Uninstall CS4 does not not because the bridge/Updater 'open '.

Similar Questions

• Windows XP does not install the automatic updates.

  Original title: kopieerfout

  After several years, my laptop with Windows XP does not install the automatic updates, giving only a mistake:

  "

  ER is een doing opgetreden bij het van het bestand ntoskrnl.exe copying

  Kan het bestand niet naar doelmap copying.

  Everything works OK.

  Thanks for your help

  Everything works OK.

  It seems that it is not... Why Dutch? You use or have the corresponding language version installed?

  Free translation of message:

  "An error occurred during the copy of the file ntoskrnl.exe
  Cannot copy file to destination... »

  Please note that ntoskrnl.exe is a process in the cycle of the initial startup on your computer program.

  Try to load your "last known good configuration".

  The issue is also known to be caused by a short circuit in the ground cable into the keyboard cable. Make sure that it is not the cause of your error by replacing the keyboard with another keyboard or just disconnect the keyboard from the computer. You can also look at your function "Add or remove programs" If KB2686509 <> http://support.microsoft.com/kb/2686509 > is installed.  Install manually if it is not.

  If the above doesn't help, try using the Sfc.exe tool - see here > http://support.microsoft.com/kb/310747

  Or run the Chkdsk tool - see here > http://support.microsoft.com/kb/315265

  If still no luck, you may need to restore the file ntoskrnl. exe as follows:

  1 - insert the Microsoft Windows XP CD. Note: If you have a recovery CD or a restore CD and not a Microsoft Windows XP CD is probably the procedure below does not solve your problem.

  2 - restart the computer and that the computer starts, you should see a message press any key to boot from the CD. When you see this message press any key.

  3. - in the Microsoft Windows XP setup menu, press the R key to enter the recovery console.

  4 - Select the operating system you want to set and enter the administrator password.

  5 - type expand d:\i386\ntoskrnl.ex_ c:\windows\system32

  6. - you will be asked if you want to overwrite the file, type Y and press enter to replace the file.

  7 - type exit to restart the computer.

  Hope this helps - good luck!

• InDesign CS4 does not display the icon in the shape of triangle for the images changed into links

  My InDesign crashed the other day and now it gives me is no longer the yellow triangle icon in the links Panel to indicate that image has been changed and must be updated. I generally do not connect the image to the original through Indesign, but work independently in Photoshop. This has never been a problem. After that I updated the image in PS, the triangle appears instantly in ID in order to be able to click on it and update the image.

  I can always click on the Refresh button to update the image, but I wish that these rear indicators because it helps me with older documents - so that I can know what are the images really need to update and which are not.

  I restarted the Panel and launched and closed the bridge such as suggested in other older discussions, and he has not made a difference. I also noticed that if I try to open the original image by ID with open with, the icon for the PS, for example, doesn't think I'm in PS (it opens the image in Windowd Paint). It makes me wonder is the whole connection between ID and PS is messed up. How can I correct this connection?

  Have you tried to delete your preferences?  How it is here.

• calendar forms10g: does not, because the elements are required for the registration

  in the recording, I have items with the required property to Yes.
  
  View the calendar on the key-ListVal and triggers when mouse DoubleClick.
  
  When triggers are enabled, oracle shows me the following error FRM 40202 field must be entered. and I can not enter the date.
  
  That's why the record loses focus when the calendar appears.
  
  How do I keep my objects with the required property set to yes, without having the error 40202 frm.
  
  Steve

  Instead of using a different block for the calendar, you might create a separate fmb and CALL_FORM and a GLOBAL to view the calendar and intercat with her. In this way, the recording is loose not update and you will not get the error.

• does not install the new update for iTunes for windows 7 (64-bit)

  I have windows 7 on a 64-bit computer. I have installed, uninstalled and reinstalled iTunes more and more and more nothing helps. I get the same message every time... The Apple Mobile Device service does not start and displays error 1053 and an error 7 (windows 193).  Windows has been updated. I worked on it for 2 days! So frustrating! Ready to give up on Apple and Windows all together. I also fixed the registry, did a clean boot, and yet, I'm having a problem... Help!

  Hi all

  After uninstalling and cleaning everything about Apple, I installed this version (Special?):

  http://support.Apple.com/kb/DL1784?viewlocale=en_US&locale=en_US

  And it works on my Win 7 HP 64 - bit!

  Good luck!

• Why Adobe does not use the codec x264vfw open source for things like. AVI?

  Well we all know who wants to work with the x264vfw that does work in Premiere Elements.

  But I think Adobe might have to operate with the open source x264vfw or AVC-Intra coding Manager.

  I'm still wonder as to why it would work when I re - encode with another program to h264 in MP4 but again?

  Adobe goes really easy and messing with us. because they say there is support for h264 but only for MP4 and the other...

  Why they do not add. Support AVI, which goes to support of Adobe because I can't enter the livechat... because it is only of the week...

  This Codec the H264, X 264 and STROKE-1 are the most used codecs today, in my opinion, so I don't know why they don't sit their dev on it.

  It does not work on their $ 600 Application named Premiere Pro is something I do not understand...

  For me its amazing if I'm honest.

  Now, I want to know why adobe is such a service at this point.

  They all scream it, but Adobe does nothing.

  If someone knows a solution without re-encoding or FFMPEG, because it works well with my Variable rate in Premiere Elements let me know.

  Also, I want a response from Adobe, why they do nothing.

  I tried to put in plugins x264vfw .dll file or the folder, but the problem is not resolved.

  I sit to keep quiet for a while behind that and see how much son he existing... and it is more frustrating.

  ADOBE, it's time to do something!

  Sergadra

  As said, Adobe is the only one who can answer the type of questions you may have. And he does not here.

  Out of curiosity, I ask "have you contacted other manufacturers of video editing software and have been able to get the.

  Why answers to its marketing and strategy of the function defined for its current versions or future?

  Adobe feature/bug report form and a wait and see seems to be your opportunity of Adobe in this respect. So, you wait and see

  If your suggestion is coming in the next version. I'm not criticizing, just reporting what seems to be the 'what. '

  RTA

• I have controls Pro does not receive the volume update on the evolution of the patch

  Hello

  An I-controls Pro connected USB sending volume updated MainStage;  but does not not not the volume update on the evolution of the patch

  What is the tric?

  I have a screen midday traffic, MainStage send nothing

  Thanks in advance

  Best

  Cyril

  P.S. I have controls Pro receive volume update logic in mode 'Logic control '.

  Hello

  Depending on how you have all put in place, it should simply be a case of select controls in Layout Mode and choosing the correct MIDI port in the box "Send value to ' in screen control inspector

  

  TDC

• Automatic update system does not recognize the successful update.

  Regarding automatic updates.  I have 36 log entries to show the successful update of Windows Vista with Service Pack 1.  However, at least twice a day, I receive notifications that Windows Vista SP1 KB936330 is an important update, available for download.  How can I make the system of automatic updates (which I run my endorsement) recognize that this update is complete?

  Hi Dalbro1,

  Welcome to the Microsoft Answers site!

  You need to uninstall all installations of Service Pack 1 on your computer and install the standalone service pack1 manually.

  To uninstall the service pack use utility Windows install cleanup, which will remove all facilities from your computer.

  To install Windows Install Cleanup Utility follow the below given link.

  Description of the Windows Installer CleanUp utility

  http://support.Microsoft.com/kb/290301

  Manually download and install visit Service Pack the below given link.

  How to obtain the latest Windows Vista service pack

  http://support.Microsoft.com/kb/935791

  Once it is finished downloading the pack of autonomous before installing the service pack disable security software, the system n clean boot, and then install the stand-alone pack. Once the installation is complete normal startup mode and re activate the security software.

  If you are not able to perform the above steps then you will need to take your computer to the technical workshop and get it rectified.

  The steps to perform a clean boot are given below:

  1 log on to the computer using an account with administrator rights

  2. click on start, type msconfig.exe in the start search box and press ENTER to start the System Configuration utility.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue

  3. on the general tab, click Selective startup, and then clear the check box load startup items. (The check box use the file Boot is not available.)

  4. on the Services tab, click to select the skin all the Microsoft services check box, and then click Disable all

  Note: Following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use with existing restore points system restore utility

  For more information about the clean boot, follow the below given link: how to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  When you have completed the installation of the service pack, follow these steps to reset the computer to start as usual:

  1. click on start, type msconfig.exe in the start search box and press ENTER.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  2. on the general tab, click the Normal startup option, and then click OK.

  3. When you are prompted to restart the computer, click on restart

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• New installation of Windows 7 Professional 64 bit does not install the Windows updates

  I tried it twice.  I install Windows 7 Professional 64 - bit on a ThinkPad T61.  After installation and activation successful Windows, I tried Windows updates.  The 'check updates' never ends.  After the first installation of Windows, I tried all sorts of bugs found either here or other Windows Help Web sites, does not.  So I reinstalled Windows, but with the same result.

  After that the first installation was impossible to install updates, I received the Windows Update stand-alone Installer and downloaded the stand-alone files for updates.  Would install things like IE updates, but no security update would install, as well as most other updates.  Yet once, just standalone Setup would continue to search for already installed updates without ever ending.

  Does anyone have an idea how to solve this problem?

  Thanks for the comments.  It's good to hear that you have actually solved the problem.

• Windows store does not download the app updates

  I can't get the APP store to work and I'm also not able to get my PC to download the updates that it must, it's been 2 months that updates have been downloaded. And why have we not physically go to settings to get the downloads? Should not the PC do what he's done before and just automatically download? I have my computer set up to do and it still don't do it at all. I am also thinking maybe someday a MAC book.

  Lynn

  Hi Lynn,

  Thanks for posting your question on the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  1. what happens when you open the Windows store? You receive an error message or code?
  2. you made any hardware or software changes on your computer before the show?

  Thank you for details on the issue.

  This problem may occur due to corrupted Windows store files or parameters.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run Troubleshooter app and check.
  See this link:
  http://download.Microsoft.com/download/F/2/4/F24D0C03-4181-4E5B-A23B-5C3A6B5974E3/apps.diagcab

  If you continue to have problems with a soft, or if you are unable to open the Windows store, you can use 'App store'. This tool can automatically identify and fix problems with applications and Windows store.

  If this does not help, use method 2.

  Method 2:
  Please use the suggestions contained in this Microsoft support article and check the issue.
  Reference:
  Why I can't update in the store?
  http://Windows.Microsoft.com/en-us/Windows-8/why-can-t-find-update-store

  See also:
  Why can't find or install the application on the Windows Store?
  http://Windows.Microsoft.com/en-us/Windows-8/why-find-install-app-Windows-store

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Lightroom 3 "Edit in photoshop CS4" does not retain the values of 'detail '.

  Hi all

  I give a try lightroom 3 (finally...), but has noticed that when I have an image to which I applied 'detail' adjustments to reduce the luminescence and color, using "Edit in Photoshop CS4" noise opens the image without the detail adjustments applied. I don't see the option to choose whether to change 'image' or 'image with the lightroom settings' any place and I'm scratching my head trying to find an option in the preferences (prefs both LR and catalog) that allows me to choose 'change with lightroom applied settings '.

  In this way, it is a bit useless.

  Does anyone know how to ' Edit in...» "for lightroom 3 always apply the corrections to image to the copy of the edition?

  Choose rendering with option of Lightroom - not thatdisplay? By default "Edit with" uses the version of Photoshop to Adobe Camera Raw and CS4 is older than LR3.

• CS4 does not recognize the MPG files that it captured previously

  Hello

  I have spent some time in the knowledge base and search the Forum, but don't see anything that could help me.

  Windows 7 64-bit on Intel I - 7 920 quad 12 GB of ram CS4 version 4.2.1.  This problem developed there months after installing the suite CS.  Other than what is explained here, there were no changes to the operating system or CS4.

  The problem is that CS4 has ceased to recognize imported MPG files to a HDV camera about a month, using the PrPro capture utility (F5?).  These files have been imported into the project and then treatment Panel (MIC, effects, etc.) on a 64 THAT HDV preset timeline minute.  The entire sequence has been made and read successfully.

  After completing the sequence, I exported it with SOUL to create the elementals of blue ray MPEG to add in yet.  The TEA code finished without obvious mistake.

  Then I created a project again and tried to add the asset - an audio and a video file.  The audio file is added without problem.  Importing video files failed 99% with encorr and Windows hung.  Power off required stop.

  Suspecting a problem with the video file, I open the video file in Windows Media Player and it played ok.  (I note here that this was the first time on this machine that I used WMP, and he did a few configuration steps?)

  I tried yet again without success.  At the next reboot, I open the windows task manager and placed on the second screen so I could watch the CPU to use.  The use of the CPU ran 3 to 8% but when still hung, grew the Task Manager

  I have uninstalled and reinstalled again and SOUL and then upgraded for current levels of the rev.  Same answer as before.

  Based on a post on the site again, I deleted the cache of media key in the registry and rebooted.  Always without success.

  At this point, I decided to see if one of these manipulations had affected the PrPro project.  The project, the sequence and the project Panel all come up as before.  However, all the MPG files were marked OFFLINE.  AVI files and PSD image files were unaffected - they remain linked. These files are all on the HARD disk in the PC itself - no removable disks or network

  I tried to re bind the file by clicking on the main capture file, but each attempt resulted in the error message "unsupported format". or corrupted file.

  Using WMP, I found that the files were not damaged.  I also confirmed that ADobe had recreated the media cache keys and was in fact identified files files.

  I tried to reimport the original capture file and received the same error message.

  I have paid full CS4 and I confirmed that I had options MPEG, when I created a new project.

  For now, I'm more interested fixed the PrPro reason no longers recognizes MPG files he captured, processed and made yesterday. I will fight the problem still on this site.

  Everyone knows this or can make a suggestion how to fix this?

  I do not see why reinstall again and SOUL would have caused this.  I can suspect WMP.  Where can I find which codecs are charged and their priority? What is the codec for prpro would look? MainConcept?

  I intend to use Gspot to see this as code mpg files - need the codec used by adobe.

  Any help you give would be appreciated.

  I can help you with one of those - project files/folders are intact. I am paranoid that I save things like that, even if they should not be affected in some way.

  Like the Adobe Clean Script, run several times is designed to eliminate all things Adobe CS4, I don't know how it might affect the other Adobe programs in a suite. Maybe others can give you a definitive answer.

  I also usually recommend run a cleaner registry, like CCleaner (and to let the default registry backup first), before the reinstall. IIRC, a user had a problem with him, but could have been OE, as most of the users here swear by it, and I've never had a problem (always do the backup of the registry but).

  Good luck and sorry for the bad news. Maybe someone from Adobe can shed more light on why, but I have yet to hear of what happens with CS5, so maybe all that has allowed the reversion has been fixed.

  Furthermore, it seems important to make all updates immediately after reinstalling, before launching the program. It is in any case the recommendation.

  Hunt

• CS4: Does not mask the layer effects. Bug?

  If you have an image of say a person and an effect (a drop shadow maybe) and then apply a layer mask on the size of the feet, the result should be the size up anyone with a fading shadow identical to the person. That's how CS3 it.

  NOT SO, in CS4. With CS4, the layer mask not "mask" effect. So, you get dark legs, but the body is hidden.

  I'm positive, it's a bug, because I can open the bad image of CS4 CS3 AND it seems correct.

  Attached is the same file I created in CS4 (with shadow to come through transparent surface) and then he opened in CS3 (clean, no shade).

  Since you are positive it is a bug, I guess that there is no sense, which suggested that referred you to your dialog layer styles, click on the merge options panel and click layer mask hides in advanced mixing options. Bugs must be fixed by engineers, not the users, so I think that this post is a waste of your time.

• CS4 does not select the style of the previous line of the pen tool

  When I used the pen tool in CS3 I could select any style of line (for most of the arrows) and be able to make the new line wih this style. In CS4 it creates just a black line each time with the same thickness.

  In the appearance Panel, click the drop-down (top-right) and deselect new Art has basic appearance.

• When I open Control Panel it me does not check the system or open Security Center.

  When I go to the control panel to do a "System Restore" or a "control system", it will not open for me.
  Application not found.
  Can someone tell me how to erase or get rid of it.
  I get this error message C:\WINDOWS\system32\rundl32.exe what someone knows how can I remove the problem I can do the updates.
  Thank you

  Hello

  · Were there any changes made on the computer before the show?

  · Who is the service pack installed?

  You can follow the steps listed in the link below: cannot find the Rundll32.exe file when you open the control panel: http://support.microsoft.com/kb/812340

  If any malware or virus detected on the computer activity, run also, check and online virus scan. You can run the scan for viruses online from the link below: http://www.microsoft.com/security/scanner/en-us/default.aspx

  NOTE: Make sure that you select the correct version of the operating system before downloading the scanner)