Uninstall SP3

Similar Questions

• Is it safe to uninstall SP3 in Microsoft Windows XP, 64 version after several months of course of installation.

  I just discovered that SP3 is not for Windows XP with 64 processor. I forgot to update but I must have installed it because my information system confirms that it came with SP2. The question is, is - this course uninstall after this long period especially since I added other programs since.

  Coinsidently, I discovered this problem during my research of fault error that does not allowmy system to perform updates micorsoft. Your contribution is appreciated. THX

  Service packs help keep Windows up to date, and they can extend and update the functionality of your computer

  Service packs can contain updates for system reliability, program compatibility, security, etc.

  You can uninstall Windows XP SP3 as a troubleshooting step if you encounter problems after installing the service pack. As you have installed SP3, months ago, it may not be the cause of the problem that you are facing. However if you want to uninstall SP3 visit the link below

  http://support.Microsoft.com/kb/950249

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Tried to uninstall SP3 of xp, but it does not let me remove.

  Cannot remove XP SP3 from Add or remove programs, because it is not a sign of delete listed.

  If your computer came with XP sp3 already installed, or if you did a clean installation with a CD of XP sp3, you cannot uninstall it because there is nothing to return to.

  Why do you think that you must uninstall sp3?

• How to uninstall sp3 after MSFT support article id 950249 fails

  I need to remove the sp3 of windows xp pro because of troubleshooting multi material problems post install of SP3. I tried to follow the methods referred to in article id microsoft knowledge base: 950249. The 4 methods described, I could try only 2 of them.  The other 2 would not apply because that;  #1-remove via ' Add or Remove Programs ", the line in the list" Windows XP Service Pack 3 "missing the button remove and #3 - use the system restore" SP3 installed date is missing. The 2 other methods seem to work by following the steps described in each. However, when starting in windows after you run one of these methods, SP3 is still installed & was not delete.  Is there another way either manually, or automatically which can be eventually used?

  If you are unable to remove using method 2 or 4, you're pretty much up the Creek with it, there is no other hair removal methods.

  John

• Tecra S10 - 11W: how to uninstall Win XP SP3

  I have successfully completed my Tecra S10 - 11W from Vista to XP with the recovery CD
  But since XP SP3 (had) problems with some software I want to uninstall it and install SP2.
  But even with the information from the Microsoft Web site, I was unable to uninstall SP3!

  Hello

  I put t know if it would be possible to remove the SP3 if it was not previously installed.
  But I found that MS document:

  + How to remove Windows XP Service Pack 3 from your computer.
  http://support.Microsoft.com/kb/950249

  Perhaps, it might be useful.

• Impossible to apply the update of security MS15-058 on sql server 2008 R2 SP3

  Hi team,

  Here's my situation: and ask for your help as soon as possible

  ServerName MajorVersion MinorVersion version complete edition
  XXXXX 2008 SP3 Enterprise Edition (64-bit) 10.50.6000.34

  I'm not able to install the update of MS15-058 security on my server and it throws me error below.

  SSMS, it's showing as 10.50.6000, but isn't actually to SP2 (10.50.4000) only of SP3.

  Please tell me the resolution.

  The version of SQL Server's MSSQLSERVER instance does not match the version expected by the update to SQL Server. The installed version of the SQL Server product is 10.52.4000.0, and the expected SQL Server version is 10.53.6000.34. *.

  Only shared feautures are getting updated to MS15-058, which is 10.50.6220.34.

  But the SQL Server database engine and other services are not getting updates and please help us its been 3 days we suffer with him.

  We tried to uninstall SP3, SP2 later none is uninstall properly and seems to service pack SP3 to SQL server 2008R2 in our machine is broken. Kindly help us resolution as soon as possible.

  SLP: VstaRedistWithLangPack_Cpu32_1049 Package ID: NotInstalled
  2015-11-06 05:59:24 Slp: VstaRedistWithLangPack_Cpu32_2052 Package ID: NotInstalled
  2015-11-06 05:59:24 Slp: VstaRedistWithLangPack_Cpu32_3082 Package ID: NotInstalled
  2015-11-06 05:59:24 Slp: VstaRedistWithLangPack_Cpu32_1053 Package ID: NotInstalled
  2015-11-06 05:59:24 Slp: VS_Shell_Cpu32 ID of Package: installation - Version: 9.0.30729
  2015-11-06 05:59:24 Slp: msreportviewer90sp1_Cpu32 ID of Package: installation - Version: 9.0.30731
  2015-11-06 05:59:24 Slp: msreportviewer90sp1_langpack_Cpu32_1028 ID of Package: NotInstalled
  2015-11-06 05:59:24 Slp: msreportviewer90sp1_langpack_Cpu32_1031 ID of Package: NotInstalled
  2015-11-06 05:59:24 Slp: msreportviewer90sp1_langpack_Cpu32_1033 ID of Package: NotInstalled
  2015-11-06 05:59:24 Slp: msreportviewer90sp1_langpack_Cpu32_1036 ID of Package: NotInstalled
  2015-11-06 05:59:24 Slp: msreportviewer90sp1_langpack_Cpu32_1040 ID of Package: NotInstalled
  2015-11-06 05:59:24 Slp: msreportviewer90sp1_langpack_Cpu32_1041 ID of Package: NotInstalled
  2015-11-06 05:59:24 Slp: msreportviewer90sp1_langpack_Cpu32_1042 ID of Package: NotInstalled
  2015-11-06 05:59:24 Slp: msreportviewer90sp1_langpack_Cpu32_1046 ID of Package: NotInstalled
  2015-11-06 05:59:24 Slp: msreportviewer90sp1_langpack_Cpu32_1049 ID of Package: NotInstalled
  2015-11-06 05:59:24 Slp: msreportviewer90sp1_langpack_Cpu32_2052 ID of Package: NotInstalled
  2015-11-06 05:59:24 Slp: msreportviewer90sp1_langpack_Cpu32_3082 ID of Package: NotInstalled
  2015-11-06 05:59:24 Slp: msreportviewer90sp1_langpack_Cpu32_1053 ID of Package: NotInstalled
  2015-11-06 05:59:24 Slp: sql_engine_core_inst_loc_ctp6_Cpu64_1028 ID of Package: NotInstalled
  2015-11-06 05:59:24 Slp: sql_engine_core_inst_loc_ctp6_Cpu64_1031 ID of Package: NotInstalled
  2015-11-06 05:59:24 Slp: sql_engine_core_inst_loc_ctp6_Cpu64_1033 ID of Package: NotInstalled
  2015-11-06 05:59:24 Slp: sql_engine_core_inst_loc_ctp6_Cpu64_1036 ID of Package: NotInstalled
  2015-11-06 05:59:24 Slp: sql_engine_core_inst_loc_ctp6_Cpu64_1040 ID of Package: NotInstalled
  2015-11-06 05:59:24 Slp: sql_engine_core_inst_loc_ctp6_Cpu64_1041 ID of Package: NotInstalled
  2015-11-06 05:59:24 Slp: sql_engine_core_inst_loc_ctp6_Cpu64_1042 ID of Package: NotInstalled
  2015-11-06 05:59:24 Slp: sql_engine_core_inst_loc_ctp6_Cpu64_1046 ID of Package: NotInstalled
  2015-11-06 05:59:24 Slp: sql_engine_core_inst_loc_ctp6_Cpu64_1049 ID of Package: NotInstalled
  2015-11-06 05:59:24 Slp: sql_engine_core_inst_loc_ctp6_Cpu64_2052 ID of Package: NotInstalled
  2015-11-06 05:59:24 Slp: sql_engine_core_inst_loc_ctp6_Cpu64_3082 ID of Package: NotInstalled
  2015-11-06 05:59:24 Slp: sql_engine_core_inst_loc_ctp6_Cpu64_1053 ID of Package: NotInstalled
  2015-11-06 05:59:24 Slp: sql_fulltext_ctp6_Cpu64 ID of Package: NotInstalled
  2015-11-06 05:59:24 Slp: sql_engine_core_inst_ctp6_Cpu64 ID of Package: NotInstalled
  2015-11-06 05:59:24 Slp: sql_engine_core_inst_ctp6_AnyInstance_Cpu64 ID of Package: MSI: Package version data are "" Version Installed: MinVersion 10.52.4000.0: 10.0.1400 MaxVersion: 10.50.1599.1 ""
  2015-11-06 05:59:24 Slp: sql_engine_core_inst_ctp6_AnyInstance_Cpu64 ID of Package: match result for MSI - Version: false, Cpu: True, language: true
  2015-11-06 05:59:24 Slp: sql_engine_core_inst_ctp6_AnyInstance_Cpu64 ID of Package: NotInstalled
  2015-11-06 05:59:24 Slp: sql_as_loc_ctp6_Cpu64_1028 ID of Package: NotInstalled
  2015-11-06 05:59:24 Slp: sql_as_loc_ctp6_Cpu64_1031 ID of Package: NotInstalled
  2015-11-06 05:59:24 Slp: sql_as_loc_ctp6_Cpu64_1033 ID of Package: NotInstalled
  2015-11-06 05:59:24 Slp: sql_as_loc_ctp6_Cpu64_1036 ID of Package: NotInstalled
  2015-11-06 05:59:24 Slp: sql_as_loc_ctp6_Cpu64_1040 ID of Package: NotInstalled
  2015-11-06 05:59:24 Slp: sql_as_loc_ctp6_Cpu64_1041 ID of Package: NotInstalled
  2015-11-06 05:59:24 Slp: sql_as_loc_ctp6_Cpu64_1042 ID of Package: NotInstalled
  2015-11-06 05:59:24 Slp: sql_as_loc_ctp6_Cpu64_1046 ID of Package: NotInstalled
  2015-11-06 05:59:24 Slp: sql_as_loc_ctp6_Cpu64_1049 ID of Package: NotInstalled
  2015-11-06 05:59:24 Slp: sql_as_loc_ctp6_Cpu64_2052 ID of Package: NotInstalled
  2015-11-06 05:59:24 Slp: sql_as_loc_ctp6_Cpu64_3082 ID of Package: NotInstalled

  Thank you

  Vijay

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  Or in SQL Server TechNet Forums.

  https://social.technet.Microsoft.com/forums/SQLServer/en-us/home?category=SQLServer

  See you soon.

• Stay programs XP SP2 after installation of XP SP3

  I am running XP SP3 and have the following programs from XP SP2 remains: .NET Framework 3.5 SP1, 2.0 & 3.0 SP2 as well as MSXML 4.0 KB927978 936181, 954430 & 973688. I can remove these programs from my install programs without harmful effect?

  They are not programs, they are the runtimes (MS .NET Frameworks), a parser (MSXML 4) and updates of security (KBs927978, 936181, 954430 & 973688) for the XML parser.

  If you want to uninstall what you have listed the question is, when they were installed?
  If they have been installed before Service Pack 2 has been applied, then you can now uninstall .

  If they were installed after SP2 has been applied, then you can uninstall SP3 with all required reboots, uninstall the lot of them, restarting, reapply SP3 with all the required reboot.
  Please note that MSXML 4 SP2 will be no longer supported after April 2011. You will need to install MSXML 4 SP3-
  MSXML 4.0 Service Pack 3 (Microsoft XML Core Services)

  Expert MowGreen Windows IT Pro - consumer safety

• XP sp3 slows down computer

  I had been avoiding XP sp3 update because of potential problems that were noted on various sites including this one. However, for the updates important it is now a necessity. XP pro sp2 played perfectly, and I followed the installation instructions precisely (#950717 KB). The installation went without any apparent problems. However, after the install boot ups have become important slower by several fold and Internet startup, programs, etc. have also slowed. I tried to uninstall that once again boot up almost normal and then reinstalled sp3 with the same result. I have been the internet looking for an explanation for the downturn and a fix to anything will do. I have 2 computers with xp pro because management software I need (medical) work not with vista or 7. It therefore seems to me that since I continue to use xp and to get updates, there should be a solution to this problem.

  [1] I even found a post by you in 2008 or 2009 would recommend to uninstall SP3 because of the problem of slowing.

  [2] I precisely followed the instructions in KB #950717 for download, then install.

  A1. NEVER take recommendations or advice given to someone else as applicable to your situation, even if it seems to be the same. Each computer is different.

  A2. If you have read other messages from my friends on the installation of SP3, you should have seen this reference, too:

  WinXP SP3 - read all the prerequisites for a successful installation
  http://msmvps.com/blogs/harrywaldron/archive/2008/05/08/Windows-XP-SP3-read-all-prerequisites-for-a-successful-installation.aspx

  If you wish, you can try to uninstall/reinstall SP3 by the foregoing. If not, see my previous response.

  See also...

  How do advanced clean boot troubleshooting in Windows XP
  http://support.Microsoft.com/kb/316434

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Post updated to SP3 and IE 8, some systems cannot connect to the local network

  A number of machines on my LAN that have recently been fixed to the last State (installed XP SP3, IE 8 and all dry and updated crit) seemed to lose all capacity for networking.

  Device Manager displays all problems, systems were released in market, on a a system restore was performed at a week back but the problem persists. They will not collect a DHCP, our work with a fixed IP address.

  They can only be connected with the local administrator account - domain accounts will not work

  The event log is giving nothing away - very curious!

  I'll try to include measures:

  1 netsh winsock reset (reboot)

  2 netsh int ip reset c:\resetlog.txt (reboot) http://support.microsoft.com/kb/299357/

  3 Uninstall SP3

  I would avoid if possible reconstruction so I welcme possible any other suggestions as to the cause or corrections

  Turned out to be a problem with the site switch - switch reboot solved the problem

• SP3 update

  I install sp3 update to windows xp pro and now windows won't start and it's for me a blue window with three one or four error codes.   I can uninstall sp3 update and that will solve my problem?    the error codes are 0x0000008e 0xc0000005, 0x804ecba8, 0xf570a780 and 0x00000000.   Thank you

  How to remove Windows XP Service Pack 3 from your computer
  http://support.Microsoft.com/kb/950249

  How to troubleshoot an installation fails on Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950718

  1. How to obtain the latest Windows XP service pack
     http://support.Microsoft.com/kb/322389

  2. Release notes for Windows XP Service Pack 3
     http://support.Microsoft.com/kb/936929

  3. The space of hard disk required for Windows XP Service Pack 3
     http://support.Microsoft.com/kb/947311

  4. Steps to take before you install Windows XP Service Pack 3 
     http://support.Microsoft.com/kb/950717

  5. List of fixes included in Windows XP Service Pack 3
     http://support.Microsoft.com/kb/946480

  6. Some third-party programs can make a change in functionality after you install Windows XP Service Pack 3
     http://support.Microsoft.com/kb/947309

  TaurArian [MVP] 2005-2010 - Update Services

• I have Windows XP home edition, error: process id = oxle98 (7832) Threadid = 0xlab8 (6840), when updates download sp3 it is impossible to install... because it is already installed according to 'Add/Remove Programs ".

  I'm having a problem with windows XP Edition family and service pack 3. In "Add/Remove Programs", it lists ServicePack 3 as it is installed, but when I download updates, it's always there needing to be installed... when I try to turn off my computer it always tries to install which in fact clinging and unable to turn off if I have to disconnect the whole shebang. I tried looking through the help and tried to look at things, he suggests to delete first, but I do not have these bugs, programs, issues. I want to fix this if possible. The error message is: Processid = 0xle98 (7832), Thread = 0xlab8 (6840)

  Hello

  Welcome to Microsoft Windows 7 answers Forum!

  You can try the steps below and check if the problem is resolved.

   

  This problem can occur if the service pack is not installed correctly, so uninstall us the Service Pack 3 (SP3) to your computer and try to download the standalone package and try to install and control the issuance

  To uninstall SP3, you can follow the link provided below.

  How to remove Windows XP Service Pack 3 from your computer

  http://support.Microsoft.com/kb/950249

  Now, you can follow the below a level provided to download the SP3 on your computer.

  How to obtain the latest Windows XP service pack

  http://support.Microsoft.com/kb/322389

  Hope this information is useful.

  Thank you, and in what concerns:

  Suresh Kumar-Microsoft Support.

  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• try to uninstall Internet explorer8

  My brother try to 8 to uninstall and reinstall 7, it almost goes through then he gets an error message that says:
  Setup cannot copy the file hmmapi.dll.mul
  Check that the specified location is correct or change it and insert Windodws NT Service Pk uninstall directory in drive specific C:\Windows\ie8

  Can someone tell me how to help him down 8 so that he can put 7 return on

  http://support.Microsoft.com/kb/957700
  How to uninstall or remove Internet Explorer 8?

  When you remove Internet Explorer 8, your previous version of Internet Explorer is restored with your customizations (such as add-ins, Favorites and your home page). (http://support.microsoft.com/?scid=letmefixit)

  Important You cannot uninstall Internet Explorer 8 if it is set as not removable. This occurs if you install Internet Explorer 8 before you install Service Pack 3 (SP3) for Windows XP. If this scenario applies to you, then you must uninstall SP3 before you uninstall Internet Explorer 8. For more information about this issue, click on the number below to view the article in the Microsoft Knowledge Base:

  950719 (http://support.microsoft.com/kb/950719/) you cannot uninstall Internet Explorer 7 or Internet Explorer 8 after installation of Windows XP Service Pack 3

  TaurArian [MVP] 2005-2010 - Update Services

• SP3 and IE8 update problems

  Hi, hope someone can help me.  I run a Pentium 4 with Windows XP Media Center Edition machine.  I did the update to IE8 and then install SP3 thing that other people have had problems with.  I had bad too, so I uninstalled IE8 but I got in trouble, others have had with it.  To cut a long story short, I managed to go back to IE7 and recovered my settings for this.  I uninstalled SP3 and got my machine about how it was.  Now I want to install SP3 but Windows update will not propose it me as he seems to think that I have already installed.  The thing is, I want to run this computer in my home LAN, and my son computer Vista can't see my XP machine.  I want to install the LLD file but when I download this fix it install as it says I already have a newer version on my machine, which I don't have!  So it seems to me that I have to get rid of the registry entry, or anything which indicates all of the Microsoft network that I always have these things that I once installed, but no longer have.  If someone knows a way to do it, I would be very grateful for your advice. Best regards, Steve

  http://www.Microsoft.com/windowsxp/expertzone/newsgroups/reader.mspx?DG=Microsoft.public.WindowsXP.General

  Above is a link to the XP Newsgroups.

  You will need to post here for questions specific to XP.

  Here is the Vista Forums.

  See you soon. Mick Murphy - Microsoft partner

• Do not have Windows Movie Maker on Windwos XP SP3 computer.

  Original title: Windows Movie Maker

  For XP, my SP #3 does NOT include the Windows Movie Maker. How can I get it? Can I Uninstall SP3, if so, how?

  Hello

  Check if Movie Maker is already there in your computer.

  a. click on start.

  b. go in run.

  c. type moviemk.exe and press ENTER.

  See also:

  Windows Movie Maker 2.1 is installed on your computer when you install Windows XP Service Pack 2 or Microsoft Windows XP Tablet PC Edition 2005

  http://support.Microsoft.com/kb/883603

  Windows Movie Maker: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Movie-Maker/FAQ

• How to fix XP SP3

  Windows complains a lack or files obsolete in SP3 and asking the SP3 CD to be inserted to repair. There is no CD SP3. SP3 has been installed from a direct download from Ms. He is sitting in the Add/Remove Programs directory but do not offer a repair or reinstall option. How to imitate a SP3 CD to repair, what he wants to do? It is not specific about what files are outdated or have been replaced by another program or what kind of program could have replaced the files, he complains.

  I can move the windows complaining and nothing seems affected but he will repeat the complaint.

  Any ideas?

  Thank you.

  CB

  Have you tried to uninstall sp3 and then reinstall it, or just install it over the current installation?

  Service Pack 3 download