Unified_Audit_Trail fails to audit connection failures

Similar Questions

• my widget browser continues to feed widget showing 'failed' and keeps saying ' failure widget feed and be sure that you are connected to the internet "when I'm connected to the internet. How can I fix it?

  my widget browser continues to feed widget showing 'failed' and keeps saying ' failure widget feed and be sure that you are connected to the internet "when I'm connected to the internet. How can I fix it?

  Widget Browser disappeared.  Adobe pulled the plug on this subject quite earlier.

  See that this related discussion from earlier today.

  Widgets a go go

  Nancy O.

• Recording connection failure attempts

  Someone at - he found a way to get information about connection attempts that have failed where people enter the wrong username/password name? We use the secure gateway and I enabled database. I looked through the database but couldn't find anything by recording connection attempts that failed.

  Hello

  Unfortunately, vWorkspace do not keep track of connection failures, you need a product that collects this information from the event log and stores them for you to review later as Administrator Active or change auditor for Active Directory.

• ISE max connection failures

  In ISE, is - anyone know if the tally for the failures of maximum connection for accounts invited (found under settings > comments > political portal page) is one per session or cumulative setting during the lifetime of the account? The County never resets and is there a way to display the current number of connections that have failed?

  Our use case, is that we have guest accounts that distributed to multiple hosts (for example for a hosted conference or special event). We had a couple of this type of accounts get suspended because of hitting max connection failures. We have increased the adjustment, but I would like to understand the parameters more has some of the guest accounts must apply to a significant period of time.

  This is per session, when logged in successfully, the counter is reset.

• How to turn off the message waiting after a connection failure?

  Hello

  I'm testing a new login process. Sometimes, I can not connect due to bugs in my procedures.

  
  

  On the login screen, there is a connection message that makes you wait 5, 10, 15 seconds etc after a connection failure.

  
  

  I don't want no waiting to connect again.

  
  

  I use APEX 5.0.3 with Oracle 11 GR 2
  

  
  

  Best regards.
  

  The connection limit is to reduce the risk of denial of service attacks, and therefore it is not recommended to disable this feature.

  That being said, you can turn off the countdown to the instance level and not at the level of the application.  Connect to Oracle Application Express Administration Services. Click manage an Instance from the drop-down list level, and then select Security. Click on the authentication tab, and then under global settings, to 'delay after connection attempts that failed in a few seconds', enter 0 to disable the countdown and allow immediate access.

• ViewPlanner fails when the "Connect-Start-workload.

  Hello

  I am working on installing a reference ViewPlanner, ViewPlanner 3.5 environment local.

  I created the Office of the GoldenRDSH and the Viewplanner device, without AD.

  I used Windows 7 32 bit under my desk and Office installed (2010..) and all the necessary applications and tools.

  Managed to do the check option, and there is no problems/errors.

  However, when I do the execution phase, it fails on the "Connect-Start-workload.

  Attached, the screenshots of the desktop and web appliance GUI.

  

  The journal of Viewplanner.txt of the device:

  15/06/17 09: 12:30, 160 INFO Matching VM control & Mgmt-Perf with prefix: GoldenRDSH

  2015-06-17 09:12:30, 160 INFO Matching VM GoldenRDSH with prefix: GoldenRDSH

  2015-06-17 09:12:30, 161 INFO VM GoldenRDSH matched with prefix: GoldenRDSH

  2015-06-17 09:12:30, 161 VMs Office INFO found: ["GoldenRDSH"]

  2015 06-17 09:12:30, INFO 161 loading AD Info to data structures is done with adinfo: [{'schedlist': zero, the 'Protocol': 0 L, "name": "ssss", "wrk_FK": "QuickWordTest_1i", "poolname": ", 'grp_id': 11 L,"extrainfo": zero, 'percentage': 100 L, 'connections_per_client': 1 L, 'deskvms': ['GoldenRDSH'], 'rdshtype': 0 L, 'workprofile': {'IEbpm': 1 L, 'ARbpm': 1 L, 'Thinktime': 5 L,"extrainfo": zero, 'name':"QuickWordTest_1i"}}] [{{, 'hosttime': 1, 'random': 1, 'iterations': 1 L, 'OMP': 60 L, 'video':-1 L, "applist": "WORD"}, "clientprefix": "}]

  2015-06-17 09:12:30, 164 DEBUG get the configuration option monitor_control.pseudo_perfctr in VM GoldenRDSH

  2015-06-17 09:12:30, 184 INFO the value of the performance counter for VM GoldenRDSH: true

  2015-06-17 09:12:30, 184 INFO updated 1 desktop VMs

  2015-06-17 09:12:30, INFO 184 turn on VMs in the Scott/ad group: ["GoldenRDSH"]

  2015-06-17 09:12:30, 185 DEBUG turn on/off the VM: GoldenRDSH

  2015-06-17 09:12:30, 188 DEBUG VM GoldenRDSH is powered. Restart the virtual machine.

  2015-06-17 09:12:31, 250 INFO Operation: poweron_desktops, start time: Wednesday 17 June at 09:12:30 2015, Total time taken: 4.31

  2015-06-17 09:12:31, 251 INFO-

  2015 06-17 09:12:31, INFO 251 waiting for the number of virtual machines for you register

  2015-06-17 09:12:31, 251 INFO-

  2015-06-17 09:12:34, 860 DEBUG returning to the current state: 0 with status message: [IP recorded: 0] [the workload began on machines 0] [Uploaded results-> desktop: 0 (0 errors)]

  2015-06-17 09:12:50, 327 new customer INFO entry: 10.11.19.165

  2015-06-17 09:12:50, 328 registered current INFO status machines: [required servers: 1] [server: 0]

  2015 06-17 09:15:50, 328 INFO analysis all virtual machines for all required patches.

  2015-06-17 09:15:50, 328 INFO receives the IP address for the computer virtual GoldenRDSH vCenter

  2015-06-17 09:15:50, 340 INFO Got, the IP address for the virtual GoldenRDSH computer: 10.11.19.165

  2015-06-17 09:15:50, 341 INFO makes the analysis of the virtual machines.

  2015 06-17 09:18:50, 342 INFO analysis all virtual machines for all required patches.

  2015-06-17 09:18:50, 342 INFO makes the analysis of the virtual machines.

  2015 06-17 09:21:50, 426 DEBUG, there could be problems with the following virtual machines in this run (check vCenter Console to search for errors). Continue the race with other virtual machines.

  2015-06-17 09:21:50, 427 INFO receives the IP address for the computer virtual GoldenRDSH vCenter

  2015-06-17 09:21:50, 443 INFO Got, the IP address for the virtual GoldenRDSH computer: 10.11.19.165

  2015-06-17 09:21:50, 443 DEBUG IP: 10.11.19.165-> name: GoldenRDSH

  2015-06-17 09:21:50, 444 INFO Running query: SELECT * from hostinfo where IPADDR = "10.11.19.165."

  2015-06-17 09:21:50, 445 INFO Running query: UPDATE SET is_Client = '0' hostinfo, State is 'Unpaired', name = 'GoldenRDSH' where IPADDR = "10.11.19.165."

  2015-06-17 09:21:50, 452 INFO registration remaining VMs.

  2015-06-17 09:21:50, 452 INFO reached threshold number of machines. From the reference plane.

  2015-06-17 09:21:50, 452 INFO waiting for virtual machines to settle; sleep for the rise time.

  2015-06-17 09:22:20, 490 INFO Running query: INSERT INTO testinfo (test_name, ClientIP_FK, ServerIP_FK, Protocol, username, password, test_state, start_time, type) values ('1', '10.11.19.165', '10.11.19.165', 'NA', 'ssss_1', "passw0rd", "waiting", "2015-06-17 09:22:20", 0)

  2015-06-17 09:22:20, 495 INFO Running query: SELECT * from testinfo where testname = '1' and test_state = 'pending' and ClientIP_FK = '10.11.19.165' and ServerIP_FK = username and "10.11.19.165" = "ssss_1."

  2015-06-17 09:22:20, 505 DEBUG begins to gather its periodic vCenter stats...

  2015-06-17 09:22:26, 220 INFO-

  2015-06-17 09:22:26, 221 INFO launch the execution plan for the run profile

  2015-06-17 09:22:26, 222 INFO-

  2015-06-17 09:22:26, 222 INFO from the local workload for virtual desktops.

  2015-06-17 09:22:26, 223 INFO Unmapping default data on the 10.11.19.165 virtual machine folders

  2015-06-17 09:22:26, 223 INFO Running query: SELECT * from testinfo where ServerIP_FK = '10.11.19.165' and test_state = 'waiting '.

  2015 06-17 09:22:26, 225 INFO the id of the test server is 4

  2015-06-17 09:22:26, 225 INFO Running query: UPDATE hostinfo SET state = 'Busy' where IPADDR = "10.11.19.165."

  2015-06-17 09:22:26, 235 INFO Running query: UPDATE testinfo test_name = "1" SET, Protocol is "NA" of user name = "ssss_1" password = "passw0rd", test_state = "Running", start_time = '2015-06-17 09:22:20 "where test_id = 4

  2015-06-17 09:22:26, 236 INFO Pushing workload from the virtual machine configuration: 10.11.19.165

  2015-06-17 09:22:26, 237 INFO running commands remotely with arguments: server: 10.11.19.165, test_name: 1

  2015-06-17 09:22:26, 237 callback function to add INFORMATION for the remote root object for IP address: 10.11.19.165

  2015-06-17 09:22:27, 085 adding INFO reminder for the command startWorkload on the 10.11.19.165 Server

  2015-06-17 09:22:27, 115 WARNING remote call failed: [failure instance: traceback to remote host - Traceback unavailable]

  ]

  Error unhandled offline:

  Unhandled error

  The remote host - unavailable Traceback traceback

  2015-06-17 09:22:30, 119 configuration workload of INFORMATION sent to group: ssss

  You will appreciate your help.

  Thank you

  Guy

  It seems that the ViewPlanner agent is installed incorrectly.

  There are two packs zip for Agent of VP (1) for desktop PC (2) to the client.

  It seems that this client package is installed in the office instead of an office. You can install the agent desktop of VP and try again?

• Connection failure: unknown username or bad password

  I use Thunderbird without problem for businesses for nearly eight years. I currently run at the top of a tower with Windows 7 Pro. There is only a single account/e-mail address on Thunderbird.

  This morning when I went to check my e-mail I have my password is requested, then received the error 'sending of password did not. Mail server exchange.company.com replied: connection failure: unknown username or bad password. "I retried the password, restart Thunderbird and tried again, but still not received the same error. I sent an email from Thunderbird test which was very good. I am also able to connect to the server via web browser and I am able to send and receive emails on my mobile device.

  I erased all the saved passwords of Thunderbird and I checked account settings, but I am still unable to download any email Thunderbird.

  Apart from the deletion of the account, I don't really know what to do here. Any help would be appreciated! Thank you.

  The problem has been resolved. Apparently the POP stack had to be reset by the side of the Exchange.

  I hope this helps someone in the future...

• ERROR: Connection failure: unknown username or bad password

  Whenever I want too run a .exe field or a program that requires administrative permissions, I type my password using the account control user, but instead of just let me through it come up with this error:

  Connection failure: unknown username or bad password.

  I searched for fixes, but have not found one that works.

  This was a very big problem I am a player computer and all the games I have, have the administrative sign (shield) and or are .exe files.

  This has happened for about 3 or 4 months now... It really gets me upset. Since there is no way to shut off User Account Control (UAC) without opening UAC itself...

  I'm running on a:

  Manufacturer: Acer
  Model: Aspire M1201
  : Processor Dual-Core AMD (tm) 8550 2.20 GHz
  Memory (RAM live): 3.00 GB
  System type: 32-bit operating system

  http://www.Petri.co.il/disable_uac_in_windows_vista.htm

  Read method 1.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows 7 professional - connection failure: unknown username or bad password.

  I have new xps computers 8700 identical Dell running windows 7 Professional.  The new dells replace the old dell dimension computers Windows XP Edition Professional.  I traced a drive 'f:' of network easily to my server from windows 2000 of the first Windows 7 Professional machine.  But when I tried to map the "f:" network drive on my windows 2000 Professional 2nd new windows machine Server 7 I got the following message: "connection failure: unknown username or bad password."  The computers are identical.  After the introduction of the first professional machine of windows 7 with success and mapping the drive "f:" on my server, I cloned the drive hard so that all my apps and settings would be the same on the second Professional machine of windows 7.   I tried to change the 2nd windows 7 professional name of the computer, but I still regularly get the "connection failure: unknown username or bad password."  Any ideas or suggestions would be greatly appreciated.

  Thanks in advance,

  Ken Preston

  Hello Ken,

  Thanks for posting your question on the forum of the Microsoft community.

  The issue you mentioned will be better suited for the public of professionals on the TechNet forums.

  I would recommend posting your query in the TechNet Forums.
   
  TechNet Forum
  http://social.technet.Microsoft.com/forums/en-us/home?category=w7itpro

  Thank you

• Unable to connect to a Samba file server. error "the connection failure: unknown username or bad password?"

  Original title: I can't connect to a server to Samba from Windows 7 files

  I used to use a Mac machine to connect to a file server Samba as smb://myfileserver.mycompany. Now I use a PC with Windows 7 Professional and when I write the address on Explorer as \\myfileserver.mycompany it opens a pop-up to enter my credentials, but when I put my authentication information and click ok, it reminds me the pop-up to try again with a message stating "connection failure: unknown username or bad password.'. '.

  I tried several times but still the same result.

  Is there another way to do this?

  Is there a third party app that will do this job?

  Thank you.

  Hello

  (1) is the computer connected to the domain?

  (2) is the issue specific to your username and password?

  (3) tried to connect from different computer?

  If the problem is specific to your username and password please contact the it Department for assistance.

• Browsing databases of Virtual Center failed: could not connect to server NFC, can any body help me how to solve this problem please

  Browsing databases of Virtual Center failed: could not connect to server NFC, can any body help me how to solve this problem please

  Hi Mallik7, please try the following steps, you must succeed to solve the problem.

  To connect a client to vCenter directly to the ESX host error-free work.

  Files/etc/vmware/config the ESX host contain the lines:

  ------------------------------------

  authd.soapServer = 'TRUE '.

  prefvmx.consolidateDeleteNFSLocks = "TRUE" authd.proxy.vpxa - nfc = "vmware - vpxa:vpxa - nfc.

  Authd.proxy.vpxa - nfcssl = ' vmware - vpxa:vpxa - nfcssl.

  ------------------------------------

  This problem occurs when a carriage return is missing from/etc/vmware/config. To resolve this issue, go to edit/etc/vmware/config:

  1 make a backup of this file from the path - / etc/vmware/config, by running the following command:

  CP/etc/vmware/config/var/tmp /.

  2. edit/etc/vmware/config so that there is a return transport after the line:

  prefvmx.consolidateDeleteNFSLocks = 'TRUE '.

  While he reads the following:

  ---------------------------------------------

  authd.soapServer = 'TRUE '.

  prefvmx.consolidateDeleteNFSLocks = 'TRUE '.

  Authd.proxy.vpxa - nfc = "vmware - vpxa:vpxa - nfc.

  Authd.proxy.vpxa - nfcssl = ' vmware - vpxa:vpxa - nfcssl.

  ---------------------------------------------

  3. restart the management agent spend.

  Note: Make sure that you are not in your environment name resolution problems.

• Host connection failure: VMs, warehouses of data inaccessible (in gray)

  Hello everyone,

  I have 1 ESXi host 5.1 throwing alarm: host connection failure. Al a SNMP trap for the entity has been sent.

  I have 10 servers ESXi 5.1 all the amanged by 1 5.1 VCenter server.

  8 ESXi servers belong to a cluster HA and 2 are not in a cluster.

  The issue I'm facing is with 1 ESXi host that is outside the cluster.

  The virtual machines on that host are powered OFF. I am not able to turn on. I am not able to Vmotion them. However, if I remove them from the inventory and add them to the inventory on a different host running, VM works very well.

  Shared on this host data warehouses show Greyed out as well except the local data store (VMFS). I have 1 VM on the local disk of this host and I can power ON the property. But all other virtual machines are the shared data store (NFS - Netapp) and I can not turn on this particular host 1.

  Same data warehouses (NFS - Netapp) are shared with the other 9 (Clustered and nonclustered hosts) ESXi hosts and data store is fine and detected by all hosts.

  I tried to reboot the host several times but without success.

  Can someone please share their expert advise on how to fix this?

  Please see the attachment for details of esxi host does not.

  Thank you

  AG.

  Hello

  Yes, you can remove and install it again, Siu here below KB

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1005057

  Concerning

  Mohammed

• Connection failure: ' the user profile Service service failed to connect. User profile cannot be loaded. »

  I'm trying to log on to my account on my laptop, and whenever I try to connect it says

  "The service user profile Service could not connect.

  User profile cannot be loaded. »

  Is it possible that I can fix this or make this standard account administer?

  (If someone can answer, could you please try and explain as simple as possible, thank you)

  Hello

  References to Vista also apply to Windows 7.

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account
  in Safe Mode has no default password (so unless someone has changed the password for it)
  should be available).

  Some programs such as the Google update (if you added the toolbar Google, Chrome or)
  Google Earth) has been known to cause this problem.

  Error message when you log on to a Windows Vista-based or Windows 7 computer
  by using a temporary profile: "the user profile Service has no logon. Profile of user cannot
  being responsible.
  http://support.Microsoft.com/kb/947215

  Difficulty "the user profile Service has no logon. User profile cannot be loaded. "Error in Windows 7
  http://www.SevenForums.com/tutorials/186131-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected
  with a temporary profile. "in Vista & Windows 7.
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  How to enable or disable the built-in Windows 7 Administrator account
  http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.html

  Use the hidden administrator account to lower your user account APPLY / OK then lift back
  to the admin. This allows clear of corruption. Do the same for other accounts if necessary after
  the above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
  password (or two with the same password) use a test or difficulty to another.

  You can run the command Admin account hidden from the prompt here if
  necessary.

  How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  If you can't access your old account you can still use an Admin to migrate to a new
  (remember to always leave an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• How to manage the connection failure of network at the service of bussiness on OSB

  Hello everyone.
  
  Thank you for your attentions. I need help with the error handling in the OSB 11 g. I have a proxy that road to a business service to check the status of the service profile. I use the java client to use the proxy service and return the results to clients. The problem that I am facing manipulation is failure of the network connection.
  
  I want to get some message (or any useful information) of proxy service to indicate that the connection to the business service is not available when the connection fails. I tried to add the management of errors, but I can't found the action from the list of options.
  
  Can you review my proxy service and tell me some resolutions?
  Any suggestion is appreciated.
  
  I thank in advance
  

  <?xml version="1.0" encoding="UTF-8"?>
  <xml-fragment xmlns:ser="http://www.bea.com/wli/sb/services" xmlns:tran="http://www.bea.com/wli/sb/transports" xmlns:env="http://www.bea.com/wli/config/env" xmlns:http="http://www.bea.com/wli/sb/transports/http" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:con="http://www.bea.com/wli/sb/pipeline/config" xmlns:con1="http://www.bea.com/wli/sb/stages/transform/config" xmlns:con2="http://www.bea.com/wli/sb/stages/config" xmlns:con3="http://www.bea.com/wli/sb/stages/routing/config" xmlns:con4="http://www.bea.com/wli/sb/stages/logging/config">
    <ser:coreEntry isProxy="true" isEnabled="true">
      <ser:binding type="SOAP" isSoap12="false" xsi:type="con5:SoapBindingType" xmlns:con5="http://www.bea.com/wli/sb/services/bindings/config">
        <con5:wsdl ref="Test/resources/wsdl/PortalSide"/>
        <con5:port>
          <con5:name>PortalSideSOAP</con5:name>
          <con5:namespace>http://www.example.org/PortalSide/</con5:namespace>
        </con5:port>
        <con5:selector type="SOAP body"/>
        <con5:WSI-compliant>false</con5:WSI-compliant>
      </ser:binding>
      <ser:monitoring isEnabled="false">
        <ser:aggregationInterval>10</ser:aggregationInterval>
        <ser:pipelineMonitoringLevel>Pipeline</ser:pipelineMonitoringLevel>
      </ser:monitoring>
      <ser:reporting>true</ser:reporting>
      <ser:logging isEnabled="true">
        <ser:logLevel>debug</ser:logLevel>
      </ser:logging>
      <ser:sla-alerting isEnabled="true">
        <ser:alertLevel>normal</ser:alertLevel>
      </ser:sla-alerting>
      <ser:pipeline-alerting isEnabled="true">
        <ser:alertLevel>normal</ser:alertLevel>
      </ser:pipeline-alerting>
      <ser:ws-policy>
        <ser:binding-mode>wsdl-policy-attachments</ser:binding-mode>
      </ser:ws-policy>
    </ser:coreEntry>
    <ser:endpointConfig>
      <tran:provider-id>http</tran:provider-id>
      <tran:inbound>true</tran:inbound>
      <tran:URI>
        <env:value>/Test/proxy-services/DnICT_WSDL_PS</env:value>
      </tran:URI>
      <tran:inbound-properties/>
      <tran:all-headers>false</tran:all-headers>
      <tran:provider-specific>
        <http:inbound-properties/>
      </tran:provider-specific>
    </ser:endpointConfig>
    <ser:router>
      <con:pipeline type="request" name="GetRequestInfo_pipeline_pair_request">
        <con:stage name="InputProcess_stage">
          <con:context>
            <con2:varNsDecl namespace="http://www.example.org/PortalSide/" prefix="por"/>
            <con2:varNsDecl namespace="http://www.example.org/PortalSide_Test/" prefix="por1"/>
            <con2:varNsDecl namespace="http://www.example.org/OutputSchema" prefix="out"/>
          </con:context>
          <con:actions>
            <con1:assign varName="docId">
              <con2:id>_ActionId-2456490176600649155--723117a.130d7d91065.-7b86</con2:id>
              <con1:expr>
                <con2:xqueryText>$body/por:checkStatus/documentId/text()</con2:xqueryText>
              </con1:expr>
            </con1:assign>
            <con1:assign varName="depId">
              <con2:id>_ActionId-2456490176600649155--723117a.130d7d91065.-7b69</con2:id>
              <con1:expr>
                <con2:xqueryText>$body/por:checkStatus/departmentId/text()</con2:xqueryText>
              </con1:expr>
            </con1:assign>
            <con1:assign varName="srvId">
              <con2:id>_ActionId-4566721321360037228--34ba1746.13170e34dc9.-7d41</con2:id>
              <con1:expr>
                <con2:xqueryText>$body/por:checkStatus/serviceId/text()</con2:xqueryText>
              </con1:expr>
            </con1:assign>
          </con:actions>
        </con:stage>
      </con:pipeline>
      <con:pipeline type="response" name="GetRequestInfo_pipeline_pair_response">
        <con:stage name="ErrorHandling">
          <con:context/>
          <con:actions/>
        </con:stage>
      </con:pipeline>
      <con:flow>
        <con:pipeline-node name="GetRequestInfo_pipeline_pair">
          <con:comment>Lay cac thong tin trong form search</con:comment>
          <con:request>GetRequestInfo_pipeline_pair_request</con:request>
          <con:response>GetRequestInfo_pipeline_pair_response</con:response>
        </con:pipeline-node>
        <con:branch-node type="condition" name="branching_public_services">
          <con:context>
            <con2:varNsDecl namespace="http://www.example.org/PortalSide/" prefix="por"/>
          </con:context>
          <con:branch-table variable="depId">
            <con:branch name="SoTTTT">
              <con:operator>equals</con:operator>
              <con:value>1</con:value>
              <con:flow>
                <con:branch-node type="condition" name="DnICT_dept_services">
                  <con:context/>
                  <con:branch-table variable="srvId">
                    <con:branch name="DichVu_1">
                      <con:operator>equals</con:operator>
                      <con:value>1</con:value>
                      <con:flow>
                        <con:route-node name="RouteToDnICT_BS">
                          <con:context>
                            <con2:varNsDecl namespace="http://www.example.org/PortalSide/" prefix="por"/>
                            <con2:varNsDecl namespace="http://www.example.org/PortalSide_Test/" prefix="por1"/>
                            <con2:varNsDecl namespace="http://www.example.org/OutputSchema" prefix="out"/>
                          </con:context>
                          <con:actions>
                            <con3:route>
                              <con2:id>_ActionId-4566721321360037228--34ba1746.13170e34dc9.-7b4c</con2:id>
                              <con3:service ref="Test/busines-services/DnictServiceBS" xsi:type="ref:BusinessServiceRef" xmlns:ref="http://www.bea.com/wli/sb/reference"/>
                              <con3:operation>selecttrangthai</con3:operation>
                              <con3:outboundTransform>
                                <con1:assign varName="username">
                                  <con2:id>_ActionId-4566721321360037228--34ba1746.13170e34dc9.-7b4b</con2:id>
                                  <con1:expr>
                                    <con2:xqueryText>fn:string('stttt')</con2:xqueryText>
                                  </con1:expr>
                                </con1:assign>
                                <con1:assign varName="password">
                                  <con2:id>_ActionId-4566721321360037228--34ba1746.13170e34dc9.-7b4a</con2:id>
                                  <con1:expr>
                                    <con2:xqueryText>fn:string('123456')</con2:xqueryText>
                                  </con1:expr>
                                </con1:assign>
                                <con1:replace contents-only="true" varName="body">
                                  <con2:id>_ActionId-4566721321360037228--34ba1746.13170e34dc9.-7b49</con2:id>
                                  <con1:expr>
                                    <con2:xqueryText><![CDATA[<soap:selecttrangthai       xmlns:soap="http://soapinterop.org/">
       <username       xsi:type="xs:string" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">{$username}</username>
       <password       xsi:type="xs:string" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">{$password}</password>
       <masohoso       xsi:type="xs:string" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">{$docId}</masohoso>
  </soap:selecttrangthai>]]></con2:xqueryText>
                                  </con1:expr>
                                </con1:replace>
                              </con3:outboundTransform>
                              <con3:responseTransform/>
                            </con3:route>
                          </con:actions>
                        </con:route-node>
                      </con:flow>
                    </con:branch>
                    <con:default-branch>
                      <con:flow/>
                    </con:default-branch>
                  </con:branch-table>
                </con:branch-node>
              </con:flow>
            </con:branch>
            <con:branch name="SoGTVT">
              <con:operator>equals</con:operator>
              <con:value>2</con:value>
              <con:flow/>
            </con:branch>
            <con:default-branch>
              <con:flow/>
            </con:default-branch>
          </con:branch-table>
        </con:branch-node>
      </con:flow>
    </ser:router>
  </xml-fragment>

  P/S:
  
  When the connection to the business service is failure, I received this SOAP message:

  <soapenv:Envelope       xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
       <soapenv:Body>
       <soapenv:Fault>
       <faultcode>soapenv:Server</faultcode>
       <faultstring>BEA-380002: No route to host</faultstring>
       <detail>
       <con:fault       xmlns:con="http://www.bea.com/wli/sb/context">
       <con:errorCode>BEA-380002</con:errorCode>
       <con:reason>No route to host</con:reason>
       <con:location>
       <con:node>RouteToDnICT_BS</con:node>
       <con:path>request-pipeline</con:path>
       </con:location>
       </con:fault>
       </detail>
       </soapenv:Fault>
       </soapenv:Body>
       </soapenv:Envelope>

  Kind regards.
  CUONG Pham
  
  Published by: Doubt_Man on July 28, 2011 10:26

  You can add an error on the route action handler in your proxy service.

  you could investigate the $fault variable and check example what errorcode BEA... comes back.
  Then, you can decide what to answer in return... for example, create your own SOAP-fault and set your own messages.

  now the default $fault value generated by the OSB will be get back

  http://www.xenta.nl/Blog/2010/07/17/Oracle-service-bus-11g-handling-SOAP-faults/
  Maybe we can help you a bit

• Audit connections

  I have an application that uses Microsoft ISS to connect to the database, it uses the connection information that is ook coded in a DLL, which I do not have access to the source code. I am establishing the scheme she's trying to connect to. I tried to find this information in the following locations without success in locating: -.
  
  1 alert log
  2 bdump and trace to the user dump files
  3. the event viewer
  4 Listener.log
  5 Listener.trc (trace level admin)
  6 track of Net client oracle (trace level admin)
  
  Does anyone have any ideas on how I can capture this information, BTW, the database is 10.2.0.4.0 running Windows.

  Yes, audit database recording connection also failures.