba laptop

  I just bought a new Toshiba laptop - but am unable to even register.
  Whenever I have send the form, the site says that my phone number is not as it should be - the format is not correct.

  I am at a loss to fix the problem. No help here please?

  Do you use the http://eu.computers.toshiba-europe.com/innovation/generic/services_warranty_reg_map_eu/ for the registration page?

• Unable to save my new laptop

  I carefully typed and checked the S/N number, SNID, (both on a label on the bottom) and the identification number of the system screen. All three are rejected when I try to save. I found different positions of people wh have been unable to resolve the problem.

  Can someone tell me where is the serial number? If it is one of the three sources I have just mentioned, can someone Acer contact me so that I can record? Thank you.

  This has been answered on another thread. The serial number is on the sticker on the bottom and starts with SN. There is no letter o Zeros are mixed with the letters, but there is no letter o in a number of series of Acer.

• 6.0.2 is unable to save the new bookmarks - and I did not bookmark running modules. Help?

  When I started my laptop after work, I met an unpleasant surprise - my Firefox 6.0.2 had reset itself (but kept my favorites). I had to relocate where my buttons and toolbars in the program went, relog my information for Echofon, and I'm dealing with NoScript now. Now, I find that Firefox 6.0.2 does not save my favorites. I don't have any deal with the module with bookmarks, and it was working fine before. Using the shortcut Ctrl + D does not either, and nor not entered manually. What gives?

  One possible cause is a problem with the places.sqlite file that stores the bookmarks and history.

  • http://KB.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox

• Unable to save my new Satellite L500-126

  Hello

  I bought a Toshiba Satellite L500-126 may 7 this year, and I tried to make the record (cuz it said in the offer that you can do between April 1 and June 30, 2010), but it was cancelled because "the registration period has passed..."

  What should I do?

  Hello

  I think you should contact the store you purchased and ask them about registration. Moreover, I had the same problem with the registration for my laptop, I just contacted the dealer and they fixed.

  Welcome,

• Unable to save my new payment method information

  My credit card has expired so I connected to change the details of a credit card, but for some reason any my billing address (which is always exactly the same thing) is not accepted.

  I tried to keep the info exactly as it was (which worked fine before), mix and writes the information in different ways, but always attack nothing. This message appears:

  The billing address information are not valid. Please correct your address and try again.

  Any ideas?

  Thanks in advance.

  See if management can help you:

  To the link below, click on the still need help? option in the blue box below and choose the option to chat or by phone...

  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html ( http://adobe.ly/19llvMN )

  Manage your membership and your payment. Creative cloud

  https://helpx.Adobe.com/x-productkb/policy-pricing/membership-subscription-troubleshooting-creative-cloud.html

• Since the upgrade to El Capitan, I am unable to SAVE new documents

  When I go to save something new, my Mac wonder where to save it too but the screen is great to use the following command to follow-up.  I have to Force Quit Pages to clear my screen.  Help, please!

  Hi tangojvg,

  The Save dialog box is too big?

  To reduce the Save dialogue box, click on the ^ to the right of save it under:

  

  The ^ becomes v and the Save dialog box is smaller.

  

  Kind regards

  Ian.

• Error message on Windows XP, "Windows-Delayed Write failed, windows was unable to save all the data for the file.

  I use windows xp as the operating system. I bought the new 3G huawei data card. While surfing internet, between a pop-up is displayed

  «Windows-delayed write failed, windows was unable to save all data in the file C:\Documents and settings\new\Local Settings\Application Data\Google\Chrome\User Data\Default\Session Storage\004285.log.» The data has been lost. This error can be caused by a failure of your computer hardware.

  After this computer freezes and I have to restart my computer. Please help me how to fix this problem.

  The error basically says that he tried to write something on your hard drive and for some reason that unfinished write operation.  This could indicate a bad sector on your hard disk, damaged disk or a problem with your hardware.

  Whenever a problem involving a disk read or write appears, my first approach is to perform a verify operation of the disc to the hard drive.  Even if this is not your problem, it is a step of good routine maintenance. Run the disk check with the "/ R" or "Repair" option.  Note that the real disk check will be presented at the next reboot, will run until Windows loads completely, cannot be interrupted and can take more than a few hours to run depending on the size of your hard drive, the quantity and type found corruption and other factors.   It is better to perform during the night or when you won't need your computer for several hours.

  'How to perform disk in Windows XP error Cherking'

  <>http://support.Microsoft.com/kb/315265/en-us >

  HTH,

  JW

• Write delay failed unable to save all the data for the file $Mft

  Have a frustrating problem.  Help is greatly appreciated.  Learned the hard way and lost a dwg important issue which was unrecoverable.  Bought a new drive external hard seagate.  Could not back up the entire system with software pre-installed.  Download acronis true image home 2011.  Tried to backup system.  Receive error when trying to backup messages; 'Delay to failure of Scripture; Reading of the sector; Windows was unable to save all the data for the file $Mft. The data has been lost.  Have tried many fixes.  Unable to disable write caching method (grayed out / unclickable).  Played regedit 'EnableOplocks' is not listed to select.  Attempted to run microsoft 'fix it' and got the blue screen of death.  Short hair out of my head.  Suggestions appreciated.

  I don't know where Microsoft 'Technical support engineers' get their information.

  Write caching without a doubt "does apply to external hard drives", but it is usually disabled to prevent to sort the problem you are experiencing.

  I've seen several positions reporting to the same question that you do.  All of these positions were with SATA drives.  Is your Seagate eSATA drive?

  The disc is recognized as an external drive in Device Manager?  In Device Manager, go to the drive properties dialog box and click the policies tab.  An external drive should have two options: "Optimize for quick removal" and "Optimize for performance".  An internal hard drive shows the options as gray (with 'performance' selected), but there should also be a checkbox "Enable disk write cache" under the second option.

  What shows in your policies tab?

  If I understand correctly, "writeback" or "write behind" is implemented by disc material or its pilot.  If the option is not available on the drive properties > policies tab, I would suggest to contact Seagate support.

• Unable to save my documents properly - what is a Temp environment Variable?

  Somehow, my computer at home, using Vista Home Premium, started making of my new documents 'Read only' and I'm unable to save after you change. It gives me the error message "Word could not create the work file. Check the temp environment variable. "It's extremely frustrating, as I am in an active job search and need to change my letters, etc., all the time at the moment.

  Hi Lpoelle,

  You can follow the procedure of article that could solve the problem.

  http://support.Microsoft.com/kb/822005

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/522fe29d-725D-4cf5-a96a-d27113d8db69

  For more help on this issue, you can post your questions in the Office Discussion groups. Please visit the link below to find a community that will provide the support you want.

  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Hope this has been helpful.

  Bindu S - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think

• I'm unable to save all the files on my pc which runs with Vista Ultimate operating system

  I'm unable to save all the files in any application. The dialog box type of flickers in the background, but nothing happens.
  Happens if I am recording a chart on the web using a web browser. Happens when I create a file in Excel or Word, Paint, and Serif (possibly other applications which I am not using at the moment) and then click on "Save as."

  It happens if I opened a pdf file from any source (be it on my drive hard or on the web) and click on "Save as" to save another copy.

  It happens when I'm using a web-based e-mail service, and if I want to add an attachment, as soon as I click on the Upload button, nothing happens.

  It happens when I try to export a scanned image of my scanner, to a file.

  I get no error with the exception of this shimmering when one would expect to see a dialog box.

  But, it happens when I create a new file in Notepad, which is a weird exception

  It started to arrive 3 days ago, and I have not loaded any new software changed the settings I can think. (with the exception of mcAfee who has downloaded an update almost everyday)

  I restarted my computer several times since and searched the net to find answers, but it seems I'm the only one afflicted.

  I would appreciate if someone can shed some light on this.

  Thank you

  I ran scandisk and check sfc, but that did not help. Instead of trying a system restore, I tried the opposite: installed at every possible update available.
  Result: Problem solved!

  I installed 14 updates:
  KB974306
  KB976325
  KB905866
  KB943729
  KB960362
  KB969058
  KB971512
  KB971514
  KB972036
  KB975364
  KB976470
  KB933713
  KB971513
  and Windows Internet Explorer 8

• Adobe Illustrator for error message "unable to save the picture. You do not have enough access privileges. "ID:-5000"

  Trying to save the illustrator on new Macbook pros and the system file gives me the Illustrator from Adobe to the error message "unable to save the picture. You do not have enough access privileges. ID:-5000 "... No idea what it is how to get a rise out of privileges?

  You are not allowed to write to the specified folder.

  CHEK your access privileges.

  Also: in case you save to a network: do not.

  Try to save in the Documents folder in your user folder. Then close the document and check what needs to be checked.

  If you need additional assistance, please we say system and version of Illustrator and where you want to save.

• Unable to save the file in PSD - PS says that the file is over 2 GB when it's not

  I have a PSD that I worked on for many months. This week I got a new computer. When I open this file on my new computer, I'm unable to save as a PSD. The size of the file, in Windows Explorer, is 600 MB. Depending on the size of the PS CC Document displayed at the bottom of the Document window, the size of the document is 288.4 M / 1.77 G. Yet, when I try to save this file on my new computer, I get this error:

  Could not save it as "filename.psd" because the document is larger than 2 gigabytes.
  See Help topic "backup files" for more information.

  I do not understand how I worked on this document for several months and never had a problem with recording it, even now, on my new computer, it is impossible to save. My new computer has a secondary SSD hard drive that I use as the primary scratch disk. The new computer also has more RAM and a processor more. I had copied all my files from the old computer to the new preferences, and I do not see all of the settings are different between the two computers. Can someone please provide some guidance?

  (Note: I've been running PS CC x 32 because the x 64 version is not stable on my computer.)

  
  Size of the file as that displayed in the Windows Explorer: 600 941 KB.

  NEW: Document size such that displayed in the Document window: 288,4 M / 1.77 G
  OLD: Paper size such as displayed in the Document window: 288,4 M / 1.77 G

  NEW: Adobe Photoshop Version: 14.2 (14.2 20131211.r.515 2013/12 / 11:23:00:00) x 32
  OLD: Adobe Photoshop Version: 14.1.2 (14.1.2 20130923.r.427 2013/09 / 23:23:00:00) x 32

  NEW: operating system: Windows 7 64-bit
  OLD: Operating System: Windows 7 64-bit

  NEW: Version: 6.1 Service Pack 1
  OLD: Version: 6.1 Service Pack 1

  
  NEW: Physical processor count: 4
  OLD: Number of physical processor: 8

  NEW: The number of logical processors: 8

  NEW: Processor speed: 3591 MHz
  OLD: Processor speed: 2394 MHz

  NEW: Built-in memory: 32694 MB
  OLD: Built-in memory: 30718 MB

  NEW: Free memory: 25810 MB
  OLD: Free memory: 25633 MB

  NEW: Memory available to Photoshop: 3255 MB
  OLD: Memory available to Photoshop: 3255 MB

  NEW: The memory used by Photoshop: 60%
  OLD: The memory used by Photoshop: 69%

  NEW: Image tile size: 128K
  OLD: Image tile size: 128K

  NEW: Image cache levels: 6
  OLD: Image cache levels: 6

  NEW: Scratch or volumes:
  C:\, 930.2 G, 686,5 free G
  B:\, 111.8 G, 103.6 G free
  OLD: Scratch or volumes:
  C:\, 930.7 G, 567,1 free G

  Hello

  To ensure the follow-up to future readers who find this post, indeed it was a 14.2 bug fix which fell from Mindy file.

  14.1.2 and older versions of Photoshop, it was possible to save a document in PSD format which would not properly push the limit of 2 GB of formats (vector data stuck with the Max compatibility). We had a report of someone who inadvertently produced 300 + GB of files (http://forums.adobe.com/message/5666971#5666971). With 14.2, now make us some additional controls while recording and to issue warning limit file size. One of these controls is to the pixel dimensions of the data (the data of superior image then 30K pixels).

  Although MIndy file na not to exceed the 2 GB limit, it triggers the check of size of pixel data. There is a smart object layer that put across 6000%.

  So if you are getting 2 GB limit warning and didn't in previous versions, take a look at the scale of values on smart object layers and note the layers covering the area pixel values in the Info Panel and checking vector data (pasted from Illustrator guides).

  Kind regards

  Steve

• Unable to save in plain text format

  I'm unable to save money in text format. Need to convert PDF to plain text. I can save it as a Word, but I need to save it as plain text.

  When he converted, and the new text file opens it is empty.

  Jill

  If you use Acrobat 10 or 11 Pro "Recognize text" - on this file.

  Maybe the document has been parsed. A scanned document contains any text, it's just a picture. Recognize the text will make the optical recognition of characters (OCR) on the document, and then you can save as text.  You will have to look to find errors in the OCR.  Sometimes, he can hardly discern the characters.