Unable to use its data plan after the update to 9.3.1 iPad2

Similar Questions

• Use of data cell after the upgrade to iOS 10.0.2 has increased dramatically

  Hello:

  I noticed a HUGE increase in mobile data usage by my phone (iPhone 6s) after the iOS to 10.0.2 update.    I had not changed anything since before the update.  A few days after my phone iOS update my more than double to 15 days prior to the cell data update!   I went under a GB to 2.2 GB for two days.  I am only allowed 2.5 GB of my company.   Assist of WiFi was interrupted. I am connected to a wifi most of the time, all day at the office and at home in the morning and in the evening.  I haven't changed my phone usage habits nor have I down loaded new applications.   I also did all the stuff reset once I downloaded the update as turning on and off, hold down home and appears on the sides until that little Apple.

  I looked in the cell parameters section and noticed a few things that consume more data:

  Facebook: I had disabled cell Facebook use.   However, there was a large amount of data used. I also, by habit, only check Facebook when I'm at a known wifi spot as the House or the office.   It was less than a MB before and near a GB of data in 2 days.

  YouTube: Idem, had turned off cell phones and only look at the House.

  Maps - never used but the use of data.

  e-mail-HUGE amount of data used.  Normal use for me. in the past, the amount of data has been a MB.  Now it's 65 MG in 2 days,

  Siri - I do not use Siri as in "Hey Siri" or by using voice commands.  I use it from time to time to the voice on texts.

  AccuWeather.  Even.

  It's just as much as the apps that I use, the rest is electronic mail and stuff systems.   I uninstalled nearly all applications except for the few that I need as my ticket train and planning aps and mail want to stop this.   I won't send any imessages anymore.

  Quite an experience of something like that?

  Yes! I have iPhone 6 - after that the update almost all my data is gone for the month! I do not have Wifi Assist on and I only use data when I'm home and can connect to Wifi!

  I see my iPhone to connect to my Wifi then bounce to the cellular network. I have no problem with my home wifi network. This problem also occurs in the work. In addition, the network at work requires the password to the network - I type in iPhone tells me it's the wrong password, and then it connects. Then it disconnects after 2 minutes.

  I tried to reset the Wifi feature. Help!

• Unable to access Citibank Online Banking after THE update to IE11.0.9600.16476

  After update of IE on my computer on windows 8, I lost access to my online banking with Citibank. It does not recognize my login type. Even if I see the letters entered into the login page, it will detect as if I haven't typed all the letters. No problem when I use CHROME or other computers by using an earlier version of IE. Citibank called and they of course could not understand it outside and i.e. blamed. They said they would look into this but three weeks have passed and no solution. Any recommendations on how to overcome this problem.

  The first step in troubleshooting is to clear browser cache/cookies.      

  * For the browser Internet Explorer & MSN Butterfly: simultaneously press CTRL + SHIFT + DELETE, and then click on remove
  For Google Chrome: simultaneously press CTRL + SHIFT + DELETE, and then click clear browsing data
  * For Firefox: press CTRL + SHIFT + DELETE, and then click clean now

  (other browsers are similar)

• Adobe Acrobat plug of keeps showing that is out of date, even after the update or reinstall.

  Other users have reported similar problems. My particular case: Running Firefox - date (42.0) - Windows 7 (as so far). Firefox has constantly watch the Adobe Acrobat Reader plug-in is not up-to-date. I tried to update and reinstalled Acrobat. I just had request Acrobat update which has been a success and also updated to Firefox. Firefox still has reports that Acrobat is obsolete. Firefox reports that the current add-on is 15.9.20069.28170, but clicking on update now button on the Add you check page contains links to a page of Adobe update with the version number 2015.009.20069. When I search (Google) for the latest version, I've reached a page that lists all versions, updates, etc.. The latest version is 2015.009.20069. According to the Panel, the version of Adobe Acrobat Reader is installed on the computer is 15.009.20077!

  As far as I can tell it's working properly, updated regularly. I don't know where the 28170 number comes from or why page Add on reports that Acrobat is out of date, unless the version update of the Acrobat Reader software is not actually update the Add On from Firefox portion.

  Any suggestion or comment?

  My suggestion is to ignore the information from the website of checker plugin and use the built-in functionality of Adobe to check updates. In your DC of Adobe Reader or Adobe Acrobat DC:

  Help menu > check for updates

  While the site checker plugin uses data provided by Adobe, there seems to be some discrepancies between the program and the version number of plugin that have not yet been resolved.

• Unable to connect to internet wireless after the update to vista windows or anti-virus program change

  I can update Windows Vista, but then I can't connect to the internet. This also happens whenever I have download a new antivirus program (different) on my system. Restore the system to the point until the changes are made fix the connection problem.

  Any help would be great.

  Thank you

  It comes with Vista, upgrade install and activate Forum.

  http://social.answers.Microsoft.com/forums/en-us/vistanetworking/threads

  "Connect to a network, mail and the Internet."

  They will help you with your question in the Vista Networking Forum above.

  See you soon.

  Mick Murphy - Microsoft partner

• After the update to el Capitan my iMac will not be asleep. I put it to sleep and turn off the mouse and keyboard that goes with it, and 5-10 minutes later, he wakes up on his own. Now, I have to stop it after use and each time only. Major pain

  After the update to el Capitan my iMac will not be asleep. I put it to sleep and turn off the mouse and keyboard that goes with it, and 5-10 minutes later, he wakes up on his own. Now, I have to stop it after use and each time only. The Major pain. Any help would be greatly appreciated.

  Please test after taking each of the steps that you have already tried:

  Step 1

  Take all of the measures suggested in this support article, including those under the title "If the previous steps do not work." It is the starting point for a new effort to solve the problem.

  Note that, as stated in the article, the computer will not sleep, if some sharing services are enabled. In the menu bar, select

   ▹ System Preferences... ▹ Sharing

  Disable all sharing services.

  Step 2

  If sharing music iTunes home sharing is enabled, disable it or quit iTunes. Do the same with third-party applications that have a similar feature.

  Step 3

  Select

   ▹ System Preferences... ▹ Accessibility ▹ Speakable Items: Off

  Step 4

  Select

   ▹ System Preferences... ▹ ▹ Advanced Bluetooth...

  and uncheck the two boxes marked

  Open Bluetooth Setup Assistant at startup if...

  Step 5

  Reset the printing system.

  Step 6

  Back up all data.

  Triple-click on the line below on this page to select, then copy the text to the Clipboard by pressing Control-C key combination:

  /var/vm

  In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

  A folder named 'vm' should open. Inside, there may be a file named 'drag '. Move this file and only this one in the trash, but do not yet empty. You will be asked for your password. Close the folder window.

  Restart the computer and empty the trash.

• Why attached used pps files opened after the latest Automatic update of the ie8?

  Attn: Microsoft Brainiacs; IT IS VERY ANNOYING!
  attached pps files won't open if clicked in outlook express/ie8 after automatic update more recent.
  When I try to open files pps attached, this is what I get.
  a box with a red x will appear and this is the message;
  "this file has no program associated with it for performing this action.
  Create an association in the FOLDER OPTIONS Control Panel."
   
  Before the automatic update, this function worked fine.
  Also, the association for pps files is still there in the Folder Options Control Panel.
  and more if I save the pps file attached somewhere / anywhere and then click on it, it opens fine.
  .. This failure to launch opening pps files attached, that happened after the latest Automatic update,
  .. just one more why people hate automatic updates or updates of any kind.
  like the previous functions of work suddenly and inexplicapbly no longer work after the update took place!
  So what's the cure for this annoying problem?
  E-mail address is removed from the privacy *.

  I have XP SP2 and PPS PPViewer 7 NOT VISTA
   
  That's what my watch key

  HKEY_CLASSES_ROOT\.pps\PowerPoint.slideshow.8
   
  not HKEY_CLASSES_ROOT\PowerPointViewer.SlideShow.11\shell\Show
   
  I also tried renaming it as shown below, and it will not let me NOW WHAT?
   
  where can I find IE7 to down load? all I see on the web and the site of MS is downloads for IE8
   
  Hi wwollmuth,

  I'm not sure from your post what version of Vista you are using or if you use the Viewer for Powerpoint as opposed to full Powerpoint (2003 or 2007?), but I can try to give you help to fix.

  For. Files PPS (Microsoft PowerPoint slide show)

  • Click Start, type regedit.exe and press ENTER
  • Navigate to the following branch:

  HKEY_CLASSES_ROOT\PowerPointViewer.slideshow.11\shell\Show

  • Click view , and then click Rename
  • Type the word Open so that the show is replaced with the Open command
  • If you have the PowerPoint 2007 Viewer is installed, repeat the steps above in this key, thus:

  HKEY_CLASSES_ROOT\PowerPointViewer.slideshow.12\shell\Show

  • After having changed from Show to Open, close the Registry Editor window.

  For. PPT (Microsoft PowerPoint Presentation) files

  • Click Start, type regedit.exe and press ENTER
  • Navigate to the following branch:

  HKEY_CLASSES_ROOT\PowerPointViewer.show.11\shell\Show

  • Click view , and then click Rename
  • Type the word Open so that the show is replaced with the Open command
  • If you have the PowerPoint 2007 Viewer is installed, repeat the steps above in this key, thus:

  HKEY_CLASSES_ROOT\PowerPointViewer.show.12\shell\Show

  • After having changed from Show to Open, close the Registry Editor window.

    For more information, please click on the following link:

    http://www.Winhelponline.com/articles/149/1/Unable-to-open-PPS-attachments-directly-from-Windows-mail-in-Windows-Vista.html

    For now, the only 'solution' which is known to 'cure' this problem is to uninstall IE8 and go back to IE7.

    I hope this helps. Let us know if you need help.

    Hi wwollmuth,

  I'm not sure from your post what version of Vista you are using or if you use the Viewer for Powerpoint as opposed to full Powerpoint (2003 or 2007?), but I can try to give you help to fix.

  For. Files PPS (Microsoft PowerPoint slide show)

  • Click Start, type regedit.exe and press ENTER
  • Navigate to the following branch:

  HKEY_CLASSES_ROOT\PowerPointViewer.slideshow.11\shell\Show

  • Click view , and then click Rename
  • Type the word Open so that the show is replaced with the Open command
  • If you have the PowerPoint 2007 Viewer is installed, repeat the steps above in this key, thus:

  HKEY_CLASSES_ROOT\PowerPointViewer.slideshow.12\shell\Show

  • After having changed from Show to Open, close the Registry Editor window.

  For. PPT (Microsoft PowerPoint Presentation) files

  • Click Start, type regedit.exe and press ENTER
  • Navigate to the following branch:

  HKEY_CLASSES_ROOT\PowerPointViewer.show.11\shell\Show

  • Click view , and then click Rename
  • Type the word Open so that the show is replaced with the Open command
  • If you have the PowerPoint 2007 Viewer is installed, repeat the steps above in this key, thus:

  HKEY_CLASSES_ROOT\PowerPointViewer.show.12\shell\Show

  • After having changed from Show to Open, close the Registry Editor window.

    For more information, please click on the following link:

    http://www.Winhelponline.com/articles/149/1/Unable-to-open-PPS-attachments-directly-from-Windows-mail-in-Windows-Vista.html

    For now, the only 'solution' which is known to 'cure' this problem is to uninstall IE8 and go back to IE7.

    I hope this helps. Let us know if you need help.

  Dave D
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  Hi wwollmuth,

  I'm not sure from your post what version of Vista you are using or if you use the Viewer for Powerpoint as opposed to full Powerpoint (2003 or 2007?), but I can try to give you help to fix.

  For. Files PPS (Microsoft PowerPoint slide show)

  • Click Start, type regedit.exe and press ENTER
  • Navigate to the following branch:

  HKEY_CLASSES_ROOT\PowerPointViewer.slideshow.11\shell\Show

  • Click view , and then click Rename
  • Type the word Open so that the show is replaced with the Open command
  • If you have the PowerPoint 2007 Viewer is installed, repeat the steps above in this key, thus:

  HKEY_CLASSES_ROOT\PowerPointViewer.slideshow.12\shell\Show

  • After having changed from Show to Open, close the Registry Editor window.

  For. PPT (Microsoft PowerPoint Presentation) files

  • Click Start, type regedit.exe and press ENTER
  • Navigate to the following branch:

  HKEY_CLASSES_ROOT\PowerPointViewer.show.11\shell\Show

  • Click view , and then click Rename
  • Type the word Open so that the show is replaced with the Open command
  • If you have the PowerPoint 2007 Viewer is installed, repeat the steps above in this key, thus:

  HKEY_CLASSES_ROOT\PowerPointViewer.show.12\shell\Show

  • After having changed from Show to Open, close the Registry Editor window.

    For more information, please click on the following link:

    http://www.Winhelponline.com/articles/149/1/Unable-to-open-PPS-attachments-directly-from-Windows-mail-in-Windows-Vista.html

    For now, the only 'solution' which is known to 'cure' this problem is to uninstall IE8 and go back to IE7.

    I hope this helps. Let us know if you need help.

  Dave D
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• On Windows 7, after the update of Lightroom 2.6 to Ligthroom 6 I am unable to fix photos [was: Hello,]

  On Windows 7, after the update of Lightroom 2.6 to Ligthroom 6 I am unable to correct photo

  The program (Lightroom 6.3) systematically freezes and needs closure after every temptation of correction development.

  The development and mailing of the crush program program ' are at Microsoft did not help.

  My system dump here:

  Lightroom version: 6.3 [1052427]
  License: Permanent
  Operating system: Windows 7
  Version: 6.1
  Application architecture: x 64
  The system architecture: x 64
  Number of logical CPUs: 4
  Processor speed: 2.5 Ghz
  Built-in memory: 8155.1 MB
  Memory real available pour Lightroom: 8155.1 MB
  Real memory used by Lightroom: 1035.4 MB (12.6%)
  Virtual memory used by Lightroom: 1007.6 MB
  Cache memory size: 100.3 MB
  Maximum number of links used by Camera Raw: 4
  SIMD optimization of Camera Raw: SSE2, AVX
  The system DPI setting: 96 DPI
  Composition on the Desktop enabled: Yes
  Views: 1) 1920 x 1080
  Input types: multipoint touch: no, touch integrated: no, built-in pen: no, touch external: no, External plume: no, keyboard: no

  Parents to the graphic processor information:
  AMD Radeon HD 7800 M series

  Check the supported OpenGL: past
  Vendor: ATI Technologies Inc.
  Version: 3.3.13399 context 15.200.1062.1004 the base profile
  Renderer: AMD Radeon HD 7800 M series
  LanguageVersion: 4.40

  
  The application folder: C:\Program Files\Adobe\Adobe Lightroom
  Access to the library path: E:\Lightroom\Lightroom catalog Qnap - 2.lrcat
  Settings file: C:\Users\Joe\AppData\Roaming\Adobe\Lightroom

  Installed modules:
  (1) external module connected mode Canon shooting
  (2) external module of shooting in connected mode Nikon

  Markers Config.lua: no

  Adapter n ° 1: supplier: 1002
  Device: 6827
  Subsystem: 31e1002
  Revision: 0
  Video memory: 1003
  AudioDeviceIOBlockSize: 1024
  AudioDeviceName: 1 - Philips FTV (AMD High Definition Audio Device)
  AudioDeviceNumberOfChannels: 2
  AudioDeviceSampleRate: 44100
  Build: not initialized
  Direct2DEnabled: false
  GPUDevice: not available
  OGLEnabled: true

  Thanks for the help!

  Go to Preferences, click the performance tab, and then uncheck the box.

• Determine if the end date is after the start date

  I have 2 date fields in a form.  When I click the button submit, that I'm trying to ensure that the end date is after the start date.

  Here is the code I use:

  var sDate = Date.parse (BackgroundInformation.Background.CheckingDateStart.rawValue);

  var eDate = Date.parse (BackgroundInformation.Background.CheckingDateEnd.rawValue);

  xfa.host.messageBox ("Start Date:"+ BackgroundInformation.Background.CheckingDateStart.rawValue ");

  xfa.host.messageBox ("eDate: sDate" + eDate + ":" + sDate);

  if(sDate > eDate)

  	{
  	valid = false;
  	fieldName += "Start Date is greater than the end Date."
  	}

  The message box displays the start date 2014-10-30 but sDate is Nan.

  I tried:

  var eDate = new Date (BackgroundInformation.Background.CheckingDateEnd.rawValue);

  sDate var = new Date (BackgroundInformation.Background.CheckingDateStart.rawValue);

  and when I display sDate says 'Invalid Date '.

  Any ideas?

  It should work...

  var sDate = BackgroundInformation.Background.CheckingDateStart.value.date.value;

  var eDate = BackgroundInformation.Background.CheckingDateEnd.value.date.value;

  xfa.host.messageBox ("eDate: sDate" + eDate + ":" + sDate);

  if(sDate > eDate)

  	{
  	valid = false;
  	fieldName += "Start Date is greater than the end Date."
  	}

• How do I reduce the data file after the moving images to another data file

  All,
  
  I did a test of simepl to see how should I reduce my data file after the transfer of the objects thereof.
  
  I had an image in my data file USER_image, which is about 9 GB in size. I created the new data under the new tablpespace file and moved all the images in this new space of tables. So my old tablespace of image with its data file is now empty. At least there is not all user objects.
  
  Now I tried to resize the old datafile (USER_image) to a smaller value, but I keep this error
  "ORA-03297: file contains data beyond the value required to RESIZE.
  
  The file size is 9 GB and I tried to resize to 8 GB but it still does not allow me.
  
  Is it possible to resize a data file after moving all its purpose?
  I'm something wrong or missing something?
  
  Thanks in advance.

  If you old image tablespace is indeed empty (you need to run a statement against DBA_SEGMENTS to check) then you can bring it, data files included.
  After this, you can create a 'new' tablespace with the old name and desired data file sizes.

• HP EliteBook 850 G3: HP EliteBook 850 G3: its problems after the update of Windows 10 anniversary

  Hi people!

  After the update of Windows 10 birthday I have problems with my sound card. There are two sound cards listed by Device Manager. The first is "Conexant Audio of ISST" and the second "Intel High Definition Audio". I know not weather it was the case before the update. I just recognized it after the update when I had sound problems.

  In any case, on a sound start works on the other boot it does not work. It seems that Windows chooses the sound card, every time when it starts. Sometimes it takes the bad sound card.

  I tried to uninstall maps its and their resettlement. On the HP site, there is a driver for the Conexant map bot no driver for Intel High Definition Audio card. 10 Windows itself is not find a driver for this sound card. I also tried to reinstall the other drivers, chipset drivers for example. But unfortunately it did not help. I also tried to disable the Intel High Definition Audio, but also without success.

  What else can I try? I don't want to reinstall Windows. There must be a solution without this. Any ideas? Here's a screenshot of my device manager, perhaps it helps:

  

  If you need more information, please let me know.

  Best regards

  Ty

  I just tried this driver and I still have sound after 6 resets.

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_171406_1

• After the update to cc 2015 im blackened! I can't use anything more. Does anyone know how it works?

  I have an account until March 2016

  but after the update I m blackened.

  Who knows what to do?

  Are you sure you are using good Adobe Id to connect with creative cloud, you can check: https://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html . Make sure you check the hosts file.

• I'm unable to install Adobe software licenses after the connection. It is said that it does not recognize my username after login.

  I'm unable to install Adobe software licenses after the connection. It is said that it does not recognize my username after login.

  Yes.  and?

• I can't use creative cloud. After the program open, I see backbone of creative cloud and empty space without all the icons. I want to download photoshop as I pay by bank transfer for Adobe...

  I can't use creative cloud. After the program open, I see backbone of creative cloud and empty space without all the icons. I want to download photoshop as I pay by bank transfer for Adobe...

  If you see a blank white screen, see this link. If you see something else, please let us know what you see.

  Blank white screen. Sign in | Creative cloud Packer

• Hi - I have an old Adobe Audition 1.5 and I used to be able to hear that I was recording. After the update of computer and reload Adobe Audition 1.5, can no longer hear the recording, but only on playback. Please notify.

  Hi - I have an old Adobe Audition 1.5 and I used to be able to hear that I was recording. After the update of computer and reload Adobe Audition 1.5, can no longer hear the recording, but only on playback. Please notify.

  Monitoring is done through your audio device, no hearing. When you updated your PC, playback of the audio device settings would have been reset. One of them includes the follow-up of the input jack, and that's what you need to restore. Since we do not know which audio device you use, it's all that we can tell you, except that if it is a device internal, you will need to open the volume control options and he change it. It depends on the good OS versions...