Understand and control the homegroup

Similar Questions

• Can not print and change the homegroup password

  Original title: Windows 7 HomeGroup

  I tried to view and print the homegroup password, but the button would not work.

  Also I tried to change the homegroup password, but the button does not work either.

  I'm trying to connect a wireless device
  "Acer Netbook" to my computer.

  Help, please!

  Hi Moneyman25,

  1 you get an error message when trying to connect a wireless device?

  We recommend that you disable the security temporarily software and check if the problem persists. If you change the password, then change the security settings.
  See turn off the antivirus software

  Note: Be sure to activate security software.

  For your reference:
  1 see where can I find my homegroup password?
  2 see change a homegroup password

  Visit our Microsoft answers feedback Forum and let us know what you think.

• What is the most important difference between 3D Picture control and controlling the display of Simulator

  I want to create a simulation of 3D on the front panel, and I see that we can use a 3D image control or a display of Simulator control. It seems that each of them can be used at the same position. What is the most important difference between 3D Picture control and display of Simulator?

  Hi sfh1,

  You are right, I found examples of Robotics that use 3D photo control and display Simulator control to display a scene 3D on the front panel. After further research, it seems that control the display of Simulator adds additional features compared to the 3D picture control. The control displays Simulator allows the user to right-click control during execution and change the background color, draw fashion, draw contact, view the ID of robot, display sensor data, suspension of service Simulator and reset service Simulator.

  More in depth on these options and the display of control Simulator can be found here:

  http://zone.NI.com/reference/en-XX/help/372983D-01/lvrobogsm/robo_controls_concepts/

  If you would like more information on the picture here 3D control is another resource:

  http://www.NI.com/white-paper/3170/en/#toc2

  Kind regards

• Protect and control the license for ASA with the power of fire

  I had 1 ASA 5515 initially delivered with the software cx, then made room for the software of firepower and got the virtual firesight for 2 devices and license of TAMAS tha L-5515, but this license was told only the URLs and malware license, I thought that this license was for all that since he has no other licenses in the data sheet and it's Reference with more features.

  How can I get the license protect and control now so I can add the asa with the firepower to firesight and apply to all licenses

  Thank you

  Hello

  L ASA5515-TAMAS = SKU license plans to "MALWARE" and "URLFilter" and legally gives the user to updates of the signature "PROTECT + CONTROL". It does not license "PROTECT + CONTROL". You need to buy "ASA5515-CTRL-LIC =" to license "PROTECT + CONTROL".

  Please discuss a case with CISCO GLO, they can help provide a CTRL license

  -DD

• How to use and control the tabs?

  Sorry for such a general question, but I use Firefox with older versions of Mac OS x for years and have just been struck by this brand new and I have no idea on your tabs, "new tab page" etc. Can you just send me some documents so I can understand what they are and how to use them?

  All I see on my headers Ff are all sorts of legs that have no relevance to me, like 'how to stop Firefox from... '. "(twice), a few other symbols Ff and other"tabs"I don't know everything." All the do is filling up a bar line.

  Thank you-

  You are welcome.

  If you have any other questions feel free to ask them.

• and control the YouTube volume scroll bar does not appear in firefox

  I just notice that most of the time I don't get the bar volume control bar /scroll in the page of youtube, it's hidden when I open a video link. I can see cut the scroll bar, but no control of volume or not the button fullscreen. everything looks good in full screenmode only. pls help. I tried to update all the latest plugins available, but it seems something else. Thank you for your help

  It is up to the web pages and Adobe Designer. Flash works in Firefox in the form of application.

• Understand and manage the library.

  Hello!

  I just noticed the "this computer / library with the name ' button in the upper left corner of iTunes.

  I went in "to name library', and what I've seen there is a part of my music (not all my music) is not well organized (some older Genres are in there that I used to have) and some old playlists that I used to have.

  1_ how this music go?

  2_ KESAKO? (The library).

  3_ how I can manage it? (Organize/delete files, etc.)

  1 million thanks!

  Chris.

  If you see this control at the left end of the horizontal bar, which means that there is another computer on your local network that has iTunes home sharing is enabled.  This computer is the choice for the use of the iTunes library on your computer.  Library name is the choice to use the library iTunes shared on the other computer.

  NOTE: If two users are currently connected to the same computer in different user accounts, shared iTunes library could also be in the other user account.

  So, if you select the library name, you see songs in the iTunes library.  One who uses this computer put the songs in the iTunes library and it manages.

• Understand and improve the absolute accuracy

  Many sculptures absolute accuracy calculated the computation of absolute precision in the manuals of the user for the use of modules in series C the following entries:

  • TempChangeFromLastExternalCal = 70 * C
  
  
  • TempChangeFromLastInternalCal = 1 * C
  
  
  • Sigma/Std-dev = 3
  
  
  • # of samples = 100

  I have a few questions about these two values listed above TempChange

  1. Why such a low value of only 1 has the TempChangeFromLastInternalCal * C; modules are continually doing internal calibration automatically?
  
  
  2. Regarding TempChangeFromLastExternalCal, I read correctly that NEITHER is the calculation of accuracy, assuming that the material has seen a +/-70 * C delta temperature since the last time it was calibrated externally. that is calibrated to 25 * C, but runs at 95 * C?

  To improve the absolute accuracy, I'm curious to know if the following two statements would improve accuracy:

  1. The material exists in an environment temperature controlled with a + / delta 10 * C ambient temperature. Can I use the value of 10 for TempChangeFromLastExternalCal if it has been calibrated at room temperature outside?
  
  
  2. If I'm short so HAVE them + HAVE terminals and a channel not used by COM and the extent to which results can be subratcted of readings of all other channels, I essentially elimited the error of the formula of absolute precision shifting?

  For completeness, for absolute accuracy formulas are:

  Absolute accuracy = ± (VoltageReading * GainError + VoltageRange * OffsetError + NoiseUncertainity)
  GainError = ResidualAIGainError + GainTempco * TempChangeFromLastInternalCal + ReferenceTempco * TempChangeFromLastExternalCal
  OffsetError = ResidualAIOffsetError + OffsetTempco * TempChangeFromLastInternalCal + INL_Error
  NoiseUncertainity = (RandomNoise * sigma) /(# of samples)

  Hey Sean,

  Change in temperature refers to the temperature difference from the last time that you did these two calibrations and the current temperature unit. So if you did an internal and external calibration at 25 ° C, then you will find the difference between the current temperature and 25 ° C. This is valid for two years for external calibration (according to the data sheet) to answer your questions:

  (1) If you both internal as external calibrated at 25 ° c, and then assign TempChange 1 ° C if the environment is in a summer of 24 or 26 ° C.

  (2) if the room was 10 ° C when the measurement has been taken, both internal and external TempChanges is 15 ° C (because your calibration conducted at 25 ° C).

  (3) If you were doing an internal calibration at 10 ° C, then your internal TempChange would be 0 ° C and your external would be 15 ° C.

  Regarding tips, I do not have too. The best I can suggest is to use a lower range and a device that has a lower production, but I don't think that it would be viable for your application. The best try of course is calibrated as close as possible to the more uniform temperature.

  I found a VI that calculates the absolute accuracy of a device. Must be a lot of values, but it allows you to play with the values to see what you can afford. My calculations show you in your range, but be absolutely sure of these fluctuations.

  https://decibel.NI.com/content/docs/doc-9912

  Attached a photo of the values that I used to get this error. I'm sure that the devices are calibrated at 23 ° C. Here's the manual where I found the numbers that I used.

  http://www.NI.com/PDF/manuals/374231c.PDF

  Sorry for the confusion earlier, I hope that this post clears up a lot of information and if it's not please let me know.

  -KP

• Strange behavior when using units and controls the ring

  Hello

  Something unexpected occurs when you use a control of the ring with units:

  1. Create the control of the ring,
  2. change the representation of double
  3. display unit label,
  4. the value of mV as a unit,
  5. edit items
     1. disable the sequential values,
     2. Add an element with a value other than zero for example 123,
     3. Ok
  6. Select the value created,
  7. create a KPI DBL with V as unit,
  8. wire from the control to the indicator,
  9. run

  What I see in the indicator is 123 V instead of the expected 0,123 V

  You guys are able to reproduce this?

  Noticed on LabVIEW 2013 and 2014, 32 and 64 bit on Windows 7 and 8.1

  Thank you

  Boris

  Bring up the digital display of the command of the ring.  You will see the units you enter under edit items menu is indeed volts.  Any prefix to units only acts on the screen.

• unmute and control the sound level

  How can I manage Mute on and off control?

  R.Click the speaker of the clock, select playback devices, locate materials, properties, change... In addition, most

  keyboards have this function.

• TMS server and control the VCS

  Hello

  We have a customer's request if they can change the usename (admin) of control VCS in the TMS server. They don't want to purge the VCS of TMS server control, because they still need all the TMS Server historical reports. Basiaclly, they won't use the username: admin more to managing TMS server. They can create another account in the control of VCS with admnin rights, but how they change in the SMT server without purge from the TMS server.

  In the server of TMS, the VCS control connections tab, there is a place to change the password. but no place the username change.

  TMS software version: 13.1.2

  VCS Control version: 7.0.1

  Note: I noticed that this option is available on the server SMT version 14.2.

  Thank you

  Kind regards

  Chris

  Hello

  Using a different name that 'admin' to manage the VCS was introduced in TMS 14.1 (CSCuc88048). Not even bleed and add will help them, I'm afraid!

  Your client is upgraded if they want to use a different user name.

  Kind regards

  Kjetil

• Agilent 34461 to read? and controls the measure

  Hi all

  At the present time, I have some writing using LabView.  I'm followed certain current over time until that breaks the device, and everything works like I want it.

  I have my code setup so that the measure command is sent every x seconds (a variable which can be set) in a while loop.  I was wondering if there is a way to have it constantly measure and then I read only the current every x seconds.  The reason why I ask is because whenever this command is sent, you can hear the relay of Agilent clicking when it is triggering, and if I send you this command every second, they can be hard on equipment.

  Is there a way to always measure as when it is not in remote mode?  Can I use the reading? order to get read the current?

  I don't expect everyone should become familiar with this instrument, of course.  As I am new to LabView, I was wondering if this is possible (maybe even to other pieces of equipment).

  Thank you, Natalie

  I'm sure that you are looking for something like this

  

• How to click a clip from movie and control the scenario of the clip another?

  Code on the main timeline in Adobe animate:

  This.Stop ();

  createjs. Touch.Enable (internship);

  this.clipOne.on ("click", function() {}

  clipTwo.gotoAndPlay ("AnotherFrameLocation");

  });

  Just trying to figure the right scope to manipulate the other clips.  Basically, click on the clip it and move to another frame clip two.

  Any help would be appreciated.

  I would like to have the separate function, to make it a little easier to read. clipOne and clipTwo are the two children of the first 'this', but once you are inside a function 'this' becomes the function itself. If you set a variable to remember of the parent. This would work:

  var self = this;

  this.clipOne.on ("click", advanceTwo);

  function advanceTwo() {}

  self.clipTwo.gotoAndPlay ("AnotherLocation :);

  }

• suggest how to display content and control the printing of the content

  Hi all
  H6.
  FORMS 6i worm
  H5.
  There is a button to display in my form, when the user clicks on the button display the content in the form are displayed in a letter format.
  H5.
  the displayed content must be able to print only if the value of the status field is APPROVED.
  H5.
  In all the other status as NEW or CANCEL, user is authorized to view the content in letter size, but should not take print out of the content.
  H5.
  I tried to use reports but not able to manage the "print" key.
  
  H5.
  Please suggest and guide
  
  Valuable suggestions will be appreciated ;)
  
  Thank you
  {: 8}

  Have you tried the code above provided it will disable the PRINT on the report viewer DISABLEPRINT button is hidden parameter integrated Oracle to report

  Add_Parameter (pl_id, 'DISABLEPRINT', TEXT_PARAMETER, 'YES');

• I have problems to access the homegroup on one of my computers networked

  I can't access the homegroup on one of my computers networked: I can't view/print the password or leave the homegroup.

  The homegroup listener service is not running and does not start; It depends on the Server service which does not also.

  All the services depends on "Server" are running, while I find not all controls bound to the drivers SMB or srvnet.

  The error message when the Server service or the HomeGroup listener is tempted to start is:
  Error 1068: The dependency service or group could start.

  Thank you very much, Jack MVP.  I downloaded and installed ServiWin as directed by your recommendation.

  It showed me that the server SMB 1. XXX driver (srv.sys) was not working.  I then used the 'Google - executable name' search option from right-click menu.

  This showed me in turn to the web page of "http://support.microsoft.com/kb/2473205" entitled: "list of currently available patches for technologies in Windows Server 2008 and Windows Server 2008 R2 file Services.

  In this page, I found a section entitled SRV component with a link to the article 2625434 knowledge base: "http://support.microsoft.com/hotfix/KBHotfix.aspx?kbnum=2625434&kbln=en-us."

  This allowed me to download an a security update that contains the latest version of the srv.sys.  Installation of this repaired my faulty installation of the SMB 1. XXX driver.

  This then allowed me to do things like "View the HomeGroup Password" and "Leave the HomeGroup" that I couldn't do before.

  I was then able to join the homegroup, and after restarting, become visible to my laptop.

  I then told the phone leaving the homegroup and then join and now computers are visible to each other.

  All Windows 7 computers on my home network are now visible to the other in the homegroup.