Stay programs XP SP2 after installation of XP SP3

Similar Questions

• How to log on to windows xp sp2 after installation of critical security?

  Dear Sir
  I have installed vital security last week. When I installed it, it is said that to restart or shut down my system so that I restarted. But when my system restarts, I can not connect on my windows with my administrator password. my windows is not a counterfeit copy so please help me how to open a windows session.

  Thank you very much
  kyawkyar

  Hi Jocelyn,

  Thanks for the response on the site of Microsoft Windows Vista Community. Microsoft technical support engineers cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features.
  For more information about the lost passwords, please see the following Knowledge Base Article:
  http://support.Microsoft.com/kb/189126

  By that, if you do not know your password and cannot log on to a relocation will be required.

  Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• No WiFi after installation of XP SP3 on Portege M100

  I have a used protégé M100, on which I recently did a clean install of Windows XP Pro (SP3).
  Unfortunately, as a novice, I didn't save my drivers.

  I've been on the Toshiba site and that you have downloaded everything for this model (M100 protégé Centrino), I printed the "content and the order of installation for windows XP" and load all the drivers at best in the suggested order.

  However, some items were not available to download, or I did not understand the references.

  I downloaded and installed the Atheros client utility and the customer, as well as Configfree utility aironet Cisco, but could find nothing to match the description "wireless driver".

  Perhaps because of this, or not? customer utilities above and ConfigFree (connection doctor) as well as some other diagnostic software downloads tell me I have no installed... wireless LAN hardware but I know it's there, and I never got it out!

  Can someone tell me what I can do?

  Hi George

  I think that you just have not installed the right driver WLan.

  The Portege M100 was certainly equipped with a wireless network card internal minPCI and you should see it in the device under network card Manager. It should appear as an unknown device (if no driver has been installed) or a Wlan-Intel/Atheros/Toshiba/Cisco card.

  Always it is that there are different models of the Portege M100 with different internal minPCI WLan cards and I think you used the incompatible driver.

  Please check the single WLan drivers published on the page of the Toshiba driver and check if you allow your internal wireless network card.

  In addition, you can use the Toshiba WLan portal to get the latest drivers for the Atheros/Intel cards.

  Check this box:
  http://APS.toshiba-tro.de/WLAN/

  Good bye

• Computer keeps restarting, after installation of the SP3 for Windows XP.

  After you install sp3 for windows XP my computer keeps restarting. I have difficulties to find the patch that corrects this can someone help?

  Original title: sp3 problem with AMD processors

  Well, with this description, you might want to look at this:

  http://support.Microsoft.com/kb/953356

• After installation of XP SP3 error, "cannot locate the Microsoft FoxPro support library".

  I've recently updated to service pack 3. When I try to open a program I use, it says "Cannot locate the Microsoft FoxPro support library". The program is run when I had service pack 2. Am I missing something with service pack 3?

  Hello

  Post your query in Visual FoxPro forums to improve the assistance:

  http://social.msdn.Microsoft.com/forums/en-us/visualfoxprogeneral/threads

  You can check the link where another customer a similar question below:

  http://social.msdn.Microsoft.com/forums/en-us/visualfoxprogeneral/thread/57918732-e804-456a-B506-6eaf0dc75bd5/

• Log on problem after installation of the sp3

  Hi there forgive me if this is old news, but I just bought an old laptop for children. The seller has installed xp pro top with IE 8.

  I installed the latest java, W. Media Player. I had a browse through updates and he said that auto updates can not be read if my system is up to date. So I thought that I should install SP3. Once this is done I did the reboot and start-up of the machine re I got the newspaper of the administrator on request of password. When I bought this machine and it works, he never requested a password and went directly to the screen, probably because it was only a single account. the seller told me that he had installed a hard drive cool and a new copy of XP pro. There is a sticker on the back of the machine activation key.

  I tried many combinations of passwords, including the sellers name, leave blank and just pressing ENTER. tried Ctrl alt del all resulted in nothing.

  I contacted the seller and he said that he never put a password and therefore cannot (or will not help) I looked on the web for some ideas, including starting in safe mode, but the info it says it will ask for a password, but I am. I am now locked out of my machine. Help, please. Thank you

  On Monday, April 7, 2014 21:12:58 + 0000, DeanChaytor wrote:

  On Monday, April 7, 2014 20:29:13 + 0000, DeanChaytor wrote:

  Hi there forgive me if this is old news, but I just bought an old laptop for children. The seller has installed xp pro top with IE 8.

  If I bought a used computer, no matter who previously owned the
  first thing I could do with it would be to reinstall the operating
  system itself. You don't know how the computer has been maintained,
  which has been improperly installed, what's missing, what virus and
  There may be spyware, etc. I would not live with someone
  other errors and problems, possibility of kiddy p0rn, etc. and I
  would not recommend anyone else to do.

  Your choice of course, but in my opinion, you're playing with fire if you
  do not reinstall Windows properly.

  Thanks for the reply.

  You are welcome. Happy to help you.

  To do a clean install, what I have to buy a new version or I can just a xp pro disc and reuse the key at the back of the machine, provided that they are ok.

  If you have a product key on a sticker, it's an OEM version. You can
  use the disc to a friend, if the sound is also OEM. Try to find a friend with the
  same brand of computer.

• Can I remove SP2 after installing SP3?

  Can I remove SP2 after installation of SP3 to free disk space?

  XP SP3: Post Installation cleaning http://aumha.net/viewtopic.php?f=62&t=33827

• We are trying to install FSRM (File Server Resource Manager) in windows server 2 k 3 R2 SP2. After installation, its error message that gives as no network device connected. Suggest me!

  Original title: problem in installing FSRM

  We are trying to install FSRM (File Server Resource Manager) in windows server 2 k 3 R2 SP2. After installation, open the FSRM in "All programs", its error message that gives as no network device connected.  Suggest me!

  Hello

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows 7 networking forum.

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

• Vista SP2 update causing CompactFlash new hardware detection repeated even after installation of the driver

  I have a footstool of m8100n HP Pavilion Windows Vista Home Premium.  Since the Vista SP2 which was installed yesterday through the update of Windows, my PC guard detection of new hardware when I registered.  The application popup never ask again once, ask later, or update/search recommended for software to install what is recommended.  After selecting the option recommended and install the software that it finds, I get a popup about CompactFlash is now detected and ready to use material.  After this exercise, looks all right.  However, every time I connect as administrator or standard user on my Windows Vista computer passes through the detection of the same material and the update.  He should not have to repeat this after installation and update of itself for the new hardware.  What is the cause and Microsoft is aware of this problem?

  I worked with HP on the problem.  It wasn't a problem of driver from the manufacturer because it had no software update HP.  The integrated CompactFlash drive location doesn't have a drive letter assigned.  Do not understand why that would be a problem because on the removable media drive letters are assigned dynamically when you insert a card or a player.  Records didn't have drive letters when running on SP1 and it wasn't and issues then.  This seems to have become a requirement for SP2.

  The fix was to go in Windows disk management and pre assign drive letters to the disks 1 to 4 that are for CompactFlash removable media, MS/MS-Pro, SD/MMC and SM/xD-Picture on my HP m8100n PC.  Once this has been done and that Windows detects new hardware because of the SP2 update drivers, it installs successfully and is no longer repeat the detection/installation process.

• I need help for Windows Media Player to start after installation. I click on the icon and nothing happens. I have try the exe file in the program folder and still nothing.

  I can't get Windows MEdia Player to start once I install it. My PC crashed and I reinstalled XP Pro. and did all the updates that were needed. Then I installed Media Player 11 and tried to boot, and it wouldn't start. I tried to boot from the program folder files, and still he wouldn't. I uninstalled and reinstalled several times and sometimes it worked once after installation then once you close it never starts again. What should I do to make it work. I need my music and videos.

  I can't get Windows MEdia Player to start once I install it. My PC crashed and I reinstalled XP Pro. and did all the updates that were needed. Then I installed Media Player 11 and tried to boot, and it wouldn't start. I tried to boot from the program folder files, and still he wouldn't. I uninstalled and reinstalled several times and sometimes it worked once after installation then once you close it never starts again. What should I do to make it work. I need my music and videos.

  ================================
  In some cases, there may be multiple instances of
  WMP running.

  Try to open the Task Manager and look for the instances
  from: wmplayer.exe and complete the process on each of them.

  Also... Take a look at the following article:

  (925704) when you try to use Windows
  Media Player 11, the program does not work
  Start or some user interface elements are empty
  http://support.Microsoft.com/kb/925704
  John Inzer - MS - MVP - digital media experience

• Slimware download files can be deleted after installation in the programs?

  Slimware download files can be deleted after installation in the programs?

  Hello

  Do not download in the first place.

  Read this:

  http://answers.Microsoft.com/en-us/protect/Forum/protect_other-protect_scanning/Driverupdate-from-Slimware-utilities/d016d4a2-7ac4-467e-B07B-59058e7827e2

  See you soon.

• Acrobat CC takes windows programs after installation and the change of the icons of other programs

  For about a year Acrobat DC returned to other Windows programs after installation and changed the icons of other programs.

  Then, I had to uninstall it in order to use the PC, Win 7 64 Pro. I.e. When you click Word, Acrobat DC opens and then report it cannot open the word file.

  I see no chanhes in the list of Standard programs.

  Same result with Cloud installion and leading direct download.

  Any suggestions?

  How we stop to resume my perpetual license CS6 creative cloud?

  https://forums.Adobe.com/thread/1584746

• [Solved] pc with xp home edition as the operating system does not start after installation of SP2 via automatic updates

  Hello everyone. After formatting my hard drive I reinstalled windows xp edition sp1 family and then installed the latest version of windows update agent. I have the auto update set to download the updates automatically and notify me when they are ready to be installed. Initially, he found 3 updates that I installed and rebooted. He concluded 58 updates. Again, I've installed and restarted. After that, we found ServicePack 2, I installed as well. But after the reboot, the pc does not start. What I get is the windows xp logo which discoloures after a few seconds and I don't see a bar moving from left to right. I left it like that for 3 hours, but nothing has changed. Also, it does not start in safe mode. I get a screen with red and green vertical lines in this case. Anyone know what's the problem? I'd appreciate any help. Thank you.

  I was finally able to solve this problem. That's what I did. I reinstalled windows xp home and followed the same path (but his definition of the automatic updates notify me before downloading or installing updates) until the automatic updates found in the new service pack 2. This time that I did not choose to download it. Instead I downloaded from here http://www.microsoft.com/en-us/download/details.aspx?id=28 and then started in safe mode and installed. I don't know one that makes the difference but service pack 2 has been successfully installed this time and tha pc was able to start after installation. Before that, I also downloaded and installed the latest versions of 2 drivers through drivermax. I mention this in the case where he has also made a difference. After the service pack 2 installation and restart, automatic updates will be found a few others brought up-to-date, but after installation and reboot, it found no others. I had to visit update windows Internet explore and search for updates it and managed to find other updates and finally SP3.

• Dual monitor boot problem with Windows 7 Professional 64 bit after installation of any graphics program like a game.

  I have built this platform with the help of the owner of a store of 4 cumputer teir 2 years ago. We initially put Windows Vista 32 bit on the system to Vista 64 bit unstable atm. For 2 years, the computer worked like a dream. Last week I made a clean wipe of windows vista and windows 7 professional 64-bit installed. The system has two monitors. The primary monitor is a sony bravia with 26 "led and secondary for watching movies is that a 55 '' led Samsung 1080 p 240 Hz. The graphics card is a geforce GTX 295 nividia. It has 12 GB of Ram and the CPU is an i7 965 @3.20.

  The problem I have is this. After the installation of any game average to work with windows 7, the screens to reset their resolutions automatically more than a few times as they are confused. Sometimes, I have to return the screen to its correct resolution after installation in full. Most of the games and then run fine. After installing the game or any game designed for win 7 startup of computers is all messed up for the monitors. After starting hand 26 "sets its resolution and then after about a second 30 pause the computer makes the sound (the double) that it is resolutuons to reset monitor again? After that this second reset about 1-2 minutes the computer is good to go, unless it sets the res evil. The problem is the computer has never done that with vista and it is very annoying say the least. It still freezes the installation of some games. The only way to resolve what I found is the restoration of the system. The computer starts normally and screen ground is defined once she has always been. The only problem is when you install another game, the problem is their new. This problem is worse in some games.

  The latest nvidia drivers have been installed. There is no conflict in the device with the exception of an old printer Manager. The two comes is set to 60 hertz. I searched all over the internet and there seems to be a problem with windows 7 without solution. I am at a loss. Any other information that you need let me know and I'll post it. Thank you!

  Hi ancientone618,

  It sounds almost as if there is a Windows update that is in conflict with your NVIDIA Driver Installer.  I would say to disable automatic updates of Windows to see if it might help:

  http://Windows.Microsoft.com/en-us/Windows7/turn-automatic-updating-on-or-off

  In addition, please see the article with some useful information:

  http://Windows.Microsoft.com/en-us/Windows7/work-and-play-better-with-multiple-monitors

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• After installation of Service Pack 1 for Vista 64 bits, Windows Security says Malware and firewalls are off.

  I recently reinstalled my copy of Vista 64 bit I hope to solve this problem that has been with me for a while.  Before I wiped and reloaded, Security Center Windows would alert me every day that my firewall protection and malware have been disabled.

  I use Kaspersky Internet Security, which is fully updated and works as it should.  I am able to activate Windows Firewall and bypass the firewall Kaspersky and that error to go away, however, I can't remove the error of malicious software.  I got all these errors directly after a restart after the installation of service pack 1.

  Under Windows Security Center it says, "Kaspersky Internet Security reports that it is turned off," under the heading for malware protection.  When I click on the button to activate under Windows Security, it goes through the steps who say do you trust this program, Yes, Yes, ok.  After choosing all the options of trust Kaspersky and activate this protection, he thinks about it a little, but always returned and said it's off.  It also has a green light saying that Windows Defender is actively protecting your computer.

  I think that my Internet Security Suite is successfully active in these areas and work I checked the menu, check that they work.  In my opinion, after installation of service pack 1 that something I have messed up in the statement that those programs are active or really uninstalled them.

  Even if I can get the only message that the Kaspersky firewall is disabled to disappear by enabling the Windows Firewall, which is not yet as I want.  I want the suite of internet security that I paid to be active and functional on the side of the Windows security features.

  I would appreciate any help with this problem by addressing why he continues to warn me that my protection malware and firewalls are disabled.  Thank you.

  Also install Windows Vista SP2 this problem could be solved, otherwise try to uninstall and reinstall Kaspersky and also, try to get the latest version of Kaspersky.

  If still the same issue please contact Kaspersky support.