ViewPlanner fails when the "Connect-Start-workload.

Similar Questions

• Downloads fail when the connected HDMI cable

  Since FF26, whenever I plug my my laptop HDMI cable to switch the output on my TV screen or pull on the cable, all my current downloads fail.
  Any suggestions why this could be would be very appreciated!

  Hello z_smith,

  Please contact the Mozilla Support.

  Try Firefox Safe mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that disables some settings and disables most Add-ons (extensions and themes).

  (If you are using an additional theme, place you in default theme.)

  If Firefox is open, you can restart in Mode without failure of Firefox in the Help menu by clicking on the restart with the disabled... modules menu item:

  

  If Firefox is not running, you can start Firefox in Mode safe mode as follows:

  • On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac: Hold the option key during the startup of Firefox.
  • On Linux: Exit Firefox, go to your Terminal and run firefox-safe-mode
    (you may need to specify the installation path of Firefox for example/usr/lib/firefox)

  Once you get the pop-up, simply select "" boot mode safe. "

  

  If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. Please follow the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. This might help others with the same problem.

  See you soon,.
  Patrick

• I get an error message when the computer starts, "failed to prepare the critical file! Engine out of Chameleon.

  I have a laptop Asus N53Jq, 16 GB, 224 GB ssd, I get an error message when the computer starts, "failed to prepare the critical file! Engine out of Chameleon"when I click the computer works fine, but it seems that she was taking more resources without doing me anything. Do know how to solve this problem.

  Original title: Chameleon engine

  I uninstalled ASUS Splendid Video Enhancement Technology to my computer and it solved the problem!

• How can I configure numerical Lock ON when the computer starts?

  I have a new laptop HP G70.  In the User Guide HP G70 on keyboards - C01540939.pdf, paragraph 3 using keyboards & pointing devices, Page 8 there is a note "the function of the keyboard that is active when the computer is turned off is restored when the computer turns on.   This does not work on my computer HP G70.  It always starts up the number Lock OFF.   How can I configure my computer to set the digit Lock ON when the computer starts?  I always use the number keypad and never use page up/down - button on top/bottom/right/lelt arrow.

  Also, how can I configure my computer to set the touch mouse on the computer OFF for the start.  I always use an external mouse.

  Any help would be appreciated.  It is a simple thing, but the present operation HP G70 is most annoying.

  PLEASE DO NOT CONTINUE TO MEET THIS PROBLEM!

  THE HP G70 WAS FAULTY!   EACH HP G70 HAS THIS PROBLEM!

  HP REPLACED MY HP G70 WITH a HPdv7.  THE HPdv7 PERFORMED THE DESCRIBER NERMAU LOCK FUNCTION AS IN THE HP INCTRUCTIONS.

  .
  
  Bob_in_PGI

  I'm surprised that nobody knows how to set the Num Lock at startup before you connect.  Where is the help of HP?

  I now have Windows 7 64 bit.

  There must be someone who knows how to do this.

  Bob in PGI

• Software HP C4380 printer causes delays when the computer starts.

  I don't know what triggered the problem. I had unplugged the printer and reinstalled. Now, when the computer starts, it hangs for 2-3 minutes seeking a device to the USB location 0. That remove the HP software solves the problem. I installed with the latest HP drivers and tried to use only the printer drivers without the scanner software. If I avoids the HP software, Windows installs with a Jungo win driver that causes the same result. It could have been an update of my Windows XP Home SP3 in the meantime I demolished the printer and reinstalled, but I can't follow any other changes.

  Now the printer is useless because of this problem. HP forums suggested disabling a program of tracking of HP under Services.msc, but who has also failed to solve the problem. Any suggestions?

  check the clean boot state, this might help you http://support.microsoft.com/kb/929135

• The speakers click when the fan starts and stops Equium A100-147

  I recently bought the 100-147 satellite and noticed that a click comes from the speakers (or headphones or external speakers) when the fan starts up and even when the fan stops. Sometimes it s quite remarkable, other times not so remarkable.

  Everyone can hear that click? If it's normal, I can live with that, otherwise I will return it for repair. Any comment please?

  In addition, it seems slow at startup and shut down. Put into service takes 2 minutes and 35 seconds, and stop to 33 seconds. Is this normal bearing in mind, it is running MCE? I have loaded additional software such as Itunes, Nero, Office 2000, Photoshop 5.0 etc.

  Thank you for reading.

  Clicking noise when the fan starts or stops turning is not uncommon. On my satellite a similar sound will appear when the fans begin to turn or the HARD disk starts to spin.
  Then worry about don t, I think its OK.

  The start-up procedure can take several times when a lot of applications and software to load at the beginning. Equium A100 seems to be one of the newer laptops, and I assume that different applications Toshiba load at the beginning.
  Also an Antivirus applications could extend the startup procedure.

  You might try testing something. Disable the antivirus of loading at the beginning and check if the laptop will start faster.

  It s even with stops. All background processes that are run in the context of the operating system should be closed until the laptop shuts down completely.

• What do you do when the screen starts to turn upside

  What do you do when the screen starts to turn upside

  Hello

  Please try this (Windows 7)

  Press the keys Ctrl and Alt at the same time then the arrow key press upwards (or downwards).

  Or fix this way

  • Right-click on an empty distinguished on desktop
  • Select Customize
  • Select display
  • Select change display settings
  • Do not use returned to the Orientation box.
  • Click OK/apply

  Kind regards.

• When the computer starts, it reads configuration updates 1 3-0%; not updated since 12.8.09, showing 8070002 error

  When the computer starts, it reads configuration updates 1 3-0%, but it continues
  Latest Windows Update 12.8.09; do not update since 12.8.09
  Display of error code 8070002.
  Mechanic charged and removed the registry and advanced system care3

  Hello

  Windows Update Error 80070002http://windowshelp.microsoft.com/Windows/en-us/help/c5f4d9e0-3eb6-426b-8118-0cedf489a75f1033.mspx#EJH

  Fix Error 80070002 when using Windows Update in Vista
  http://www.mydigitallife.info/2007/12/21/fix-Error-80070002-when-using-Windows-Update-in-Vista/
  Error Code 0 × 80070002 during Windows Vista SP1 Setup Install - SP2 might have similar problem
  http://www.tipandtrick.NET/2008/error-code-0x80070002-during-Windows-Vista-SP1-Setup-install/

  ------------------------------------------------

  Check the above and you may need to use these methods to interrupt the cycle.

  I guess that part of the question could be a driver which is really old or similar should not be loaded.

  This exit Windows updates on (after you have access) and stop the updates of the driver to load.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ---------------------------------------------------

  You can use the solutions in this KB - 3 methods and I listed a little help for them below

  The update is not installed successfully, you receive a message, and the computer restarts when you try to
  install an update in Windows Vista
  http://support.Microsoft.com/kb/949358

  Method 1: Start Windows Vista with the Windows installation media and use the repair feature

  How to do a startup repair in Vista
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  You can also do a safe mode startup repair to access the Recovery Options If you have them available
  or use the DVD as described above.

  This tells you how to access the System Recovery Options
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  Method 2: Start the system in safe mode and then use the system restore feature

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can also do a restore of the system of starting with a Vista disk.

  Method 3: Rename the Pending.xml file, and then change the registry (this method is part of the advanced troubleshooting)

  See article below for that.

  You can use this method on the updates that have this problem.
  http://support.Microsoft.com/kb/949358

  Hide the update (click right - HIDE in the updates of Windows) and go to the Microsoft Download Center to download
  and install it.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  ------------------------------------------------------

  Once you are in Windows I was running once again reset here as a precaution.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Hope this helps sort it out for you.
  Rob - bicycle - Mark Twain said it is good.

• When the computer starts first to the top, a window titled "run as" the question "which user account do you want to use to run this program?

  Original title: which user account you want to use to run this program?

  I use a computer that is running Windows XP SP3. Recently, when the computer starts first to the top, a window will appear titled ' run as ' the question "which user account do you want to use to run this program?" with two radio buttons. The default selection is "Current user" and there is a checkbox to "protect my computer and data from unauthorized program activity. The other button is for "the next user. I have to click 'OK' before you can run any programs.

  There is only one user on the computer. Why has this window began to appear and can I get rid of him?

  Hello

  That you recently installed which triggers this popup message initially upwards?

  You can try to perform a clean boot and check if it helps.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to configure Windows XP to start in a "clean boot" State

  Note: Make sure that you put the computer to a Normal startup once you have completed troubleshooting.

• How to remove temporary files, waiting to be written to disk when the computer starts? __

  How to remove temporary files, waiting to be written to disk when the computer starts?

  Hi Reasman,

  Welcome to the Microsoft answers site!

  To clear pending files, select the files/folders in the 'Files to add to the CD/DVD' box and press DELETE. However, if you want to delete all files, click the CD/DVD drive and select 'Clear the staging area' from the context menu.

  You can manually delete the files that are stored in the following location:

  %USERPROFILE%\Local Settings\Application Data\Microsoft\CD Burning folder

  I hope this helps!

  Kind regards
  Gokul - Microsoft Support

• TRYING TO PLAY THE GAME "PANZER GENERAL 2, WHEN THE GAME STARTS TO RUN THE BROWSER CRASHES.

  Original title: papabob68

  have windows 7-

  I'M PLAYING THE GAME "PANZER GENERAL 2, WHEN THE GAME STARTS TO RUN THE BROWSER CRASHES.

  After that, I have to go to master to stop and start again... I have read all the post I can find and I updated the driver and reset the display and SO ON, SO ON, AND...

  I played this game on windows xp and I have done everything but put A BULLET in it and I think about IT!

  I'd be willing to by a new game made for windows 7 but does...

  MANY OF THE POST TALK ABOUT A 64-BIT SYSTEM, BUT MINED IS A 32-BIT, SO THERE HAS NOT BEEN TWO MANY ANSWERS...

  "HELP!" @!@!

  PAPABOB68

  "I updated the driver and reset the display and SO ON, SO ON, AND ON...". »

  It is better to translate 'SO ON'... to something specific, or you can read suggestions for

  have you tried things once again.

  -Include your brand of processor graphics and model as well.

  -The best place for the hotfixes to vintage games is usually on a specific to this game fan site,

  or the developer forums, but...

  "but mine is 32 bits"

  (Assuming you are using the disk depending on the version of the game.)

  -A 32-bit Windows can be an advantage with some games of this vintage (release date of 97) as

  always use a 16-bit Installer, which will run on 32-bit but not 64-bit of Windows.

  Apart from that, there should be no difference between the OS versions for compatibility.

  -However, prior to version 2000 games (and some newer), may have other

  questions that make them run poorly. Audio and color are two common problems.

  -The camera may result from a problem with earlier versions of Open GL, Direct 3D.

  DirectPlay and Glide3D (gone, but not forgotten) can be a problem sometimes too?

  These questions sometimes have patches on based fan sites.

  -Some 97 games maybe still based back that requires using the window BACK, an emulator "BACK."

  Good old games sells some vintage games with DRM (copy of code protection) removed, and installs

  with BACK box automatically.

  They have Panzer General 2 for $10 USD, but if you expect one of their frequent sales you should be

  able to pick up for US $5-$ or less.

  http://www.Gog.com/

  [ EDIT: just watched add it, and it seems to be a DirectX game 9] It must have been updated DX9

  for the downloadable version.

  It can been Direct3D when released.  DX 9 was not released before 2002

  -All on the theme of DirectX. If you have not updated DirectX, you should do it.

  Win7 is not the most recent DX 9, 10 or 11 files when first installed.

  Download installer Web Runtime DirectX end-user of the official Microsoft Download Center ]     

  -You can also use D-Fend Reloaded, which is a user interface that reduces the learning curve for the DOS window.

  The download includes the box and a few BACK based games start practicing.

  D - Fend Reloaded: overview

  Finally, and above all by an effort... An important announcement for all users of the disk based games.

  -A new (since Win10) problems with the old disk based games comes from malicious software developed by MS - DRM blocking.

  If your disc games has a file called - secdrv.sys - on it, the game will be blocked by a

  Windows 'security update' - KB3086255-.

  I have more information about the blocking of the DRM, including how to work around this - here -

  .

• Node Manager does not restart the WebLogic servers when the computer starts

  Hi all
  
  I'm testing the new WebLogic Server version as well as of new forms and reports. I don't have much experience with WebLogic (using the Internet Oracle 10g Application) bare with me for a moment.
  
  I'm using Node Manager to start admin server and all the other managed servers. I also installed nodes as a Windows service manager and configured the boot parameters to include Xrs-/-Xnohup, as stated in the documentation and everything seems to work fine until I restart the server. Node Manager service starts and according to his diary, he plays startup.properties of each server, but it does not start them. Am I missing something here? I found myself in an impression that Node Manager must restart the server in case of reboot system, if the server was running when the computer has been restarted.
  Even though I don't have much experience with WebLogic, I'm not a beginner. I managed to migrate (for testing only) all the business application (more than 1000 forms and reports) of iAS 10g to the new version in two days. Application works very well and I only have problems with servers to start when the computer starts using Node Manager.
  
  Test environment:
  Windows 2008 Standard 32-bit
  RAM: 2 GB
  HARD DRIVE: THE 140 GB
  CPU: 2xXeon

  # nodemanager.properties
  ...
  CrashRecoveryEnabled = true
  ...

• Remote Desktop connection fails when the firewall is enabled.

  Trying to install Windows 7 Ultimate to allow the desktop remotely from a Windows Phone 8.1.

  I have lived this guide allow remote connections to install Win 7 PC. The configuration of the connection I want is only for the local home network.  In the firewall settings 'allow through firewall programs' Remote Desktop - RemoteFX is checked for audiences and home networks.

  If I disable the firewall of home network the phone connects easily and will control the PC.

  With firewall switched network phone will not connect and gives an error code 0 x 204. There is no notification of the computer, the firewall blocks a program.

  I just that it works with the firewall of network power.

  Hello Garym,

  Welcome to Microsoft Community forum.

  I suggest that you go through the information provided in the following MSDN blog and see if it helps.

  Remote Desktop Services blog

  To get help, I suggest you to post your query on TechNet Forums that the query you posted is more complex that can be answered on the community forum. The link is provided below.

  http://social.technet.Microsoft.com/forums/en-us/home?category=w7itpro

  Thank you.

• Bluetooth is no longer automatically when the computer starts

  I have the battery Bluetooth version 2.01.21.1. It was working fine. When the laptop booted, the bluetooth mouse was connected automatically.
  All of a sudden the icon will automatically appear in the system tray and I so manually connect the mouse every time
  It is still listed in the desktop Start menu, and it is always checked at startup in the msconfig.
  How can I fix it?
  Thanks in advance

  Hello Andrew

  Try to remove preinstalled Toshiba BT stack and after mobile download page restart install the most recent version of Toshiba.

• HP 8620: Printer in offline mode when the computer starts

  My 8620 Officejet is offline.  It is connected via a cable to my 360 spectrum HP network.  When I turned off the computer and start that he even once, the printer starts in offline mode - for example, when I got to print from Microsoft Word (Office Pro 2016), the printer is 'offline' in the Word print dialog and I get a message from Windows system, saying printer offline - and nothing prints.

  I can solve it with the help of HP print and Scan doctor.  But if I closed the computer and start it up again, it is new offline.

  I can fix this by going to the printer by pressing the button on the front power off and then restarting it - the document in the print queue print immediately.

  Also, if I start the Server Web part, select 'Tools' and then click 'Print a self Test Page', the page prints as usual. However, if I then go back to Microsoft Word, the printer remains offline.

  HP Printer Wizard starts well and the analysis of function of Document or Photo works very well.

  It's just the feeling that is not.

  Any ideas gratefully received.

  Thank you
  Philippe

  Hi @Philip4,

  Welcome to the HP Forums!

  I noticed that your HP Officejet Pro 8620 keeps going offline. I'm happy to help you!

  Please, try the steps in this guide, "offline" Status Message printer (Windows 10), as well as this guide, the printer is not maintaining the wireless connection.

  If this, or one of the posts on this thread, helped you to solve the problem, please click on accept as Solution on the message. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

  I hope these guides help!