Uninstall ACS 4.2 fail

Similar Questions

• Uninstalling Microsoft Office has failed and cannot uninstall or install anything else.

  Original title: install problem HELP

  I tried to uninstall Microsoft Office and it failed several times. And since then I have not been able to uninstall or install anything else! A pop-up Windows Installer that says "preparing to install" appears occasionally. I tried about 100 things and nothing really worked! Can someone HELP me please?

  I tried before, but nothing helped. I just restore my computer to its factory settings, that fixed it.

• I can't uninstall programs. Rpet "failed and view log."

  I can not uninstall citrix (remote access functionality) and just says download failed and "view log"... Help!

  Hey, tara,.

  Would you happen to talk to the Citrix XenApp client, which is used for the management of patients say?
  If you are, then I can tell you that they moved to a new client that you can download.
  I communicate with anyone you have your patient management system with and ask them for the new client application.
  Hope this helps

• secondary ACS 5.1 fails to cancel the registration, after IP change on primary

  IP address of primary education had to be modified, in response to a hardware failure of the RADIUS server with the intellectual property in several configs device.

  Now school is unresponsive to repeated requests "Cancel registration of the primary", even after reloading.

  apparently because he can't reach the primary to the old IP address.

  Asking to cancel the registration in the GUI generates pop-up that says: "this operation will remove this Instance ACS of the primary Instance.

  On this instance of the CSA management applications will be restarted and you will need to identify yourself again.  After you perform this operation

  Please wait five minutes for this restart complete.

  Do you want to continue? »      [OK]

  But checking back after 10 minutes - or even the next day - find status of secondary education unchanged.

  Also tried in Local Mode, cancel the registration of the primary;  This operation also fails.

  Does anyone have the URL HOWTO on a total reconstruction of the application of GBA?

  The two ACS are PCA-1121-K9 5.1.0.44.4 running.

  Thanks in advance for any help...

  UPDATE: *.

  Command, has recommended "application reset-config acs", has been _exactly_ what was needed.

  jrabinow - thanks a lot!    :-)

  also, thanks for mentioning that the licence would be required, so that I could locate in advance and have it ready.

  Since there is no local CERT on the server, we should not re - install those.

  Since it is a secondary antibody that it should not have too much in terms of specific configuration

  Therefore, one possibility is to reset the configuration, so once more, it becomes just a stand-alone node and then that to the deployment as it is for any new node and as you saved it until

  Reset configuration can be done using the following command in the CLI:

  rebate to zero-config CSA

  Note that after resetting the configuration you will need to reinstall the license so make sure that you have it handy

  So if you installed a certificate server to the secondary server, you have that too

• ACS wireless authentication failed

  Greetings,

  We have recently migrated to IAS in Windows to Cisco ACS 5.2.0.26 for our wireless authentication and use PEAP-MSCHAPv2 hit AD. Everything seems to work fine except when a user account has a restriction on which machines they are allowed to connect to, date to which an ACS journal entry shows as follows.

  24441 account not allowed to log on by using the current workstation

  This was work properly when we were using the IAS server and I think ACS is not just pass the attributes required at this time. All know how what extra configuration may be needed in ACS to support this configuration?

  See you soon,.

  Rob

  Sounds like you have enabled computer authentication. In the case of ACS wireless can get the names of the authentication request machine. With this strategy/limitation defined in Active Directory to apply the restriction of user login then ACS will have to provide a name of host machine for each request that it send to Active Directory. As it has already set up it is not possible for the CSA to know the name of the actual machine of the authentication of the user, ACS sends a default name for the machine its own name with each request to AD. On the ad, we create a computer by name of ACS account and then allow all users to connect to this computer. This way ACS is allowed to authenticate all.

  If please see Add GBA as a computer account on the ad with the same host name and see if helps.

  Rgds,

  Jousset

  The rate of useful messages-

• Failed to uninstall After Effects.

  I tried to remove all of the CS6 software in order to free space of hard disk for the software CC. However, at some point after effects has become corrupted and will launch not (which gives the error code 1) and will not uninstall because the process fails. I tried the cleaning tool, but it didn't work. Any other ideas?

  You can manually remove the caps.dp and then rinse the remaining files:

  Important directories

  Entries in Add or remove programs can be removed later with the Microsoft Installer Cleanup utility (deprecated, but works for Win 7 upwards) or by manually editing the registry.

  Mylenium

• Update fails, uninstall Adobe with Error 1303

  I had an employee report that he could not open the PDF files.

  I go to his machine, and thought which is strange Adobe Reader X is not installed.  I have re-installed and think a lot about it.

  About 10 minutes later, he called again and he was missing once again.

  I've delved into the issue and concluded that when the update is running and running because I have it set to automatically install updates, it fails with an error:

  Error 1303 the installer has insufficient privileges to access this directory: c:\program files (x 86) \Common Files\Adobe\ARM\1.0.  The installation cannot continue.  Log on as an administrator or contact your system administrator.

  I tried to take possession of the Adobe folder under c:\programdata\, and one located in c:\program files (x 86) \Common files and inherited the correct permissions.

  I restarted the machine and the update always uninstall Adobe and then fails to install the update.

  I thought it's Kaspersky which is interfering, but best I can tell I have disabled policy and each component of Kaspersky and it always fails to apply the update.

  Any ideas?

  Also, the user is an administrator account, I double checked.

  Post edited by: Joshua1F

  Has exactly the same problem on Win 7 x 64 system.  After making many changes to permissions and properties, restored to a point before that these changes, disabled windows firewall, installed the windows KB947821 hotfix and then put to day/install Adobe X (10.1) and it worked. Not sure if it was the fix or disable the firewall, since I did both at the same time.  Note: When you install the hotfix, it hangs at about 70%.  In fact, it scans your system, so let it run its course.  Good luck and let me know if it works for you.

• Cisco Secure ACS 3.3 (1)-> 4.0 upgrade problems (1)

  Hi all!

  I have problems updating my primary ACS since version 3.3-> 4.0

  I always get the following error message, then it does the upgrade:

  "The record of the CiscoSecure ACS seems to be blocked by another application: C:\Program Files\CiscoSecure ACS v3.3.

  Please close all applications... blabla... »

  The thing is, I have improved my ACS backup first, and this upgrade worked like a charm.

  In both cases, both for the primary and backup I do a takeover with Dameware remote, copied the ACS 4 folder on the hard disk of the server and make the upgrade of this folder.

  As I said, the upgrade of backup server worked without a hitch.

  That's what I tried:

  1. I checked that NO application use the 3.3 ACS file and no Explorer window is open on this folder or subfolders.

  I checked using a small program called Filemon.exe from Sysinternals. According to this program, anything accessed said folder.

  I also checked it again by renaming actually ACS 3.3 file once I stop all services of the ACS. I could not rename the folder if the services have been started.

  2. I tried to stop the ACS services first and then make the configuration, got the same error.

  3. I have disabled the antivirus software, got the same error.

  Basically I am at my wits end now...

  However, I have two options:

  1. uninstall ACS 3.3, do a clean install of ACS 4.0 and import the data of all the GBA backup.

  Who would not raise by the primary association with the ACS configuration backup? So I think I will need to go on it later and make changes, if necessary?

  2 make a backup of the ACS 3.3 with csutil b

  Uninstall ACS 3.3, do a clean install of ACS 4.0 and import all the data with csutil - r

  Would this work? I've seen conflicting information here in this forum, some say that it works, the other say it's not.

  I'm a little confused why it worked so well the GBA backup but fails on the primary ACS.

  Any help would be greatly appreciated!

  Thank you!

  Ivar Thorolfsson

  Hello

  Folder lock message often appears if newspapers located in the directory of the ACS are too big.

  Move the logs of the following directories: -.

  CSAdmin\Logs

  CSAuth\Logs

  CSDBSync\Logs

  CSLog\Logs

  CSMon\Logs

  CSRadius\Logs

  CSTacacs\Logs

  Newspapers

  Then try to upgrade.

  Kind regards

  Vivek

• Uninstalled AVG, but the icon is still active in the systray

  I downloaded AVG more their time 24 Tune up.  Computer is very slow so I uninstalled and installed Microsoft Security Essentials

  The AVG icon is still active in my tasbar. have tried ininstall again, but he won't

  My laptop freezes and I can't "Add or remove programs" to see if its still there.  To the down loaded games taking too long to come and freeze for centuries before change of scene and then stop completely. If I can get the Task Manager to show everyone, there are several screens, but I was also reduced to press the off button - wrong I don't know.

  Can anyone help I get desperate!

  Of http://www.avg.com/us-en/utilities

  «AVG Remover»

  AVG Remover eliminates all parts of your installation of AVG on your computer, including the registry items, installation files, user files, etc. AVG Remover is the last option to be used in the case of the AVG uninstall / repair installation process failed several times. »

  Probably you need to download, install and run the 32-bit version of AVG Remover.

  EDIT

• Search ACS 4.2 order unknown user from database

  Hello

  I have several user databases in the search order for the unknown user policy. Ignoring the manual (http://www.cisco.com/en/US/partner/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.2/user/guide/UnknUsr.html#wp277530), which States that, after the failure of authentication from the first database (Windows) the ACS does not continue to look for the second database, a RADIUS server. I see that, with the failure in the first user, database stops the ACS research and fails to the user authentication with an authentication failure code "external DB password invalid.

  Documentation not going or is this a bug in the ACS v4.2.1? How can I make the ACS to continue to seek the second database user?

  Hello Roberto,.

  If the external database returns an invalid username/password, then it is intended for ACS is not to check the following data in the sequence and the failure of authentication:

  http://www.Cisco.com/en/us/partner/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.2/user/guide/UnknUsr.html#wp277502

  "For authentication requests, ACS applies the unknown unknown user policy to users. ACS does not backup to the known or discovered users authentication failure unknown when user authentication support. »

  If you want that ACS to verify the following database, even if a response from the invalid username/password has been received, you will need to explicitly set this on the external Windows database configuration page, in the section entitled 'Strategy for the unknown user' (but on the database configuration page specific Windows, not covered by the unknown user policy) :

  http://www.Cisco.com/en/us/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.2.1/User_Guide/UsrDb.html#wp354338

  In addition, on the previous screenshots, I could see that you have configured both as a result of database:

  Windows database

  RADIUS Server token

  So we may be running into a situation where the authentication method used is not supported by the tokens, Radius servers, and therefore impossible to check the second database in the list:

  http://www.Cisco.com/en/us/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.2.1/User_Guide/UsrDb.html#wpxref36799

  http://www.Cisco.com/en/us/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.2.1/User_Guide/Overvw.html#wpxref846

  Kind regards

  Fede

  --

  If this helps you or answers to your question if it you please mark it as 'responded' or write it down, if other users can easily find it.

• How can I remove programs I already uninstalled the uninstall of a program from the list in windows 7 Home premium?

  I already uninstalled Google Drive, but it is still showing in my Uninstall list, twice. I am using Windows 7 Home Premium (SP1)

  Hello

  Refer to this link, try the steps and try it to uninstall Google drive to check if that helps:

  The process of installing or uninstalling a program may fail for several reasons. This article describes the following issues (click on each question for corresponding resolution):

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article: http://windows.microsoft.com/en-US/windows7/Back-up-the-registry

  How to solve problems when you install or uninstall programs on a Windows computer

  See also: steps to uninstall Google Reader for the desktop of your Windows PC or Mac application.

  It will be useful.

• 802. 1 x fails to authenticate

  Hello

  I have a user named "testuser" and trying to authenticate the xp computer but fails to authenticate. The journal of the ACS says authentication failed, the user is in the local database, but why it fails to authenticate?

  I have cisco switch:

  WS-C2960G-48TC-L 12.2 (52) SE C2960-LANBASEK9-M

  * 8 Mar 04:03:55.030: AAA/BIND (00000029): link i / f

  * 8 Mar 04:03:55.173: % AUTHMGR-5-START: start "dot1x' for the client (782b.cbc9.a027) on the Interface Gi0/2 AuditSessionID 0A6A00200000001924EBD428

  * 04:03:57.010 Mar 8: % LINK-3-UPDOWN: Interface GigabitEthernet0/2, changed State to

  * 8 Mar 04:03:58.016: % LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/2, until a state change

  * 8 Mar 04:04:05.482: % DOT1X-5-FAIL: failure of authentication for the client (782b.cbc9.a027) on the Interface Gi0/2 AuditSessionID 0A6A00200000001924EBD428

  * 8 Mar 04:04:05.482: % AUTHMGR-7-RESULT: authentication result "fail" to "dot1x' for the client (782b.cbc9.a027) on the Interface Gi0/2 AuditSessionID 0A6A00200000001924EBD428

  * 8 Mar 04:04:15.834: % LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/2, changed state down

  Authentic failed

  testuser

  Group 66

  78-2B-CB-C9-A0-27

  (Default)

  EAP - TLS or PEAP authentication during the SSL negotiation failed

  ..

  ..

  50002

  x.x.x.x

  ..

  ..

  25

  PEAP-MS

  ..

  
  mozdirty type = "_moz" >

  Hello

  Sorry my mistake. I'm assuming that you would use 802. 1 x for authetication wireless. As described here on ACS, LEAP only works only for the wireless RADIUS authetication.

  Also windows XP natively only support PEAP and token based authetication.

  Think so next time, you could try using free generated certificates on ACS for PEAP authentication.

  The link below will guide you how to install free signed certificates on the ACS.

  http://www.Cisco.com/en/us/products/sw/secursw/ps2086/products_configuration_example09186a0080545a29.shtml

  Hope that helps.

  Concerning

  Najaf

• To uninstall Oracle 11 g R2 Linux 6.6

  Dear forum helping!

  I have oracle 11g r2 installed on Linux 6.6 on VMworkstation 11.0.0 build-2305329

  initially do you less space when installing database, he gave me the low error disk volumes

  It will not be able to install the database configuration wizard

  Cancel or ignore

  I should have an abortion, but I chose to ignore that was my mistake

  Later I have a free memory

  Now I want to uninstall oracle 11 g linux 2

  found the link

  http://dbakevin.blogspot.in/2012/04/deinstall-Oracle-11g-on-Linux.html

  Can anyone tell

  using the. / deintsall

  I will be a loser

  (1) groups and users.

  (2) clean the oracle directory

  (3) you will need to reconfigure

  /Home/Oracle/.bash_profile

  / etc/oratab

  /etc/sysctl.conf

  As I have not installed the wizard of the Oracle Configuration

  (which was my mistake)

  is the the right option to run. / Uninstall

  When it fails to install Oracle it can leave ghost process behind that will avoid a re-installation. You have not specified a what you have exactly, but usually, it will be sufficient if you remove Oracle software as root, restart the system and try again:

  For example:

  # rm - rf/U01/U02 /u03

  # f/etc/oratab rm

  # rm f /var/opt/oracle/oraInst.loc

  # rm f/usr/local/bin/dbstart/usr/local/bin/dbshut

  # shutdown - r now

  There may be several files, which I do not remember all of the memory and it depends on what you have installed, for example, ASM, but I think that should do the trick for you to reinstall the software.

• How to uninstall Adobe Audition CC 2014 after the expiration date?

  Hello

  I use Adobe Audition CC 2014 for the last 30 days and I came to the conclusion that I didn't want to use it.

  Now I want to uninstall it, I can't. I get the error "failed to uninstall.

  The window prompted me to

  1 restart my PC (DONE)

  2. Quit all applications, including startup items, check virus and firewall (DONE)

  3 uninstall again (TRIED but failed)

  Any help or assistance is much appreciated.

  Try the Adobe cleanup tool:

  The Adobe Creative Cloud Cleaner tool allows to solve installation problems

  For Windows, you can also use Microsoft Fix tool:

  https://support.Microsoft.com/en-us/mats/program_install_and_uninstall

• Mac running very slow and stall

  Hello

  Grateul for any help you can give.  I searched the forums for advice and have tried several solutions but without success so far.

  I have a macbook pro, which is 3 1/2 years.  Used primarily for surfing the internet and word processing.  For the past 3 weeks, that it worked if slow, it is almost useless to try to use it at all.  All applications take a long time to load and even typing has a delayed response.  Safari crashes frequently.  As mentioned above, I searched the forums and followed the advice given for example using disk utility to repair disk and permissions of the drive (have been several attempts to realize that he has appeared to expire several times, but I came to the conclusion, with no improvement) / reboot in recovery mode / stop and hold shift/alt/cmd/delete etc..  Nothing I found so far has helped it's why I started a new thread asking for advice (I understand very well I'm not the first person to ask why my mac is slow!).

  Information that could help find a solution, a year or two ago I had to install sophos and tuneupmymac to access the e-mails from work.  I thought that the problem may be connected to either one of them so I uninstalled sophos, but I failed to uninstall tuneupmymac because advice online on the website of tuneupmymac do not appear to work (the option Uninstall does not appear where it is shown in the guide, and I can't find anywhere else), nor the advice I've seen elsewhere (when I type in the path to file to Library/preferences in ' ") go to the folder"it says not 'found').  The only other explanation I could think was that I could have picked up a virus from a memory stick friend used to transfer pictures about 4 weeks ago. The problems started shortly after, so it would make sense in terms of timing. Otherwise, I tried to complete the upgrade to El Capitan, as I thought that might help, but it can't seem to finish right now (probably because of issues that make my mac to run slowly).

  Am at a bit of a loss if it's a last cry for help before considering in the store!  All opinions are appreciated.  If I missed the obvious information, apologies - I'm a total novice.  Provide any additional information that might help identify the problem.

  Thank you very much

  Hi Ljmac19:

  Try to download and EtreCheck https://etrecheck.com/ and announced the results here. It can provide additional information.

  Kim