NB510 - 10 d: unable to launch the disk external multi PA3834E-1DV2

Similar Questions

• Unable to connect the WD external hard drive

  Original title: external drive wd drive 1 TB.

  I have a problem getting my computer to accept my drive external wd on d ' training. I have a basic dell computer vista laptop.

  They have been connected for more than a year. No problems with the previous backups. The last time I used my computer for offline family history, he was running slow and not answered, then it crashed. Can only access the files already on the c drive. During an attempt to access previous back ups, model said unidentified ports connection. All I can think to try... Tried to connect to another computer in the library. Not showing no sign that it is connected. How can I get the previous files and back ups, or has permanently hard-drive?

  I hope that I haven't lost 4 years of work?

  I am not connected to the internet at home and only go on the net to my library

  Hi John,

  Thanks for the post. I understand that you are unable to connect the WD external drive.

  I imagine the inconvenience that you are experiencing. I will definitely help you with this.

  To help you suggest several steps to solve the problem, I would appreciate it if you could answer the following questions:

  1. you receive an error code or message?

  2. have you made any recent hardware or exchange of software on your computer before the show?

  3 have you tried to connect the external hard drive on another USB port?

  Please follow the methods and mark the question below:

  Method 1:

  I suggest you to run the Microsoft Fix It from the link below.

  Hardware devices do not work or are not detected in Windows:

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2:

  Uninstall and reinstall the USB drivers.

  You can check after uninstalling and reinstalling USB drivers if you are able to connect. You can disconnect all USB devices and then perform the following steps:

  a. Click Start and then click Control Panel.

  b. click System and Maintenance, click System and then click on Device Manager.

  Note: If the control panel is in Classic view, double-click System, and then click Device Manager.

  If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  c. in the Device Manager, double-click to expand the "USB Bus controllers", right click on the controller host, click "Uninstall" and click "OK".

  Check that if at all, there is an exclamation point on the pilot, it suggests problems with the installed driver.

  d. Repeat step 2 to uninstall all items under 'USB Bus controllers'.

  Then, restart your computer and Windows will automatically reinstall all USB controllers.

  Note: Connect USB devices to the computer once the drivers of conflict are uninstalled, and once the computer is restarted.

  If you are still having the same problem then you can check the device USB drivers updated using windows update.

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 3:

  WD external drive is not recognized or detected in Windows XP after installation and use

  http://wdc.custhelp.com/app/answers/detail/A_ID/1695/p/228/session/L3RpbWUvMTM1MDQzMTYwNy9zaWQvQ0NTdVFVOGw%3D

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

• Unable to launch the live messenger window "application failed to start because its side by side configuration is incorrect."

  Unable to launch window live messenger on Windows vista. The error message is "the application failed to start because its side by side configuration is incorrect. See application for more details event".

  Hello

  they will help you with your questions/problems Messenger when repost you the link below in the Messenger forums

  http://windowslivehelp.com/product.aspx?ProductID=2

• Unable to launch the App with DONKEY

  I was unable to launch an application that uses a native extension. Everything compiles without error, but when I go to launch the application that closes before either one has started. That left me unable to even to debug the application.

  I have removed all references to the extension of the code, but am still group the .swc and .ane files (as well as a reference in the - app.xml). Does anyone have any ideas what can cause this behavior?

  By creating your DONKEY, under QCC Linker/library, you have added for all configurations of AirStub? Under the side AS3 you have arguments "- swf - version 13" added to your compiler?

• trying to create an ESXi data store on the local drive.  Configuring the host error: unable to update the disk partition information

  I'm a newbie on ESXi and don't know what it takes to get ESXi correctly partition my drive SATA 500 correctly.

  I will implement a laboratory unit to carry out tests for ESXi and ESXi is not quite correctly the disk partitioning or do not see a good partition in order to create a data store.

  This system was able to correctly identify and configure a data store on a small 80 GB seagate SATA disk, however, this isn't quite enough storage so I swapped the hard drive and tried to re - install ESXi on the new hd.

  I use a USB boot ESXi since and it is launched and configures the card intel pro1000 pci ethernet correctly.  also correctly the id of the cpu and memory.  everything seems fine and he is even able to see the hard drive.

  Here are some screenshots of the process that I go through to make my data store...

  on this photo-sous the column titled 'available' is 'none', also said, under the title 'san identifier' he said 'not applicable' - I guess that's not quite right?

  

  

  

  

  and disappointment - failure?

  

  I tried to go into the bios if there are some settings I need to do to get this hard drive set up... I don't understand enough about ESXi to find out why the drive is not found and configured correctly.  is this a bios problem w / my system or a problem of ESXi?

  pls help!

  You have generally not, but it might be interesting to start with something like a Linux live CD and then using gparted or other to wipe all the top partition information.

• Unable to use the Disk Defragmenter tool in Windows XP

  Original title: I use windows xp why used my computer open the disk defragmentation

  If I try to open the disk defrag it says the file isint there.

  Hi Gabrella,

  I'm glad to know that you've posted queries in Microsoft communities.

  According to the description, it looks like you aren't able to open the disk defragmentation in Windows XP.

  I have a couple of steps that should help you with this problem.

  Method 1:

  Try the fixit and the steps mentioned in this link and check.

  http://support.Microsoft.com/kb/314848

  Method 2:

  There are several reasons why the built-in defragmentation may not work correctly:

  Step 1. The disk is too full (you need at least 15% free space, sometimes 20%). Solution: Delete files unnecessary and programs until you have more than 20% free space.

  Step 2.

  The disc is damaged and must be repaired. Solution:

  a. open "My computer" and right-click on the drive that you want to disable frag.
  b. Select 'Properties' and click on 'tools '.
  c. Select "Check now" to check the drive for errors.
  d. Select the two options and click on 'start '.

  (This can take time and can restart the PC so that it can do the check at boot time. Be patient and let it complete).

  Step 3. There may be malware on the PC
  Solution - run the Antivirus and Antispyware scans (can take a long time if ever made. Be patient):

  Viruses can cause these problems. Scan your computer for the Microsoft Security Scanner, which allows to get rid of viruses, spyware and software malware.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  Note: The Microsoft Safety Scanner expire after 10 days from the date of installation.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Step 4. If still no luck, try disabling the screen saver when you run Disk Defrag (you should very well leave the system only when running the built-in defragmentation utility).

  Step 5. If still no go, try to run the defragmenter in Mode without failure. If she runs, something interferes with it in standard mode and stalking the interference may not be easy. Note: Some versions of Win 7 disable the ability to run the built defragmentation tool in safe mode. If disabled, it will say when you try to start it in safe mode.

  Step 6. Disk Defragmenter is no longer on the system or is damaged while it needs a re - install. Solution: Reinstall the built-in function.

  There are several ways to re - install the built-in defragmentation tool

  A:
  a. open the "Start" menu.and click run.
  b. type '% Windir%\Inf'

  c. in the window that opens, find the file named «dfrg.inf»
  d. right-click on "dfrg.inf" and "install".

  B:
  a. go into "start > run" on your computer.
  b. Type "rundll32.exe setupapi, InstallHinfSection DefaultInstall 132% windir%\inf\dfrg.inf" and press "Enter."
  3. click 'OK' to make the program automatically reinstall itself.

  C:
  a. go to start > all programs > Accessories > right click on command prompt > select 'run as administrator '.
  b. at the command prompt, type "regsvr32 dfrgsnap.dll" and press "enter."
  c. type 'regsvr32 dfrgui.dll' and press 'Enter '. This will reinstall the missing files to Defrag.

  Keep us updated on the status of the issue. For any help about Windows, you can still post on the Microsoft Community.

• Unable to schedule the disk, always set to 'never' Defragmenter in Vista

  When I call the Disk Defragmenter screen still reads that my next scheduled time is 'never '.  even if I reset the calendar at a specific time, when I close and call it back up the next scheduled time is again back to 'never', what is wrong?

  There are several reasons why the built-in function may not work correctly:
   
  0. it is malware on the system. Solution: Run an anti-virus control and also a spyware check.
   
  1. the disk is too full (you need at least 15% free space, sometimes 20%). Solution: Delete files unnecessary and programs until you have more than 20% free space.
   
  2. the disc is damaged and must be repaired. Solution:
   
  a.Open "My computer" and right click the drive that you want to disable frag.
  b. Select 'Properties' and click on 'tools '.
  c. Select "Check now" to check the drive for errors.
  d. Select the two options and click on 'start '.
   
  (This can take time and can restart the PC so that it can do the check at boot time. Be patient and let it complete).
   
  3. Disk Defragmenter can be altered, needing a system restore to fix it. Solution:
   
  a. start - all programs - Accessories - System Tools - System Restore (click here to open);
  b. Select a good restore point before you start having problems with Disk Defragmenter.
  c. start the restore process and let it finish. (Name the descriptive restore as "Repair of Defrag" operation).
   
  4. There are other programs that run the Defragmenter interruption integrated. Solution:

  a. close all running programs.

  b. If you think there may be some programs that run in the background.

  c. press Ctrl + Alt + Delete and

  d. Select "start Task Manager".

  e. under the 'Applications' tab, you will find a list of all running applications - you can close these by selecting "end task."
   
  5. If still no luck, try disabling the screen saver when you run Disk Defrag (you should very well leave the system only when running the built-in defragmentation utility).
   
  6. If still no go, try to run the defragmenter in Mode without failure. If she runs, something interferes with her and stalking interference may not be easy. Note: Some versins of Win 7 disable the ability to run the Defragmenter built-in in safe mode. If disabled, it will say when you try to start it in safe mode.
   
  7 Disk Defragmenter may no longer be on the system or is damaged while it needs a re - install. Solution:
   
  a. open the menu 'start '.
  b. type '% Windir%\Inf' in the 'Search' box and press 'Enter '.
  c. in the window that opens, find the file named "dfrg.inf.
  d. right-click on "dfrg.inf" and "install". (Note: apparently the specified file is not present on some versions of Win 7 - go to step 8).

  8. most of the problems will be solved by #6 above, but if not, and if your windows installation is otherwise working well, you should consider to download a free trial of a Defrag tool commercial rather than drastic measures to restore the perfect bed-s. Third-party programs are more robust and many work in the background, so you can use your PC during defragmentation.
   
  Most third party programs offer a fully functional free trial version (better ones are for 30 days). Install one of them allows you to disable built-in and if you decide to uninstall, removal will replace the built-in function, repaired several times in the process: it's worth a try...
   
  Here's a recent Top 10 comments side-by-side comparison of the best available defragmentation programs:
   
  http://Disk-Defragmenter-software-review.TopTenReviews.com/ 
   
  The gold medal is the only defrag of program that prevents the fragmentation (see the reiew).
   
  Why is it good to prevent fragmentation?

  Basically, it significantly increases life expectancy of your hard drive (especially since you don't have to leave the system on all night - a much 'greener' agricultural practice), not to mention it also increases the performance of the system.

  Find out what the review has to say on this.

  Good luck to you!
   
  Bill R TechSpec

  PS: If still no go, repair may involve editing the registry or repair installation of windows and possibly re - install windows itself. These aren't simple solutions. If so, indicate if they can be provided.

• Try installing ubantu OS on Dell R220 server - unable to launch the RAID configuration wizard

  I ubantu 14.04.3 Server OS on a DVD disc that is inserted in the R220 Dell server. I am trying to install the OS, but it does nothing when I go through the OS deployment. Server just restarts and crosses the start pages.

  In addition,

  (1) should I RAID to install this OS?

  (2) if so, how to install the RAID controller? It says 'Cannot launch the wizard of Configuration RAID' when I go to set it up.  I have SAS - RAID_Driver_H9W18_WN32_6.802.19.0_A05 on a usb key connected to the server, but I can't understand how to install it.

  Thanks for any help.

  Check the page of the inventory of the material in the lifecycle controller.

• Unable to launch the Device Manager Simulator

  My system like environment:

  13.04 Ubuntu

  Java 7

  inter i3 4 GB

  VMPlayer 6

  After installation the QNX Momentics IDE, I use Device manager download the sdk and Simulator.

  But I can't launch the Simulator. Nothing happen when I click on the launch button in the Device Manager.

  Hello

  Unless you redefine the paths by default during installation, the Simulator will be located in the base directory under the folder named "bbndk" with all the SDKs BB10 and IDE files. (#1 below screenshot)

  After you download the Simualtor & VMware for linux:

  1 - Open VMware and click Open Virtual Machine

  2 - Go to the folder where the BB10 to add Simulator located in select it [in the./home/bbndk/]. VMX file

  3. now select the simualtor you want to start in the left menu in VMware and click 'play Virtual Machine'

  

  

  

  Hope this helps.

  Thank you

  Kareem.

• Help-ERROR: application failed to start properly (0xc000001d).   Unable to launch the Premiere Pro

  Failed to launch the Premiere Pro. Windows 7 Ultimate sp1, processor AMD Phenom 6, 12 GB of ram, nVidia GTX 470, etc..  Tried of Premiere Pro uninstalling and reinstalling. Repair attempted on MSFT C++ + redistributable Visual Studio (filename: vcredist_x64) tried as an administrator. Etc etc...

  Hi JBWW,.

  For a fix, update for first Pro CC 2015 (9.2).

  Thank you

  Kevin

• Unable to launch the Client Application-vCO and strange error - "exception on Hibernate JDBC data access...". "

  Hello

  We have an integrated vCO 5.5.1 installation with vCAC 6.0.1. The installation worked very well. Recently, we encountered a problem where we were not able to run that any associated workflow vCAC. The following error is thrown " " "JDBC Hibernate data access exception: SQLException for SQL [?]; State SQL [null]; error code [0]; Cannot release the connection; "the nested exception is org.hibernate.exception.GenericJDBCException: cannot release the connection in vCO. Do not know what is happening with the vCO. Can someone help me on this? It's urgent!

  
  

  To resolve this problem, all plug-ins have been recharged and services were restarted. That has not helped.

  There is another issue that is to appear after that. We cannot launch the vCO Client. Fig. 1

  We are not able to access the following URL: https://<vCO-IP-Address>: 8281 Fig. 2

  We are able to access the configuration of the vCO page (https://<vCO-IP-Address>: 8283) and the application of the vCO page (https://<vCO-IP-Address>: 5480)

  Your help would be appreciated. Thank you.

  -SK

  Not many details have been given to us. I just resolution. In the Configuration of the vCO page, under the network tab fair value 0.0.0.0 IP address and restart the Server Configurator vCO. Login back to the Configuration of the vCO page and restart the service. It worked like a charm! It is the resolution for the vCO is not opening in port 8281. Once this is done, even the vCO Client began to open.

  Come to the JDBC error, as soon as this problem has been resolved, did not appear the JDBC error. So, I'm not sure about the exact resolution for this.

  -SK

• Unable to launch the browser

  Can someone help me fix this, I'm not able to launch the browser while trying to save EBS using openscript. His watch the error such that it is impossible to get a connection to the browser helper after 15 seconds.
  Please suggest how to solve this problem.
  
  Thanks in advance

  Hello

  Please open Internet Explore.
  Go to view-> toolbars and see if Oracle.OATS.OpenScript.IEToolBar.OpenScriptToolBar is enabled. If it is not checked so please check and then try to run and see if its working.
  If its checked, then please uncheck and then check it in again, and then try to run.

  Kind regards
  Rajesh

• Unable to launch the first Pro CC

  Hi, I downloaded creative cloud and Premiere Pro.

  At the launch of Premiere Pro, it happens to 'ImporterQuicktime.prm '.

  Then I get an error message: "Premiere Pro could not find capable video game modules.

  I signed in and out of the CC, updated graphics drivers and tried running as administrator.

  It worked fine with CS6.

  What to do next? I hope to go to CC on 3 other offices edit - if I need to see a running in all first!

  System specifications:

  Windows 7 Professional

  Intel core i7 - 3930K @ 3.20 GHz processor

  32 GB of ram

  NVIDIA GeForce GTX GeForce driver 320.18 Ti 660

  Following comments on other threads, I changed the compatibility mode for Vista, and am now able to launch the program.

  Is this likely to give me grief later?

  Thank you very much.

• Unable to launch the jar in the dist folder

  Hello everyone.
  
  I use Netbeans 7.1, javafx 2.02. I have a small JavaFX application, software running very well from Netbeans IDE, but when I tried to launch it by double clicking on the jar directly, I "JavaFx Launcher error, exception during execution of application".
  
  Need advice, this topic is probably more on the way to deploy an application developed for JavaFX
  1 is it because I'm not supposed to launch the program directly and need some initial settings before I am allowed to do?
  2. how to get error more detail on what went wrong
  3. how to effectively deploy my application
  
  Thanks in advance.

  The problem with the last nightly build. I hate this when coding environment is buggy :/

• Cannot recognize the disk external Windows bootable

  Then I made a disk external drive bootable (SeaGate Backup more 1 TB), such as specified in How to run the Boot Camp on external drive?

  Everything worked perfectly in cmd on my virtual Windows but when I reboot mac and hold option it gives me only the option to start in Macintosh HD.  No hard recovery or Windows bootable external drive.

  When I open the boot on my Mac drive, it gives me the opportunity to put my boot drive by default as the external to Windows without title or my Macintosh HD hard drive, but when I select windows as my default and reboot, it starts with a black screen that says "no boot device - insert the boot device and press a key.

  Is this a problem with my external hard drive formatting or a problem with the start on Mac?

  Others may have a more informed response, but

  I think that there are some drivers that need to load for the computer to recognize an external drive

  The situation may be different if you have BootCamp installed on the native player