Under control panel - sounds - Audio peripheral No. (Windows XP).

Similar Questions

• Inspiron 1525 not able to select the internal microphone for the webcam, or it appears on the Control Panel, sound, Audio devices

  Initial problem was Dell Webcam video recording record any sound.

  In the Panel configuration, Device Manager, sound video and game controllers, there are two high definition Audio devices listed: location 1 (internal Bus High Definition Audio) - I take it that it is the internal mic. and location 2 (Audio High Definition Bus Interior) - I take it that it is the external microphone jack. Both have the same version of the driver.

  Control Panel, sound, the recordings tab showed 2 devices that looked like identical except the bars that show green with volume were only on the first, which is also the default and would detect sound if you're real close to the webcam microphone when you talk. The two devices displayed as 'work '.

  Accessories, Sound Recorder records are silent any distance you get to internal webcam mic.

  Dell WebCam Audio Source tab has two selections, the two reading Microphone (3 - high definition Audio Device). Both selections recorded the sound with the EXTERNAL microphone jack. There is no way to select the internal microphone webcam, it is not an option.

  According to the instructions found on the web, I uninstalled the first device only in the Device Manager and rebooted. The same version of the same driver has been installed. But now the parameters have changed. Device Mgr shows Loc 1 and 2 pass. However, under the Øresund, tab records there are always 2 features, but the first said "currently unavailable", is always the default and the sound bars that go for green for the audio tests are ANOTHER unit now instead of the first. If you check the properties of each device, they BOTH show the same location 2 (inside Bus High Definition Audio), i.e. the external microphone jack.  Loc 1 device (built in mic) does not appear!

  Accessories Sound Recorder works with the EXTERNAL microphone. (How does he know that one to use, it is not giving me a choice?)

  If the tracking device 1 (internal microphone) does not appear anywhere besides than Device Manager. I want to use the internal microphone for Skype and webcam. Somehow, I need to get the Loc 1 unit appears on the sound - recording tab and in the Source Audio Webcam list? What should I do?

  Thanks in advance for your help.

  Jimco

  Go to the Inspiron 1525 support page

  http://www.Dell.com/support/home/us/en/04/product-support/product/Inspiron-1525/drivers

• Disable Control Panel for all users in Windows Xp

  Hi, I use windows XP Professional, I tried to disable the control via "gpedit.msc" Panel but it is always open to guests account n other account... Is it possible to disable the "Control Panel" / workstation and anything else that the case may be for all user accounts? How can I set privileges for any user / account of comments...

  Van ' t disable you my computer because that's where all the CD USB and all that jazz. You can restrict access to drive Local (c) but I'll have to check with a couple of my tech people to discover the steps on how to.

• Some windows, such as Control Panel does not open in Windows Vista

  I recently installed Windows Vista. When I try to open some windows, for example, property, Control Panel, either nothing is past or a brief flash of the window opening and immediately closing. I tried restarting the computer and checcked for viruses. The installation has been enabled.

  To see if a fix is available

  In Control Panel (and select Classic discovered in the left pane) select reports on the problems and Solutions (problem of type in the START search box), go to historical problem, right-click of your error and choose check for the Solution.

  You can also right-click and choose Details for more information. Post these details here. The name of the Module fault is important information.

  Close the browser and start a command prompt

  • Close Windows Explorer
  • Start - All Programs - Accessories - right on command prompt and choose run as administrator.
  • Click Start. Ctrl + Shift + Right-click on an empty spot (just above the power of buttons is one place) then Exit Explorer.
  • Press Ctrl + Shift + Esc
  • Control all processes to explore are closed. On the process tab select explore and right-click and choose end process, repeat if more of an Explorer in the list.
   
  Then to restart the Explorer after trying all of the following
  • Press Ctrl + Shift + Esc
  • In the Task Manager, click the file menu and then click new task (run) and enter explorer
  Reregister the shell registry entries
   
  Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).
   
  regsvr32 /i shell32
  regsvr32 /i urlmon.dll
  regsvr32 RPCRT4.dll
  regsvr32 PROPSYS.dll
  regsvr32 MSCTF.dll
  regsvr32 cscui.dll
  regsvr32 rsaenh.dll
  regsvr32 timedate.cpl
  regsvr32 ATL DLL
  regsvr32 OLEACC.dll
  regsvr32 actxprxy.dll
  regsvr32 USERENV.dll
  regsvr32 msshsq.dll
  regsvr32 NaturalLanguage6.dll
  regsvr32 thumbcache.dll
  regsvr32 WINTRUST.dll
  regsvr32 MMDevAPI.DLL
  regsvr32 audioses.dll
  regsvr32 audioeng.dll
  regsvr32 ExplorerFrame.dll
  regsvr32 msi.dll
  regsvr32 FirewallAPI.dll
  regsvr32 netshell.dll
  regsvr32 pnidui.dll
  regsvr32 QUtil.dll
  regsvr32 c:\windows\system32\wpdshserviceobj.dll
  regsvr32 WINHTTP.dll
  regsvr32 C:\windows\system32\qagent.dll
  regsvr32 C:\windows\system32\portabledeviceapi.dll
  regsvr32 wbemprox.dll
  regsvr32 wbemsvc.dll
  regsvr32 fastprox.dll
  regsvr32 imapi2.dll
  regsvr32 wshext.dll
  regsvr32 gameux.dll
  regsvr32 msxml6.dll

  regsvr32 vbscript.dll

  regsvr32 jscript.dll
  regsvr32 wshext.dll
  regsvr32 wshom.ocx

  regsvr32 wshcon.dll

  regsvr32 scrrun.dll

  Delete folder settings
   
  Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).
   
  Reg delete "HKCU\Software\Classes\Local Settings\Software\Microsoft\Windows\Shell" /f
   
  Reg delete "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Streams" /f

   

  Reg delete "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\StuckRects2" /f
   
  Delete the thumbnail and icon Caches
   
  Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).

   

  del "% userprofile%\AppData\Local\IconCache.db".

   

  del "% userprofile%\AppData\Local\*.db".
   
  A boot is a way to explore
   
  It can be caused by a shell extension.
   
  The Explorer is built on addin programs called Extensions of Shell. The standard is provided by Microsoft, but programs add their own.
   
  Some people say that warn their pawns of viruses on this website. The software is perfectly fine.
  • Download

  http://www.NirSoft.NET/utils/shexview.html

  • Close Windows Explorer
  • Launch ShExView by right click and choose run as administrator
  • Disable all non-Microsoft shell extensions
  • Click Start. Ctrl + Shift + Right-click on an empty spot (just above the power of buttons is one place) then Exit Explorer.
  • Press Ctrl + Shift + Esc
  • Control all processes to explore are closed. On the process tab select explore and right-click and choose end process, repeat if more of an Explorer in the list.
  • Click the file menu and then click new task (run) and enter explorer
  and if it helps, re-enable one by one to identify the who.

• whenever I click on 'control panel' or 'computer', it displays "windows Explorer has stopped working". It does not display the display of the control panel.

  Whenever I want to check computer (memory) space available on each drive, click on the 'computer' logo, it does not display the response on the screen. Instead, it displays a screen with a message "Windows Explorer has stopped working" for a few minutes and then returns to the original display.  I get the same answer, whenever I click on the "control panel" logo  I need advice how to solve this problem. Thank you.

  Hello

  Did you change your computer?

  I suggest you follow the link (this also applies to windows vista)

  Explorer Windows stopped working

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3

• Cannot access control panel Add/Remove programs and Windows xp system files

  I get the error message: Windows cannot find 'C:\windows\system32\rundll32.exe' when I try to open add/remove folder in Control Panel

  Hello rocksnag, welcome.

  If you click START then type C:\Windows\System32\rundll32.exe' (without the quotes) and press on enter, what happens?
  If it says its lack, try this:

  1. download a copy of rundll32.exe from this location: http://sites.google.com/site/pwdionline/Home/rundll32.zip
  * This version works with Vista 32 bit to get references
  2 extract the file to your desktop, right click and select 'copy '.
  3. click on START
  4. click on 'computer '.
  5. double-click on "disk Local (c)"
  6 double-click on "Windows".
  7 double-click on "System32".
  8 right click in all white space, and then select "Paste".
  9. restart your computer
  
  Let us know if this helps,

  Thank you!

• Control Panel does not not in windows vista

  I have windows vista Basic... when I open the Control Panel, windows Explorer stops responding... and after you close the program if I start again, it works fine... (the same thing happens to the center of the network) I m not able to understand... someone can help me regarding this

  Hello

  I have the same problem with my crash every time windows Explorer control panel that I open it. I could not kenza solution on the forums, but I tried something that worked:

  Click with the right button on the taskbar, go to properties, Start Menu tab and click Customize.
  Select Control Panel: DISPLAY AS a MENU.

  Now, try to restart. You can access the components of the control panel in the start menu. You can open one of them without having to open the control panel. And after you open one of them, you can access the entire panel without crashing (right click the start menu panel control and click OPEN).

  It really solved my problem, I hope that it fixes yours. :)

  Pls. spread the word if you find this apparent I can't post from some of the forums.

• Cannot open option programs and features in Control Panel configuration, as well as Windows Defender.

  Original title: programs and features.

  The part programs and features of my Control Panel has been disabled. How can I obtain a permit? My Windows Defender is not as open. Is it possible to use Windows Defender to disable programs and features. I could do this for me.

  I have not tried to use the programs and features for months.  I get a message that says that your system administrator has disabled P & F. I get the same message when I try all the options on the left screen. I am the administrator.

  Thanks for any help you can give me...

  Hello

  
  1. what exactly happens when you try to open windows defender or programs and features in Control Panel?
  2 How long have you been faced with this problem?
  3. you are the administrator of the computer?
  4. have you been able to open the programs and features option or defender of windows without any problems earlier?
  Please provide more information. This will help us assist you better. It is not possible to disable the windows Defender Control Panel.
   
  You can try the steps below and check if this help to allow programs and features.
  a. click the Start button, type gpedit.msc and press ENTER.
  (b) in the left pane, click User Configuration, Administrative Templates, control panelandprograms.
  c. double-click on the page of 'Programs and features' Hide.
  d. now selectnadou E option and click the ok button.
  e. close the Group Policy window.

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• How would a UAC prompt enter information identification of the administrator on the programs and the elements of the control panel of my choice? [Windows 7 Ultimate]

  I'm working on setting up a guest account on a Windows 7 PC I have. I was fiddling around in local security and group policy strategy to try to make an account secure, but limited on this PC. I understood how to fill most of the policies I want to apply to this account, but have not been able to find one for policy, as I said in the title. I want to make is that if a program or a component of the Panel tries to be executed, I wish a UAC popup prompt. However, I wouldn't that happen with all the programs and items in Control Panel, only some of them. I found how to block programs and settings panel of current or well configured, but I want some of them to run on the base if admin credentials are entered. Any help is greatly appreciated!

  Not really - they would not be able to get there. For most of the policies, your policy will be either hide the option completely (they'd never see even the ability to click on at all), or he would tell them he was disabled by policy and their only option is to click on 'OK '.  This is because UAC is not designed as a way to temporarily lift a policy - it is designed as a way to prevent a user (or more exactly, a running program using the security context of the user) to escape from their Bishop model and causing changes to files or registry keys that are not directly for them (their own key to personal registry or a file folder).

• Multiple instances of device under Control Panel/Default programs W7

  Under default settings Control Panel/Default programs/exchange for media or devices, under devices, both devices have several cases shown.  My Tablet appears five times.

  How can I remove additional entries, and how to know that you leave as active?

  oso7 gives the right answer in the second post down.  At least it worked for me.

  solution

• 'Sounds' tab in the sound control (Control Panel - > sound) is MISSING! How to get him back?

  I would like to change my sound system. But I can't find any which sounds tab when I go into control panel of--> Sound.

  The tabs for playback, recording & Communication are present, but the sounds tab is missing.
  How can I get that back and forth, or is it alternate to change system sounds?
  Any help is appreciated.

  Hello

  1 have had any changes made to the computer before the show?

  Run the System File Checker tool and check.

  http://support.Microsoft.com/kb/929833

• computer/control panel does not load in windows 7

  Hello

  I had this problem and have sought for a while again, unsuccessfully, trying to open the computer, it's green bar slowing down the loading, but once completed no content will show in the computer at the same time control panel does not load.  This problem will not occur all the time. and if I close the window and reopen it. He came back to normal, did a sfc according to other threads have disabled the network discovery.  past again, Please HELP?

  CONCERNING
  LEE

  Click Start
  Type: CMD, according to the results, right-click CMD
  Click on "Run as Administrator"
  At the command prompt, type: sfc/scannow

  This will check for any breach of integrity

  Restart your system

  also:

  Check your hard drive for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  If the problem persists, I suggest that you scan your computer for malicious programs:

  There are some that will hide your files/folders so that you don't normally see them. I strongly suggest to run a scan on your computer with your antivirus/antimalware software. If you need to, you can also use the Microsoft Safety Scanner, it's free:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Also, if your files are hidden, check out the following article on how to display the:

  http://Windows.Microsoft.com/en-us/Windows7/show-hidden-files

• How can I remove a toolbar that isn't in my programs under control panel?

  I downloaded a survery/good discount site and automatically downloading a toolbar that I don't want.  Under settings, you cannot hide or remove.  I contacted them and they told me to go into the Control Panel, programs and uninstall.  Unfortunately, it isn't here.  I use Google Chrome under the toolbars is not also listed to be able to remove.  I am at a loss how to get rid of him.  Any help is appreciated.  Thanks, Shawnascy

  You can simply toggle installed toolbar on Google Chrome with simple steps:

  • Open your Google Chrome
  • Click the button settings the ICON 'KEY' in the top right under the close button.
  • Go to TOOLS, and then click the EXTENSIONS submenu
  • Click DISABLE to disable the toolbar or UNINSTALL it if you want to completely uninstall the toolbar.
  • Just then restart Chrome.

• Control Panel and search functionality in Windows 8 close automatically and return to high office; Computer is not compatible with Win 8.1

  I had a problem with Windows 8...  Problem started after several requests of "upgrading to Windows 8.1, I succumbed.  Windows 8.1 was not compatible with my hard drive.  Screen kept flickering.  MS supports finally told me that there is an incompatibility problem.  We have restored the Win 8.  They have me do not upgrade.  But never told me how to avoid invitations.  The problem is finally updated on its own and now after wiping everything 3 times and reinstall my software, I tried to go into the control panel to find where I can disable the automatic upgrade.

  The problem I have now is I can't have in Control Panel or the search function.  Whenever I click on it, a screen appears, and then closes and I'll be back on the desktop.

  My questions:

  How can I fix the problem where the control panel automatically closes?  Can it be done without reinstalling Win 8 for the 4th time?

  Assuming I'm correct, how can I prevent the automatic upgrade to 8.1 Win forever?

  It would have been nice if MS had designed the upgrade to first check the computer to see if she had all the necessary drivers and was otherwise compatible with 8.1 and then if not to prevent the upgrade.  It would have saved me countless hours to deal with this problem.  I'll think twice before getting a computer with windows again.

  If you are not running this time then Windows 8.1 is not the reason why the Panel closes.  This type of problem is almost always a virus or malware, but can also be caused by other programs that are in conflict.  So I'd start first by asking, you run 8.0 at this time?  If so, the closing Control Panel problem is due to corruption or an infection. If you are reasonably sure that you do not have a virus (run scans), so I'll try to remove all recent programs have been installed at the beginning of the question, try to see what is happening in Mode safe mode (hold SHIFT when you click the Restart option to get there).

• Windows Update Control Panel does not open in Windows 8

  Hello

  I use Windows 8 unique language that came pre-installed with my laptop.

  My problem is that the option to update windows from the Control Panel does not open. All other options like Firewall, power, administration etc tool are all very well opening. but every time I try to access windows update, it gets stuck, curious thing is that explore is not having hung or whatever it is, the Explorer appears not any message "not responding" in Task Manager either, everything else seems to work fine, except for the update of windows which is completely frozen.

  I've included a snapshot of the frozen window also...

  I tried to use the restore of the system for as long as possible, but it does not work. I want to update to windows 8.1, unfortunately I can't do unless I upgrade my windows 8 first. Please help me to solve the problem...

  Thanks in advance

  

  Hi Gray,

  Thank you for the update on the question and sorry for a delayed response.

  If the Windows Update service is missing in services.msc then I suggest you follow the suggestions provided by the suggestion of Ned Pyle and jasoncollege246 the link below.

   

  http://social.technet.Microsoft.com/forums/en-us/w7itprogeneral/thread/5a8bf018-C522-4a8e-a857-ac73f5e706ee

  Note: Follow the steps described in this section carefully. Serious problems can occur if you modify the registry incorrectly. Before you modify it, Save the registry restore problems.

  Keep us updated on the issue and we will be happy to help you.