under vista and can no longer connect

Similar Questions

• I've upgraded to windows 7 my netbook aspire one AOD250 and can no longer connect wireless

  I've upgraded to windows 7 my netbook aspire one AOD250 and can no longer connect wireless and downloaded the driver, but still no luck - any help would be appreciated.

  Thank you.

  Jen

  I just found out missed me an update of the driver when I was in the Device Manager and once I updated (obviously no has not updated the correct driver at the start) my wifi does not work.

  Thank you very much for your help!

  Jen

• I use Dreamweaver CS4 and can no longer connect to Device Central - can you help me with this?

  I use Dreamweaver CS4 and can no longer connect to Device Central - can you help me with this?

  Device Central was interrupted on 23 April 2012.

  http://www.Adobe.com/products/devicecentral.html

  And replaced with Adobe Edge inspect CC (for subscribers of cloud)

  http://HTML.Adobe.com/edge/inspect/

  Nancy O.

• Installed a version not genuine Windows 7 and can no longer connect to my wireless network.

  REMOVED FROM WINDOWS VISTA AND NOT GENUINE WINDOWS 7 INSTALLED

  Hello

  What is the best way to go to solve the following problem? My brother downloaded a non-genuine version of windows 7 to Utorrents. My laptop had Vista originally. I can't find any trace of Vista anywhere, and now it's a problem when I set up my wireless internet connection.

  Have to buy an upgrade to a real windows 7 or what? Vista is obv not terrible as it sounds. Just want a normal work :) laptop

  Thanks for your help

  Mike

  In this case, you have two options.

  (1) buy a copy of the full details of which edition of WIndows 7 that you want to use (this one sounds, basic home edition can be sufficient - if not, Home Premium) and reformat/reinstall using them.

  (2) buy an edition upgrade of WIndows 7 for which edition you want AND get the discs of recovery of the manufacturer - reinstall Vista and then upgrade to WIndows 7.

  (3) - ONLY possible if the COA sticker is present and correct for a qualifying operating system (that would be) - buy a complete upgrade to Win 7, and use double-install method to install it clean.

• Recently installed vista update. I can no longer connect to my home wireless network.

  Recently installed vista update.  I can no longer connect to my home wireless network.  I get a message that says 'wireless link failed because windows did not receive response from the access point or wireless router.  I troubleshott he said of computing could be from low signal strength and yet it shows the strength of 100%.  Anyone have any ideas?

  Hello

  Check the firewall it is maybe it has been reset.

  In general.

  Most laptops have a physical switch for the wireless card. Read the manual of the computer and make sure that the wireless adapter is on.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  Make sure that if there is Wireless Utility a utility vendor is not running with the native Windows wireless utility.

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Above everything is OK and it connects to the wireless router. Log in from any computer which is, or can be connected to the router with a wire wireless, disable wireless security, make sure that the wireless streaming is enabled and try to connect with no. wireless security.

  When the work turns on the Wireless security.

  Note * people sometimes make mistakes in writing and retype the password for security.

  Another way is to copy in the menu of the router and then paste it when asked of the wireless card.

  --------------------------------------------------

  I really checked and configured every thing and it doesn't work.

  Software firewall application that is not configured to allow local traffic (between the computer and the router is also a possible problem.
  some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  
  

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• I have an acer aspire 5920 on vista and can't connect any printer to it... error message 0 x 00000002 arrives

  I have an acer aspire 5920 on vista and can't connect any printer to it... error message 0 x 00000002 comes up... all clues?

  Hello

  1 are there any changes or updates made on the computer before the show?

  2. you try to add a network printer?

  3. What is the full and exact error message?

  4. when exactly you get the error message?

  5. What is the number of brand and model of the printer you are trying to connect?

  Method 1:

  I suggest you check out the link and try sharing the printer:

  Share a printer

  http://Windows.Microsoft.com/en-us/Windows-Vista/share-a-printer

  See also:

  Network printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  Method 2:

  Check out the links and check if that helps:

  File and printer sharing: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/file-and-printer-sharing-frequently-asked-questions

  Troubleshoot file and printer sharing

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-file-and-printer-sharing

• After the installation of Windows Live Movie Maker, I can no longer connect to the MS Community

  Original title: suddenly I can not connect to the Microsoft Community

  I present this post on a second computer.  Up to a few hours, after I installed Windows Live Movie Maker, I can no longer connect to the Community MS on my other PC.  When I click on 'Sign In' to the MS Community Home Page, I get only a blank, even if his tab page says "connect to your Microsoft account.

  I think the problem is in IE because I can sign correctly using Chrome or Firefox.

  Can someone shed some light on this problem and we hope to provide a solution?

  I have a similar problem on this computer and I am trying to solve the problem. I managed to connect to the Microsoft Community forums by opening Internet Explorer InPrivate browsing. This is only a workaround until I have solve the underlying problem.

  PIN Internet Explorer in your taskbar, do a right click on the new icon in the taskbar and select start InPrivate browsing. You can then enter the web address of the Microsoft Community and it should open the community forum. If you click on connect, you will be presented with the Login Page. Unfortunately, please follow this procedure complicated, whenever you want to connect to the community.

  On this computer I can connect to other services that require registration to the Microsoft Account for example TechNet. The problem is only with the Microsoft Community forums.  What version of IE are you using?

  A suggestion if you are using Internet Explorer 9, 10 or 11.

  Access your profile. Make sure that you have connected. Click all Threads, click on the star to the top right of the screen (you need to press F11 to see if you're reading full screen), click the scroll right to add it to Favorites, and then select Add to Favorites bar. Change the long name for something memorable, and you can immediately access your son in your Internet Explorer Home Page.

• Whenever I install automatic updates, I can no longer connect to the internet.

  Whenever I install automatic updates, I can no longer connect to the internet. I perform repressive restore, this solves the problem, until the next update. It already has cost me over $ 300 and now I can is more updated windows if I want to keep my internet connection?

  Hi Beverly,.

  Welcome to the Microsoft community!

  After the description looks like after installing the updates you can't access the Internet. We need additional information about this problem. Please answer these questions to help you best:

  1. What antivirus do you use?

  2. what happens when you try to connect to the Internet after installing updates?

  3. the updates are installed on the computer?

  Provide us the details of the update that you have installed.

  For more information, see:

  See the Windows updates are installed

  Method 1:

  After you install the updates, check if you are able to connect to Internet in Mode safe mode with networking.

  Step 1:  Networking Mode safe mode starts Windows in mode safe mode and includes the network drivers and services needed to access the Internet or other computers on your network.

  Check out this link to start safe mode:

  Start your computer in safe mode

  More information on:

  Startup options (including safe mode)

  Step 2:  If you are not facing the problem in safe mode, and then put your computer in a clean boot and search for the question.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Once you are done with the boot, followstep 3in the article by putting your computer to normal startup.

  In addition, visit these links and try the steps listed in the link provided and check if that helps.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

  Hope this helps and provide us more information if you need more assistance.

• Update 4.0 to esx 4.1.0 348481 can no longer connect in SSH

  Hello:

  I've recently updated 4 host esx 4.1.0.  I called them VM1, VM3 and VM5 VM7. I also installed a new physical server Vcenter. For one of the hosts, (VM1), I decided to do a fresh install using the CD. I am doing this for my own personal reason so I'm forced to redo a machine from scratch due to rehabilitation.

  For my 3 other hosts (VM3, VM5, VM7), I used the Update Manager tool, followed by documentation and some UTube tutorials. This seemed to work well. I had all the computers in a cluster, and they all worked without any problems.

  What I'm trying to do now is to install a component of Dell. Following the instructions for it, I ran into an issue with SSH. I can no longer connect SSH using PuTTY with the two previous accounts that I had before the upgrade.

  When you perform a new installation, I always create a 2nd account called vmadmin. I'm doing this on the same screen, he asks the password to root for the installation CD. Once I have installed host I use an article of Vmware to access SSH root (8375637 KB)

  Interstingly enough VM1 (installation of one I did costs since) allows me to connect in SSH using VMadmin... and roots. But the three hosts I upgraded using the Update Manager is no longer connect in SSH allows you to use one of the two accounts.

  Using Vcenter I can connect to the host directly using roots but is no longer it will allow the account vmadmin connect (permission denied).

  When I connect to the host using Vcenter, I see the vmadmin account. I tried to look at the properties on both my work (VM1) host computer and a work not to compare... but everything looks the same.

  Can anyone help with what do I do to fix this? and or add a question if I can respond to the need for additional information?

  Thank you

  R

  I guess that you don't have a DRAC card in your server... otherwise, it is simple to access the console and resolve the problem.

  Have you try to connect to each host and add a new user?

  André

• Just upgraded to iOS 9.2 and can no longer receive emails from EarthLink.  Help!

  JJust upgraded to iOS 9.2 and can no longer receive emails from EarthLink.  Help!  I tried to support; what she proposed didn't work; may never come again.

  Can you send email form this account?

  Can you receive emails from another device Earthlink? Webmail?

• Have only administrator under Vista and it won't allow me to install Office 2007, saying: I need approval from the Admin... what gives?

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Have only administrator under Vista and it won't allow me to install Office 2007, saying: I need approval from the Admin... what gives? Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello. The new Admin still doesn't let me download the software. IERU! Any suggestions?

  Make sure that there is no "leftovers" MS Office components on your computer. This tutorial of MS to run an uninstall operation. Select Office suites 2007 button.
  http://support.Microsoft.com/kb/290301

  After that... Suggestions:
  Try to install the 2007 release after each suggestion is complete.

  1. run a full scan with your security program. See if he catches something.

  2. make a file system check... sfc/scannow

  Start button > Search box type cmd > look up, do a RIGHT click oncmd.exe > click onRun As Administrator > in this window cmd black and white, type at the prompt flashing sfc/scannow > press theENTER key.
  Note: there is a space between 'sfc' and ' / '.
  To sit and wait. It will take time.
  When finished, exit the cmd window.
  Reboot (restart your computer)

  3 do a disc check chkdsk/f/r...

  Start button > Search box, type cmd > look up, right-click on cmd.exe > Run As Administrator > in the black and white window, at the command prompt flashes, type chkdsk/f/r > press the Enter key.
  Note: there is a space between 'chkdsk' and ' / '.

  The screen will say something like cannot do it now, but you want to run it on reboot. Click on 'y' as in Yes > press > window cmd of output.
   
  Restart your computer. It will take a while. DO NOT stop the machine. Just wait.
   

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Home wireless network users can no longer connect to the internet via router, but can connect to the network

  Modem Arris Touchstone telephony Windows Vista on PC, router Linksys WRT54G2, Netwk disk, Set netwk as private.

  My father's home network no longer works. All Pc's are running Vista. DSL is connected to the Modem Arris. Modem is connected by ethernet to the LinksysWRT54G2 router, that is connected to the PC. Other Pc is able to connect to the local network, but not to the internet. Main PC connects to the internet with a separate connection. See the other PC on the network. Daddy has no save the password and can not get him out of Linksys.

  Never mind. After 6 hours I fixed it. I don't know how I did it, but I think it was because I have unplugged and pressed the reset button on the modem for 10 seconds.

• I can no longer connect to the internet with my main computer. Help! Going on 3 weeks now.

  Everyone is so great on this site I hope you can help.  Here goes:

  I have 4 computers on my home wireless network.  Two laptops (Windows 7 and Mac OS 10) with wireless cards internal computers and two PC (Windows XP) with Linksys wireless adapters.  I use an Apple Airport Extreme (model A1254) wireless access point.

  Three weeks ago, when Comcast Cable went all digital (I have my internet through them as well), I immediately lost internet access and wireless on all computers, printers and phones VOIP communication.

  Because I was getting an IP address of 169.xxx.x.x on my main computer, I was ordered to replace my modem with a 1000BaseT model, replaced all with Cat6 ethernet cables and network card on my main PC with a D - Link 10/100/1000 Mbit / s.   Still no internet.

  The Apple guy couldn't figure our why I could not connect then we changed my DNS to a public one and all computers, except my computer main, immediately connected server.  They are now set to obtain automatically and they are always connected.

  When guys Apple plugged my ethernet cable from my main computer at the Airport Extreme, it wouldn't connect and I got a 169 IP address and no address of DNS server.  When they connected my ethernet from my Airport to other laptops working, they connected without problem and receive an IP address valid addresses.

  They believe that some how the Comcast transition might have changed something with my internet on my PC using Windows XP SP3 since my settings and network settings had been basically the same for 2 years.  I have McAfee and Windows Firewall that I turn off when I try to connect.

  When I look under connectivity in Information systems, I have 0.0.0.0 to my IP address, dns servers, and the subnet mask

  Does anyone have any suggestions?  Thanks in advance.

  All thanks for the reply.  I am happy to say that my internet is working now.  After many hours of call Comcast Cable, they sent finally someone who seeks not to "return the ball."  There was nothing wrong with some of my equipment.  A squirrel had climbed and chewed part of the cable.  So it was not much speed going through it, the line was good enough to carry pet food.  But with the upgrade, the damaged cable could not manage.  I had no problem since the cable has been replaced.

  Thank you all

• BlackBerry OS update to 10.1.0.4181 Z10 and can no longer send texts

  I am invited to a BONES of BB10 updated to version 10.1.0.4181. I downloaded and installed the OS without any problem, took about 25-30 minutes. Now I can no longer send or receive text messages (all other features seems to work very well, the email and the call). Does anyone else have this problem? How can I solve this?

  What happens is: every single conversation I had is still in the text journal/hub, however, when I select any previous message or try to compose a new one, it automatically selects my last text, opens the conversation that appears empty and when I type the keyboard appears however the rest text field under the keyboard (cannot see it) and the Send button does not work. Any help is very appreciated!

  With the phone turned on, remove the battery for about a minute, then reinsert

• After reinstalling I can no longer connect to DAH.

  I have a gateway with xp windows 2ooo & ok printer hp4500 got a d-link to bind web & printer with Qwest int & 2nd comp with xp.  I reinstalled etc so I lost or can't get connected DAH? I installed a 2nd computer card reader & it works but only transfer of the captain of another comp.? Internet appears on the two I also tried an eithernet? cable between the two

  Hello

  ·         You try to transfer files from one computer to another?

  ·         What have you tried to reinstall?

  ·         You get the error message?

  ·         What do you mean by DAH?

  Method 1:

  You can see the KB article and check if that helps.

  How to use Simple file sharing to share files in Windows XP

  http://support.Microsoft.com/kb/304040

   

  Method 2:

  Also, see the KB article to see how to troubleshoot a home network in Windows XP.

  How to troubleshoot a network home in Windows XP

   http://support.Microsoft.com/kb/308007

   

  Reference:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/print_sharingw.mspx