Unfortunately, he stopped measuring.

Similar Questions

• Unfortunately he stopped cards

  Hello

  Just received yesterday the smartwatch 3.

  I have huge problems where he continues to say unfortunately "never stopped cards" which is what makes it next to useless!

  Smartwatch software 3 4.4W2

  Version of Android on samsung galaxy s4 - 4.4.2

  Can someone advise until this value is returned?!

  Thank you

  reset the phone to default settings then the watch.

  updated the phone to all the most recent and connected the watch

  do not get the error now!

  shame on the phone had to be reset! -surely is not supposed to be the way!

  with regard to the software of the watch this updated itself to the version 5 - don't know why! -before he told me that there was no update!

  I do not know you are buying of things should not be so problematic.

  now just to figure out how to use the bits of the voice and music!

• "Unfortunately not stopped Walkman"

  Two days back so much software system walkman has updated, unfortunately, from today 24.10.2014, its not working not at all, tried all the eligible techniques such as reboot, force stop walkman, or the phone in safe mode.

  Not imporovement, is not woring at all, please help.

  Serge pacome

  Uninstall the updates for walkman, it should correct the problem.

• Hello, could someone tell me how to install Photoshop, Lightroom and first? I had a subscription to Adobe and installed all three versions on my new Lenovo Erazer 510 which, unfortunately, has stopped working after only 15 days. The device

  Good evening , someone pourrait inform me How to install Photoshop, Lightroom and first? I bought a subscription Adobe and installed all three versions on my new Lenovo ERazer 510 which, unfortunately stopped working after only 15 days. Le device has been in service for forty days and I do not know How do I reinstall your applications. I tried by my Adobe account, but without results. Thank you.

  These FAQS should help you:

  FAQ: How to download and install the Adobe Creative Cloud Desktop App?

  FAQ: How to download and install creative cloud applications?

  FAQ: How to launch creative Cloud Apps

• Unfortunately he stopped app

  Watched, I tried a few things, cant re build app that is currently on playstore. Used to work, not now!

  Appreciate tips, see you soon.

  config. XML

  <? XML version = "1.0" encoding = "UTF-8"? >

  < widget xmlns = " " http://www.w3.org/ns/widgets "

  xmlns:gap = " " http://PhoneGap.com/ns/1.0 "

  ID = "blah".

  versionCode = "06."

  version = "3.0.2" >

  < name > blah < / name >

  < description >

  Bla

  < / description >

  " < author href = ' http://bla.com "email =" " [email protected] "> "

  Dev Team

  < / author >

  " < = function name" http://API.PhoneGap.com/1.0/device "/ > "

  < name of option = "phonegap-version" value = "cli - 5.2.0" / >

  < name of option = "orientation" value = "landscape" / >

  < name of option = "target device" value = "universal" / >

  < name of option = "full screen" value = "true" / >

  < name of the ditch: plugin = "cordova-plugin-network-information" source = "MNP" / >

  < name of the ditch: plugin = "cordova-plugin-splashscreen" source = "MNP" / >

  < name of the ditch: plugin = "cordova-plugin-media" source = "MNP" / >

  < name of option = "SplashScreen" value = "screen" / >

  < name of option = "AutoHideSplashScreen" value = "false" / >

  < name of option = "SplashScreenDelay" value = "3000" / >

  < name of option = "SplashMaintainAspectRatio" value = "true" / >

  < name of option = "ShowSplashScreenSpinner" value = "false" / >

  < name of option = "FadeSplashScreen" value = "true" / >

  < name of option = "FadeSplashScreenDuration" value = "1.0" / >

  < src = "icon.png icon" / > "

  "< src="res/icon/android/icon-36-ldpi.png icon "gap: Platform = 'android' gap: density ="ldpi"/ >

  "< src="res/icon/android/icon-48-mdpi.png icon "gap: Platform = 'android' gap: density ="mdpi"/ >

  "< src="res/icon/android/icon-72-hdpi.png icon "gap: Platform = 'android' gap: density ="hdpi"/ >

  "< src="res/icon/android/icon-96-xhdpi.png icon "gap: Platform = 'android' gap: density ="xhdpi"/ >

  "< src="res/icon/blackberry/icon80.png icon "gap: platform ="blackberry"/ >

  "< src="res/icon/blackberry/icon80.png icon "gap: platform ="blackberry"gap: state ="high"/ >

  "< src="res/icon/ios/icon-57.png icon "gap: platform ="ios"width ="57"height ="57"/ >

  "< icon src="res/icon/ios/icon-72.png "gap: platform ="ios"width ="72"height ="72"/ >

  "< src="res/icon/ios/icon-57-2x.png icon "gap: platform ="ios"width ="114"height ="114"/ >

  "< src="res/icon/ios/icon-72-2x.png icon "gap: platform ="ios"width ="144"height ="144"/ >

  "< src="res/icon/webos/icon-64.png icon "gap: platform ="webos"/ >

  "< src="res/icon/windows-phone/icon-48.png icon "gap: platform ="winphone"/ >

  "< src="res/icon/windows-phone/icon-173.png icon "gap: Platform = 'winphone" gap: role = "background" / >

  "< src="res/screen/android/screen-ldpi-landscape.png gap: splash "gap: Platform = 'android' gap: density ="ldpi"/ >

  "< src="res/screen/android/screen-mdpi-landscape.png gap: splash "gap: Platform = 'android' gap: density ="mdpi"/ >

  "< src="res/screen/android/screen-hdpi-landscape.png gap: splash "gap: Platform = 'android' gap: density ="hdpi"/ >

  "< src="res/screen/android/screen-xhdpi-landscape.png gap: splash "gap: Platform = 'android' gap: density ="xhdpi"/ >

  "< src="res/screen/blackberry/screen225.png gap: splash "gap: platform ="blackberry"/ >

  "< src="res/screen/ios/screen-iphone-portrait.png gap: splash "gap: platform ="ios"width ="320"height ="480"/ >

  "< src="res/screen/ios/screen-iphone-portrait-2x.png gap: splash "gap: platform ="ios"width ="640"height ="960"/ >

  "< src="res/screen/ios/screen-ipad-portrait.png gap: splash "gap: platform ="ios"width ="768"height ="1024"/ >

  "< src="res/screen/ios/screen-ipad-landscape.png gap: splash "gap: platform ="ios"width ="1024"height ="768"/ >

  "< src="res/screen/windows-phone/screen-portrait.jpg gap: splash "gap: platform ="winphone"/ >

  < src = "" icon.png gap: splash "/ >"

  < name of the ditch: plugin = "cordova-plugin-whitelist" source = "MNP" / >

  <! - allow links to open in a browser - >

  " < allow intention href = ' https://m.bla.co.nz/ * " />

  <! - don't block any request - >

  < access origin = "" * "/ >"

  " < access origin = ' http://bla.com " />

  < / widget >

  First thoughts:

  (1) you're not pin your plugins up to a specific version number. I suggest you do so; This can lead to different behavior between versions when new versions of the plugin are available (especially if a plugin is new).

  (2) is there something in the newspapers of your device? (adb logcat) There is much info connected there, and we have almost all of it is useless, but look around the time that the error message is displayed on the screen. Then see if there are messages from interesting paper from the same interval of time. If so, please post them here.

• AT300 camera stopped

  I just got a new AT300 after the last sent a return because the SD slot closed the card, now I find that when I try to use the camera that he told me that "Unfortunately he stopped", it is a known software problem that can be fixed or I have to send it back as well?

  Hello

  I recommend that you set your default Android system.
  Then test the camera by using the default webcam application.

  If you will still not be able to use it, get in touch with service in your country.

• Gallery stops.

  Hi, I recently had problems with the Album, and recently I mean 10 minutes ago. When I open it, stay on for a second and then it ends with the message "Unfortunately Album stopped." Like what is happening with this? Thank you.

  Note: I am sure that I do not have the virus.

  remove the two apps > reboots the phone > check again.

• BlackBerry Q5 unfortunately, Skype has ceased.

  I searched the forums for "Unfortunately Skype" and nothing came. If I'm writing this in case someone is facing a similar problem in the future.

  Skype keep you giving an error message that says: "Unfortunately, Skype stopped? Have you recently upgraded version of BB10? You probably just need to uninstall Skype, reboot and reinstall Skype. This should solve the problem.

  1. press and hold the Skype icon until it vibrates with a small icon to the trash.

  2. press on the icon to the trash.

  3. press to confirm.

  4 press and hold the button at the top of your phone until the countdown-to-powerdown. You should see an icon to restart at the bottom right of the screen.

  5. press the reboot icon and wait for the phone to reboot.

  6 reinstall Skype. It should work now. It could be a more recent version that you have to use, but it will give you a quick description to readapt.

• I need the firmware for the Toshiba excited AT7 B618

  Hello

  The Tablet keeps showing a message

  Unfortunately, it stopped secret lock

  Ok

  When I press OK it comes again.

  I fact (power + key) factory reset, but it does not solve the problem.

  I installed antivirus it found 7 threats, but he did not remove it because it becomes the vendor applications. Viruses that are present in the backup.

  I need the firmware image to excite at7 - B? Please reply with the download link.
  
  Device name: AT7-B618
  Unit number: PDA0HV-002004AR
  Product group: TOSHIBA

  Best regards
  Department of health Shair
  
  Thank you
  

  I have the same problem, why not support a large company like toshiba product, why I can not download a firmware for AT7-B618?

  Please I need this firmware
  Best regards

• Where can I view the tutorials mentioned in Iphoto and IDVD help. Need me Internet on the Apple site and they aren't there.

  Whenever I'm using IPhoto or IDVD he mentions tutorials to watch. When I click on it need me on the Apple site and there is no mention of them on the site. How to see the tutorials?

  Unfortunately, Apple stopped manufacturing and shipping iDVD 5 years ago and even with iPhoto, last year, it seems that these videos are deleted.

  There are a load of stuff on the site like YouTube and Vimeo, so I would start there.

• HP Envy 4500 will not print computer

  Hello

  My HP Envy 4500 works perfectly for some time now.  Unfortunately, it stopped printing from my Dell laptop, running Windows7. It scans to the laptop very well.  It copies fine, and it prints from my iPhone fine.

  I've reviewed a ton of messages and tried many things:

  * Uninstall/reinstall wireless (at least 8 times) - via the website https://123.hpconnected.com/activate/woobe/ENVY4500

  * Uninstall/reinstall via USB

  * ran doctor utility printing/scanning (or whatever it's called) and says it all looks very good

  sending a test with a HP tool page is fine, however, the internal test via the tool HP Print page fails

  I'm losing my mind and would be really grateful for the help.

  Thank you!

  Hey @JNZM,

  Thanks for getting back to me on this subject. Normally, I get a notification email indicating that you had replied to a post that we are working on. In this case, I never had an email, so I just found this post unanswered today. Normally I answer as soon as I come into the office. I have some more tricks up my sleeve that we can try to solve the printing problem you feel. Can I please have you follow the steps below to load another driver on your machine and test print.

  1. Click on the Start menu
  2. Select the devices and printers
  3. In the devices and printers folder right click on your HP Envy 4500 and left click on printer properties.
  4. Left click on the Advanced tab
  5. Left-click on new driver
  6. When the new driver window just press 'Next' until you see a list of manufacturers on the left and a list of Printers on the right.
  7. Select HP as the manufacturer on the left
  8. DeskJet 6980 select the printer on the right. If Deskjet 6980 does appear to only select "Windows Update" at the bottom left and once the update is completed, you will be able to select Deskjet 6980.
  9. After selecting Deskjet 6980 hit Next to complete the wizard driver new
  10. Under the printer properties window, select "Apply", but don't hit not OK
  11. Select the general tab
  12. Rename your HP Envy 4500 printer
      
  13. Click OK
  14. Finally, right click on your HP Envy 4500 one more time and click on Printing Preferences
  15. Left click on the paper/quality tab
  16. Left click on the drop down menu 'Normal' for quality printing at the bottom right and change its normal fast
  17. Press apply and OK

  Now that the other driver has been installed, test printing from your Windows 7 computer again.

  Please let me know if this procedure works for you. Good luck!

• Bug...

  Everytime I open security settings... He said: "Unfortunately, he stopped settings «...»» When I want to uninstall any application the phone even force restart with clear data...

  Not how my phone works (Lollipop 5.1). Looks like a hardware problem.

• Z2 Vibe Pro - Microsoft Exchange problem

  Hi, I experience problems with my new Vibe Z2 Pro when connecting to my Microsoft Exchange business. My company requires the use of the client certificate for the connection, I imported the certificate successfully, but when the Email application trying to connect to the server, he said unfortunately "not stopped keychain". All this experience? Any possible solution?

  
  

• signal generation

  Good evening

  I am trying to generate an output voltage and I am facing some problems. I am using an analog input voltage NI 9263 module, I have two sons (AO0 and COM) connected to the terminals positive and negative a BNC connector; I want to generate an alternating voltage, 60 Hz and amplitude of 1 to 5 V. Unfortunately what I measured with a multimeter is something always scaling, for example: if I generate a signal of amplitude 1 I measure 0.7 volt, if the signal is amplitude 2 to I measure 1.4 and so on. I would like to know if some of calibration is required or there are potential errors in what I do.

  Thank you.

  Sorry, but am not at all in agreement with this response.

  A BNC connector has no impedance any of its own. The output impedance of a signal generator is determined by the circuit, not by the type of connector.

  Anyway, even if the output of the circuit impedance is 50 ohms, it is not the reason for your reading. The mulitmeters input impedance is high enough does not create a voltage with an output drop rather low impedance. The reason is probably the difference between a peak to peak of current voltage alternating (AC) and the RMS value. In your case, probably the software defines a range of crete and an RMS value is measured by the meter. The effective value is always the peak divided by (root of 2) value.

  See also

  http://86.43.94.97/moodlecp9a/mod/glossary/showentry.php?CourseID=1&concept=RMS+voltage

• executable file does not run subgroups

  Hi all!

  I have to write a labview program that runs several screws according to what the user wants. Thus, in order to test different screws if something goes wrong, that I built a managed event structure with a controller of the tab. Each tab has a secondary that points to a VI that I need control of the main panel, once the application is running. Everything goes perfectly until I build the executable when everything is loaded by hand, but I can't control anything! (I continue to press the buttons, but they do not activate anything). All the buttons of an event in my control structure (measures DC motor, Records control, stop measures, etc.)

  In the attached picture, there is an example with my VI which controls a power supply for a motor continuous. This is supposed to be controlled by the button 'Set of tension' and every time you click this button the user can simply update the voltage until they are satisfied. However, despite the fact that everything works in the main labview VI, the executable file does nothing!

  No idea what I would be missing / doing wrong? How are we supposed to use supPannels in order to work in an executable file?

  Thanks for any help anyone can provide!

  simm01

  The compiler does not include in this context, the way constants. You will need to 'always include' in construction, or replace them with a static ref VI, in which case they will automatically be included in the compilation.
  /Y