Unable to schedule the disk, always set to 'never' Defragmenter in Vista

Similar Questions

• trying to create an ESXi data store on the local drive.  Configuring the host error: unable to update the disk partition information

  I'm a newbie on ESXi and don't know what it takes to get ESXi correctly partition my drive SATA 500 correctly.

  I will implement a laboratory unit to carry out tests for ESXi and ESXi is not quite correctly the disk partitioning or do not see a good partition in order to create a data store.

  This system was able to correctly identify and configure a data store on a small 80 GB seagate SATA disk, however, this isn't quite enough storage so I swapped the hard drive and tried to re - install ESXi on the new hd.

  I use a USB boot ESXi since and it is launched and configures the card intel pro1000 pci ethernet correctly.  also correctly the id of the cpu and memory.  everything seems fine and he is even able to see the hard drive.

  Here are some screenshots of the process that I go through to make my data store...

  on this photo-sous the column titled 'available' is 'none', also said, under the title 'san identifier' he said 'not applicable' - I guess that's not quite right?

  

  

  

  

  and disappointment - failure?

  

  I tried to go into the bios if there are some settings I need to do to get this hard drive set up... I don't understand enough about ESXi to find out why the drive is not found and configured correctly.  is this a bios problem w / my system or a problem of ESXi?

  pls help!

  You have generally not, but it might be interesting to start with something like a Linux live CD and then using gparted or other to wipe all the top partition information.

• Unable to use the Disk Defragmenter tool in Windows XP

  Original title: I use windows xp why used my computer open the disk defragmentation

  If I try to open the disk defrag it says the file isint there.

  Hi Gabrella,

  I'm glad to know that you've posted queries in Microsoft communities.

  According to the description, it looks like you aren't able to open the disk defragmentation in Windows XP.

  I have a couple of steps that should help you with this problem.

  Method 1:

  Try the fixit and the steps mentioned in this link and check.

  http://support.Microsoft.com/kb/314848

  Method 2:

  There are several reasons why the built-in defragmentation may not work correctly:

  Step 1. The disk is too full (you need at least 15% free space, sometimes 20%). Solution: Delete files unnecessary and programs until you have more than 20% free space.

  Step 2.

  The disc is damaged and must be repaired. Solution:

  a. open "My computer" and right-click on the drive that you want to disable frag.
  b. Select 'Properties' and click on 'tools '.
  c. Select "Check now" to check the drive for errors.
  d. Select the two options and click on 'start '.

  (This can take time and can restart the PC so that it can do the check at boot time. Be patient and let it complete).

  Step 3. There may be malware on the PC
  Solution - run the Antivirus and Antispyware scans (can take a long time if ever made. Be patient):

  Viruses can cause these problems. Scan your computer for the Microsoft Security Scanner, which allows to get rid of viruses, spyware and software malware.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  Note: The Microsoft Safety Scanner expire after 10 days from the date of installation.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Step 4. If still no luck, try disabling the screen saver when you run Disk Defrag (you should very well leave the system only when running the built-in defragmentation utility).

  Step 5. If still no go, try to run the defragmenter in Mode without failure. If she runs, something interferes with it in standard mode and stalking the interference may not be easy. Note: Some versions of Win 7 disable the ability to run the built defragmentation tool in safe mode. If disabled, it will say when you try to start it in safe mode.

  Step 6. Disk Defragmenter is no longer on the system or is damaged while it needs a re - install. Solution: Reinstall the built-in function.

  There are several ways to re - install the built-in defragmentation tool

  A:
  a. open the "Start" menu.and click run.
  b. type '% Windir%\Inf'

  c. in the window that opens, find the file named «dfrg.inf»
  d. right-click on "dfrg.inf" and "install".

  B:
  a. go into "start > run" on your computer.
  b. Type "rundll32.exe setupapi, InstallHinfSection DefaultInstall 132% windir%\inf\dfrg.inf" and press "Enter."
  3. click 'OK' to make the program automatically reinstall itself.

  C:
  a. go to start > all programs > Accessories > right click on command prompt > select 'run as administrator '.
  b. at the command prompt, type "regsvr32 dfrgsnap.dll" and press "enter."
  c. type 'regsvr32 dfrgui.dll' and press 'Enter '. This will reinstall the missing files to Defrag.

  Keep us updated on the status of the issue. For any help about Windows, you can still post on the Microsoft Community.

• X 60 (6365CTO) - unable to access the fan to set "Fan Error"

  Symptoms to turn on the computer:

  1. the fan runs for about 5 seconds,
  2. Intel/ThinkPad/lenovo logos appear for about 30 seconds,
  3. the screen darkens,
  4. 2 short beeps,
  5. "Fan error" appears in the upper left corner and
  6. the computer turns off

  Action taken:

  1. Blast compressed air into the fan breaks down, "fan error" suite
  2. Using the "Tablet ThinkPad® X 60 and X 61 Tablet Hardware Maintenance Manual" - 1200 fan on page 87 (http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles_pdf/42x3551_02.pdf)
  3. = Removed the battery (1010 page 55)
  4. = Removed hinge (1040 page 60)
  5. = Removed the keyboard (1050 page 62)
  6. = Keyboard setting removed (1080 page 67)
  7. = Removed PCI Express Mini Card for Wireless LAN (1120 page 74)
  8. = Not applicable in order to clear the PCI Express Mini Card for network EXTENDED wireless (1130 page 75)
  9. = 'Loose' Assembly LCD (page 74) (has not deleted)
  10. == Lost overall to switch Bluetooth cable and base cover on page 83 pen

  One of the steps in "set pen to switch, cable Bluetooth and the basic coverage" must "remove the stand from the shield.  In my 60 X, it seems to be a card (FRU PN:41W4177), which is to provide support.  The Board of Directors is fixed by 6 screws or rivets.  This forum is not visible in the manual diagrams.  Note: the cables leading to the LCD screen run under the Council.

  Would appreciate help or advice.

  Thank you very much!

  Laura

  Laura

  Have a look here http://www.lenovoservicetraining.com/ion/X60/index .html

  Hope this helps

  John

• Unable to update the DVD region setting even if there is 1 change remaining allowed.

  Try to change the region of 1 to 4 (Australia) settings on the settings of my dvd region tab.  Even though I have still 1 chance and have inserted a region 4 dvd in the drive, it still gives me the following error message:

  DVD region change error

  
  

  Unable to update the settings in the region.  The drive reports that it requires

  media of the destination region (region 4) Please insert

  an environment appropriate and try again

  Hi Jackie477,

  That you change the settings of 1 to 4 (Australia) area, we advise to insert any media (CD or DVD) of Australia in the CD/DVD drive and try to change the region settings to see if it works very well.

  See change region for DVD players (valid also for Windows 7)

  Visit our Microsoft answers feedback Forum and let us know what you think.

• My monitor times out after 10 minutes, even with all the power settings set to 'never '.

  How the hell can I stop the monitor to close every 10 minutes?

  Are you sure that the monitor stops and it is not the screen saver 'Black Screen '?

  If you are sure that the monitor is turned off:

  Have you already checked the Plan "Advanced settings" (a link on the page edit Plan settings), make sure that 'turn off the display after...' is set to 'never '. Or maybe you need to set "Adaptive screen Shutdown" OFF.

  If it still does not, maybe it is a parameter of your graphics card, use the Control Panel then.

• Problem of thumbnails (without the option "always show icons, never thumbnails")

  When I installed win7 32 bit, wanted to optimize for performance, I have so I made the changes and turn off thumbnails view and cache. But yesterday, I wanted to turn on again them and that's... the problem appeared: first of all, I have disabled in the policy editor options to disable cached inches and visualization (restarted PC). Then to my computer > organize > Folder Options > view but there is no wtf to "always show icons, never thumbnails" option? I tried to turn it on through advanced system settings but when I checked and applied 'show thumbnails instead of icons'... anything at all... I opened to new advanced system settings and "Show thumbnails instead of icons" is unchecked. I tried everything... restore point before optimizing, restore registry, cleaning thumbs hide with disc cleaner, etc, and I had no success. ;

  Hi fymfifa

  Welcome to the Microsoft Answers Forum!

  I recommend the methods are:

  Method 1:

  According to the tab under organize, there is a default restore tab. This option restores the default option.

  Method 2:

  Run the SFC (System File Checker) on the computer scan to fix system errors to the file on the computer.
  To run a SFC scan, follow these steps:
  Open an elevated command prompt. To do this,

  i. click on Start ,

  II. click on all programs ,

  III. click Accessories , right-click command prompt ,

  IV. and then click on run as administrator.

  v. If you are prompted for an administrator password or a confirmation, type the password, or click allow or continue.

  VI. at the command prompt, type sfc/scannow and press to enter. Once the scan is complete, restart the computer so that the changes take effect

  Below link for reference: http://support.microsoft.com/kb/936212

  Thank you, and in what concerns:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• NB510 - 10 d: unable to launch the disk external multi PA3834E-1DV2

  I have a new NB510 - 10 d with 1 GB of memory mounted factory and bought the Toshiba external drive cross (PA3834E-1DV2) recommended, but I can't seem to run on my computer even when connected to the 2 USB ports and current alternative.

  The drive works properly when connected to my desktop computer, what should I do or add to make it work on my netbook?

  Hello

  There is no necessary requirement.
  The drive is just a device plug-and-play USB 2.0 if you n t need drivers or software to operate.
  As you say, the player works through desktop PC it seems that the ODD is OK.

  In your case, I recommend the reader in all USB ports.
  Also set the BIOS by default to ensure that it would be a good BIOS setting.

• Unable to see the disk iOS iCloud files 9

  Hello

  I use windows 10 and I put some of my files on the folder of the iCloud drive but I am unable to see my files on disc to iCloud on iPhone 5 s via newly introduced iCloud drive iOS app 9. However, I can see the same visiting iCloud online (https://www.icloud.com/).

  Is this what I need to configure on my iPhone?

  iPhone does not have the same ability to render, so you must use an application that matches your type of files.

  You can try Google - for example I googled for Microsoft excel app, since I do not know what you need

  https://www.Google.com/webhp?SourceID=chrome-instant&ion=1&ESPV=2&IE=UTF-8#q=app % % 20will % % 20microsoft % 20excel % 20open 20that program 20files % 20 in % 20icloud % 20drive

• Expiration date of webapps always set to never expire

  When I put an expiration date of section details webapps to 30 days and save.

  the expiry date is always 1-Jan-9999 when you add the article. The expiration date

  no default 30 days from today.

  Why?

  I'm making a few assumptions here as long as you have not given many details to work out, but the setting is for items submitted webapp front ends. It is not the effect on the introduction of the elements via the admin.

  Same as the setting default secure area or the classification of the elements, it's only related to the front-end, client submitted webapp points.

  Hope that answers your question.

• Unable to check the updates/updated to SP2... Vista home Edition? Attempts to load the update has failed as well. Source then help? __

  error code 80070005 update failed... deleted antivirus/firewall try to get the downloaded service.

  Hope that you have not been infected by some bad guys when you deleted the antivirus/firewall. Hope you had at least the Windows Firewall.

  In any case my notes to this forum.

  Error code 0 x 80070005 is also described as ACCESS DENIED (you may not to install updates.

  Please check that you are logged into an account with administrative privileges.

  Please follow these instructions if you encounter this error code during checking or install updates via Windows Udpate. What follows applies only to Windows Vista.

  1. Download AccessChk (Sysinternals).  This tool allows you to assess the level of access of some users or groups of resources, including files, directories, registry keys, global objects and Windows services.  Here is the link to download the tool: http://technet.microsoft.com/en-us/sysinternals/bb664922.aspx

  2. save the zip on your desktop and extract the file:
  -Right-click on the file and select extract all...
  -Click Next when prompted for the Destination.

  Therefore, you should see a folder called AccessChk on your desktop.

  3. open the folder AccessChk

  4 press and hold the shift key and right-click in the window.  Select "open here command prompt.

  5. a command prompt window should open a similar message:
  C:\Users\\Desktop\accesschk >

  6. type the following command and press ENTER:
  "" AccessChk.exe "nt service TrustedInstaller" s - n k ' hklm\software\Microsoft\Windows\CurrentVersion\Component Based Servicing "> accesskchk.txt
  Tip: You should be able to copy and paste the command into the command prompt.

  7. close the command prompt window.  Open the Accesschk folder on your desktop (if it has been closed).

  8. double-click on Accesschk.txt (text file), it should open Notepad.

  If this is insufficient,

  1 if please download the subinacl.msi from the following link and save the patch to installation on the desktop:
   
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=e8ba3e56-d8fe-4A91-93Cf-ed6985e3927b&displaylang=en#AffinityDownloads
  SubInACL (SubInACL.exe)
   
  2. go to your desktop and double-click on the downloaded file.
  3. Please select the C:\Windows\System32 folder as the Destination folder during installation. Later, we will use this tool to reset the permissions on the current computer settings.
  4. click on the button 'Start' in the 'Search' bar type: "Notepad" (without the quotes) and press ENTER.
  5. copy the following commands, and then paste them into the opened Notepad window:
   
  off @echo
   
  Subinacl /subkeyreg HKEY_LOCAL_MACHINE/Grant = administrators = f
  Subinacl /subkeyreg HKEY_CURRENT_USER/Grant = administrators = f
  Subinacl /subkeyreg HKEY_CLASSES_ROOT/Grant = administrators = f
  Subinacl % lecteur_systeme % /subdirectories / Grant = administrators = f
  Subinacl /subkeyreg HKEY_LOCAL_MACHINE/Grant = system = f
  Subinacl /subkeyreg HKEY_CURRENT_USER/Grant = system = f
  Subinacl /subkeyreg HKEY_CLASSES_ROOT/Grant = system = f
  Subinacl % lecteur_systeme % /subdirectories / Grant = system = f
   
  @Echo =========================
  Completed @Echo.
  @Echo =========================
  @pause
   
  6. After you paste the above commands, please close the Notepad window. Choose "Save" when you are prompted to save the file. Type "reset.bat" as the file name and choose "Desktop" in the Panel on the left as the save location.

  7. refer to the desktop and right click the reset.bat file, then choose "Run as Administrator".

  8. you will see a window of type BACK treatment.
   
  NOTE: It may take several minutes, please be patient. When it is finished, you will be prompted with the message: "finished, press any key to continue."

  Note: On some driver update installation procedure, we also received this error code, please redirect this kind of case to the Team System Vista, because it can be considered for structure of third-party programs.

  Look for updates after that.

  Hope this information is useful.

  This problem may be caused by third-party security programs such as firewalls and antivirus software. You can disable or remove to check the issue.

  From: Microsoft Answers Support Engineer
  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  TaurArian [MVP] 2005-2011 - Update Services

• Unable to run the check disk due to having to restore the system

  When you start the system, it shows that disk needs the consistency check, but then it shows that the drive can be controlled due to the recent installation so system restore first. Although, when you try to restore the system, it is said there are disk errors that should check and may need repair in which it said restart your computer for this. When the computer is retsarted, it shows that the drive needs verification but still, says system needs to restore. So I can't run a check disk or restore the system. Help, please!

  Hi mustakimahmed,

  Welcome to the Microsoft Community and thanks for posting the question. Looks like you are not able to start from desktop due to errors in the disk check and not able to perform the system restore too.

  Try these methods and check:

  Method 1: Run the check disk in windows recovery (winre) mode. Follow these steps:

  (a) open command prompt.

  (b) use the following procedures:

  To repair errors, locate bad sectors and recover readable information, at the command prompt, type chkdsk volume: / r, and then press ENTER.

  Note: If one or more files on the hard disk are open, you will receive the following message is displayed: cannot run Chkdsk because the volume is in use by another process. You want to schedule this volume to check the next time the system restarts? (Y/N)

  Type Y, and then press ENTER to schedule the disk check, and then restart your computer to start the disk check.

  Note: If bad sectors are found in the hard drive, then it could try to fix this particular sector. If you have any data on that, it can get lost.

  Method 2:

  If method 1 fails, because you are not able to perform the disk, or restoring the system check, you may need to contact the manufacturer of the hard drive to get help. As the drive that you are using may be corrupted.

  Hope this information helps. If you have any other questions feel free to respond and we would be happy to help.

• The disk check runs every time you start, but never completed

  Original title: Check Disk computer error... Need help please

  Hello

  my computer is unable to check the disk... I believe that my windows vista crashed and when I turn on my computer... it continues to try to check the disk, but it keeps going and it never ends.  Someone told me I could used a program of different control on different portable media disc such that a cd could solve this problem.

  What is the way to bet to find such a program? Microsoft expects to have a disk of audit program which can be downloaded, or can you recommend something else?

  Thank you very much for your time and help

  Hello

  Make sure that you have the correct CD/DVD as first in the boot order in the BIOS. Do not forget
  to set again when finished.

  Check with HP support.

  -----------------------------------------

  If this does not help, it looks like you have a hardware problem.

  If the drive has completely failed you "might" be able to recover your data.

  You can also save the data and re-install Windows 7. The hard drive can be put in another
  computer as a 2nd drive (the best) or in an external USB enclosure. Either allows you to copy data
  for removable media such as CD, DVD or other USB drives. Of course, there are professional
  recovery
  services which are usually expensive - check with your local computer store and HP (one who
  his own internal service and not of leeks and display a Best Buy or other stores).

  Or you can use a boot Ubuntu CD to back up data.

  Use Ubuntu Live CD to backup files from your Windows computer dead
  http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computer

  I hope this helps.

• Power on VM for the error "unable to open the disc.

  I'm getting snapshot of the virtual machine before increasing the size of the drive with the following command

  vmkfstools x < new disk size > < path of the VMDK file >

  After the above command successfully. I try to open the virtual machine. I got the error "Unable to open the disk" check the status of the size of the drive through VMware infrastructure with the help of the item. Size of the disk was always the same, I increased it manually and switch on the VM, I get error that is attached in this post again.

  Please help how can solve this problem

  I suggest you read - http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1015180.

  From my understanding, you have increased the size of the disk of the child, not the parent disk. Remove the snapshot and do what you've done before. If you want to save the parent vmdk file, it Clone. Hope this picture below will help you better understand;

  

  Thank you

  Ganesh

• Installed Windows 7 on my HP Compaq nw8440 but unable to find the drivers that only Vista drivers are ther

  I just install Window 7 Home Basic Edition as final Version was my HP Compaq nw8440 too slow. After installation, I am unable to find the drivers and all drivers available for Windows Vista. No driver VGA, No Finger Print etc. And the Internet is also working slowly well my connection giving the same speed. Please help me

  You are the very welcome.

  I do not take up that simple...

  Try the driver windows 7 for her at the link below and you will need the W7 software protect tools because I do not think the Vista software works.  Ditto for the quick launch buttons.

  These drivers have been extracted from the 6910p who was the first series HP business notebook, support for windows 7 and the one that follows in the line after the nc6400 (the 14.1 "model of your screen).

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&swItem=ob-66699-1&prodTypeId=321957&prodSeriesId=1839152

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=3357377&prodNameId=3357378&swEnvOID=4053&swLang=13&taskId=135&swItem=ob-78740-1&mode=3

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=3357377&prodNameId=3357378&swEnvOID=4053&swLang=13&mode=2&taskId=135&swItem=ob-77198-1

  Paul