Unable to start listener Apex

Similar Questions

• Unable to start Listener on multihomed NT Installation

  Hello
  
  I recently did an installation of 10g (10.2.0.4) on Windows Server 2003 to a new Test environment where I had to create multiple homes. In the current situation, there are 3 houses configured with ASM. When I start the server, listeners associated with home DB_1 & DB_3 start automatically, but DB_2 does not start. When I change the variable Oracle_SID and ORACLE_HOME to point at the House of DB_2 and try to start the listener, I get this error:
  
  C:\ > LSNRCTL STATUS
  
  LSNRCTL for 32-bit Windows: release 10.2.0.4.0 - Production on February 20, 2009 15:36:19
  
  Copyright (c) 1991, 2007, Oracle.  All rights reserved.
  
  Message not found 1053; No product message file = NETWORK, facility = TNSTNS-12557: Message not found; 12557 No product message file = NETWORK, installation = TNS TNS-12560: Message not found; 12560 No product message file = NETWORK, installation = TNS
  TNS-00527: Message not found 527; No product message file = NETWORK, installation = TNS
  
  How to start the listener instance DB_2! I would need to add another 4 houses in addition after this issue is resolved.
  
  Thanks in advance
  
  PS: MY DB_2 House configuring the listener-
  
  SID_LIST_LISTENER =
  + (SID_LIST = +
  + (SID_DESC = +
  + (SID_NAME = PLSExtProc) +.
  + (ORACLE_HOME = C:\oracle\product\10.2.0\db_2)+
  + (= Extproc program) +.
  +)+
  +)+
  
  LISTENER =
  + (DESCRIPTION_LIST = +
  + (DESCRIPTION = +
  + (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC2)) +.
  + (ADDRESS = (PROTOCOL = TCP (PORT = 1522))(HOST = oraserver)) +.
  +)+
  +)+

  You do not have many listeners.
  Several headphones go listener.ora (ONE) 1.
  You have multiple listener.ora.
  You are just a MESS. as multiple listener.ora does NOT work, ANY platform!

  You're on your own.

  -----
  Sybrand Bakker
  Senior Oracle DBA

• Problems installing listener apex 2.0.5 in Tomcat 7.0.32

  Hi all, hope someone can help me with this problem.

  Oracle DB: 11gR 2

  Apex version: 4.2.0

  Tomcat version: 7.0.32 on linux

  I have problems to install listener apex 2.0.5 in Tomcat 7.0.32

  I followed the step by step installation instructions, I configured the Auditor in accordance with the instructions, once configured I deployed the listener in Tomcat as the manual says, a t access with the browser time (https://cyaprod03:8443 / apex) I get the following error: "this installation has not been configured yet"

  
  In the catalina.out file see this: DB No. found for connection: / apex /.

  SERIOUS: no pool not found for https://cyaprod03:8443 / apex /

  In this Tomcat, I installed the 1.1.4listener and access the same basis that I'll put up the 2.0.5 version and it works without any problem

  
  

  Default.Xml
  

  <? XML version = "1.0" encoding = "UTF-8" standalone = 'no '? >

  <! DOCTYPE SYSTEM property "http://java.sun.com/dtd/properties.dtd" > ""

  Properties of <>

  < comment > saved on Tue Feb 18 14:39:24 CST 2014 < / comment >

  < key "cache.caching entry" = > false < / entry >

  < key = "cache.directory entry" > / tmp/apex/cache < / entry >

  < key = "cache.duration entry" > days < / entry >

  < key = "enter cache.expiration" > 7 < / entry >

  < key = "enter cache.maxEntries" > 500 < / entry >

  < key = "enter cache.monitorInterval" 60 > < / entry >

  < key = "cache.procedureNameList" / entry >

  < key = "cache.type entry" > lru < / entry >

  < key = "db.hostname entry" > cyaprod01 < / entry >

  < key = "db.password entry" > @05AD590B48DE4DDAA1FF3B4CE431A7DADA546740A15C9F9232090DC2C5CF28AAF5 < / entry >

  < key = "enter db.port" > 1521 < / entry >

  < key = "db.sid entry" > ORCL < / entry >

  < key "debug.debugger entry" = > false < / entry >

  < key "debug.printDebugToScreen entry" = > false < / entry >

  < key "error.keepErrorMessages entry" = > true < / entry >

  < key = "enter error.maxEntries" > 50 < / entry >

  < enter key = "jdbc. DriverType"> thin < / entry >

  < enter key = "jdbc. InactivityTimeout"1800 > < / entry >

  < enter key = "jdbc. InitialLimit' > 3 < / entry >

  < enter key = "jdbc. MaxConnectionReuseCount"> 1000 < / entry >

  < enter key = "jdbc. MaxLimit' 10 > < / entry >

  < enter key = "jdbc. MaxStatementsLimit' 10 > < / entry >

  < enter key = "jdbc. MinLimit"> 1 < / entry >

  < key = "enter jdbc.statementTimeout" > 900 < / entry >

  < key "log.logging entry" = > false < / entry >

  < key = "enter log.maxEntries" > 50 < / entry >

  < key = "misc.compress" / entry >

  < key = "misc.defaultPage entry" > apex < / entry >

  < key "security.disableDefaultExclusionList entry" = > false < / entry >

  < key = "enter security.maxEntries" > 2000 < / entry >

  < / properties >

  Saludos

  I think the listener APEX for Tomcat, at least, installation instructions are pretty poor.

  What worked for me:

  1. decide where the listener must find the configuration files:

  java-jar ords.war "c:\My STUFF\conf APEX" configdir

  This changes the web.xml file in the ords.war file to get a reference to the expected configuration directory.

  2. perform the standard installation:

  java-jar ords.war of installation

  This creates a few xml configuration files, etc. in a place where he mentions at the start of the installation - it does not change the war itself file.

  3 deploy the ords.war in webapps

  This creates the ADR structure directories above webapps, including our modified web.xml. It also creates a directory structure starting with "ADR" in the location that we have specified for the configuration directory.

  You must now copy the files in step 2 configuration in the configuration directory created by step 3 - you will spot the similarity in the directory structures and Appendix A of the installation guide explains what that is the structure and the files do.

  You should now be able to connect to APEX, the location of the "ADR" on Tomcat.

  Good luck!

• Manually configure the listener apex via command line

  I would like to be able to configure the listener apex via the command line.
  Is there an api or method to achieve this?
  
  Is it possible to take an apex-config. XML as a template and make changes to this environment and place it in the config.dir directory
  According to me, placing a! in front of the clear text password cryptera apex listener reboot?
  
  Is the method of model above a taken way in charge of the configuration of the apex listener script languages?

  I set the value of config.dir for /apex_lsnr
  This will search the apex - config.xml in the directory above or it will search the XML in /apex_lsnr/apex?

  +/apex_lsnr + would be option 1 - who doesn'work currently.

  ++ refers to the 'context' you have deployed your APEX listener, so if you used the default value (apex) this would actually
  +/apex_lsnr/apex +.

  -Online cp apex - config.xml $DOMAIN_HOME/apex_lsnr/apex

  Note that APEX auditor records the location of the apex - config.xml, he uses actually started. If it comes to the temporary location (default), he found nothing in your configured directory.

  -Udo

• Listener apex load

  Hello
  
  I have a few questions about a stand-alone installation listener Apex:
  
  1. how to measure the charge on the earpiece of the Apex? There all the tools available?
  2. is there a value any by adding another instance of listener of Apex for the same database? How do I know whether the performance will be improved and if so how can we know when it will be advantageous to add another?
  3. we would like to have a process in place to receive an alert when the listener of the Apex is screw up. Any advice how to and what are the parameters that we should look at?
  
  Thank you
  Sue
  
  Published by: Sue on January 26, 2012 13:09

  Hi Sue,

  A month ago that while we had not, we increased the parameter 10 to 30 MaxLimit and since then disconnects.

  It seems that you really had an overload somewhere. You probably have an application with some queries of long term, maybe some slow because the database has been overloaded. Of course, you can increase the number of connections available at the base so willing to access all users will be able to connect. But generally, they will not have fun as response time will be bad, and what can be even more painful - they can worsen, because their requests will cause the database get overloaded even more.

  Is there guidance on the recommended value for MaxLimit [...]

  The MaxLimit must be chosen according to the number of concurrent users that you want to be able to serve. Usually, this should not be much more than the number of parallel threads that can manage your database. For example, I would not recommend 30 sessions for a database instance that has just a few threads of CPU to process them. Remember: If the database ends more quickly, you will get the session back to your pool for APEX listener, so the next user request will be able to use it.

  [...] or it depends on the environment and if so where I see?

  Somehow, it depends on your applications and end-user needs. You can take a look at the following numbers in listenerStatus:
  Time in milliseconds (mean and median) database Active applications Connections in the apex of the pool (active and available)
  The first is obvious: APEX auditor measures the time required claims it's in the database until they come back. If two values begin to climb quickly, your database is probably stressed out... Of course, it makes sense to give the listener to APEX go back now and then so it will start a calculation of costs.
  In addition to knowledge of the size of your pool of connections, the number of active requests and active connections in the pool gives you a hint of the current use and if you need more connections than the ones you always available (as appropriate). But again, you should consider the burden of database first to see if your database would be actually able to manage additional sessions, or if the addition of load by allowing more connections would make things worse.

  -Udo

• I'm unable to start Firefox. To get the message that it is already running. Cannot find my profile using '% APPDATA%\Mozilla\Firefox\Profiles| '. What should I do

  I'm unable to start Firefox. To get the message that it is already running. Cannot find my profile using '% APPDATA%\Mozilla\Firefox\Profiles| '. Restarting my computer did not help. Because I had this problem I also noticed that all my favorites that I had copied in Windows Internet Explorer also disappeared. I use Firefox as my main search engine and usually do not use Internet Explorer. I am running Windows 7 on my machine.

  Try this add on the profile folder

• Unable to start after you run the product recovery disc

  Hello

  My laptop was a dual boot with windows XP SP3 and ubuntu

  1. He was infected by the virus and when I tried to clean it I removed the wrong file "services.exe", whereas windows does not work good there

  2. when I tried to uninstall the windows update, I get the error following error: 1068: the dependency service or group could not start

  3. so today, I found the toshiba recovery disks, I run and it commpleted, but now am not able to start my laptop.

  4. when I try to re - install windiws xp I got the error below "couln can't find NTLDR.

  Guys, your help will be much appreciated

  Hello

  > I run and it filled, but now am unable to start my laptop

  Are you sure that installation completed successfully? Looks like the damaged MBR or cannot be attributed

• Satellite P15-S420: unable to start Windows XP

  I hope that all makes sense... I'm unable to start after the start page of Windows XP. I think I have assumed that the computer turn off when there is no. The battery may have exhausted and when I plugged it back in and tried to start it would not.

  When the Windows start page is in place, it seems that HD works for awhile, but stops and goes no further. I am able to boot in safe mode and have tried to restore with no effect. When I click on Toshiba Manager of power supply in the control panel I get "Policy of NoteBook Load Fail" this could be a problem.

  What do you think???
  Oh, I have a Satellite P15-S420.

  Hello

  In my opinion, this power saver error message occurs because you started the laptop in safe mode. In this case, the OS doesn't use the Toshiba drivers that are required for the use of additional applications.
  You write about the restore procedure. Have you tried to install the laptop with the supplied restore CD? If this isn't the case, then try it.

• ERROR: Unable to start Bluetooth stack service

  I seldome use features wireless to my pc before, but now that I have the wireless router I frequelty use it. Usually, I turn on the wireless switch and turned off to save the battery. I noticed every time I turn on the radio, after a few minutes, that an error message is displayed:

  BTTray

  ERROR: Unable to start Bluetooth stack service

  I don't know if what is wrong with my laptop. Please if anyone can tell me if what is wrong with this thing. Thank you very much!

  HP pavilion dv6820ee

  OS: Windows Vista editions Home premium.

  Message edited by xXxonins on 12/22/2008 05:27

  Access your product download page and reinstall the software for bluetooth under networks:

  http://h10025.www1.HP.com/ewfrf/wc/softwareList?OS=2093 & LC = on & DLC = in & CC = US & Product = 3716846 & lang = in

  then, under network connections in the network and sharing window - see if you have a bluetooth adapter that is listed.  If you do not use bluetooth, you can turn it off or you should be able to set it up properly.

  If fails it then in Control Panel, under administrative tools, Services - locate service BTtray and disable it.

  HTH

• Satellite P200HD-1DV: the error event to the startup-unable to start a DCOM Server

  Whenever I restart it is extremely slow and in my opinion, caused by the following 2 errors that appear in the system as event ID 10000 event log:

  Unable to start a DCOM Server: {7160A13D-73DA-4CEA-95B9-37356478588A}. Error: '2 '.
  Happened at the start of this command:
  C:\windows\system32\igfxext.exe-integration

  Unable to start a DCOM Server: {078AEF33-C48A-49F7-AFF3-A0EE810BFE7C}. Error: '2 '.
  Happened at the start of this command:
  C:\windows\system32\igfxsrvc.exe-integration

  I think they are Intel drivers, but have failed to find a cure for this problem.
  Other than a real slow start it seems no problem.
  Am that I the only one having this problem and everyone know the cure?

  So, you understand where the problem is but why didn t you have installed graphic drivers intel one another? I mean, you know where is the problem and you can correct it.

  Otherwise, if a reinstallation does not help, it would be better to completely recover your system to eliminate the problem.

  Greetings

• Unable to start bootcamp after partitioning El Capitan

  Lonely HI T,

  I recently partitioned the drive where is installed OSX El Capitan. Now, to press the Option key at startup to the top, I can't select my Bootcamp partition to boot.

  Here's the info re: my product:

  Here is some information about: my volumes:

  • I have OSX installed on a partition 'Macintosh SSD' a 500 GB SSD
  • The files are on a 'Macintosh HD' partition in a 1 TB HARD drive
  • I have Windows Bootcamp installed on a "SOLID" NTFS partition in the same 500GB SSD
  • and another NTFS partition for Windows files "LIQUID" in the same 1 TB HARD drive
  • I also have a new partition (which lead to my problem) "ScratchDisk' in the same 500GB SSD

  Also very "SOLID" and "LIQUID" NTFS partitions are currently read-only that is ' owners: disabled "in disk utility after creating a new partition"ScratchDisk"for Photoshop in the same 500GB SSD and SOLID will not show up to start up after pressing the button 'Option '.

  I already had Tuxera NTFS installed but uninstalled.

  Below you will find the following information:

  • diskutil list
  • Cs diskutil list
  • sudo TPG - vv - r see the/dev/disk0
  • sudo fdisk/dev/disk0

  Thank you for the patience and kindness in advance,

  CESCO

  Last login: Tuesday, February 2, 23:22:10 on ttys000

  Cescos-iMac: ~ list of the Cesco$ diskutil

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 500,1 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_HFS Macintosh 250,0 disk0s2 GB SSD

  3: disk0s3 Apple_Boot Recovery 650.0 MB HD

  4: disk0s4 Apple_HFS ScratchDisk 99.2 GB

  5: Microsoft data base SOLID 150,0 GB disk0s5

  / dev/disk1 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * 1.0 TB disk1

  1: EFI EFI 209.7 MB disk1s1

  2: Apple_HFS Macintosh HD 899,2 GB disk1s2

  3: Apple_HFS Recovery HD 650.0 MB disk1s3

  4: Microsoft data base LIQUID 100.0 GB disk1s4

  / dev/disk3 (external, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: FDisk_partition_scheme * GB 500,1 DIS3

  1: Windows_NTFS GB Seagate Expansion Drive 500.1 disk3s1

  Cescos-iMac: ~ Cesco$

  Cescos-iMac: ~ list of cs Cesco$ diskutil

  No logical volume group CoreStorage found

  Cescos-iMac: ~ Cesco$

  Cescos-iMac: ~ Cesco$ sudo TPG - vv - r show/dev/disk0

  Password:

  See the TPG: / dev/disk0: mediasize = 500107862016; SectorSize = 512; blocks = 976773168

  See the TPG: / dev/disk0: PMBR to sector 0

  See the TPG: / dev/disk0: Pri GPT to sector 1

  See the TPG: / dev/disk0: GPT Sec at sector 976773167

  start index size summary

  0 1 PMBR

  1 1 Pri GPT header

  2 32 table GPT Pri

  34 6

  40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B

  409640 488188328 2 part TPG - 48465300-0000-11AA-AA11-00306543ECAC

  488597968 1269536 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC

  489867504 193675024 4 part TPG - 48465300-0000-11AA-AA11-00306543ECAC

  683542528 262144

  683804672 292968448 5 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7

  976773120 15

  976773135 32 table dry GPT

  976773167 1 dry GPT header

  Cescos-iMac: ~ Cesco$

  Cescos-iMac: ~ Cesco$ sudo fdisk/dev/disk0

  Disk: geometry / dev/disk0: 60801/255/63 [976773168 sectors]

  Signature: 0xAA55

  From end

  #: cyl hd s - cyl hd s id [Start - size]

  ------------------------------------------------------------------------

  1: EA 1023 254 63 - 1023 254 63 [1-976773167]

  02:00 0 0 0-0 0 0 [0-0] unused

  03:00 0 0 0-0 0 0 [0-0] unused

  04:00 0 0 0-0 0 0 [0-0] unused

  Cescos-iMac: ~ Cesco$

  Re: Unable to start bootcamp after partitioning El Capitan

  Please after the release of

  sudo dd if = / dev/rdisk0s5 account = 1 2 >/dev/null | hexdump - C

  It will show you the first block of the SOLID wall.

• Error BTTray: Unable to start Bluetooth Stack Service

  I have an Envy 17 3D (product number: LV045UA #ABA). Recently, shortly after startup, I get an error to the effect that there is a BTTray error as it is unable to start bluetooth stack service.

  I use a Bluetooth Logitech mouse and the mouse continues to work. Befire I started having error, periodically that the mouse could be suddenly disconnected and I must initiate a discovery of the mouse with the Bluetooth discovery mechanism.

  Usually after the rediscovery of the mouse, I would have no other episodes for several days with a new day evey bootup. The error is only a recent development, but the episodes of disconnecting long enough.

  I'm not even sure that the two are linked, and I watch inconsequential number BTTray. However, I want to solve this problem of BTTray error until something of consequence occurs.

  Kind regards

  S.M. Cohen

  Hello

  Please reinstall the driver for Bluetooth module and this problem will be solved.

• Windows is unable to start.

  Owner of a Pavilion wa694ua #aba little more than 2 years.  Windows is unable to start.  During windows Startup Manager, I receive a status of: 0xc000000f and info: start the selection has failed because the required device is inaccessible.  What to do next?  I have the recovery disks, but is not no longer works.

  Your hard drive may have failed and must be replaced. Enter the BIOS by typing/holding the F10 key immediately after switching on the laptop. Use Diagnostics to test your hard drive.

• answer me please! Unable to start? Bluetooth stack service! that means this popup

  I got NO help from anyone Thanks much all that you brains out there cannot get a response?

  From the other thread:

  Unable to start Bluetooth stack service? What is this and how do I get rid of him. printer works well. This service is useless.

  Hello! very annoyed with a popup that I said at the top left of the BTty yellow! mark in the middle of the box and the message unable to start Bluetooth stack service, I click OK and it goes away a while tried all my settings are unable to get rid of it. It started when I let a 2nd. or 3rd. part microsoft co. take possession of my pc to difficulty clutter & defragment only HELP get me to pay 149.99 at this time, very unhappy.

  Hi Patgariepy,

  What operating system is installed on the computer?

  You get this error if the drivers are not updated, or if the driver has been corrupted. I suggest measures are:

  Method 1: Bluetooth device driver update. Steps to update the device driver:

  a. click on start
  b. Select Control Panel
  c. Select system and maintenance
  d. click Device Manager (if you are prompted for an administrator password or a confirmation, type the password or provide confirmation.)
  e. in the Device Manager, look for the Blue tooth device
  f. click on the driver tab and then select Player update

  Link for reference: updating a hardware driver that is not working properly

  http://windowshelp.Microsoft.com/Windows/en-us/help/b3c6477e-1111-4B9F-A52A-fffdc51e9c901033.mspx

  Method 2: Uninstall the Bluetooth device, restart the computer and install the latest drivers.

  You can even check out the link below, which will set the Blue tooth device: point of Bluetooth in Control Panel on a Windows Vista SP2 does not work as expected when you click the http://support.microsoft.com/default.aspx/kb/960531elementNote: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article: back up the registry in Windows 7

  Keeps us up-to-date on the State of the question.

• Unable to start bluetooth stack service

  I can't not connact my phone to my laptop via bluetooth and get the following ERROR... UNABLE TO START BLUETOOTH STACK SERVICE.

  A large part of the obligation for any help.
  Thank you

  Hello

  Method 1.

  Try these steps and see if it works.
  Step 1: Start the Bluetooth service.
  a. Click Start, type services.msc and press to enter.
  b. in the list of components, double-click Bluetooth support Service.
  c. change the startup type to automatic and click on the Start button to start the service (verification of the d.       d.Dependencies of this service and make sure that they can also be programmed to automatic)
  e. click on apply and then click ok.

  Method 2: Bluetooth device driver update. Steps to update the device driver:

  a. click on start

  b. Select Control Panel

  c. Select system and maintenance

  d. click Device Manager (if you are prompted for an administrator password or a confirmation, type the password or provide confirmation.)

  e. in the Device Manager, look for the Blue tooth device

  f. click on the driver tab, click Update driver

  Link for reference: updating a hardware driver that is not working properly

  http://windowshelp.Microsoft.com/Windows/en-us/help/b3c6477e-1111-4B9F-A52A-fffdc51e9c901033.mspx