under windows

Similar Questions

• Speed dial does not work with Firefox 5 under Windows 7; How can I down Firefox 4.1?

  Speed dial Extension does not work for Firefox 5 under Windows 7.

  How can I downgrade to Firefox 4.1 so that I can use this indispensable Extension?

  This link will be fix Fast Dial for Firefox 8.0.1

  http://DL-Web.dropbox.com/u/12466346/speedfox.org/addons/fast_dial-3.5b1fixed2-FX.xpi

• What printer for Satellite Pro 420CDT under Windows 95?

  What printer is best compatible with a satellite Pro 420CDT work under windows 95?

  Post edited by: LizP

  Hello

  It's an odd question since this machine with this operating system is REALLY REALLY REALLY old. If you do not want to use a printer of opportunity then I suggest to H.P. older deskjet series (e.g. 870 C or 870Cxi] I had a few years ago, the 800 series with a parallel port on a Tecra 8100 with then first and went from Windows 98 to Windows 2000. It works perfectly under the two systems.

  Hope that helps a little... :)

  Welcome them

• Tecra A8-185 - the update of the BIOS under Windows 7?

  Hi again,

  I have a question how update of the BIOS under Windows 7 ultimate x 64. I downloaded the latest version of the BIOS for my laptop (Toshiba Tecra A8-185 PTA83E). After having unpacked there is only the .exe file.

  When I try to run this file, he said, that my OS is not supported. When I run it in compatibility mode (with Vista or XP), it starts the upgrade, but gives me an error: "the BIOS upgrade is failure (8). BIOS is not able on this configuration. "What should I do? I really need a new BIOS.

  Can I run it at the start of the USB key, or whatever?

  Hi offi55

  Why do you need a new BIOS? You may notice some problems with the laptop or why are you trying to update?

  However, I think that the update should only be done on the pre-installed Windows version (XP or Vista). I guess that this update n t tested and designed to update Windows 7 so I think that would be the reason why you can t.

  So to install Windows from the Toshiba Recovery disk and try to update again. It should work.

• Tecra 8200 - works very well under Windows 98SE, but not on Windows 2000

  Hello

  I've updated my Tecra 8200 for Windows 98SE and Windows 2000.
  Windows 98SE, wireless connection works very well and I was able to access the internet through my SMC Barricade router.
  But on Windows 2000, this no longer works.
  The connection to the router is ok, but I am unable to connect to the internet or to the page web administration of the router.
  The Toshiba Wireless Client Manager provides the following information:
  Status:
  ------
  Connected to the network: SMC
  Connection: Excellent
  Access Point name:
  Channels: 2
  Encryption: on

  ----------- Warning ----------------
  Impossible to communicate with the AP.
  Please check the encryption and IRQ.

  Yet once, I insist on the fact that under Windows 98SE, everything worked well... an hour ago...

  I am running Windows 2000 SP4 with the latest updates.
  Could someone help?

  Thank you

  François

  Hello

  Thanks for the solution. I hope that the installation of Windows 2000 Service Pack 1 helped.

  Good bye

• Portege 3440 ACPI BIOS under Windows XP errors

  Hello!
  There are error messages in the system log of my laptop under windows xp saying "AMLI:ACPI BIOS trying to read more... ». The Microsoft Knowledge base describes this problem as a behavior not secure the ACPI BIOS of the specifications. There is only one solution provided by microsoft - upgrade the BIOS to the latest version. Does anyone know is it more recent than the 1.6 for Portege 3440CT version? Toshiba does support Windows XP on Portege model at all?

  Hello
  According to the official website of Toshiba Bios version 1.60 is the most recent.

• Its P100-102 of satellite crackling under windows

  Hello

  now that my CMOS problem is fixed, I thought to post the following. Before it seems as if I'm a newbie, I can say that I am really experienced with desktop computers and I never had such problems. It seems as if everything changes when you switch to a laptop. As do not leave the adapter on which battery is charged cause it can weaken over time... boring CMOS unloads... do not suspend your laptop to too much heat because of the battery... and so on and so forth.

  Well now is the sound under windows... it seems as if every time that the tower is out of mode 'sleep', the sound is crackling ever. Same sound crackling "geeting out mode 'sleep'."
  I updated the audio driver and tried even new codecs and settings of the sound card. But it still crackles. Sometimes when I watch a movie, the film jumps then the sound is crackling. So, it's like a performance problem (such as playing a dvd on a 90 MhZ Pentium with 32 MB RAM).
  What could it be now?

  Hello Stefan

  As you can see the books are a little sensitive but don? t worry not about this. After only a few months, you won't want to use office more.

  Back to your problem: check the HARD disk activity while you watch the movie. Maybe that something is running in the background and disturbing him. As far as I know on this unit there are preinstalled virus NORTON security app. Try to turn it off for awhile and check if the device works better and faster.

  If this is your first laptop play a little with all the settings and check how all of the tools and utilities works. Believe me, when the laptop is well configured once it will work without problem.

• Word 2011 will not open docx file created under Windows

  Word 2011 will not open docx file created under Windows sent me by mail after I installed El captain.

  No problem when I create a new file and re-open it. Can anyone help?

  I don't know that someone on the Microsoft forums can give you some useful tips.

• Microphone does not work under Windows XP Home - P100

  Hi all

  I am a new user of French a P100-473 series and games. I have it downgrade to Windows XP Home edition for the goal of the game.

  I use conexant high definition driver v 3.11 and its working fine but not the microphone plug on the front of the laptop. I tried all the driver conexant Web 3.12 3.14 and after and the problem is reversed, the microphone does not work very well "using the audio msn Configurator" but I have no sound.

  The driver is working properly, no error, but not sound under windows. Does anyone have a solution for me?
  I have worked on this for 1 week and I really want to resolve the thing, because the cell phone is a great product and on vista, it works like a 486.
  Thank you very much

  Fred

  Hello

  On the Toshiba download page there is unfortunately no driver audio Windows XP Home edition for this laptop preinstalled Vista. Read some other assignments that I found the same reports sound works but mic cannot be used.

  Sorry, but it is clear at the moment, there is no solution to this stupid attachment problem. :(

  Just one last thing: try to install your own Vista without Toshiba has designed tools and utilities and let me know how your P100. ;)

• Advanced Power Management under Windows 98SE for Satellite A75-S206?

  On my Satellite A75-S206, I have a partition on my hard drive under Windows 98SE.

  When I run Windows 98 on this model, the drive keeps spinning (does not turn down), the cooling fan is still running at high speed, I can't dim the monitor, or use any other feature of the advanced power management is available when running my XP partition. The utility of generic power in my Windows 98SE (Intel speed step) management does not address these problems, even if you use custom settings. The management utilities peak power supplied with recovery for this model CD only work on XP or Windows 2000, and these advanced power management utilities will not install on Windows 98.

  Is there a driver download, or is there software available for Windows 98SE downloads emulate advanced power management features that work on XP? Is there another workaround solution?

  Hello

  As far as I know, this unit was designed for the American market and came only with a XP Home and XP Pro OS.
  I checked the driver page Toshiba we and don t find all the drivers for Win98.
  Unfortunately, if you use the Win98, do without the features of Toshiba.
  Sorry, there is nothing to do.

• Wireless display on VPCZ 1390 X under WINDOWS 7 Ultimate

  Does anyone know if Sony Vaio VPCZ 1390 X under WINDOWS 7 Ultimate a WIDI. The card says it does. When I called SONY tech support said there and it just needs to be activated. A second tech support says that this isn't. can someone tell me how to check or instal WIDI for wwireless display?

  Thank you. I'll check my system.

• LabVIEW 2010 executable runs under windows xp, but not in windows 7

  Hi all.  Here's the situation.  We have Labview 2010 professional development on a computer running Windows XP.  I designed all my programs with this PC.  We have another PC which has Windows 7 with no Labview.  I'm trying to make the executable files and put them on the Windows 7 PC.  I have been here three executable files and move the Windows 7 PC.  One of the executables work correctly, the other two interrupt immediately.

  Executables that stop have temperature limits and the program is apparently seen a low temperature and so stop the program.  Yet, these same executables work fine on the PC under Windows XP.  What seems to be the case, is that the program is expelled before allowing himself read the temperatures.  I use the modules of the series C 9213 and 9211 with 9188 Chassis.   My programs are showing 0 for temperatures.  Well, it's certainly in the low temp limit, so the program stops.  However, she should not do this.  I know there is little delay with the playback of all thermcouples in 9213 and 9211 modules, but this was not a problem with Windows XP.  Even if the program starts from scratch on the XP PC, temperatures immediately appear, or appear after a second or two.  Yes, I've rarely seen a temp 0 on the XP PC, but the program doesn't stop; Give it a second or two and the time appear.  Why is it that happens in Windows 7?

  An executable that works has no measure of temperature.  It uses only 9481 modules and run the solenoids at a rate of about 0.2 seconds.  This executable works fine on both computers.

  So what - this on the modules of temperature reading that is causing a problem in Windows 7?

  Other installation data :

  -The XP PC has the updates Labview 2010 is compatible with

  -The PC Win 7 not the latest updates of Labview 2010 there are has compatibility problems.  National Instruments has given me the compatible components, and they has several levels down by the most recent (for example MAX vs MAX 5.6 v14.0)

  
  

• Sipder solitaire for Windows XP can be installed under Windows 7?

  Sipder solitaire for Windows XP can be installed under Windows 7?  My wife loves the old version better.  Thank you!

  Hi Hopeless1,

  Welcome to the Microsoft answers site.

  These are games that are embedded within the operating system; Unfortunately, it is not possible to make the Spider Solitaire Windows XP installation on the new Windows 7 computer.

  Swathi B - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• On the Sync Palm m500 using connection series with a dock under Windows 7

  Palm: m500

  Link: Serial (cradle)

  OS: Windows 7

  Problem: Palm Desktop 4.1.4 cannot be installed and does not synchronize Palm Desktop 6 using the serial connection.

  How can I synchronize the m500 using connection series with a version of PD under Windows 7?

  Nevermind, helped http://forum.brighthand.com/sync-windows-palm-os/261651-synching-legacy-pim-databases-palm-desktop-v-6-2-a.html .

• OfficeJet 4630: anyone can print reliaby with Officejet 4630 under Windows 10 (64-bit) using wireless?

  I have a couple of PCs.

  Both run Windows 10 (64-bit).

  An upgrade from 8.1 64-bit. The other is Windows 7 ultimate (64 bit).

  I bought Officejet 4630 at the end of September.

  So far I have not been able to print from a reliable PC at all.

  Sometimes maybe a page can be printed, but if I try the next page. The print queue seems to get hung.

  Worse, on a PC (Win7 64-bit upgrade), I can not connect with USB at all.

  Immediately after installing the driver, it fails to "print test page"? What gives?

  (I have not tried the USB connection with other PCs through the situation. He's far away and so connected via radio.)

  Strangely enough, it's the HP printing diagnostic seems to work perfectly. It prints the test page.

  But, after a week of Calvary and see how works the test via the web interface, I now have the feeling that

  HP diagnostics program simply sends a command that causes the printer to print a test page to itself, and not

  through the path of ordinary driver through what print ordinary application data. It can be found.

  Due to the failure of printing with a USB connection, I asked local HP support for replacement t

  hinking that unit was bad.

  However, the replacement arrived today, but the same symptom!

  Agah.

  I'm afraid that HP screwed royally here, but worse yet, it doesn't seem to be aware of the problem in the light of some

  Reviews of so-called unconscious support people!

  If someone has this printer works reliably on windows 10 64 - bit

  Please let us know what you were doing. (although the chance that someone with perfect condition watch Forum HP may be low. You are posting and I read this forum because of problems...)

  -How you installed the driver (from which source)

  -which tweaks you did.

  I tried to install the OJ4630_198 and the driver is updated to Windows.

  Windows Update seems to be a little better, but still stuck print jobs are seen after a few

  tests and unnecessary. (Initially because of this apparent initial success, I thought that the problem was limited

  so a PC, but now I think that both PC evenly suffer failure).

  So far, I tried to change the PORT to a fixed TCP/IP address port (which sometimes seems to be feasible: sometimes not.) I was not able to understand why. Maybe the difference between HP driver or Windows update)

  Sometimes after the Ministry of port, the first printing time works, but the

  next print does not work.  It remains in the queue.

  This has been driving me crazy...

  If person not steps forward with the installation of reliable work (10, 64-bit windows), I think I'm going for it back to HP, although the initial cooling period has expired from a legal point of view, I'll see if I can convince the support contact.

  I bought HP printers only over the years. They lasted well and worked like a charm, and the black ink was really nice.

  After that, I can't printers recomment the HP to my friends more.

  TIA

  [Driver in Deskjet 6980 works for printing with capricious 4630]

  Under improved Windows 10, too!

  I checked it after upgrading my PC under Windows 7 64-bit of Windows 10.

  After a few false starts, however, some programs are missing 'Dropbox' "Norton Internet Security" (?)

  sort: I downloaded the binary Moose and once I let the Installer run again, they picked up the proper

  configuration of the previous installation and started running.

  I needed to tweak 'Register windows' but when I tried to run 'regedit' something 'Extended attributes are '.

  inconsistent"and any program that requires administrative privilege would begin: maybe Dropbox and Norton Internet

  Security has failed because of this issue. Surprisingly, I could fix this by restoring the default Windows theme.

  (In my previous attempt to update, I put it to something Bing, a jazzy theme on the Japanese season, or something.

  Affected and surprising finished showing 'Extended attributes are incompatible' (or you may need to

  reset the sound theme as well. YMMV.) I raised this strange questions after the upgrade just in case

  These problems are related to the Deskjet 6980 under Windows 7 64-bit driver installation before upgrading to Windows 10.

  Somehow, however, the previous installation of the driver instance 4630 seems to have disappeared (maybe I deleted it before

  the upgrade, I don't know.) So I install driver 4630 for * SCANNING * purposes only.

  FAX can wait a while.

  Finally, some working environment for Officejet 4630 with using the Deskjet 6980 driver for printing

  is being created.

  TIA

• Problems with games under Windows 7

  Someone knows a problem to start Freecell or Solitare under Windows 7? First of all, I fell into it when I bought a new computer (HP Pavilion Elite). When you play games the screen starts blinking annoying way when the mouse is turned on. I returned the computer at Best Buy and the Geek Squad confirmed my problem using their mouse and the monitor. They exchanged the computer for a computer to identicle who then developed similar problems. This was again confirmed by the Geek Squad. They exchanged this computer for an Asus CG series which now shows similar problems in slightly less (though still annoying). If these simple games wasn't buying intention, they revealed a problem that appears to me as being caused by Windows 7. I had years of experience with these games under Windows Vista with no problems at all.

  Hello
   
  I recommend you to update the display adapter drivers and see if it makes a difference. You must be logged on as administrator to perform these steps. 
   
  1. open Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. in Device Manager, locate the graphics card and then double-click the device name.
  3. click Driver tab, then click on uninstall the driver and follow the instructions.
   
  Restart the computer and let the computer install the generic drivers.
   
  Now, try to follow the link provided to update a hardware driver that is not working properly and check the question below.
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly
   
  If the problem persists then you need to download the latest drivers for card viedeo and install it successfully.
   
  To get the latest drivers, you must contact the manufacturer of your hardware.
   
  If you still experience the problem, then you can create a new user profile.
   
  Steps to create a new user account:
   
  Open user accounts by clicking the Start button, clicking Control Panel, clicking user accounts and family safety, then clicking on user accounts.
  Click on manage another account. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
   
  Click on create a new account.
  Type the name you want to assign to the user account, click an account type, and then click on create an account.
  Now search for the question.
   
  For your reference:
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile 
   
  Thank you, and in what concerns:
  I. Suuresh Kumar-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.