Unable to update complete

Similar Questions

• Unable to update Windows (error Code: Code 8004015)

  original title: unable to update Windows

  I run windows vista 32-bit, HP laptop, can provide details if necessary

  When I try to update windows (my last update was 3/25), the update fails to check for updates, it reads:

  An error occurred when the new updates for your computer.  Error (s) found: Code 80040154

  I tried it without real result on my own troubleshooting.

  In addition, I can't update Windows Defender, which signals that it cannot check the updates of definition with found error:
  Code 0 x 80244001.

  I can not also turns on the AVG identity protection as it times out when you try to configure.  I have performed analyses of the complete system with AVG, Malwarebytes and rootkits but with no infection research are, but I do not deny the possibility of having a hidden virus.

  It may be helpful to say that my laptop has had problems with blue screens lately, even these problems with the updates before began. I got mixed messages on the blue screen, errors of entry being the most common. I think there may be something wrong with one of my drivers, I sent my laptop in for repair earlier and it wouldn't surprise me if they did not work.  However, I did the repair of the tool without any result Windows driver.

  Finally, the system restore does not work on my system for some reason any and I do not have a backup disk.  Right now, I'm considering just buy windows 7 and all wiping.  My laptop is not really unusable, it's just embarrassing to have it down every day and not be able to update.

  Any advice would be appreciated.

  Hello

  (a) don't you make changes to the computer until the problem occurred?

  I suggest you to follow the steps below and check if it helps:

  Method 1: Try to reset the Windows Update components and check:

  http://support.Microsoft.com/kb/971058

  Method 2: Also try to clean boot and then try to install the update manually from the link below and check that if it helps, here is the link:

  Clean boot - http://support.microsoft.com/kb/929135

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  a. Click Start, type msconfig.exe in the start search box and press ENTER.
  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  b. on the general tab, click the Normal startup option and then click OK.
  c. When you are prompted to restart the computer, click on restart.

  Hope this information is useful.

• Unable to update applications through creative cloud... Help

  We are unable to update any application through the application of creative cloud. App CC uninstalled and reinstalled several times. Connected and back in several times. The request shows that there is no update available for applications when we know that there are updates.

  In addition, the option to update in the first is completely grayed out.  We installed the product with the help of a creative cloud Packager.  Would appreciate any help.

  Hi Matthew,

  Have you created a package via Creative conditioner cloud or someone else? You can also create a package update and deploy on all machines or ask who has deployed the software on your computer.

  -Pierre

• Why the iphone 4 is unable to update version? Latest version 7.1.2

  Why the iphone 4 is unable to update version? Latest version 7.1.2

  because the material is too slow

• iOS 10: unable to update the applications due to Conditions General timeout

  I updated my iPhone 6s to iOS 10 a couple of days and now seem to be unable to update applications. The issue seems to stem from a prompt to read and accept the new "Apple Media Services terms and Conditions." When I click the button to proceed with conditions, a new empty window appears and then things churning just until the request times out (see photos). The same thing happens when I click on "View the apple ID" in the app store or through settings, even if in this case the terms guest does not appear and it charges only up to the time limit. It seems to me that the problem lies in the redirection of the terms of apple. Anyone who has experienced this since the update or does anyone have advice?

  I already tried things:

  -force settings, closed and app store

  -restart the phone

  -disconnected and signed apple ID (this feature works in the app store and the parameters)

  -tested 'show apple ID them' on the phone to my wife (6 s on the same wifi network), successful but the phone still is iOS 9

  -tested "show the apple ID" via iTunes with my macbook, successful and I seem not to be invited to accept the new conditions

  Thank you!

  

  Post edited by: cstrand_apple
  Added pictures and corrected typos

  The issue seems to have resolved itself. The terms and conditions page is loaded and now updates are allowed. Just a temporary problem, I guess.

• Unable to update WatchOs 3

  Hi guys,.

  Since the official update is available for 3 WatchOs, I can't seem to do the update on my watch.

  I click on software update as you would, and it comes up with ' watch OS 3 - awaiting installation... ". »

  then click on install and enter my password,.

  THEN...

  It says "Unable to Install Update - an error has occurred in install the latest version of Watch OS on your Apple Watch".

  and just ask you to close the application.

  I updated my phone to iOS 10.

  Watch OS is currently in 2.2.1

  The phone and Apple Watch and iPhone are fully charged.

  Watch is on charge while I attempt it.

  I'm also on the wifi while I attempt it.

  Also, I tried to make a reset (when you hold the 2 buttons together) on the watch and the iPhone and STILL nothing!

  I don't really know why it does not work.

  I'm not a developer, so I have not installed betas, profiles or even jailbreaks. Just a standard user!

  SOMEONE PLEASE HELP! ....

  Thank you

  Swaad

  Hello iSwaad,

  Welcome to the communities of Apple Support!

  If you are unable to update watch OS 3, turn on the wireless router/modem to re-establish a connection to the internet.  Then follow the steps in the resource below.  I've highlighted the key here information.  Click on the link for more details.

  Update the software on your Apple Watch

  If you need help updating

  Try the following steps:

  1. Make sure your Apple Watch connects to its charger.
  2. Restart your Apple Watch. Hold down the side button until you see off the power, then drag the slider. To turn on your watch, press and hold the side button.
  3. Restart your iPhone matched. Press on and press and hold the sleep/wake button until the Red slider appears, and then drag the slider. To turn your iPhone, press and hold the sleep/wake button.
  4. Try to start updating again.

  If the update does not start, Open the Apple Watch app on your iPhone, tap on general > use > software update, and then delete the update file. After you delete the file, try to download and install new watch OS.

  Take care.

• Update iOS 9.3.5 failed on iPad. Now unable to update or restore to factory presets. "An unknown error has occurred (52).

  I tried to update my iPad for iOS 9.3.4 iOS 9.3.5 directly since the latest version of iTunes on Macbook Pro running the latest update of El Capitan. I tried the update of the iPad without iTunes, but he failed and showed the photo to connect to iTunes.

  The update failed to halfway through (don't remember the exact message) so I unplugged the iPad, restarted iTunes, and tried the update, but the update constantly fails with the message "an unknown error has occurred (52). I also tried via iTunes on my iMac running Yosemite, but has not as well.

  I did all the things listed here:

  https://support.Apple.com/en-us/HT201210

  The iPad was working fine before the update attempt.

  Is there than anything left to try? This iOS update broken my iPad?

  Have you tried to put the iPad into recovery mode?

  If you are unable to update or restore your iPhone, iPad or iPod touch - Apple supports

• can someone please help, unable to update or restore error-1

  can someone please help I'm unable to update or restore my iphone 5 c due to an error (- 1).

  It is usually a hardware error and you will need to get it repaired. You can also get the same message if the iPhone was jailbroken.

• My PC says that my version of Safari is no longer supported, but I'm unable to update

  My PC says that my version of Safari is no longer supported, but I'm unable to update.

  Apple dropped the version of Safari Windows after 5.1.7. You need spend browsers.

  (138603)

• Unable to update or buy apps, family message appears

  Rerecently when I tried to update an app, I got this message that says "there is a problem of billing with previous purchase a family member." Ask the family Organizer to update their billing information. We do not know what to do. My husband can download apps and updating, but I can't. I should mention that we were virgins iPhone until 2 weeks ago. We signed up for family and I are the beginning of the 90-day trial period.

  I don't know if they can help me at the Verizon (?) store

  Any suggestions?

  Betsy

  Hello there, Betsy!

  First of all, welcome to the iPhone family! Looks like you are unable to update your applications because of this message indicates that there was a billing issue. The following article offers some steps on how to solve the problems with payment in iTunes on your computer:

  Pay an outstanding balance on the iTunes Store

  If your payment method was declined, update your billing information. You may need to use a different payment method. When you update your billing information, do not forget to check these things:

  • Make sure that your name and address match the information on file with your financial institution.
  • Make sure that the payment account you are using is in the proper manner.

  If you use family sharing, your method of payment may be denied because there is a billing problem with a previous purchase to the account of a member of the family. The family organizer shall follow the steps described in this article to resolve the problem.

  You can't pay for unpaid orders on an iPhone, iPad or iPod touch.

  If there is a problem with a previous purchase, you will see a message when you connect to the iTunes Store or try to make a purchase.

  When you connect to the iTunes Store

  If you have an outstanding balance, you will see this message: "there is a problem of billing with a previous purchase. Please modify your billing information to fix the problem. »

  

  You can pay your balance by following these steps:

  1. Click on the message billing information. Change payment information screen.
     
  2. Update your payment information. You can use one of these payment methods.
  3. Click done. If your payment is declined, iTunes will warn you.

  When you try to make a purchase

  If you have an outstanding balance from a previous purchase, you will see this message: "there is a problem of billing with a previous purchase. Click purchase history to view and correct the problem. If you cancel you won't be able to buy until this billing issue has been resolved. »

  

  You can pay your balance by following these steps:

  1. Click purchase on the message history. You can see the outstanding balance on your purchase history. Your purchase history will display your most recent purchases first. To view the details of any purchase, click on the arrow to the left of the order date.
  
  
• Click Info or compensation of billing. If you do not store credit, you won't have the ability to click on pay.
  • If click you on pay, you can use your credit to pay your balance.
  • If you click on billing information, you can update your payment information. You can use one of these payment methods.
• Click done. If your payment is declined, iTunes will warn you.

Thank you for reaching out to the communities of Apple Support.

Kind regards.

• Windows 2008 Server: unable to update the password. the value provided for the new password does not respect length, complexity, or history of the field requirements

  Unable to update the password. the value provided for the new password does not respect length, complexity, or history of the field requirements

  Hello

  I suggest you to send your request in this forum for better support.
  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• due to the infection by the virus, I am unable to update windows and essential security. What is the solution permanently if I face this problem again

  Unable to update windows sp3 and security essential.mesage appears when try it to update.internet Explorer cannot open this page.i have to install a new copy

  When (date about) don't you install Microsoft Security Essentials (MSE)?

  What antivirus application was installed before you installed MSE, was your subscription always news, and in fact you uninstall it before installing MSE?

  A (another) Norton or McAfee application ever been installed on the computer (for example, a free trial version which is preinstalled when you bought it)?

  More...

  Support Microsoft Security Essentials forums
  http://social.answers.Microsoft.com/forums/en-us/category/MSE

  Can I install Microsoft Security Essentials [or any other anti-virus/anti-spyware application] to clean my already infected computer?
  http://social.answers.Microsoft.com/forums/en-us/msescan/thread/87058857-D181-4019-a723-efd9a49d9275

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• can I remove the patch uninstall program after Windows Update completed?

  can I remove the patch uninstall program after Windows Update completed?
  are the uninstall program is temporary file? or the update file?

  because my full HARD disk starting with the files

  can I remove the patch uninstall program after Windows Update completed?

  Only if you are sure that you will never need to uninstall the update of 100%.

  my full HARD disk starting with the files

  See this discussion archived instead-online http://aumha.net/viewtopic.php?f=62&t=33827

• Microsoft Security Essentials unable to update the definitions of spyware, error code 0 x 8000-4004

  Microsoft Security Essentials is unable to update the definitions of spyware, my computer is essentially unprotected right now.

  * original title - error code 0 x 8000-4004 (says that there is internet connectivity or network issue/no prlblem with my internet or connectivity *)

  Hello

  Try the steps listed in the links below and check, if this can help: install the latest Microsoft Security Essentials definition updates: http://www.microsoft.com/security/portal/Definitions/HowToMSE.aspx

  How to manually download the latest Microsoft Security Essentials definition updates: http://support.microsoft.com/kb/971606

  For more assistance, you can post your request in the Sub forum: http://answers.microsoft.com/enus/protect/forum

• Windows update update exceptional error 0x8DDD0001 & 80246008 unable to update 36

  Windows Update error exceptional 0x8DDD0001 & 80246008 unable to update 36!

  One thread will do, thank you.

  To avoid confusion and duplication of effort, please post a follow-up later all replies to your thread of origin-online http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_update/i-cannot-update-windows-showing-error-code/f4f79719-330f-49b5-b51b-839e712f0711