Help with multiple tasks on cDAQ9184
I have a CDAQ9184 chassis with 3 different analog input modules installed. I read somewhere that I need a separate task for each type of module, but when I try to do, only the tasks (last creation) will actually.
I tried all 3 modules within one of the tasks of reading, but it does not work.
Can someone please tell me if I run 3 task on a cDAQ9184 chassis and if not, what should I do to read the three analog modules?
FYI, I use C++ and not of LabView
Thank you
You can run up to 3 jobs HAVE independent, but it is not mandatory. You can also put the three modules in the same task.
It seems that you have not had luck with both approaches, although I couldn't say why without additional information. Could you post your code showing how you set up the task (s)? Also, what error do you get?
Best regards
Tags: NI Hardware
Similar Questions
-
Need help with multiple certificates in a course.
Hello. I'm new to Captivate.
I'm working on a course where there is more than one certificate at the end of the course. This is because it is a training course, but is taken by people who, although they do the same exact material, have different requirements on their certificates according to their profession. My problem is that I have to lead the student to one of the three certificates. Is that what I can have a drop down at the beginning of course where the student chooses their profession, then based on this variable, goes to the appropriate end of the course after certificate that they have completed the quiz? Thank you!
Hello
Thank you to the Adobe community.
You can perform the task mentioned above using advanced actions. You can create a fast action with clues.
For example: you can put a box of text at the beginning of the project with captions for their respective profession. You can give to each profession, a trade for example, id 1 to 11, profession 2 id has 12 and so forth.
Now the user will enter the id in the text entry box and it will speak to a particular section of the course according to their profession.
You must use this advanced action on the text input area.
Please refer to the below images:
The first page:
The advanced Actions panel:
Where on 11, 12 and 13 at the top are the clues for profession 2 and 3.
I hope this helps!
Thank you!
-
Help with multiple locations on a XY graph under certain conditions
Hi, I have a question about manipulating a XY Chart.
(1) whenever the plot crosses the x-axis for value go to the top, I want the plot to change color, so that it crosses 0 will go back to the top, and I want that specific portion having a different color. It's really hard to explain, so I'll post a picture:
[URL =http://img691.imageshack.us/i/xygraphexample.jpg/] [IMG] http://img691.imageshack.us/img691/4540/xygraphexample.jpg [LINE] [URL]
As you can see, if the graph we cross the x-axis by decreasing, it should not change color. Only increase.
I can't understand how to do this. I know it will take more than one location, but how would I randomly change the color as well as detect if its path that goes to the top or not.
Any help would be appreciated.
Thank you
OK - chance I'm not too busy today...
Usually, I use either screw express, but was looking for a quick solution for you.
Here's the sample made with only the basic trigger function - no express VI.
Also added a selectable threshold by the user.
Then, on the space between the plots, if there is no data in the original, there no data in the colors either.
See second attachment
-
When I click CTRL/ALT/DELETE I can't see my task manager? I see a green box on my right side of my toolbar, but I can't access the Task Manager? I don't know if I've accidentally changed a setting, but I need some help please?
This green box is reduced Task Scheduler. Double-click on this green area to fully open.
-
Help with multiple video Source on DVD
I'm new to first 9 trying to make a DVD of a birthday party with the video from my Canon Vixia HF200 and a slideshow that I exported from iPhoto to an m4v file. It is my understanding from reading messages earlier I have to export the Flash movie, I did apart and export 'for display on computer or do DVD"and then do the same for the slide show. But instead of an avi file, it is a flv file and I'm unable to open or import the first page 9 to create a DVD. I'm really confused on how to put these two files together to make a DVD. (I can not put everything together on the same project?) I have an iMac computer and am used to make films in iMovie where you can simply add clips from various sources and then export to iDVD. I find it difficult to get the help that I need in the Help menu of the program. I know I have to do something wrong. Please help if you can.
I'm confused myself.
Yes, you can get out the WebDVD from the same project, that you left your MPEG.
-
Help with multiple Gradients on the layer mask
I was watching a tutorial and I saw someone using multiple gradients on the same layer mask. When I try everything that is happening, it's photoshop to erase the last of them, I applied. An example would be using a gradient on the four corners of an image, but of different variations.
Any help is appreciated!
I use CS4, I don't know if that makes a difference?
Or multiplying the mixture on the gradient. Screen to display
-
Help with multiple parameter search recordset
I have a mysql table that is sought by both city and State fields
using dreamweaver, I've created a form with a text field as a city as well as a list as State and me passed with the get method.
The problem is on the results page, I have a Recordset, SELECT * FROM table name. What I do with the WHERE, I tried several configurations, and I can't get anything to work. I only want to search by two fields, city and State. The State must be, but if the city is empty, I still want to filter by status.
Can someone help me or point me in the right direction, please?Thanks, but I understood my problem and I no longer need help.
-
Need help with multiple eventListeners
I saw a script here yesterday, but can't seem to find it. He showed abunch of eventListeners at the bottom of the script. To save, save, etc... I know it is very vague and I am sorry for that but I want to see how I can implement multiple event listeners in my script.
I believe you are referring to all the events for which you can add event listeners
If this is the case, then find following is a kind of cheat sheet to refer to.
I've categorized according to DOM objects this list is not exhaustive.
Application Document
Link
PrintEvent
Toolbox
PageItem/TextFrame.
Rectangle/TextPath.
XmlStory/history
afterActivate
AfterClose (Apresfermeture)
afterContextChanged
afterQuit
afterSelectionAttributeChanged
afterSelectionChanged
beforeDeactivate
beforeNew
beforeOpen
beforeQuit
afterActivate
afterExport
afterImport
afterLinksChanged
afterNew
afterOpen
Subsequent
afterRevert
afterSave
afterSaveAs
afterSaveACopy
beforeClose
beforeDeactivate
beforeExport
beforeImport
beforePrint
beforeRevert
beforeSave
beforeSaveAs
beforeSaveACopy
failedExport
afterAttributeChanged
afterDelte
afterEmbed
afterMove
afterNew
afterUnembed
afterUpdate
beforeDelete
beforeEmbed
beforeMove
beforeUnembed
beforeUpdate
beforePrint
Subsequent
afterAttributeChanged afterPlace
beforePlace
-
Help with multiple 'if' statement
If 'age' is greater than 17 and 'relationship' is also one of the other options as son or daughter, I would a subform to appear. Java or formcalc will be fine. Thanks for any help.
Hello
FormCalc script might look like:
if (Age gt 17) then if (relationship eq "son" or relationship eq "daughter") then subform.presence = "visible" else subform.presence = "invisible" endif endif
-
Hey all,.
I am trying to add a series of line to an areaChart (Cartesian actually)
I can easily add the second series via action script or tags.
The problem occurs when I try to update the series online. Each time series of line data are changed the main series of plot runs its animation (slide).
Is it possible to update the series line without enacting the plotseries animation?Solved.
What I did to remove the animation from the series, whenever the line series was created.
Because the data in the chart could change only when a user moves a slide I added animation when the mooused of the user down on the slide.
-
HP Photosmart 5514: HP Photosmart "in use with another task' error.
I'm sure you're all sick to see these questions, but I have not found that a reliable solution among the responses presented anywhere else on the internet.
I have a printer HP Photosmart 5514, part of the 5510 B111 d e-all-in-one printer series, and it currently only allow me to scan a single document (with multiple pages). I connected via USB, not the network connection. My current operating system is Windows 10, 64-bit. I've uninstalled and reinstalled the drivers several times, using different methods: a part of the HPSolutionsFramework, installation of the manual pilot on its own and even with the method of detection of device HP Support Assistant. I tried the most common answer of "unplug, restart the computer, plug in. I also tried printing HP and doctor Scan to see if there is a driver problem but it clears all controls and nothing seems to be wrong. To be clear, restarted my computer "solve" the problem, even temporarily and no is not a final solution to my problem.
Explanation of the issue:
I run the HP Photosmart 5510d series software and click on the button "scan a Photo Document or". When the window opens, I click on "scan document to the file" and proceed to scan my document with however many pages, adding each page I want. When I'm finished, I hit 'save', my backup file and click 'done '. When I proceed to scan another document, hit the button causes nothing happen but one his mistake. When I start printing HP and Scan doctor and trying to do an analysis of test after he tells me that everything is going well, I get the error message:
"The HP scanning application is currently in use with another task or another user on this computer. Please wait until the other task is finished, and then try again. »
To be quite clear, there is no other task that I'm aware of in addition to the fact that somehow the software does not seem to let go of the analysis. There are no other users who use the computer outside of me. There is no other hidden running application. I went through the Task Manager to kill all the associated HP process to see if something it stops to run again. The only chance I have is with my computer restarts, but it would be foolish to scan documents of mass and restart after each.
It worked properly on my other hard drive with the same version of Windows 10 installed on it. 10 Windows installed on a new drive and it does not appear to want to work after 1 document.
If anyone has a help in this case, it would be greatly appreciated.
Hi @Yenroh,
Welcome to the Forums of HP Support!
I see that you are able to scan with your HP Photosmart 5514 printer wireless. I'd be happy to see this with you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.
Generally speaking, the reason why you get "the HP scanning application is currently in use with another task or another user on this computer. Please wait until the other task is finished, and then try again. "is because that the network signal is lost the connection and the freezing of the task analysis or the previous scan operation never ended.
Please, try the steps in these guides:
- Scan network connection is lost (Windows)
- "Scan cannot be performed because another program or computer uses the network device" message in Windows when scanning on a wireless network
TIPS:
- Move the printer and the router more closely in order to improve the quality of the signal.
- Change the channel on the router wireless.
Ensure that your router and firewall do not block these ports.
- Scanning: The UDP port: 427 TCP ports: 9220, 9500
Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!
-
Need help with editing "domain": DAC
Hello
When I put together a field:
I had a pop window to "Configuration Tags" with the following message:
The tasks belonging to the following Configuration tags may apply
for the Assembly of your domain. If you want to associate these tags,
Press Cancel, otherwise press to continue.
For this message, I should say "Continue" or "Cancel".
Also what happens when I say "Continue" or "Cancel". ?
Thank you
RambeauHi, tag Configuration DAC control inclusion of tasks in the areas. Each configuration will have tasks related to requirement specific biapps.
Default BIAPPS OOTB areas will have tags associated Configurations and few will be in idle state.
(Click on any area of DAC--> ConfigurationTag (in the lower pane) to check that result from the Configuration Tags)1. this message is just a reminder that DAC said you, there are a few other tasks that can be included in the area in question and that the associated with these tasks Configuration tags. In case if you forgot to add them click 'Cancel', add it and then go back up
2. in all other cases, if you do not need to add these Configuration tags you can press continue to finish the Assembly of the area in question
Depending on the requirement and tasks that need you to include or exclude specific topic area.
Before mounting check if you must include a Configuration, activate it, and then click on go.For example: in the Configuration of BIApps topic: to charge the time Dimension Tables after the Data Warehouse is responsible
1. to extend the size of the day, you must include a configuration named * "extend day Dimension multiple calendar Support." * which adds additional specific tasks. Then assemble the area in question
I hope this helps!
-
Help with account permissions / Yosemite
Looking for help well informed with a pesky question of Yosemite...
I have an old Mac with multiple disks, and I try to get the most recent versions of Mac OS X installed and working properly.
The hardware and OS details:
- Mac Pro 4.1 ("cheese grater")
- 3 hard disks 1 to
- Machine has been (and is still) 10.6.8 Snow Leopard as its main operating system running. It's on HD #2. That works very well, though obviously limited the age (old apps). I need to keep this as a configuration to boot can be used - in other words, I need to preserve the ability to boot from the HD #2 in 10.6.8 as this is currently my workplace every day and will probably continue for a while.
Last year, I installed 10.10.3 Yosemite on internal HD #1. I initially had some difficulties to be able to switch between the boot disks, but am now able to choose with reliability drive/starting system at startup via the Startup Manager (boot, invoking the Boot Manager, I choose #2 with 10.6.8 HD or HD #1 with 10.10.3).)
So far so good.
Everything works well when it is started on the 10.6.8 by car.
When it is started off the coast of the 10.10.3 drive, there is account/permissions issues that prevent me from using it for something meaningful. That's what I'm trying to correct now.
Note that I installed 10.10.3 on HD #1 for over a year and I've never used for anything - that the drive is empty other than the operating system. If I need to blow this facility, I can do.
The problem: I am currently not able to install apps on HD #1 (after starting on #1 with 10.10.3). HD When I try to install anything, the operating system will appear an authentication dialog box: '< name of install App > wants to make changes. Type of administrator name and password to enable this. »
I get my account name and PW (which I have always used for everything on this machine for ever), and it fails.
Research in system preferences > users and groups, I see not what probably is the problem: my account is a "Standard user", not an administrator account. There is no listed administrator account (in fact, no other users listed, other than the "Guest", which is disabled). I don't know how he got in this State, I was always the administrator on this machine, and I guess it would have copied accounts and permissions of the 10.6.8 installation, or otherwise if he asked me about this information during the installation I took myself as an administrator. In any case, my user account is now "Standard", which is probably the cause of the current unrest. I am constantly invited to enter a log in admin whenever I try to do anything (a 'function' rather annoying but lets not go). This machine is my home, nobody else is going to have physical access to it, no children in the House, that's for sure, I prefer to ignore as many log-ins required security etc. as possible, but for now, I just get my user configured as an administrator account.
What is the best way to achieve this?
As I said, I have nothing invested in the current installation of 10.10.3 HD # 1, this player is all-but-empty and I can blow that installation (and re - format the drive) if it's the easiest path. But it is extremely important that I have the integrity of the other disk, HD #2, which is running 10.6.8 and has important data and apps on it. I want to make sure that everything I do with or HD #1 and 10.10.3 is no impact on the #2 HD and my ability to boot from 10.6.8 on it.
(I also have a third 1 TB internal disk (HD #3). This player is 100% empty and unused. After I get the permissions of the account/fixed on HD #1 with 10.10.3, I would then install 10.11 El Capitan on HD #3 - and have the ability to boot to one of the three systems - but I'll keep my questions on that until I have the 10.10.3 sorted issues.)
Then... I guess the only real issue here that I need to address is the fact that my user account on #1 on 10.10.3 HD is not an admin (no?) account. If this is the case, what is the best way for me to fix this?
Thank you very much in advance for your help - it is much appreciated.
Can you unlock the preferences system/users and groups? If so, you should be able to give administrator privileges. See if something in this article helps you. Since you have nothing else on the disc, if all else fails, delete and reinstall. Setup Wizard will allow you to create an admin account.
Make a backup, best 2 separated on 2 discs. Start of recovery volume (command - R on a restart, or hold down the option/Alt during a restart and select the Volume of recovery). Run the check/repair disk utility and repair permissions until you get no error. Reformat the hard disk using Disk Utility/Erase Mac OS extended (journaled), then click on the Option button and select GUID. Then re-install the operating system.
-
Help with horror? El Capitan Mac
Hello, I have major issues with horror. It interferes with almost all of the process: navigation (Firefox or Chrome), MS Office, Adobe Pro, Finder... I ran a report EtreCheck (see below) and the major problem seems to be Firefox. I was wondering if someone could take a look at this and make other suggestions.
Thank you!
EtreCheck version: 3.0 (300)
Report generated 2016-08-12 12:44:23
Download https://etrecheck.com EtreCheck
Time 06:53
Performance: average
Click the [Support] links to help with non-Apple products.
Click the [details] links for more information on this line.
Problem: Beachballing
Description:
Beach ball with Firefox, Chrome, MS Office, Adobe Pro, Finder
Hardware information: ⓘ
MacBook Pro Intel Core i5, Intel Core i7, 13 "(mid-2012)"
[Technical details] - [User Guide] - [warranty & Service]
MacBook Pro - model: MacBookPro9, 2
1 2.5 GHz Intel Core i5 CPU: 2 strands
8 GB of RAM expandable - [Instructions]
BANK 0/DIMM0
OK 4 GB DDR3 1600 MHz
BANK 1/DIMM0
OK 4 GB DDR3 1600 MHz
Bluetooth: Good - transfer/Airdrop2 taken in charge
Wireless: en1: 802.11 a/b/g/n
Battery: Health = Normal - Cycle count = 38
Video information: ⓘ
Graphics Intel HD 4000
LED Cinema Display 1920 x 1200
System software: ⓘ
OS X El Capitan 10.11.6 15G (31) - since the start time: about 3 days
Disk information: ⓘ
HTS545050A7E362 disk HARD APPLE disk0: (500,11 GB) (rotation)
EFI (disk0s1) < not mounted >: 210 MB
Macintosh HD (disk0s2) /: 499,25 (Go 150,27 free)
Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB
MATSHITADVD-R UJ - 8À8)
USB information: ⓘ
RD Slim BUP Seagate 2 TB
EFI (disk1s1) < not mounted >: 210 MB
SEAGATE External 2 to (disk1s2) Volumes/external Seagate 2 Tb: 2.00 TB free 1.20
Apple Inc. Apple LED Cinema Display
ISight Apple Display Inc.
Apple Inc. Apple's USB audio device
Apple Inc. FaceTime HD camera (built-in)
Apple Inc. Apple keyboard / Trackpad
Computer, Inc. Apple IR receiver.
Apple Inc. BRCM20702 hub.
Apple Inc. Bluetooth USB host controller.
Hub keyboard Apple, Inc.
Logitech USB-PS/2 optical mouse
Apple Inc. Apple Keyboard
Information crush: ⓘ
Apple Inc. Thunderbolt_bus.
Goalkeeper: ⓘ
Mac App Store and identified developers
Kernel Extensions: ⓘ
/ Library/Extensions
[loading] com.sophos.kext.sav (9.4.52 - SDK 10.9 - 2016-08-05) [Support]
[loading] com.sophos.nke.swi (9.4.53 - SDK 10.9 - 2016-08-05) [Support]
Launch system officers: ⓘ
[loaded] 8 tasks Apple
[loading] 152 tasks Apple
[operation] 65 tasks Apple
[killed] 13 tasks Apple
13 killed process lack of RAM
Demons of launch system: ⓘ
[loaded] 46 tasks Apple
[loading] 150 tasks Apple
[operation] 89 tasks Apple
[killed] 6 tasks Apple
6 killed process lack of RAM
Launch officers: ⓘ
[no charge] com.adobe.AAM.Updater - 1.0.plist (2016-05-02) [Support]
[operation] com.brother.LOGINserver.plist (2016-03-10)
[loading] com.gog.galaxy.commservice.plist (2016-04-24) [Support]
[failure] com.maintain.PurgeInactiveMemory.plist (2016-06-09) [Support]
com.maintain.Restart.plist [no charge] (2016-06-09) [Support]
com.maintain.ShutDown.plist [no charge] (2016-06-09) [Support]
[operation] com.maintain.SystemEvents.plist (2016-06-09)
[operation] com.sophos.uiserver.plist (2016-05-12)
Launch of the demons: ⓘ
[performance] BESAgentDaemon.plist (2016-05-16)
[loading] com.adobe.fpsaud.plist (2016-06-28)
[loading] com.gog.galaxy.clientservice.plist (2016-04-24) [Support]
com.maintain.HideSpotlightMenuBarIcon.plist [no charge] (2016-06-09) [Support]
[loading] com.microsoft.office.licensing.helper.plist (2010-08-25)
[operation] com.prey.agent.plist (2016-05-17)
[operation] com.sophos.common.servicemanager.plist (2016-05-12)
Launch User Agents: ⓘ
[loading] com.adobe.ARM. [...]. plist (2016-04-22)
[loading] com.bittorrent.uTorrent.plist (2016-04-19) [Support]
[loading] com.google.keystone.agent.plist (2016-07-11)
[operation] com.spotify.webhelper.plist (2016-08-10) [Support]
[loading] com.valvesoftware.steamclean.plist (2016-07-14)
org.Hola.VPN.plist [no charge] (2016-08-01) [Support]
User login items: ⓘ
iTunesHelper Application (/ Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
ClipMenu application (/ Applications/ClipMenu.app)
Agent application of file transfer Android (~/Library/Application Support/Google/Android File transfer/Android File Transfer Agent.app)
MightyText application (/ Applications/MightyText.app)
Internet Plug-ins: ⓘ
AdobeAAMDetect: AdobeAAMDetect 1.0.0.0 - SDK 10.6 (2016-05-02) [Support]
FlashPlayer - 10.6: 22.0.0.209 - SDK 10.9 (2016-07-13) [Support]
QuickTime Plugin: 7.7.3 (2016-07-29)
AdobePDFViewerNPAPI: 11.0.15 - SDK 10.6 (2016-05-02) [Support]
AdobePDFViewer: 11.0.15 - SDK 10.6 (2016-05-02) [Support]
Flash Player: 22.0.0.209 - SDK 10.9 (2016-07-13) [Support]
Default browser: 601 - SDK 10.11 (2016-07-29)
SharePointBrowserPlugin: 14.6.6 - SDK 10.6 (2016-07-28) [Support]
Silverlight: 5.1.50428.0 - SDK 10.6 (2016-07-29) [Support]
The internet user Plug-ins: ⓘ
Picasa: 1.0 - SDK 10.6 (2015-10-13) [Support]
3rd party preference panes: ⓘ
Flash Player (2016-06-28) [Support]
Time Machine: ⓘ
Automatic backup: YES
Volumes to back up:
Macintosh HD: Disc size: 499,25 GB disc used: 348,98 GB
Destinations:
TB external Seagate 2 [Local]
Total size: 2.00 TB
Total number of backups: 29
An older backup: 15/05/16, 06:27
Last backup: 12/08/16, 11:45
Size of backup drive: Excellent
Size of backup 2.00 TB > (disk size 499,25 GB X 3)
Top of page process CPU: ⓘ
35% firefox
11% kernel_task
7% mdworker (13)
4% WindowServer
2% BESAgent
Top of the process of memory: ⓘ
GB firefox 3.08
Kernel_task 848 MB
180 MB mdworker (13)
90 MB Microsoft Word
Finder 82 MB
Information about virtual memory: ⓘ
24 MB of free RAM
7.98 GB RAM (1.31 GB being cached) used
3.01 GB used Swap
Diagnostic information: ⓘ
August 12, 2016, 12:24:55 PM/Library/Logs/DiagnosticReports/SophosWebIntelligence_2016-08-12-122455_ [redact ed] .crash
/ Library/Sophos Anti-Virus/SophosWebIntelligence.bundle/Contents/MacOS/SophosWebIntelligence
August 12, 2016, 12:00:06 PM/Library/Logs/DiagnosticReports/SophosWebIntelligence_2016-08-12-120006_ [redact ed] .crash
August 11, 2016, 01:40:07 PM/Library/Logs/DiagnosticReports/SophosWebIntelligence_2016-08-11-134007_ [redact ed] .crash
August 11, 2016, 10:17:21 /Library/Logs/DiagnosticReports/tcosrj_2016-08-11-101721_[redacted].hang
/ Volumes/VOLUME / * / Romeo & Juliet.app/Contents/MacOS/tcosrj
August 11, 2016, 06:33:30 /Library/Logs/DiagnosticReports/_2016-08-11-063330_[redacted].crash
???
August 10, 2016, 13:44:38 /Library/Logs/DiagnosticReports/firefox_2016-08-10-134438_[redacted].cpu_resour ce.diag [details]
/Applications/Firefox.app/Contents/MacOS/Firefox
August 10, 2016, 06:43:13 AM/Library/Logs/DiagnosticReports/SophosWebIntelligence_2016-08-10-064313_ [redact ed] .crash
9 August 2016, 15:17:53 self-test - spent
First uninstall Sophos. Anti virus apps are not necessary and may cause problems. Remove the bittorrent as well. It can be a source od malware.
-
help with a lazy slow macbook pro
Hi, I was wondering if someone with a good understanding of the EtreCheck might be able to help me with my old powerbook, rusty.
Here is the report copied and pasted from the EtreCheck diagnosis that I just ran (lots of red type):
Thank you!
EtreCheck version: 2.9.13 (267)
Report generated 2016-07-30 19:29
Download EtreCheck from https://etrecheck.com
Time 09:23
Performance: Below average
Click the [Support] links to help with non-Apple products.
Click [details] for more information on this line.
Verify the signatures of Apple: enabled
Problem: Beachballing
MacBook Pro (15-inch, mid 2009)
[Data sheet] - [User Guide] - [warranty & Service]
MacBook Pro - model: MacBookPro5, 3
1 3.06 GHz Intel Core 2 Duo CPU: 2 strands
8 GB of RAM expandable - [Instructions]
BANK 0/DIMM0
OK 4 GB DDR3 1067 MHz
BANK 1/DIMM0
OK 4 GB DDR3 1067 MHz
Bluetooth: Old - transfer/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Battery: Health = Normal - Cycle count = 342
NVIDIA GeForce 9400M - VRAM: 256 MB
Color LCD 1440 x 900
Cinema HD Display 1920 x 1200
NVIDIA GeForce 9600M GT - VRAM: 512 MB
OS X El Capitan 10.11.6 15G (31) - since the start time: about 3 days
ST9500420ASG disk0: (500,11 GB) (rotation)
EFI (disk0s1) < not mounted >: 210 MB
ShiftySeven II (disk0s2) /: 499,25 GB (56,75 GB free)
Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB
MATSHITADVD-R UJ-868)
Built-in ISight from Apple Inc..
Hub keyboard Apple, Inc.
Apple, Inc. Apple Keyboard
Card reader Apple
Apple Inc. Apple keyboard / Trackpad
Computer, Inc. Apple IR receiver.
Apple Inc. BRCM2046 hub.
Apple Inc. Bluetooth USB host controller.
Mac App Store and identified developers
/Applications/AirParrot.app
com.squirrels.airparrot.framebuffer [no charge] (1.4 - SDK 10.8 - 2014-04-19) [Support]
/ Applications/Caplio Mounter.app
[no charge] jp.co.ricoh.kext.caplio - 10.3 (4.0 - 2008-11-21) [Support]
[no charge] jp.co.ricoh.kext.caplio - 10.4 (4.0 - 2008-11-21) [Support]
DiskWarrior.app
com.alsoft.Preview [no charge] (4.1 - 2007-12-31) [Support]
/ Service.app incompatible software/Parallels
com.parallels.kext.prl_hid_hook [no charge] (4.0 3844.408728 - 2012-12-27) [Support]
com.parallels.kext.prl_hypervisor [no charge] (4.0 3844.408728 - 2012-12-27) [Support]
com.parallels.kext.prl_netbridge [no charge] (4.0 3844.408728 - 2012-12-27) [Support]
com.parallels.kext.prl_usb_connect [no charge] (4.0 3844.408728 - 2012-12-27) [Support]
com.parallels.kext.prl_vnic [no charge] (4.0 3844.408728 - 2012-12-27) [Support]
/ Library/Application Support/Avast/components/fileshield/not signed
[loading] com.avast.AvastFileShield (3.0.0 - SDK 10.10 - 2016-07-21) [Support]
/ Library/Application Support/Avast/components/proxy/not signed
[loading] com.avast.PacketForwarder (2.1 - SDK 10.10 - 2016-07-21) [Support]
/ Library/Extensions
[loading] com.squirrels.driver.AirParrotSpeakers (1.8 - SDK 10.8 - 2016-07-26) [Support]
[loading] net.telestream.driver.TelestreamAudio (1.1.1 - SDK 10.8 - 2016-07-26) [Support]
/ System/Library/Extensions
[no charge] com.beceem.BeceemAppleWiMAXAdapter (5.2.56d16 - 2016-07-26) [Support]
com.devguru.driver.DIFMCDFree [no charge] (1.1.0 - 2016-07-26) [Support]
com.devguru.driver.DIFMSerial [no charge] (1.1.0 - 2016-07-26) [Support]
com.fklt.driver [no charge] (1.8.0 - 2016-07-26) [Support]
[no charge] com.novatelwireless.driver.3G (v2.2.8 (3)-2016-07-26) [Support]
com.novatelwireless.driver.DisableAutoInstall [no charge] (1.2 - 2016-07-26) [Support]
[no charge] com.sierrawireless.driver.SierraDevSupport (2.0.6.0 - 2016-07-26) [Support]
[no charge] com.sierrawireless.driver.SierraFSCSupport (2.0.6.0 - 2016-07-26) [Support]
/System/Library/Extensions/NovatelWireless3G.kext/contents/plugins
[no charge] com.novatelwireless.driver.3GData (v2.2.8 (3)-2011-11-05) [Support]
ParallelsDesktopTransporter: Path: / Library/StartupItems/ParallelsDesktopTransporter
Startup items are obsolete in OS X Yosemite
[operation] com.apple.Finder.plist (2016-02-19) -invalid signature!
[loading] com.apple.FollowUpUI.plist (2016-02-11) -invalid signature!
[loading] com.apple.ScreenReaderUIServer.plist (2016-02-16) -invalid signature!
[loading] com.apple.powerchime.plist (2016-02-22) -invalid signature!
[loading] com.apple.quicklook.32bit.plist (2016-02-04) -invalid signature!
[operation] com.apple.quicklook.plist (2016-02-04) -invalid signature!
[loading] com.apple.quicklook.ui.helper.plist (2016-02-04) -invalid signature!
[loaded] 9 tasks Apple
[loading] 149 tasks Apple
[operation] 64 tasks Apple
[killed] 16 tasks Apple
16 killed processes lack of RAM
[loaded] 45 tasks Apple
[loading] 153 tasks Apple
[operation] 78 tasks Apple
[killed] 14 tasks Apple
14 killed process lack of RAM
[no charge] com.adobe.AAM.Updater - 1.0.plist (2016-06-14) [Support]
[failure] com.adobe.ARMDCHelper.cc24aef4a1b90ed56a... plist (2016-07-13) [Support]
[failure] com.adobe.AdobeCreativeCloud.plist (2016-04-27) [Support]
[loading] com.adobe.CS5ServiceManager.plist (2010-06-17) [Support]
[operation] com.avast.secureline.update - agent.plist (2016-06-29) [Support]
[loading] com.avast.secureline.userinit.plist (2016-06-29) [Support]
[operation] com.avast.update - agent.plist (2016-07-22) [Support]
[loading] com.avast.userinit.plist (2016-07-22) [Support]
[operation] com.brother.LOGINserver.plist (2013-10-06) [Support]
[no charge] com.oracle.java.Java - Updater.plist [Support]
com.TeamViewer.TeamViewer.plist [no charge] (2016-02-14) [Support]
com.TeamViewer.teamviewer_desktop.plist [no charge] (2016-02-14) [Support]
[loading] com.adobe.ARMDC.Communicator.plist (2016-07-13) [Support]
[loading] com.adobe.ARMDC.SMJobBlessHelper.plist (2016-07-13) [Support]
[loading] com.adobe.SwitchBoard.plist (2011-12-14) [Support]
[loading] com.adobe.agsservice.plist (2015-11-02) [Support]
[failure] com.adobe.fpsaud.plist (2016-05-09) [Support]
com.adobe.versioncueCS3.plist [loading] (2008-06-22) [Support]
[loading] com.avast.init.plist (2016-07-22) [Support]
[loading] com.avast.secureline.init.plist (2016-06-29) [Support]
[loading] com.avast.secureline.uninstall.plist (2016-06-29) [Support]
[loading] com.avast.secureline.update.plist (2016-06-29) [Support]
[loading] com.avast.uninstall.plist (2016-07-22) [Support]
[loading] com.avast.update.plist (2016-07-22) [Support]
[loading] com.microsoft.office.licensing.helper.plist (2011-03-10) [Support]
[loading] com.oracle.JavaInstallHelper.plist (2016-04-21) [Support]
[no charge] com.oracle.java.Helper - Tool.plist [Support]
[loading] com.roamingclient.cell.mac.roamingclient.plist (2011-11-05) [Support]
[loading] com.rogueamoeba.instanton - agent.plist (2016-06-23) [Support]
[operation] com.sierrawireless.SWoCMon.plist (2010-05-20) [Support]
com.sierrawireless.SierraReset.plist [no charge] (2010-05-20) [Support]
[loading] com.teamviewer.Helper.plist (2015-09-29) [Support]
com.TeamViewer.teamviewer_service.plist [no charge] (2016-02-14) [Support]
[loading] com.adobe.AAM.Updater - 1.0.plist (2010-06-28) [Support]
[failure] com.adobe.ARM. [...]. plist (2010-06-22) [Support]
[failure] com.adobe.ARM. [...]. plist (2009-10-26) [Support]
[failure] com.adobe.ARM. [...]. plist (2011-12-15) [Support]
[operation] com.amazon.music.plist (2014-10-18) [Support]
[failure] com.apple.MobileMeSyncClientAgent.plist (2011-06-14) -/System/Library/PrivateFrameworks/DotMacSyncManager.framework/Resources/mobilem esyncclient: Executable not found!
[failure] com.apple.SafariBookmarksSyncer.plist (2009-09-14) -/Applications/Safari.app/Contents/SafariSyncClient.app/Contents/MacOS/SafariSyn customer: Executable not found!
[loading] com.avast.home.userinit.plist (2016-07-22) [Support]
[loading] com.avast.secureline.home.userinit.plist (2016-06-29) [Support]
[loading] com.google.keystone.agent.plist (2016-07-11) [Support]
[operation] com.spotify.webhelper.plist (2015-05-30) [Support]
info.lokiware.attachmenttamer.cleanup.plist [no charge] (2013-01-07) [Support]
[failure] info.lokiware.attachmenttamer.setupagent.plist (06-01-2013) [Support]
iTunesHelper Application (/ Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Dropbox application (/ Applications/Dropbox.app)
Application of Google Reader (Google Drive.app/Applications /)
Hidden AdobeResourceSynchronizer Application (/ Applications/Adobe Acrobat DC/Adobe Acrobat.app/Contents/Helpers/AdobeResourceSynchronizer.app)
Garmin Express Service application (/ Applications/Garmin Express.app/Contents/Library/LoginItems/Garmin Express Service.app)
Request for EvernoteHelper (/ Applications/Evernote.app/Contents/Library/LoginItems/EvernoteHelper.app)
[ongoing] com.adobe.CCLibrary.166112
com.apple.BKAgentService [killed]
com.apple.MailServiceAgent [loading]
com.Apple.mail.80352 [loading]
com.avast.account [loading]
[ongoing] com.avast.daemon
[ongoing] com.avast.FileShield
[ongoing] com.avast.helper
[ongoing] com.avast.proxy
com.avast.secureline.Burger [loading]
[ongoing] com.avast.secureline.service
[ongoing] com.avast.service
[ongoing] com.brother.utility.NETserver.157792
[ongoing] com.brother.utility.USBserver.137312
[ongoing] com.evernote.EvernoteHelper.66912
[ongoing] com.Garmin.Renu.service.3552
[ongoing] com.getdropbox.dropbox.134752
[loading] 421 tasks Apple
[operation] 184 tasks Apple
[killed] 33 tasks Apple
DirectorShockwave: 11.6.6r636 (2012-08-09) [Support]
Unity Web Player: UnityPlayer version 4.1.3f3 (2013-05-30) [Support]
Default browser: 601 - SDK 10.11 (2016-07-26)
Flip4Mac WMV Plugin: 2.3.8.1 (2011-01-13) [Support]
AdobeAAMDetect: 3.0.0.0 - SDK 10.9 (2016-04-27) [Support]
FlashPlayer - 10.6: 21.0.0.242 - SDK 10.6 (2016-05-13) [Support]
AdobePDFViewerNPAPI: 15.017.20050 - SDK 10.11 (2016-07-13) [Support]
Silverlight: 5.1.50428.0 - SDK 10.6 (2016-07-10) [Support]
QuickTime Plugin: 7.7.3 (2016-07-26)
Flash Player: 21.0.0.242 - SDK 10.6 (2016-05-13) obsolete! Update
iPhotoPhotocast: 7.0 - 10.8 SDK (2013-04-30)
NP_2020Player_IKEA: 5.0.93.0 - SDK 10.6 (2011-10-03) [Support]
AdobePDFViewer: 15.017.20050 - SDK 10.11 (2016-07-13) [Support]
GarminGpsControl: 4.0.2.6 Beta - SDK 10.6 (2012-09-11) [Support]
SharePointBrowserPlugin: 14.6.6 - SDK 10.6 (2016-07-25) [Support]
JavaAppletPlugin: 15.0.1 - 10.7 (2016-05-04) check the version of the SDK
WebEx: 1.0 (2010-04-06) [Support]
AdBlock - BetaFish, Inc. - https://getadblock.com (2016-07-30)
DuckDuckGo - DuckDuckGo - http://duckduckgo.com (2015-07-11)
Save on Pocket - Read It Later, Inc. - http://getpocket.com/ (2015-11-07)
Adobe Version Cue CS3 (2008-06-22) [Support]
Flash Player (2016-05-09) [Support]
Flip4Mac WMV (2011-01-13) [Support]
Growl (2013-12-20) [Support]
MacFUSE (2008-12-19) [Support]
Skip system files: No.
Automatic backup: YES
Volumes to back up:
ShiftySeven II: Disc size: 499,25 GB disc used: 442,50 GB
Destinations:
Toshiba Time Machine [Local]
Total size: 999,86 GB
Total number of backups: 40
An older backup: 23/04/15, 16:45
Last backup: 25/07/16, 20:34
Backup disk size: too small
Backup size GB 999,86 < (disc 442,50 GB X 3)
11% NotificationCenter
iTunes 11%
5% WindowServer
5% coreaudiod
3% kernel_task
Top of page process of memory: ⓘ
919 MB kernel_task
688 MB com.apple.WebKit.WebContent (4)
Mdworker (13) 238 MB
Safari of 205 MB
Mds_stores 156 MB
131 MB free RAM
8.12 used GB RAM (4.05 GB being cached)
176 MB used Swap
July 30, 2016, 18:49:37 ~/Library/Logs/DiagnosticReports/Install_2016-07-30-184937_[redacted].crash
com.adobe.Install - Applications/Utilities/Adobe Creative Cloud / * / Creative Installer.app/Contents/MacOS/Install Cloud
July 27, 2016, 16:21:32 /Library/Logs/DiagnosticReports/Kernel_2016-07-27-162132_[redacted].panic [details]
July 27, 2016, 16:18:59 /Library/Logs/DiagnosticReports/Kernel_2016-07-27-161859_[redacted].panic [details]
Uninstall Avast. It's a worthless scam that don't do anything useful. The only thing it does is a lot more then what it claims, that he you will protect from.
Maybe you are looking for
-
Mobile project for external hard drive is not free HD space
Was working on a major project and got a caveat that my internal HD was almost full. FCPX get very laggy. So I moved several large projects HD internal HD of the iMac to my external movie player, following all the instructions on how to do it. Everyt
-
my computer screen will be not stable on any screen that must be read. It selects all the options under a heading and flashes by each of them. Is jumping around so much, now that I have bad typing. Have you tried the ideas without result in case of
-
I have IE to Mozilla Firefox password and can not find that my internet registered the username and passwords. Help, please!
-
Aspire SSD V5 - 591 G-53HV upgrade
Hello I recently put a V5 - 591 g-53hv Aspire series model. However, it does not come with a SSD drive pre-installed, although as I know, it contains a port M.2 SSD. I need following information to be confirmed before you buy a SSD- -What is the spec
-
Try to save valuable disk space for adding applications for classroom assignments
It takes to all Service packs installed on my system?